Supermicro PDSMi Vendor product page: http://www.supermicro.com/products/motherboard/PD/E7230/PDSMi.cfm
======================================================================== Script started on Tue 26 May 2015 02:37:38 PM PDT root@foo:/tmp/flashrom# ./flashrom -V --programmer internal -r foo.bin flashrom v0.9.8-r1890 on Linux 2.6.32-5-amd64 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org
flashrom was built with libpci 3.2.1, GCC 4.9.2, little endian Command line (5 args): ./flashrom -V --programmer internal -r foo.bin Calibrating delay loop... OS timer resolution is 1 usecs, 1119M loops per second, 10 myus = 10 us, 100 myus = 94 us, 1000 myus = 935 us, 10000 myus = 10134 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. Using Internal DMI decoder. DMI string chassis-type: "Other" DMI chassis-type is not specific enough. DMI string system-manufacturer: "Supermicro" DMI string system-product-name: "PDSMi" DMI string system-version: "0123456789" DMI string baseboard-manufacturer: "Supermicro" DMI string baseboard-product-name: "PDSMi " DMI string baseboard-version: "PCB Version" Found Winbond Super I/O, id 0x52 ======================================================================== WARNING! You may be running flashrom on an unsupported laptop. We could not detect this for sure because your vendor has not setup the SMBIOS tables correctly. You can enforce execution by adding '-p internal:laptop=this_is_not_a_laptop' to the command line, but please read the following warning if you are not sure.
Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See the manpage and http://www.flashrom.org/Laptops for details.
If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== Aborting. Error: Programmer initialization failed. root@foo:/tmp/flashrom# exit exit
Script done on Tue 26 May 2015 02:38:03 PM PDT ========================================================================
Then if I force with 'internal:laptop=this_is_not_a_laptop'
======================================================================== Script started on Tue 26 May 2015 02:40:39 PM PDT root@foo:/tmp/flashrom# ./flashrom -V -p internal:laptop=this_is_not_a_laptop -r foo.bin flashrom v0.9.8-r1890 on Linux 2.6.32-5-amd64 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org
flashrom was built with libpci 3.2.1, GCC 4.9.2, little endian Command line (5 args): ./flashrom -V -p internal:laptop=this_is_not_a_laptop -r foo.bin Calibrating delay loop... OS timer resolution is 1 usecs, 1109M loops per second, 10 myus = 10 us, 100 myus = 99 us, 1000 myus = 1023 us, 10000 myus = 10171 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. Using Internal DMI decoder. DMI string chassis-type: "Other" DMI chassis-type is not specific enough. DMI string system-manufacturer: "Supermicro" DMI string system-product-name: "PDSMi" DMI string system-version: "0123456789" DMI string baseboard-manufacturer: "Supermicro" DMI string baseboard-product-name: "PDSMi " DMI string baseboard-version: "PCB Version" Found Winbond Super I/O, id 0x52 ======================================================================== WARNING! You may be running flashrom on an unsupported laptop. We could not detect this for sure because your vendor has not setup the SMBIOS tables correctly. You can enforce execution by adding '-p internal:laptop=this_is_not_a_laptop' to the command line, but please read the following warning if you are not sure.
Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See the manpage and http://www.flashrom.org/Laptops for details.
If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== Proceeding anyway because user forced us to. Found chipset "Intel ICH7/ICH7R" with PCI ID 8086:27b8. Enabling flash write... Root Complex Register Block address = 0xfed1c000 GCS = 0xc65: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (LPC) Top Swap: not enabled 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode enabled 0xff600000/0xff200000 FWH decode enabled 0xff500000/0xff100000 FWH decode enabled 0xff400000/0xff000000 FWH decode enabled Maximum FWH chip size: 0x100000 bytes SPI Read Configuration: prefetching disabled, caching enabled, BIOS_CNTL = 0x01: BIOS Lock Enable: disabled, BIOS Write Enable: enabled SPIBAR = 0x00007fd2ea724000 + 0x3020 0x00: 0x0001 (SPIS) 0x02: 0x4360 (SPIC) 0x04: 0x00000000 (SPIA) 0x50: 0x00000000 (BBAR) 0x54: 0x0004 (PREOP) 0x56: 0x0000 (OPTYPE) 0x58: 0x00000005 (OPMENU) 0x5c: 0x00000000 (OPMENU+4) 0x60: 0x00000000 (PBR0) 0x64: 0x00000000 (PBR1) 0x68: 0x00000000 (PBR2) Programming OPCODES... done OK. The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 4). Probing for AMIC A25L05PU, 64 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 4). Probing for AMIC A25L10PT, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 4). Probing for AMIC A25L10PU, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 4). Probing for AMIC A25L20PT, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 4). Probing for AMIC A25L20PU, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 4). Probing for AMIC A25L40PT, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 4). Probing for AMIC A25L40PU, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 4). Probing for AMIC A25L80P, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 4). Probing for AMIC A25L16PT, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 4). Probing for AMIC A25L16PU, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 4). Probing for AMIC A25L512, 64 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for AMIC A25L010, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for AMIC A25L020, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for AMIC A25L040, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for AMIC A25L080, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for AMIC A25L016, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for AMIC A25L032, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for AMIC A25LQ16, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for AMIC A25LQ64, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT25DF021, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT25DF041A, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT25DF081, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT25DF081A, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT25DF161, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT25DF321, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT25DF321A, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT25DF641(A), 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT25DL081, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT25DL161, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT25DQ161, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT25F512, 64 kB: Error: SCIP never cleared! Running OPCODE 0x15 failed (payload length was 2). Probing for Atmel AT25F512A, 64 kB: Error: SCIP never cleared! Running OPCODE 0x15 failed (payload length was 2). Probing for Atmel AT25F512B, 64 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT25F1024(A), 128 kB: Error: SCIP never cleared! Running OPCODE 0x15 failed (payload length was 2). Probing for Atmel AT25F2048, 256 kB: Error: SCIP never cleared! Running OPCODE 0x15 failed (payload length was 2). Probing for Atmel AT25F4096, 512 kB: Error: SCIP never cleared! Running OPCODE 0x15 failed (payload length was 2). Probing for Atmel AT25FS010, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT25FS040, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT26DF041, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT26DF081A, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT26DF161, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT26DF161A, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT26F004, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT45CS1282, 16896 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT45DB011D, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT45DB021D, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT45DB041D, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT45DB081D, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT45DB161D, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT45DB321C, 4224 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT45DB321D, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT45DB321E, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Atmel AT45DB642D, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for ESMT F25L008A, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for ESMT F25L32PA, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B05, 64 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B05T, 64 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25P05, 64 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B10, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B10T, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25P10, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B20, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B20T, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25P20, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B40, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B40T, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25P40, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B80, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B80T, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25P80, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B16, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B16T, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25P16, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B32, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B32T, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25P32, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B64, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25B64T, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25P64, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25F05, 64 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25F10, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25F20, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25F40, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25F80, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25F16, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25F32, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25F64, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25Q40, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25Q80(A), 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25Q16, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25Q32(A/B), 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25Q64, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25Q128, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25QH16, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25QH32, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25QH64, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25QH128, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25S10, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25S20, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25S40, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25S80, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25S16, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25S32, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon EN25S64, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25LQ40, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25LQ80, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25LQ16, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25LQ32, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25LQ64(B), 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25LQ128, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25Q512, 64 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25Q10, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25Q20(B), 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25Q40(B), 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25Q80(B), 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25Q16(B), 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25Q32(B), 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25Q64(B), 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25Q128B, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for GigaDevice GD25T80, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Intel 25F160S33B8, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Intel 25F160S33T8, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Intel 25F320S33B8, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Intel 25F320S33T8, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Intel 25F640S33B8, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Intel 25F640S33T8, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX23L1654, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX23L3254, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX23L6454, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX23L12854, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L2005(C)/MX25L2006E, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L4005(A/C)/MX25L4006E, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L8005/MX25L8006E/MX25L8008E/MX25V8005, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L1605, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L1605A/MX25L1606E/MX25L1608E, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L1605D/MX25L1608D/MX25L1673E, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L1635D, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L1635E, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L3205(A), 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L3206E/MX25L3208E, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L3273E, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L3235D, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L6405, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L6405D, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L6406E/MX25L6408E, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L6436E/MX25L6445E/MX25L6465E/MX25L6473E, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L12805D, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L12835F/MX25L12845E/MX25L12865E, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25U1635E, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25U3235E/F, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25U6435E/F, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25U12835F, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix MX25L6495F, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25P05-A, 64 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25P05, 64 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Error: SCIP never cleared! Running OPCODE 0x90 failed at address 0x000000 (payload length was 2). Error: SCIP never cleared! Running OPCODE 0xab failed at address 0x000000 (payload length was 1). Probing for Micron/Numonyx/ST M25P10-A, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25P10, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Error: SCIP never cleared! Running OPCODE 0x90 failed at address 0x000000 (payload length was 2). Error: SCIP never cleared! Running OPCODE 0xab failed at address 0x000000 (payload length was 1). Probing for Micron/Numonyx/ST M25P20, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Error: SCIP never cleared! Running OPCODE 0x90 failed at address 0x000000 (payload length was 2). Error: SCIP never cleared! Running OPCODE 0xab failed at address 0x000000 (payload length was 1). Probing for Micron/Numonyx/ST M25P40, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Error: SCIP never cleared! Running OPCODE 0x90 failed at address 0x000000 (payload length was 2). Error: SCIP never cleared! Running OPCODE 0xab failed at address 0x000000 (payload length was 1). Probing for Micron/Numonyx/ST M25P80, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25P16, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25P32, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25P64, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25P128, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25PE10, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25PE20, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25PE40, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25PE80, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25PE16, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25PX80, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25PX16, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25PX32, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M25PX64, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M45PE10, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M45PE20, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M45PE40, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M45PE80, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST M45PE16, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST N25Q016, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Nantronics N25S10, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Nantronics N25S20, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Nantronics N25S40, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Nantronics N25S80, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Nantronics N25S16, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for PMC Pm25LD256C, 32 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for PMC Pm25LD512(C), 64 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for PMC Pm25LD010(C), 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for PMC Pm25LD020(C), 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for PMC Pm25LD040(C), 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for PMC Pm25LV512(A), 64 kB: Error: SCIP never cleared! Running OPCODE 0xab failed at address 0x000000 (payload length was 2). Probing for PMC Pm25LV010, 128 kB: Error: SCIP never cleared! Running OPCODE 0xab failed at address 0x000000 (payload length was 2). Probing for PMC Pm25LV010A, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for PMC Pm25LV020, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for PMC Pm25LV040, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for PMC Pm25LV080B, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for PMC Pm25LV016B, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Sanyo LE25FW106, 128 kB: Error: SCIP never cleared! Running OPCODE 0xab failed at address 0x000000 (payload length was 2). Probing for Sanyo LE25FW406A, 512 kB: Error: SCIP never cleared! Running OPCODE 0xab failed at address 0x000000 (payload length was 2). Probing for Sanyo LE25FU406B, 512 kB: Error: SCIP never cleared! Running OPCODE 0xab failed at address 0x000000 (payload length was 2). Probing for Sanyo LE25FW203A, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Sanyo LE25FW403A, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Sanyo LE25FW418A, 512 kB: Error: SCIP never cleared! Running OPCODE 0xab failed at address 0x000000 (payload length was 2). Probing for Sanyo LE25FW806, 1024 kB: Error: SCIP never cleared! Running OPCODE 0xab failed at address 0x000000 (payload length was 2). Probing for Sanyo LE25FW808, 1024 kB: Error: SCIP never cleared! Running OPCODE 0xab failed at address 0x000000 (payload length was 2). Probing for Spansion S25FL004A, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL008A, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL016A, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL032A/P, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL064A/P, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL204K, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL208K, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL116K/S25FL216K, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL132K, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL164K, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL127S-64kB, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL127S-256kB, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL128P......0, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL128P......1, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL128S......0, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL128S......1, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL129P......0, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Spansion S25FL129P......1, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for SST SST25LF020A, 256 kB: Error: SCIP never cleared! Running OPCODE 0x90 failed at address 0x000000 (payload length was 2). Probing for SST SST25LF040A, 512 kB: Error: SCIP never cleared! Running OPCODE 0xab failed at address 0x000000 (payload length was 2). Probing for SST SST25LF080(A), 1024 kB: Error: SCIP never cleared! Running OPCODE 0xab failed at address 0x000000 (payload length was 2). Probing for SST SST25VF512(A), 64 kB: Error: SCIP never cleared! Running OPCODE 0x90 failed at address 0x000000 (payload length was 2). Probing for SST SST25VF010(A), 128 kB: Error: SCIP never cleared! Running OPCODE 0x90 failed at address 0x000000 (payload length was 2). Probing for SST SST25VF020, 256 kB: Error: SCIP never cleared! Running OPCODE 0x90 failed at address 0x000000 (payload length was 2). Probing for SST SST25VF020B, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for SST SST25VF040, 512 kB: Error: SCIP never cleared! Running OPCODE 0x90 failed at address 0x000000 (payload length was 2). Probing for SST SST25VF040B, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for SST SST25VF040B.REMS, 512 kB: Error: SCIP never cleared! Running OPCODE 0x90 failed at address 0x000000 (payload length was 2). Probing for SST SST25VF080B, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for SST SST25VF016B, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for SST SST25VF032B, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for SST SST25VF064C, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for SST SST25WF512, 64 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for SST SST25WF010, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for SST SST25WF020, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for SST SST25WF040, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for SST SST25WF080, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25Q40.V, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25Q80.V, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25Q16.V, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25Q32.V, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25Q64.V, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25Q128.V, 16384 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25Q20.W, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25Q40.W, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25Q80.W, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25Q16.W, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25Q32.W, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25Q64.W, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25X10, 128 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25X20, 256 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25X40, 512 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25X80, 1024 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25X16, 2048 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25X32, 4096 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond W25X64, 8192 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Unknown SFDP-capable chip, 0 kB: Error: SCIP never cleared! Running OPCODE 0x5a failed at address 0x000000 (payload length was 3). Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 4). Probing for Atmel unknown Atmel SPI chip, 0 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Eon unknown Eon SPI chip, 0 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Macronix unknown Macronix SPI chip, 0 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for PMC unknown PMC SPI chip, 0 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for SST unknown SST SPI chip, 0 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for ST unknown ST SPI chip, 0 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Sanyo unknown Sanyo SPI chip, 0 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Generic unknown SPI chip (RDID), 0 kB: Error: SCIP never cleared! Running OPCODE 0x9f failed (payload length was 3). Probing for Generic unknown SPI chip (REMS), 0 kB: Error: SCIP never cleared! Running OPCODE 0x90 failed at address 0x000000 (payload length was 2). Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x0e, id2 0xc7, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH00B4, 512 kB: probe_82802ab: id1 0xe6, id2 0xee, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH004, 512 kB: probe_82802ab: id1 0xe6, id2 0xee, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xe6, id2 0xee, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5a Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5a Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5a Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xbf, id2 0x5a Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5a Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xe6, id2 0xee, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xbf, id2 0x5a Found SST flash chip "SST49LF008A" (1024 kB, FWH) mapped at physical address 0x00000000fff00000. Lock status for 0x000000 (size 0x010000) is 00, full access Lock status for 0x010000 (size 0x010000) is 00, full access Lock status for 0x020000 (size 0x010000) is 00, full access Lock status for 0x030000 (size 0x010000) is 00, full access Lock status for 0x040000 (size 0x010000) is 00, full access Lock status for 0x050000 (size 0x010000) is 00, full access Lock status for 0x060000 (size 0x010000) is 00, full access Lock status for 0x070000 (size 0x010000) is 00, full access Lock status for 0x080000 (size 0x010000) is 00, full access Lock status for 0x090000 (size 0x010000) is 00, full access Lock status for 0x0a0000 (size 0x010000) is 00, full access Lock status for 0x0b0000 (size 0x010000) is 00, full access Lock status for 0x0c0000 (size 0x010000) is 00, full access Lock status for 0x0d0000 (size 0x010000) is 00, full access Lock status for 0x0e0000 (size 0x010000) is 00, full access Lock status for 0x0f0000 (size 0x010000) is 00, full access Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xe6, id2 0xee, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xe6, id2 0xee, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x0e, id2 0xc7, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xe6, id2 0xee, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x4e, id2 0x41, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5a Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5a Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xbf, id2 0x5a Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xbf, id2 0x5a Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xbf, id2 0x5a Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xbf, id2 0x5a Found SST flash chip "SST49LF008A" (1024 kB, FWH). Lock status for 0x000000 (size 0x010000) is 00, full access Lock status for 0x010000 (size 0x010000) is 00, full access Lock status for 0x020000 (size 0x010000) is 00, full access Lock status for 0x030000 (size 0x010000) is 00, full access Lock status for 0x040000 (size 0x010000) is 00, full access Lock status for 0x050000 (size 0x010000) is 00, full access Lock status for 0x060000 (size 0x010000) is 00, full access Lock status for 0x070000 (size 0x010000) is 00, full access Lock status for 0x080000 (size 0x010000) is 00, full access Lock status for 0x090000 (size 0x010000) is 00, full access Lock status for 0x0a0000 (size 0x010000) is 00, full access Lock status for 0x0b0000 (size 0x010000) is 00, full access Lock status for 0x0c0000 (size 0x010000) is 00, full access Lock status for 0x0d0000 (size 0x010000) is 00, full access Lock status for 0x0e0000 (size 0x010000) is 00, full access Lock status for 0x0f0000 (size 0x010000) is 00, full access Reading flash... done. Restoring MMIO space at 0x7fd2ea727070 Restoring MMIO space at 0x7fd2ea72707c Restoring MMIO space at 0x7fd2ea727078 Restoring MMIO space at 0x7fd2ea727076 Restoring MMIO space at 0x7fd2ea727074 root@foo:/tmp/flashrom# exit exit
Script done on Tue 26 May 2015 02:42:01 PM PDT ========================================================================
-
Matt Taggart