Support MB Gigabyte GA-EP31-DS3L

[Vít Škaban]

Chips:
W28X80 and SST25VF080B
 
Vendor: Gigabyte 
Mainboard: GA-EP31-DS3L
Required option: none
Status: OK
 
Thank you for this program. It was very helful for me in reparing laptop BIOS via this mainboard.
 
Vit Skraban
Czech Republic 
EU

[Stefan Tauner]

On Sun, 22 Jan 2012 23:25:46 +0100
"Vít Škaban"  wrote:
> Chips:
> W28X80 and SST25VF080B
>  
> Vendor: Gigabyte 
> Mainboard: GA-EP31-DS3L
> Required option: none
> Status: OK
>  
> Thank you for this program. It was very helful for me in reparing laptop BIOS via this mainboard.

Hello Vít,

thanks for your report!
There are 3 different revisions of that board listed on the vendor
page, which one is yours? Could you please also send the verbose output
of flashrom running on it (just probing i.e. flashrom -V is enough, a
full erase/write is always nicer though).

[Vít Škaban]

Revision 2.1
I sending screenshot and verbose text document with SST25VF080B.
If you would like to get information about W28X80, I can do it.
 
Vit Skraban
______________________________________________________________
> Od: "Stefan Tauner" 
> Komu: "Vít Škaban" 
> Datum: 24.01.2012 04:01
> Předmět: Re: [flashrom] Support MB Gigabyte GA-EP31-DS3L

On Sun, 22 Jan 2012 23:25:46 +0100
"Vít Škaban"  wrote:
> Chips:
> W28X80 and SST25VF080B
>  
> Vendor: Gigabyte 
> Mainboard: GA-EP31-DS3L
> Required option: none
> Status: OK
>  
> Thank you for this program. It was very helful for me in reparing laptop BIOS via this mainboard.

Hello Vít,

thanks for your report!
There are 3 different revisions of that board listed on the vendor
page, which one is yours? Could you please also send the verbose output
of flashrom running on it (just probing i.e. flashrom -V is enough, a
full erase/write is always nicer though).

[Stefan Tauner]

On Wed, 25 Jan 2012 21:39:15 +0100
"Vít Škaban"  wrote:
> Revision 2.1
> I sending screenshot and verbose text document with SST25VF080B.
> If you would like to get information about W28X80, I can do it.

Hello Vít,

thanks for the clarification! I have marked the mainboard as tested and
will commit that later together with other small changes.
Please do not send further screenshots to the mailing list. They dont
offer any advantages over text logs, but are much bigger.