Hi, I've added support for MX29F001T/B.
I'm not sure the proper way to submit a patch, I've just joined the mailing list recently.
I've only got the -T type, but I just tested it and it works with them. The attached files are the patch, the additional .c file (based on mx29f002.c, modified based on datasheet for mx29f001. The trial.txt is output of probe, read, erase, write on the MX29F001T.
I compiled and tested this all on an old Soyo SY-6BB [440BX, PIIX4]; It still boots after a read, erase, blank check, write... So it must have worked ;)
Hopefully I'm doing this the right way! Let me know if I'm not.
Mark
** Probe
flashrom v0.9.0-r694 No coreboot table found. Found chipset "Intel PIIX4/4E/4M", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... 299M loops per second, 100 myus = 349 us. OK. Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMD Am29F002(N)BB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMD Am29F002(N)BT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMD Am29F080B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT29C010A, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT49F002(N), 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT49F002(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMIC A25L40P, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMIC A49LF040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for EMST F49B002UA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for EON EN29F002(A)(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Fujitsu MBM29F004BC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Fujitsu MBM29F004TC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for Intel 28F001BX-B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Intel 28F001BX-T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x25, id2 0x9a Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x25, id2 0x9a Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX29F001T, 128 KB: probe_29f001: id1 0xc2, id2 0x18 Found chip "Macronix MX29F001T" (128 KB, Parallel) at physical address 0xfffe0000. Probing for Macronix MX29F001B, 128 KB: probe_29f001: id1 0xc2, id2 0x18 Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm29F0002T, 256 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for PMC Pm29F0002B, 256 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for PMC Pm39LV010, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for PMC Pm49FL002, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for PMC Pm49FL004, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0x25, id2 0x9a Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x25, id2 0x9a Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST29EE020A, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF002A/B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF003A/B, 384 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF004A/B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x25, id2 0x9a Probing for SST SST49LF008A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0x25, id2 0x9a Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M29F002T/NT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for ST M29W010B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M29W040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0x25, id2 0x9a Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x25, id2 0x9a Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x25, id2 0x9a Probing for ST M50LPW116, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SyncMOS S29C51001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SyncMOS S29C51002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SyncMOS S29C51004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for TI TMS29F002RB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for TI TMS29F002RT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0xc2, id2 0x18 Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W49F002U, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W49V002FA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: id1 0xc2, id2 0x18 Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: id1 0xc2, id2 0x18 Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom@flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard you tested. Thanks for your help! === No operations were specified.
** Read
flashrom v0.9.0-r694 No coreboot table found. Found chipset "Intel PIIX4/4E/4M", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... 298M loops per second, 100 myus = 348 us. OK. Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMD Am29F002(N)BB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMD Am29F002(N)BT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMD Am29F080B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT29C010A, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT49F002(N), 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT49F002(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMIC A25L40P, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMIC A49LF040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for EMST F49B002UA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for EON EN29F002(A)(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Fujitsu MBM29F004BC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Fujitsu MBM29F004TC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for Intel 28F001BX-B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Intel 28F001BX-T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x25, id2 0x9a Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x25, id2 0x9a Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX29F001T, 128 KB: probe_29f001: id1 0xc2, id2 0x18 Found chip "Macronix MX29F001T" (128 KB, Parallel) at physical address 0xfffe0000. Probing for Macronix MX29F001B, 128 KB: probe_29f001: id1 0xc2, id2 0x18 Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm29F0002T, 256 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for PMC Pm29F0002B, 256 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for PMC Pm39LV010, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for PMC Pm49FL002, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for PMC Pm49FL004, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0x25, id2 0x9a Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x25, id2 0x9a Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST29EE020A, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF002A/B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF003A/B, 384 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF004A/B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x25, id2 0x9a Probing for SST SST49LF008A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0x25, id2 0x9a Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M29F002T/NT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for ST M29W010B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M29W040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0x25, id2 0x9a Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x25, id2 0x9a Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x25, id2 0x9a Probing for ST M50LPW116, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SyncMOS S29C51001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SyncMOS S29C51002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SyncMOS S29C51004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for TI TMS29F002RB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for TI TMS29F002RT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0xc2, id2 0x18 Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W49F002U, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W49V002FA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: id1 0xc2, id2 0x18 Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: id1 0xc2, id2 0x18 Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom@flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard you tested. Thanks for your help! === Reading flash... done.
** Erase
flashrom v0.9.0-r694 No coreboot table found. Found chipset "Intel PIIX4/4E/4M", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... 299M loops per second, 100 myus = 349 us. OK. Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMD Am29F002(N)BB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMD Am29F002(N)BT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMD Am29F080B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT29C010A, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT49F002(N), 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT49F002(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMIC A25L40P, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMIC A49LF040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for EMST F49B002UA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for EON EN29F002(A)(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Fujitsu MBM29F004BC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Fujitsu MBM29F004TC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Intel 28F001BX-B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Intel 28F001BX-T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX29F001T, 128 KB: probe_29f001: id1 0xc2, id2 0x18 Found chip "Macronix MX29F001T" (128 KB, Parallel) at physical address 0xfffe0000. Probing for Macronix MX29F001B, 128 KB: probe_29f001: id1 0xc2, id2 0x18 Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm29F0002T, 256 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for PMC Pm29F0002B, 256 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for PMC Pm39LV010, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for PMC Pm49FL002, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for PMC Pm49FL004, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0xff, id2 0xff Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST29EE020A, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF002A/B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF003A/B, 384 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF004A/B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF008A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M29F002T/NT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29W010B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M29W040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50LPW116, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SyncMOS S29C51001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SyncMOS S29C51002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SyncMOS S29C51004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for TI TMS29F002RB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for TI TMS29F002RT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0xc2, id2 0x18 Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W49F002U, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W49V002FA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: id1 0xc2, id2 0x18 Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: id1 0xc2, id2 0x18 Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom@flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard you tested. Thanks for your help! === Erasing flash chip... SUCCESS.
**write
flashrom v0.9.0-r694 No coreboot table found. Found chipset "Intel PIIX4/4E/4M", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... 299M loops per second, 100 myus = 349 us. OK. Probing for AMD Am29F010A/B, 128 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMD Am29F002(N)BB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMD Am29F002(N)BT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMD Am29F016D, 2048 KB: probe_29f040b: id1 0xff, id2 0xff Probing for AMD Am29F040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMD Am29F080B, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMD Am29LV040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMD Am29LV081B, 1024 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for ASD AE49F2008, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT25DF021, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF041A, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF081, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF321A, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25DF641, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25F512B, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT25FS040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF041, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF081A, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26DF161A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT26F004, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT29C512, 64 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT29C010A, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT29C020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT29C040A, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT45CS1282, 16896 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB011D, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB021D, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB041D, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB081D, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB161D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321C, 4224 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB321D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT45DB642D, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Atmel AT49BV512, 64 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT49F002(N), 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Atmel AT49F002(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for AMIC A25L40P, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for AMIC A29002B, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for AMIC A29002T, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for AMIC A29040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for AMIC A49LF040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for EMST F49B002UA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Eon EN25B05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25B64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25D16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F05, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Eon EN25F32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON EN29F002(A)(N)B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for EON EN29F002(A)(N)T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Fujitsu MBM29F004BC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Fujitsu MBM29F004TC, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Fujitsu MBM29F400BC, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for Fujitsu MBM29F400TC, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for Intel 28F001BX-B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Intel 28F001BX-T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0x25, id2 0x9a Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0x25, id2 0x9a Probing for Macronix MX25L512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1005, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L2005, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L4005, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L8005, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1605, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L1635D, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3205, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L3235D, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L6405, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX25L12805, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix MX29F001T, 128 KB: probe_29f001: id1 0xc2, id2 0x18 Found chip "Macronix MX29F001T" (128 KB, Parallel) at physical address 0xfffe0000. Probing for Macronix MX29F001B, 128 KB: probe_29f001: id1 0xc2, id2 0x18 Probing for Macronix MX29F002B, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for Macronix MX29F002T, 256 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for Macronix MX29LV040, 512 KB: probe_29f002: id1 0xc2, id2 0x18 Probing for Numonyx M25PE10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE40, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Numonyx M25PE16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV010, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV020, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV040, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm25LV512, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC Pm29F0002T, 256 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for PMC Pm29F0002B, 256 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for PMC Pm39LV010, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for PMC Pm49FL002, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for PMC Pm49FL004, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0x25, id2 0x9a Probing for Spansion S25FL016A, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF016B, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF032B, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF040B.REMS, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST25VF080B, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST SST28SF040A, 512 KB: probe_28sf040: id1 0x25, id2 0x9a Probing for SST SST29EE010, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST29LE010, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST29EE020A, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST29LE020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39SF010A, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39SF020A, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39SF040, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF512, 64 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF010, 128 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF040, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST39VF080, 1024 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF002A/B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF003A/B, 384 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF004A/B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0x25, id2 0x9a Probing for SST SST49LF008A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0x25, id2 0x9a Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff Probing for ST M25P05-A, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P05.RES, 64 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10-A, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P10.RES, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P40-old, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P32, 4096 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P64, 8192 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M25P128, 16384 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST M29F002B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M29F002T/NT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M29F040B, 512 KB: probe_29f040b: id1 0xc2, id2 0x18 Probing for ST M29F400BT, 512 KB: probe_m29f400bt: id1 0x25, id2 0x2d Probing for ST M29W010B, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M29W040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xc2, id2 0x18 Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0x25, id2 0x9a Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0x25, id2 0x9a Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0x25, id2 0x9a Probing for ST M50LPW116, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS S29C31004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SyncMOS S29C51001T, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SyncMOS S29C51002T, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for SyncMOS S29C51004T, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for TI TMS29F002RB, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for TI TMS29F002RT, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W25x10, 128 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x20, 256 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x40, 512 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x80, 1024 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W25x16, 2048 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Winbond W29C011, 128 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W29C020C, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W29C040P, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W29EE011, 128 KB: Probing disabled for Winbond W29EE011 because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29EE011' if you have a board with this chip. Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0xc2, id2 0x18 Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W49F002U, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W49V002FA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc2, id2 0x18 Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: id1 0xc2, id2 0x18 Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: id1 0xc2, id2 0x18 Probing for Atmel unknown Atmel SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for EON unknown EON SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for Macronix unknown Macronix SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for PMC unknown PMC SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for SST unknown SST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. Probing for ST unknown ST SPI chip, 0 KB: skipped. Host bus type Non-SPI and chip bus type SPI are incompatible. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE Please email a report to flashrom@flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Programming page: address: 0x00000000address: 0x00001000address: 0x00002000address: 0x00003000address: 0x00004000address: 0x00005000address: 0x00006000address: 0x00007000address: 0x00008000address: 0x00009000address: 0x0000a000address: 0x0000b000address: 0x0000c000address: 0x0000d000address: 0x0000e000address: 0x0000f000address: 0x00010000address: 0x00011000address: 0x00012000address: 0x00013000address: 0x00014000address: 0x00015000address: 0x00016000address: 0x00017000address: 0x00018000address: 0x00019000address: 0x0001a000address: 0x0001b000address: 0x0001c000address: 0x0001d000address: 0x0001e000address: 0x0001f000 COMPLETE. Verifying flash... VERIFIED.
Hi Marko,
On 20.08.2009 11:01, Marko Kraljevic wrote:
Hi, I've added support for MX29F001T/B.
Nice!
I'm not sure the proper way to submit a patch, I've just joined the mailing list recently.
The following guidelines are for coreboot, but most of them apply to flashrom as well: http://www.coreboot.org/Development_Guidelines The really important part is about the Signed-off-by procedure.
I've only got the -T type, but I just tested it and it works with them. The attached files are the patch, the additional .c file (based on mx29f002.c, modified based on datasheet for mx29f001. The trial.txt is output of probe, read, erase, write on the MX29F001T.
We try to reuse as much code as possible and create new files only if absolutely needed, so if you find a function somewhere in the tree which already does what you want (even if it is for a totally different chip), please use it.
I compiled and tested this all on an old Soyo SY-6BB [440BX, PIIX4]; It still boots after a read, erase, blank check, write... So it must have worked ;)
Looks good. And for a first patch, you managed to not only write the code, but also test it. Some hints about proper submission procedure are mentioned above.
Instead of a full review, I just wrote all this stuff in a special wiki page so others can benefit from this as well: http://www.coreboot.org/Flashrom/Random_notes . Please read it and comment if something is unclear.
Now, on to the code you sent. The review may sound harsh, but please don't get discouraged. We try to merge patches after one or two iterations.
First, the probe function. If we take into account what the random notes say about ignored address bits, it makes sense to check the log if any other probe functions worked as well. Simply grep the log for 0xc2 and look which functions are listed. I've used the following command line:
# grep 0xc2 flashromlog.txt|sed "s/.*probe/probe/"|sort|uniq probe_29f001: id1 0xc2, id2 0x18 probe_29f002: id1 0xc2, id2 0x18 probe_29f040b: id1 0xc2, id2 0x18 probe_jedec: id1 0xc2, id2 0x18 probe_stm50flw0x0x: id1 0xc2, id2 0x18 probe_w39v040c: id1 0xc2, id2 0x18 probe_winbond_fwhub: id1 0xc2, id2 0x18
As you can see, there are quite a lot of probe functions which seem to work fine (and that's mostly because of the ignored address bits). probe_jedec is the most-used function in our tree, so if the sequence looks ok, please use that one.
The reset command you've added at the beginning of erase_29f001() makes sense, but AFAICS it would make sense in the original erase_29f002() function as well, so please change that one and use it afterwards. The resent command I'm talking about is chip_writeb(0xF0, bios + 0x555);
Last but not least, write_29f001() could maybe be replaced by write_29f002() as well if the chip ignores the high address bits for these commands as well.
Rest of the review is in the Random notes wiki page.
If this was a bit confusing, feel free to ask.
Regards, Carl-Daniel
Carl-Daniel Hailfinger wrote:
The following guidelines are for coreboot, but most of them apply to flashrom as well: http://www.coreboot.org/Development_Guidelines The really important part is about the Signed-off-by procedure.
Sounds good, I'll read through that.
We try to reuse as much code as possible and create new files only if absolutely needed, so if you find a function somewhere in the tree which already does what you want (even if it is for a totally different chip), please use it.
Excellent, I was thinking the same thing. No sense in having to maintain redundant code.
Looks good. And for a first patch, you managed to not only write the code, but also test it. Some hints about proper submission procedure are mentioned above.
Instead of a full review, I just wrote all this stuff in a special wiki page so others can benefit from this as well: http://www.coreboot.org/Flashrom/Random_notes . Please read it and comment if something is unclear.
thanks :)
As you can see, there are quite a lot of probe functions which seem to work fine (and that's mostly because of the ignored address bits). probe_jedec is the most-used function in our tree, so if the sequence looks ok, please use that one.
Ah, I hadn't realized that the high byte was ignored, that makes a big difference! If that's the case, then 29f002.c functions should work fine. I assume there is some difference between the 29f002 functions and the JEDEC ones, or else there would only be the JEDEC file. I'll look them both over this evening, and try flashing, and report back.
The reset command you've added at the beginning of erase_29f001() makes sense, but AFAICS it would make sense in the original erase_29f002() function as well, so please change that one and use it afterwards. The resent command I'm talking about is chip_writeb(0xF0, bios + 0x555);
I believe that was in the original file ['f002.c], and it's just commented out in my modified version ['f001.c]. If it is there [as in mx29f002.c], should there not be a small delay between the reset, and writing the erase commands? Either way, erase seems to function fine without the reset.
I guess I got a little too excited. I think I have a few more unlisted chips around here, I'll try and play with them in the future, and I'll make sure to check if existing functions will support them!
In the case where you have a file written for one chip - in this case mx29f002.c - and it is found to support multiple chips in the future, is it a good idea to rename it to something more descriptive? Perhaps in this case, it would be called mx29f00x.c ? Or is it better to keep the original name, do you think?
Mark
On 20.08.2009 16:44, Marko Kraljevic wrote:
Carl-Daniel Hailfinger wrote:
Instead of a full review, I just wrote all this stuff in a special wiki page so others can benefit from this as well: http://www.coreboot.org/Flashrom/Random_notes . Please read it and comment if something is unclear.
thanks :)
You're welcome. If there are further questions, I'd like to add the answers to the wiki as well. Saves me explaining that each time someone asks ;-)
Ah, I hadn't realized that the high byte was ignored, that makes a big difference! If that's the case, then 29f002.c functions should work fine. I assume there is some difference between the 29f002 functions and the JEDEC ones, or else there would only be the JEDEC file. I'll look them both over this evening, and try flashing, and report back.
To be honest, in the early days of flashrom development, people just copied stuff around and renamed it. That's why we still have loads of duplicated code. From time to time, I go through the tree and clean up the worst offenders... But the 29f002 stuff might as well be a copy of jedec or some other functions and nobody had the time to convert usage to jedec.
The reset command you've added at the beginning of erase_29f001() makes sense, but AFAICS it would make sense in the original erase_29f002() function as well, so please change that one and use it afterwards. The resent command I'm talking about is chip_writeb(0xF0, bios + 0x555);
I believe that was in the original file ['f002.c], and it's just commented out in my modified version ['f001.c]. If it is there [as in mx29f002.c], should there not be a small delay between the reset, and writing the erase commands?
Ah ok, I misread that. Basically, it makes sense to run reset between probing and any other command because probing for other chips may confuse your chip enough to warrant a reset.
Either way, erase seems to function fine without the reset.
I guess I got a little too excited. I think I have a few more unlisted chips around here, I'll try and play with them in the future, and I'll make sure to check if existing functions will support them!
Hey, excitement is good. You went the obvious route and you even tested everything. That's absolutely fine. And you caused me to write up some useful stuff about flashrom development. That's even better.
In the case where you have a file written for one chip - in this case mx29f002.c - and it is found to support multiple chips in the future, is it a good idea to rename it to something more descriptive? Perhaps in this case, it would be called mx29f00x.c ?
Renaming can be done, but we didn't do that often. We use grep to look for matching sequences... maybe not the best method, but it works mostly.
Or is it better to keep the original name, do you think?
We want to release flashrom 0.9.1 today or tomorrow. I'd rather keep the name until 0.9.1 is released. 0.9.1 is done and we're only waiting for testers. I guess including a few additional chips won't be a problem if we can finish that patch today ;-)
Regards, Carl-Daniel
On Thu, Aug 20, 2009 at 9:39 AM, Carl-Daniel Hailfingerc-d.hailfinger.devel.2006@gmx.net wrote:
You're welcome. If there are further questions, I'd like to add the answers to the wiki as well. Saves me explaining that each time someone asks ;-)
Good idea. How many regulars are there working on flashrom anyhow? Are the (mainly) a subset of coreboot developers?
I haven't successfully got coreboot to function on any of my machines yet, but I've only tried one. Perhaps I should dig one up that I *know* is supported, and go from there.
To be honest, in the early days of flashrom development, people just copied stuff around and renamed it. That's why we still have loads of duplicated code. From time to time, I go through the tree and clean up the worst offenders... But the 29f002 stuff might as well be a copy of jedec or some other functions and nobody had the time to convert usage to jedec.
Alright, that makes sense. A quick look at the 29f002 and 29f001 datasheets show the command set to be identical, so 29f002.c should definitely work. (gee, you think I would have checked that before). I'll take a closer look when I get home, and see if the JEDEC commands will work. If that's the case, I suppose we could drop the mx29f002.c file altogether, and just use the JEDEC functions. I'd like to have a mx29f002 chip to test that though, I'm not sure if I do.
Hey, excitement is good. You went the obvious route and you even tested everything. That's absolutely fine. And you caused me to write up some useful stuff about flashrom development. That's even better.
:-D
Renaming can be done, but we didn't do that often. We use grep to look for matching sequences... maybe not the best method, but it works mostly.
Or is it better to keep the original name, do you think?
We want to release flashrom 0.9.1 today or tomorrow. I'd rather keep the name until 0.9.1 is released. 0.9.1 is done and we're only waiting for testers. I guess including a few additional chips won't be a problem if we can finish that patch today ;-)
Today UTC+2? or today UTC-6 ? Are most of the developers in Europe? ( I believe both you and Uwe are in Germany, correct? )
I'm in central Canada. I guess it might have to wait then.
Mark
-
Carl-Daniel Hailfinger -
Marko Kraljevic