Re: [flashrom] "S25FL128S......0" on usbblaster_spi

[Stefan Tauner]

On Sat, 31 May 2014 13:14:08 -0400
Liviu Toma  wrote:
> Hi,
>
> Thanks very much for the reply. Just to clarify, I am not concerned, I was
> able to flash the chip. I was merely sending the info as instructed by the
> tool.

Oh, but I am ;) It should work at first try and this is a bug.
> The inscription on the chip read Spansion FL128PIF (the next line reads
> 92599012 but I assume that's some date / serial number).

Thank you very much. So it is actually the predecessor of S25FL128S,
namely the S25FL128P. I'll take a look at the differences/possible
problems and how/if the chips could be told apart by software. Would
you be able and willing to test a patch for that?

"S25FL128S......0" on usbblaster_spi

[Liviu Toma]

Absolutely, I will help any way I can.

Liviu
On May 31, 2014 1:29 PM, "Stefan Tauner" 
wrote:
> On Sat, 31 May 2014 13:14:08 -0400
> Liviu Toma  wrote:
> > Hi,
> >
> > Thanks very much for the reply. Just to clarify, I am not concerned, I
>
> was
> > able to flash the chip. I was merely sending the info as instructed by
>
> the
> > tool.
>
> Oh, but I am ;) It should work at first try and this is a bug.
> > The inscription on the chip read Spansion FL128PIF (the next line reads
> > 92599012 but I assume that's some date / serial number).
>
> Thank you very much. So it is actually the predecessor of S25FL128S,
> namely the S25FL128P. I'll take a look at the differences/possible
> problems and how/if the chips could be told apart by software. Would
> you be able and willing to test a patch for that?