On Thu, 18 Jul 2013 11:31:12 +0200 san san@plusnet.pl wrote:
Ok, i found my compiled version does not work. Will check this out later.
Flashrom.log and other possibly useful informations can be found here http://e-san.info/Flashrom-P4/
I am quite sure that you will need a board enable that changes the state of the WP and TBL pins. You can verify that by measuring the voltage of said pins against ground. You can read more about board enables here: http://flashrom.org/Board_Enable
Yes, i did try it, but can not find any useful informations. Still can not write. Can not find any gpio ports and anything to use with pciset. Found lpt port and files according to this page are uploaded on server.
Please, help. 19 lip 2013 10:16, "Stefan Tauner" stefan.tauner@student.tuwien.ac.at napisał(a):
On Thu, 18 Jul 2013 11:31:12 +0200 san san@plusnet.pl wrote:
Ok, i found my compiled version does not work. Will check this out later.
Flashrom.log and other possibly useful informations can be found here http://e-san.info/Flashrom-P4/
I am quite sure that you will need a board enable that changes the state of the WP and TBL pins. You can verify that by measuring the voltage of said pins against ground. You can read more about board enables here: http://flashrom.org/Board_Enable
-- Kind regards/Mit freundlichen Grüßen, Stefan Tauner