Hello , Device programming is successful with flashrom, but I wanted to report this and see if there should be any concern here..
flashrom v0.9.7-r1782 on Linux 3.0.0-19-generic (i686) flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OK. Found chipset "Intel ICH8M". Enabling flash write... BBAR offset is unknown on ICH8! OK. Found GigaDevice flash chip "GD25Q80(B)" (1024 kB, SPI) at physical address 0xfff00000. Trying to unmap a nonexisting mapping! Please report a bug at flashrom@flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom@flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom@flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom@flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom@flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom@flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom@flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom@flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom@flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom@flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom@flashrom.org Trying to unmap a nonexisting mapping! Please report a bug at flashrom@flashrom.org Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... VERIFIED.
Script started, file is /root/flashrom-2018-08-23T1626-003_10b.rom.log Script started, file is /root/flashrom-2018-08-23T1626-003_10b.rom.log Script done, file is /root/flashrom-2018-08-23T1626-003_10b.rom.log
Sleeping 5 sec and shutting down to trigger BIOS flash.
Best Regards
Clay Dean Vice President, Operations
c.dean@wegener.commailto:c.dean@wegener.com 770 623 0096 x4419 Office 706 878 8115 Mobile claydean Skype P Please think about our environment before considering printing this mail. This email and the associated attachments may contain information that is proprietary, privileged, confidential or otherwise protected from disclosure. If you are not the intended recipient or otherwise have received this message in error, you are not authorized to read, print, retain, copy or disseminate this message or any part of it. If you are not the intended recipient or otherwise have received this message in error, please notify us immediately, destroy any paper copies and delete all electronic files of the message
________________________________ Disclaimer: This message is intended only for the use of the individual or entity to which it is addressed and may contain information which is privileged, confidential, proprietary, or exempt from disclosure under applicable law. If you are not the intended recipient or the person responsible for delivering the message to the intended recipient, you are strictly prohibited from disclosing, distributing, copying, or in any way using this message. If you have received this communication in error, please notify the sender and destroy and delete any copies you may have received.
-
Clay Dean