tested flash chip EN25QH32 using linux_spi programmer on Himmingboard

[Josua Mayer]

Hi there,

just letting you know that I was able to read, write and erase the above 
mentioned flash chip without any issues.
Hardware used: HummingBoard (Freescale i.MX6Q, 4x1GHz armv7l). Chip was 
attached to the SPI port, and 1 gpio was configured and wired as ChipSelect.

Find the logfiles I made attached.

tested flash chip EN25QH32 using linux_spi programmer on Himmingboard

[Stefan Tauner]

On Mon, 28 Dec 2015 17:58:20 +0100
Josua Mayer  wrote:
> Hi there,
>
> just letting you know that I was able to read, write and erase the above 
> mentioned flash chip without any issues.
> Hardware used: HummingBoard (Freescale i.MX6Q, 4x1GHz armv7l). Chip was 
> attached to the SPI port, and 1 gpio was configured and wired as ChipSelect.
>
> Find the logfiles I made attached.

Hello Josua,

thanks for your report!
I have marked the flash chip as fully tested and will commit that later
together with other small changes.
We currently have no means to note the supported devices by the
linux_spi module but I'll add a comment in the code as well.