Author: hailfinger Date: Thu Nov 25 00:37:22 2010 New Revision: 1236 URL: http://flashrom.org/trac/flashrom/changeset/1236
Log: Dump all VIA SPI registers like for ICH7. Handle BBAR on VIA. Handle SPI lockdown on VIA.
Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net Acked-by: Rudolf Marek r.marek@assembler.cz
Modified: trunk/ichspi.c
Modified: trunk/ichspi.c ============================================================================== --- trunk/ichspi.c Tue Nov 23 22:28:16 2010 (r1235) +++ trunk/ichspi.c Thu Nov 25 00:37:22 2010 (r1236) @@ -407,24 +407,36 @@ */ void ich_set_bbar(uint32_t minaddr) { +#define BBAR_MASK 0x00ffff00 + minaddr &= BBAR_MASK; switch (spi_controller) { case SPI_CONTROLLER_ICH7: - mmio_writel(minaddr, ich_spibar + 0x50); + case SPI_CONTROLLER_VIA: + ichspi_bbar = mmio_readl(ich_spibar + 0x50) & ~BBAR_MASK; + if (ichspi_bbar) + msg_pdbg("Reserved bits in BBAR not zero: 0x%04x", + ichspi_bbar); + ichspi_bbar |= minaddr; + mmio_writel(ichspi_bbar, ich_spibar + 0x50); ichspi_bbar = mmio_readl(ich_spibar + 0x50); /* We don't have any option except complaining. */ if (ichspi_bbar != minaddr) msg_perr("Setting BBAR failed!\n"); break; case SPI_CONTROLLER_ICH9: - mmio_writel(minaddr, ich_spibar + 0xA0); + ichspi_bbar = mmio_readl(ich_spibar + 0xA0) & ~BBAR_MASK; + if (ichspi_bbar) + msg_pdbg("Reserved bits in BBAR not zero: 0x%04x", + ichspi_bbar); + ichspi_bbar |= minaddr; + mmio_writel(ichspi_bbar, ich_spibar + 0xA0); ichspi_bbar = mmio_readl(ich_spibar + 0xA0); /* We don't have any option except complaining. */ if (ichspi_bbar != minaddr) msg_perr("Setting BBAR failed!\n"); break; default: - /* Not sure if BBAR actually exists on VIA. */ - msg_pdbg("Setting BBAR is not implemented for VIA yet.\n"); + msg_perr("Unknown chipset for BBAR setting!\n"); break; } } @@ -833,6 +845,7 @@ (writearr[2] << 8) | (writearr[3] << 0); switch (spi_controller) { case SPI_CONTROLLER_ICH7: + case SPI_CONTROLLER_VIA: case SPI_CONTROLLER_ICH9: if (addr < ichspi_bbar) { msg_perr("%s: Address 0x%06x below allowed " @@ -1116,17 +1129,46 @@ int via_init_spi(struct pci_dev *dev) { uint32_t mmio_base; + int i;
mmio_base = (pci_read_long(dev, 0xbc)) << 8; msg_pdbg("MMIO base at = 0x%x\n", mmio_base); ich_spibar = physmap("VT8237S MMIO registers", mmio_base, 0x70);
- msg_pdbg("0x6c: 0x%04x (CLOCK/DEBUG)\n", - mmio_readw(ich_spibar + 0x6c)); - /* Not sure if it speaks all these bus protocols. */ buses_supported = CHIP_BUSTYPE_LPC | CHIP_BUSTYPE_FWH | CHIP_BUSTYPE_SPI; spi_controller = SPI_CONTROLLER_VIA; + + msg_pdbg("0x00: 0x%04x (SPIS)\n", mmio_readw(ich_spibar + 0)); + msg_pdbg("0x02: 0x%04x (SPIC)\n", mmio_readw(ich_spibar + 2)); + msg_pdbg("0x04: 0x%08x (SPIA)\n", mmio_readl(ich_spibar + 4)); + for (i = 0; i < 2; i++) { + int offs; + offs = 8 + (i * 8); + msg_pdbg("0x%02x: 0x%08x (SPID%d)\n", offs, + mmio_readl(ich_spibar + offs), i); + msg_pdbg("0x%02x: 0x%08x (SPID%d+4)\n", offs + 4, + mmio_readl(ich_spibar + offs + 4), i); + } + ichspi_bbar = mmio_readl(ich_spibar + 0x50); + msg_pdbg("0x50: 0x%08x (BBAR)\n", ichspi_bbar); + msg_pdbg("0x54: 0x%04x (PREOP)\n", mmio_readw(ich_spibar + 0x54)); + msg_pdbg("0x56: 0x%04x (OPTYPE)\n", mmio_readw(ich_spibar + 0x56)); + msg_pdbg("0x58: 0x%08x (OPMENU)\n", mmio_readl(ich_spibar + 0x58)); + msg_pdbg("0x5c: 0x%08x (OPMENU+4)\n", mmio_readl(ich_spibar + 0x5c)); + for (i = 0; i < 3; i++) { + int offs; + offs = 0x60 + (i * 4); + msg_pdbg("0x%02x: 0x%08x (PBR%d)\n", offs, + mmio_readl(ich_spibar + offs), i); + } + msg_pdbg("0x6c: 0x%04x (CLOCK/DEBUG)\n", + mmio_readw(ich_spibar + 0x6c)); + if (mmio_readw(ich_spibar) & (1 << 15)) { + msg_pinfo("WARNING: SPI Configuration Lockdown activated.\n"); + ichspi_lock = 1; + } + ich_init_opcodes();
return 0;