[HowardHo2021 DOS Port] RE: Changes made for FlashRom DOS port

Hi,

Thanks for your email. Unfortunately, I did not specifically write down the changes I made in a document. However, you may check the commit history at my “flashrom for DOS” port repository here https://github.com/HowardHo2021/flashrom-DOS-port . If you wish, you can clone that repository and follow the instructions I wrote in “README_DOS” to compile your own copy.

For future correspondence, please use [e-mail]   instead.

Thanks.

From: Rahngue NGARIERA  
Sent: Saturday, April 3, 2021 11:58 PM
Subject: Changes made for FlashRom DOS port

Hi HowardHo. I haven't seen your list of changes to the original FlashRom (to get a working DOS port) on your Git pages. Could you please post them there or email it to me? I'd very much like to know. 'Cause I wasn't able to get it done with the original FlashRom.

Thanks for your help,

Etonam.

PS:  As you advised me, I sent my Read/Probe failure email to FlashRom.org  And I'm waiting for their answer.

[Mike Banon]

Very interesting port. Does it work with a FreeDOS too?

On Sun, Apr 4, 2021 at 7:52 AM  wrote:
> Hi,
>
> Thanks for your email. Unfortunately, I did not specifically write down the changes I made in a document. However, you may check the commit history at my “flashrom for DOS” port repository here. If you wish, you can clone that repository and follow the instructions I wrote in “README_DOS” to compile your own copy.
>
> For future correspondence, please use [e-mail] instead.
>
> Thanks.
>
> From: Rahngue NGARIERA 
> Sent: Saturday, April 3, 2021 11:58 PM
> Subject: Changes made for FlashRom DOS port
>
> Hi HowardHo. I haven't seen your list of changes to the original FlashRom (to get a working DOS port) on your Git pages. Could you please post them there or email it to me? I'd very much like to know. 'Cause I wasn't able to get it done with the original FlashRom.
>
> Thanks for your help,
>
> Etonam.
>
> PS:  As you advised me, I sent my Read/Probe failure email to FlashRom.org  And I'm waiting for their answer.
>
> flashrom mailing list -- [e-mail]
> To unsubscribe send an email to [e-mail]

[Howard Ho]

Hi,

Yes, I have tested with FreeDOS bootable USB created using Rufus. However,
thus far I have only tested it on a MSI Z390-A PRO motherboard, where it
was able to program the latest BIOS (1.D0).

Thanks,

Howard

On Sun, Apr 4, 2021 at 9:10 AM Mike Banon  wrote:
> Very interesting port. Does it work with a FreeDOS too?
>
> On Sun, Apr 4, 2021 at 7:52 AM  wrote:
> > Hi,
> >
> > Thanks for your email. Unfortunately, I did not specifically write down
>
> the changes I made in a document. However, you may check the commit history
> at my “flashrom for DOS” port repository here. If you wish, you can clone
> that repository and follow the instructions I wrote in “README_DOS” to
> compile your own copy.
> > For future correspondence, please use [e-mail] instead.
> >
> > Thanks.
> >
> > From: Rahngue NGARIERA 
> > Sent: Saturday, April 3, 2021 11:58 PM
> > Subject: Changes made for FlashRom DOS port
> >
> > Hi HowardHo. I haven't seen your list of changes to the original
>
> FlashRom (to get a working DOS port) on your Git pages. Could you please
> post them there or email it to me? I'd very much like to know. 'Cause I
> wasn't able to get it done with the original FlashRom.
> > Thanks for your help,
> >
> > Etonam.
> >
> > PS:  As you advised me, I sent my Read/Probe failure email to
>
> FlashRom.org  And I'm waiting for their answer.
> > flashrom mailing list -- [e-mail]
> > To unsubscribe send an email to [e-mail]