On Sat, 18 Apr 2015 12:59:32 +0300 "nicolae788 ." nicolae788@gmail.com wrote:
Hello, i am wondering how can i make flashrom to look at the isa/pci/agp/pcie video card in order to flash the bios of it.
Thank you
Hi,
long time ago there were some video cards supported in flashrom. They are not much different to other supported PCI(E) programmers in flashrom. After all, they are just an interface to a flash chip like a network card is for its boot flash. The problem is that no one cared any longer for graphics cards and that the interface changed and became way more complicated.
So "making flashrom to look at * card in order to flash the bios of it" does not cut it. You need to reverse engineer the correct access pattern and reimplement it in a flashrom programmer module.
Hi, thank you very much for your reply. I understand that flashrom currently doesn't have the posibility to access the pcie slot, for example, and detect the chip on the vga board in order to write it. However i found a flashrom, apparently modified for ati vga cards...do you want me to send it to you and check it?
Alex On Apr 18, 2015 3:47 PM, "Stefan Tauner" stefan.tauner@alumni.tuwien.ac.at wrote:
On Sat, 18 Apr 2015 12:59:32 +0300 "nicolae788 ." nicolae788@gmail.com wrote:
Hello, i am wondering how can i make flashrom to look at the isa/pci/agp/pcie video card in order to flash the bios of it.
Thank you
Hi,
long time ago there were some video cards supported in flashrom. They are not much different to other supported PCI(E) programmers in flashrom. After all, they are just an interface to a flash chip like a network card is for its boot flash. The problem is that no one cared any longer for graphics cards and that the interface changed and became way more complicated.
So "making flashrom to look at * card in order to flash the bios of it" does not cut it. You need to reverse engineer the correct access pattern and reimplement it in a flashrom programmer module.
-- Kind regards/Mit freundlichen Grüßen, Stefan Tauner