Re: [flashrom] Intel S5000PAL: Flash Not Found

[Sean Everson]

All,

I have a number of Intel S5000PAL motherboards that I would like to
use FLASHROM to manage if at all possible.  According to the Intel
Docs at:

http://download.intel.com/support/motherboards/server/s5000pal/sb/s5000pal_s...

The motherboard has the 6321ESB chipset which is listed as supported
on the flashrom.org wiki page.  When I try to use FLASHROM to read the
flash I get an error message that the flash is not found.  Can someone
provide me with some guidance on what additional information or steps
I can take to investigate this further?

I have pasted the flashrom -V output here:

http://pastebin.com/Rr24eXa5

Thanks for your help!

--Sean

On Wed, Mar 19, 2014 at 12:18 PM, Sean Everson  wrote:
> All,
>
> I have a number of Intel S5000PAL motherboards that I would like to use
> FLASHROM to manage if at all possible.  According to the Intel Docs at:
>
> http://download.intel.com/support/motherboards/server/s5000pal/sb/s5000pal_s...
>
> The box contains the 6321ESB chipset which is listed as supported on the
> flashrom.org wiki page.
>
> When I try to use FLASHROM to read the flash I get an error message that the
> flash is not found.  Can someone provide me with some guidance on what
> additional information or steps I can take to investigate this further?
>
> I am including the output from flashrom -V below.
>
> Thanks for your help!
>
> --Sean
>
> # ./flashrom -V -p internal -r /tmp/bios.bin
>
> flashrom v0.9.7-r1764 on Linux 2.6.32.24 (x86_64)
>
> flashrom is free software, get the source code at http://www.flashrom.org
>
> flashrom was built with libpci 3.2.1, GCC 4.7.1, little endian
>
> Command line (5 args): ./flashrom -V -p internal -r /tmp/bios.bin
>
> Calibrating delay loop... OS timer resolution is 1 usecs, 2824M loops per
> second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 999 us, 10000 myus =
> 10025 us, 4 myus = 4 us, OK.
>
> Initializing internal programmer
>
> No coreboot table found.
>
> Using Internal DMI decoder.
>
> DMI string chassis-type: "Rack Mount Chassis"
>
> DMI string system-manufacturer: "Intel"
>
> DMI string system-product-name: "T5000PAL"
>
> DMI string system-version: "Not Specified"
>
> DMI string baseboard-manufacturer: "Intel"
>
> DMI string baseboard-product-name: "T5000PAL0 "
>
> DMI string baseboard-version: "FRU Ver 0.05"
>
> W836xx enter config mode worked or we were already in config mode. W836xx
> leave config mode had no effect.
>
> Active config mode, unknown reg 0x20 ID: f2.
>
> Please send the output of "flashrom -V" to
>
> [e-mail] with W836xx: your board name: flashrom -V
>
> as the subject to help us finish support for your Super I/O. Thanks.
>
> Found chipset "Intel 631xESB/632xESB/3100" with PCI ID 8086:2670. Enabling
> flash write...
>
> 0xfff80000/0xffb80000 FWH IDSEL: 0x0
>
> 0xfff00000/0xffb00000 FWH IDSEL: 0x0
>
> 0xffe80000/0xffa80000 FWH IDSEL: 0x0
>
> 0xffe00000/0xffa00000 FWH IDSEL: 0x0
>
> 0xffd80000/0xff980000 FWH IDSEL: 0x0
>
> 0xffd00000/0xff900000 FWH IDSEL: 0x0
>
> 0xffc80000/0xff880000 FWH IDSEL: 0x0
>
> 0xffc00000/0xff800000 FWH IDSEL: 0x0
>
> 0xff700000/0xff300000 FWH IDSEL: 0x4
>
> 0xff600000/0xff200000 FWH IDSEL: 0x5
>
> 0xff500000/0xff100000 FWH IDSEL: 0x6
>
> 0xff400000/0xff000000 FWH IDSEL: 0x7
>
> 0xfff80000/0xffb80000 FWH decode enabled
>
> 0xfff00000/0xffb00000 FWH decode enabled
>
> 0xffe80000/0xffa80000 FWH decode enabled
>
> 0xffe00000/0xffa00000 FWH decode enabled
>
> 0xffd80000/0xff980000 FWH decode enabled
>
> 0xffd00000/0xff900000 FWH decode enabled
>
> 0xffc80000/0xff880000 FWH decode enabled
>
> 0xffc00000/0xff800000 FWH decode enabled
>
> 0xff700000/0xff300000 FWH decode disabled
>
> 0xff600000/0xff200000 FWH decode disabled
>
> 0xff500000/0xff100000 FWH decode disabled
>
> 0xff400000/0xff000000 FWH decode disabled
>
> Maximum FWH chip size: 0x400000 bytesSPI Read Configuration: prefetching
> disabled, caching enabled,
>
> BIOS_CNTL = 0x03: BIOS Lock Enable: enabled, BIOS Write Enable: enabled
>
> Warning: Setting Bios Control at 0xdc from 0x02 to 0x01 failed.
>
> New value is 0x03.
>
> OK.
>
> The following protocols are supported: FWH.
>
> Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1
> is normal flash content, id2 is normal flash content
>
> Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x9b, id2 0x0c, id1 is
> normal flash content, id2 is normal flash content
>
> Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xc9, id2 0x78, id1
> parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0,
> id1 is normal flash content, id2 is normal flash content
>
> Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x9b, id2 0x0c,
> id1 is normal flash content, id2 is normal flash content
>
> Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xc9, id2 0x78, id1
> parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xea, id2
> 0xd0, id1 is normal flash content, id2 is normal flash content
>
> Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xff, id2
> 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash
> content
>
> Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x9b, id2
> 0x0c, id1 is normal flash content, id2 is normal flash content
>
> Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x9b, id2 0x0c, id1
> is normal flash content, id2 is normal flash content
>
> Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xc9, id2
> 0x78, id1 parity violation, id1 is normal flash content, id2 is normal flash
> content
>
> Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xc9, id2 0x78, id1
> parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0x00, id2 0x00, id1
> parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x9b, id2 0x0c, id1 is
> normal flash content, id2 is normal flash content
>
> Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x9b, id2 0x0c, id1 is
> normal flash content, id2 is normal flash content
>
> Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xc9, id2 0x78, id1
> parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xc9, id2 0x78, id1
> parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is
> normal flash content, id2 is normal flash content
>
> Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0x00, id2 0x00, id1
> parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x9b, id2 0x0c, id1 is
> normal flash content, id2 is normal flash content
>
> Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xc9, id2 0x78, id1
> parity violation, id1 is normal flash content, id2 is normal flash content
>
> Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x9b, id2
> 0x0c, id1 is normal flash content, id2 is normal flash content
>
> Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x9b, id2
> 0x0c, id1 is normal flash content, id2 is normal flash content
>
> Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x9b, id2
> 0x0c, id1 is normal flash content, id2 is normal flash content
>
> Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xea, id2
> 0xd0, id1 is normal flash content, id2 is normal flash content
>
> Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xc9, id2
> 0x78, id1 parity violation, id1 is normal flash content, id2 is normal flash
> content
>
> Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1
> 0x9b, id2 0x0c, id1 is normal flash content, id2 is normal flash content
>
> No EEPROM/flash device found.
>
> Note: flashrom can never write if the flash chip isn't found automatically.
>
> Restoring PCI config space for 00:1f:0 reg 0xdc