please always use the equivalent to a "reply all" button so that the mail ends up in the mailing list in the future. thanks for the logs.
Begin forwarded message:
Date: Wed, 5 Sep 2012 15:30:28 +1000 From: Mark Starikov mr.mark.starikov@gmail.com To: stefan.tauner@student.tuwien.ac.at Subject: Re: [flashrom] flashing 0806 bios for P5WD2 PREMIUM
Thank you for the prompt reply Stefan,
please find output of lspci and superiotool attached.
I recon I'll give the "board-enable" from the wiki a go - never had a chance to descend into the DRAM land, this might be it.
Besides it might help me with my VT-d experiments too :).
If you find anything in the files provided - that'd be great, but thanks for your help anyway!
Cheers,
Mark.
On Wed, Sep 5, 2012 at 2:31 PM, Stefan Tauner < stefan.tauner@student.tuwien.ac.at> wrote:
On Wed, 5 Sep 2012 13:44:53 +1000 Mark Starikov mr.mark.starikov@gmail.com wrote:
Please let me know if there is a quick fix that can get this board
flashed
or(as this is very old hardware now) i would understand that support for such would be limited.
Hello Mark,
your board needs a board enable: http://flashrom.org/Board_Enable Usually someone disassembles the BIOS to find the necessary procedure, you can also try what is mentioned in the wiki. Since reverse engineering this stuff has become boring for those that are able to do it, dont expect it to be done by someone else soon-ish (sometimes wonders happen though, the mighty assembler gods are unfathomable :)
In any case please provide the output of lspci -nnvvvxxx run as root and if possible also superiotool -deV, thanks. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner
-
Stefan Tauner