Supporting of Intel HM65

[pavel]

Hello!
I am using Parted Magic Live CD operation system in my laptop.
I want only *READ *information and use command in Konsole: "flashrom -r 
ASUS.def.iso -p internal:this_is_not_laptop >> error.txt"

I have get this error file:
***
error.txt
****
flashrom v0.9.6.1-r1564 on Linux 3.7.9-pmagic (i686)
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OK.
Found chipset "Intel HM65".
This chipset is marked as untested. If you are using an up-to-date version
of flashrom *and* were (not) able to successfully update your firmware 
with it,
then please email a report to [e-mail] including a verbose 
(-V) log.
Thank you!
Enabling flash write... WARNING: BIOS region SMM protection is enabled!
WARNING: SPI Configuration Lockdown activated.
FREG0: WARNING: Flash Descriptor region (0x00000000-0x00000fff) is 
read-only.
FREG2: WARNING: Management Engine region (0x00001000-0x0017ffff) is locked.
Please send a verbose log to [e-mail] if this board is not 
listed on
http://flashrom.org/Supported_hardware#Supported_mainboards yet.
Writes have been disabled. You can enforce write support with the
ich_spi_force programmer option, but it will most likely harm your hardware!
If you force flashrom you will get no support if something breaks.
OK.
Found Winbond flash chip "W25Q32" (4096 kB, SPI) at physical address 
0xffc00000.
Reading flash... FAILED.
***
*What is means???*
I have read "Support chipset" in 
http://www.flashrom.org/Supported_hardware and saw *"?"* symbol for 
*Intel HM65*.
Can I read flash in my laptop by your programm (flashrom v0.9.6.1-r1564)?
_________________
Pavel
Slipenchoock

[Stefan Tauner]

On Fri, 22 Mar 2013 13:23:34 +0400
pavel  wrote:
> Hello!
> I am using Parted Magic Live CD operation system in my laptop.
> I want only *READ *information and use command in Konsole: "flashrom -r 
> ASUS.def.iso -p internal:this_is_not_laptop >> error.txt"
>
> I have get this error file:
>
> error.txt
>
> flashrom v0.9.6.1-r1564 on Linux 3.7.9-pmagic (i686)
> flashrom is free software, get the source code at http://www.flashrom.org
>
> Calibrating delay loop... OK.
> Found chipset "Intel HM65".
> This chipset is marked as untested. If you are using an up-to-date version
> of flashrom *and* were (not) able to successfully update your firmware 
> with it,
> then please email a report to [e-mail] including a verbose 
> (-V) log.
> Thank you!
> Enabling flash write... WARNING: BIOS region SMM protection is enabled!
> WARNING: SPI Configuration Lockdown activated.
> FREG0: WARNING: Flash Descriptor region (0x00000000-0x00000fff) is 
> read-only.
> FREG2: WARNING: Management Engine region (0x00001000-0x0017ffff) is locked.
> Please send a verbose log to [e-mail] if this board is not 
> listed on
> http://flashrom.org/Supported_hardware#Supported_mainboards yet.
> Writes have been disabled. You can enforce write support with the
> ich_spi_force programmer option, but it will most likely harm your hardware!
> If you force flashrom you will get no support if something breaks.
> OK.
> Found Winbond flash chip "W25Q32" (4096 kB, SPI) at physical address 
> 0xffc00000.
> Reading flash... FAILED.
>
> *What is means???*
> I have read "Support chipset" in 
> http://www.flashrom.org/Supported_hardware and saw *"?"* symbol for 
> *Intel HM65*.
> Can I read flash in my laptop by your programm (flashrom v0.9.6.1-r1564)?

Sorry for the late reply. I have created a wiki page explaining this
stuff today: http://flashrom.org/ME