This version really compiles. Forgot the forward declaration after moving code initially.
Signed-off-by: Michael Karcher flashrom@mkarcher.dialup.fu-berlin.de --- buspirate_spi.c | 18 +++++++-- dediprog.c | 15 ++++++- dummyflasher.c | 18 +++++++-- flash.h | 49 ++--------------------- flashrom.c | 4 -- ft2232_spi.c | 11 +++++- ichspi.c | 59 ++++++++++++++++++++-------- it87spi.c | 18 +++++++-- sb600spi.c | 17 ++++++-- spi.c | 115 +++++-------------------------------------------------- spi25.c | 4 +- wbsio_spi.c | 16 ++++++- 12 files changed, 149 insertions(+), 195 deletions(-)
diff --git a/buspirate_spi.c b/buspirate_spi.c index 55e71c2..36eaa9a 100644 --- a/buspirate_spi.c +++ b/buspirate_spi.c @@ -44,6 +44,8 @@ static int buspirate_serialport_setup(char *dev) #define sp_flush_incoming(...) 0 #endif
+static const struct spi_programmer spi_programmer_buspirate; + static int buspirate_sendrecv(unsigned char *buf, unsigned int writecnt, unsigned int readcnt) { int i, ret = 0; @@ -210,7 +212,7 @@ int buspirate_spi_init(void) }
buses_supported = CHIP_BUSTYPE_SPI; - spi_controller = SPI_CONTROLLER_BUSPIRATE; + spi_programmer = &spi_programmer_buspirate;
return 0; } @@ -250,7 +252,7 @@ int buspirate_spi_shutdown(void) return 0; }
-int buspirate_spi_send_command(unsigned int writecnt, unsigned int readcnt, +static int buspirate_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr) { static unsigned char *buf = NULL; @@ -304,12 +306,20 @@ int buspirate_spi_send_command(unsigned int writecnt, unsigned int readcnt, return ret; }
-int buspirate_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len) +static int buspirate_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len) { return spi_read_chunked(flash, buf, start, len, 12); }
-int buspirate_spi_write_256(struct flashchip *flash, uint8_t *buf, int start, int len) +static int buspirate_spi_write_256(struct flashchip *flash, uint8_t *buf, int start, int len) { return spi_write_chunked(flash, buf, start, len, 12); } + +static const struct spi_programmer spi_programmer_buspirate = { + .type = SPI_CONTROLLER_BUSPIRATE, + .command = buspirate_spi_send_command, + .multicommand = default_spi_send_multicommand, + .read = buspirate_spi_read, + .write_256 = buspirate_spi_write_256, +}; diff --git a/dediprog.c b/dediprog.c index 0b92983..c21c801 100644 --- a/dediprog.c +++ b/dediprog.c @@ -25,6 +25,7 @@
#define DEFAULT_TIMEOUT 3000 static usb_dev_handle *dediprog_handle; +static const struct spi_programmer spi_programmer_dediprog;
#if 0 /* Might be useful for other pieces of code as well. */ @@ -145,14 +146,14 @@ static int dediprog_set_spi_speed(uint16_t speed) } #endif
-int dediprog_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len) +static int dediprog_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len) { msg_pspew("%s, start=0x%x, len=0x%x\n", __func__, start, len); /* Chosen read length is 16 bytes for now. */ return spi_read_chunked(flash, buf, start, len, 16); }
-int dediprog_spi_send_command(unsigned int writecnt, unsigned int readcnt, +static int dediprog_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr) { int ret; @@ -318,7 +319,7 @@ int dediprog_init(void) return 1;
buses_supported = CHIP_BUSTYPE_SPI; - spi_controller = SPI_CONTROLLER_DEDIPROG; + spi_programmer = &spi_programmer_dediprog;
/* RE leftover, leave in until the driver is complete. */ #if 0 @@ -394,3 +395,11 @@ int dediprog_shutdown(void) } return 0; } + +static const struct spi_programmer spi_programmer_dediprog = { + .type = SPI_CONTROLLER_DEDIPROG, + .command = dediprog_spi_send_command, + .multicommand = default_spi_send_multicommand, + .read = dediprog_spi_read, + .write_256 = spi_chip_write_1_new, +}; diff --git a/dummyflasher.c b/dummyflasher.c index 241dcee..b1bbcf2 100644 --- a/dummyflasher.c +++ b/dummyflasher.c @@ -25,6 +25,8 @@ #include "flash.h" #include "chipdrivers.h"
+static const struct spi_programmer spi_programmer_dummy; + static void tolower_string(char *str) { for (; *str != '\0'; str++) @@ -59,7 +61,7 @@ int dummy_init(void) } if (strstr(bustext, "spi")) { buses_supported |= CHIP_BUSTYPE_SPI; - spi_controller = SPI_CONTROLLER_DUMMY; + spi_programmer = &spi_programmer_dummy; msg_pdbg("Enabling support for %s flash.\n", "SPI"); } if (buses_supported == CHIP_BUSTYPE_NONE) @@ -140,7 +142,7 @@ void dummy_chip_readn(uint8_t *buf, const chipaddr addr, size_t len) return; }
-int dummy_spi_send_command(unsigned int writecnt, unsigned int readcnt, +static int dummy_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr) { int i; @@ -161,7 +163,7 @@ int dummy_spi_send_command(unsigned int writecnt, unsigned int readcnt, return 0; }
-int dummy_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len) +static int dummy_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len) { /* Maximum read length is unlimited, use 64kB. */ return spi_read_chunked(flash, buf, start, len, 64 * 1024); @@ -171,7 +173,15 @@ int dummy_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len) * never be successful, and the current frontend refuses to write in that case. * Other frontends may allow writing even for non-detected chips, though. */ -int dummy_spi_write_256(struct flashchip *flash, uint8_t *buf, int start, int len) +static int dummy_spi_write_256(struct flashchip *flash, uint8_t *buf, int start, int len) { return spi_write_chunked(flash, buf, start, len, 256); } + +static const struct spi_programmer spi_programmer_dummy = { + .type = SPI_CONTROLLER_DUMMY, + .command = dummy_spi_send_command, + .multicommand = default_spi_send_multicommand, + .read = dummy_spi_read, + .write_256 = dummy_spi_write_256, +}; diff --git a/flash.h b/flash.h index 8ebea29..fb06207 100644 --- a/flash.h +++ b/flash.h @@ -452,10 +452,6 @@ uint8_t dummy_chip_readb(const chipaddr addr); uint16_t dummy_chip_readw(const chipaddr addr); uint32_t dummy_chip_readl(const chipaddr addr); void dummy_chip_readn(uint8_t *buf, const chipaddr addr, size_t len); -int dummy_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr); -int dummy_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len); -int dummy_spi_write_256(struct flashchip *flash, uint8_t *buf, int start, int len); #endif
/* nic3com.c */ @@ -527,9 +523,6 @@ extern const struct pcidev_status ata_hpt[]; #define FTDI_FT2232H 0x6010 #define FTDI_FT4232H 0x6011 int ft2232_spi_init(void); -int ft2232_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); -int ft2232_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len); -int ft2232_spi_write_256(struct flashchip *flash, uint8_t *buf, int start, int len);
/* bitbang_spi.c */ int bitbang_spi_init(const struct bitbang_spi_master *master, int halfperiod); @@ -544,15 +537,10 @@ struct buspirate_spispeeds { }; int buspirate_spi_init(void); int buspirate_spi_shutdown(void); -int buspirate_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); -int buspirate_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len); -int buspirate_spi_write_256(struct flashchip *flash, uint8_t *buf, int start, int len);
/* dediprog.c */ int dediprog_init(void); int dediprog_shutdown(void); -int dediprog_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); -int dediprog_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len);
/* flashrom.c */ enum write_granularity { @@ -627,32 +615,18 @@ int handle_romentries(uint8_t *buffer, struct flashchip *flash);
/* spi.c */ enum spi_controller { - SPI_CONTROLLER_NONE, -#if CONFIG_INTERNAL == 1 -#if defined(__i386__) || defined(__x86_64__) SPI_CONTROLLER_ICH7, SPI_CONTROLLER_ICH9, SPI_CONTROLLER_IT87XX, SPI_CONTROLLER_SB600, SPI_CONTROLLER_VIA, SPI_CONTROLLER_WBSIO, -#endif -#endif -#if CONFIG_FT2232_SPI == 1 SPI_CONTROLLER_FT2232, -#endif -#if CONFIG_DUMMY == 1 SPI_CONTROLLER_DUMMY, -#endif -#if CONFIG_BUSPIRATE_SPI == 1 SPI_CONTROLLER_BUSPIRATE, -#endif -#if CONFIG_DEDIPROG == 1 SPI_CONTROLLER_DEDIPROG, -#endif - SPI_CONTROLLER_INVALID /* This must always be the last entry. */ }; -extern const int spi_programmer_count; + struct spi_command { unsigned int writecnt; unsigned int readcnt; @@ -660,6 +634,7 @@ struct spi_command { unsigned char *readarr; }; struct spi_programmer { + enum spi_controller type; int (*command)(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); int (*multicommand)(struct spi_command *cmds); @@ -669,8 +644,8 @@ struct spi_programmer { int (*write_256)(struct flashchip *flash, uint8_t *buf, int start, int len); };
-extern enum spi_controller spi_controller; -extern const struct spi_programmer spi_programmer[]; +const struct spi_programmer *spi_programmer; + int spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); int spi_send_multicommand(struct spi_command *cmds); @@ -684,11 +659,6 @@ extern uint32_t ichspi_bbar; void ich_init_spi(struct pci_dev *dev, uint32_t base, void * rcrb, int ich_generation); int via_init_spi(struct pci_dev * dev); -int ich_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr); -int ich_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len); -int ich_spi_write_256(struct flashchip *flash, uint8_t * buf, int start, int len); -int ich_spi_send_multicommand(struct spi_command *cmds);
/* it87spi.c */ void enter_conf_mode_ite(uint16_t port); @@ -696,23 +666,12 @@ void exit_conf_mode_ite(uint16_t port); struct superio probe_superio_ite(void); int init_superio_ite(void); int it87spi_init(void); -int it8716f_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr); -int it8716f_spi_chip_read(struct flashchip *flash, uint8_t *buf, int start, int len); -int it8716f_spi_chip_write_256(struct flashchip *flash, uint8_t *buf, int start, int len);
/* sb600spi.c */ void sb600_probe_spi(struct pci_dev * dev); -int sb600_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr); -int sb600_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len); -int sb600_spi_write_256(struct flashchip *flash, uint8_t *buf, int start, int len);
/* wbsio_spi.c */ int wbsio_check_for_spi(void); -int wbsio_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr); -int wbsio_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len);
/* serprog.c */ int serprog_init(void); diff --git a/flashrom.c b/flashrom.c index fe173a7..dc262d5 100644 --- a/flashrom.c +++ b/flashrom.c @@ -1354,10 +1354,6 @@ int selfcheck(void) msg_gerr("Programmer table miscompilation!\n"); ret = 1; } - if (spi_programmer_count - 1 != SPI_CONTROLLER_INVALID) { - msg_gerr("SPI programmer table miscompilation!\n"); - ret = 1; - } for (flash = flashchips; flash && flash->name; flash++) if (selfcheck_eraseblocks(flash)) ret = 1; diff --git a/ft2232_spi.c b/ft2232_spi.c index c8711e9..b45ba42 100644 --- a/ft2232_spi.c +++ b/ft2232_spi.c @@ -45,6 +45,7 @@ #define BITMODE_BITBANG_NORMAL 1 #define BITMODE_BITBANG_SPI 2
+static const struct spi_programmer spi_programmer_ft2232; static struct ftdi_context ftdic_context;
static int send_buf(struct ftdi_context *ftdic, const unsigned char *buf, int size) @@ -192,7 +193,7 @@ int ft2232_spi_init(void) // msg_pdbg("\nft2232 chosen\n");
buses_supported = CHIP_BUSTYPE_SPI; - spi_controller = SPI_CONTROLLER_FT2232; + spi_programmer = &spi_programmer_ft2232;
return 0; } @@ -293,4 +294,12 @@ int ft2232_spi_write_256(struct flashchip *flash, uint8_t *buf, int start, int l return spi_write_chunked(flash, buf, start, len, 256); }
+static const struct spi_programmer spi_programmer_ft2232 = { + .type = SPI_CONTROLLER_FT2232, + .command = ft2232_spi_send_command, + .multicommand = default_spi_send_multicommand, + .read = ft2232_spi_read, + .write_256 = ft2232_spi_write_256, +}; + #endif diff --git a/ichspi.c b/ichspi.c index 246f3ae..ae9a5f4 100644 --- a/ichspi.c +++ b/ichspi.c @@ -106,6 +106,9 @@ static int ichspi_lock = 0; uint32_t ichspi_bbar = 0;
static void *ich_spibar = NULL; +static const struct spi_programmer spi_programmer_ich7; +static const struct spi_programmer spi_programmer_ich9; +static const struct spi_programmer spi_programmer_via;
typedef struct _OPCODE { uint8_t opcode; //This commands spi opcode @@ -234,7 +237,7 @@ static int generate_opcodes(OPCODES * op) return -1; }
- switch (spi_controller) { + switch (spi_programmer->type) { case SPI_CONTROLLER_ICH7: case SPI_CONTROLLER_VIA: preop = REGREAD16(ICH7_REG_PREOP); @@ -309,7 +312,7 @@ int program_opcodes(OPCODES * op) }
msg_pdbg("\n%s: preop=%04x optype=%04x opmenu=%08x%08x\n", __func__, preop, optype, opmenu[0], opmenu[1]); - switch (spi_controller) { + switch (spi_programmer->type) { case SPI_CONTROLLER_ICH7: case SPI_CONTROLLER_VIA: REGWRITE16(ICH7_REG_PREOP, preop); @@ -337,7 +340,7 @@ int program_opcodes(OPCODES * op) */ void ich_set_bbar(uint32_t minaddr) { - switch (spi_controller) { + switch (spi_programmer->type) { case SPI_CONTROLLER_ICH7: mmio_writel(minaddr, ich_spibar + 0x50); ichspi_bbar = mmio_readl(ich_spibar + 0x50); @@ -448,19 +451,19 @@ void ich_init_spi(struct pci_dev *dev, uint32_t base, void * rcrb, switch (ich_generation) { case 7: buses_supported = CHIP_BUSTYPE_SPI; - spi_controller = SPI_CONTROLLER_ICH7; + spi_programmer = &spi_programmer_ich7; spibar_offset = 0x3020; break; case 8: buses_supported = CHIP_BUSTYPE_FWH | CHIP_BUSTYPE_SPI; - spi_controller = SPI_CONTROLLER_ICH9; + spi_programmer = &spi_programmer_ich9; spibar_offset = 0x3020; break; case 9: case 10: default: /* Future version might behave the same */ buses_supported = CHIP_BUSTYPE_FWH | CHIP_BUSTYPE_SPI; - spi_controller = SPI_CONTROLLER_ICH9; + spi_programmer = &spi_programmer_ich9; spibar_offset = 0x3800; break; } @@ -471,7 +474,7 @@ void ich_init_spi(struct pci_dev *dev, uint32_t base, void * rcrb, /* Assign Virtual Address */ ich_spibar = rcrb + spibar_offset;
- switch (spi_controller) { + switch (spi_programmer->type) { case SPI_CONTROLLER_ICH7: msg_pdbg("0x00: 0x%04x (SPIS)\n", mmio_readw(ich_spibar + 0)); @@ -600,7 +603,7 @@ int via_init_spi(struct pci_dev * dev)
/* Not sure if it speaks all these bus protocols. */ buses_supported = CHIP_BUSTYPE_LPC | CHIP_BUSTYPE_FWH | CHIP_BUSTYPE_SPI; - spi_controller = SPI_CONTROLLER_VIA; + spi_programmer = &spi_programmer_via; ich_init_opcodes();
return 0; @@ -848,7 +851,7 @@ static int ich9_run_opcode(OPCODE op, uint32_t offset, static int run_opcode(OPCODE op, uint32_t offset, uint8_t datalength, uint8_t * data) { - switch (spi_controller) { + switch (spi_programmer->type) { case SPI_CONTROLLER_VIA: if (datalength > 16) { msg_perr("%s: Internal command size error for " @@ -881,27 +884,27 @@ static int run_opcode(OPCODE op, uint32_t offset, return -1; }
-int ich_spi_read(struct flashchip *flash, uint8_t * buf, int start, int len) +static int ich_spi_read(struct flashchip *flash, uint8_t * buf, int start, int len) { int maxdata = 64;
- if (spi_controller == SPI_CONTROLLER_VIA) + if (spi_programmer->type == SPI_CONTROLLER_VIA) maxdata = 16;
return spi_read_chunked(flash, buf, start, len, maxdata); }
-int ich_spi_write_256(struct flashchip *flash, uint8_t * buf, int start, int len) +static int ich_spi_write_256(struct flashchip *flash, uint8_t * buf, int start, int len) { int maxdata = 64;
- if (spi_controller == SPI_CONTROLLER_VIA) + if (spi_programmer->type == SPI_CONTROLLER_VIA) maxdata = 16;
return spi_write_chunked(flash, buf, start, len, maxdata); }
-int ich_spi_send_command(unsigned int writecnt, unsigned int readcnt, +static int ich_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr) { int result; @@ -966,7 +969,7 @@ int ich_spi_send_command(unsigned int writecnt, unsigned int readcnt, opcode->spi_type == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS) { addr = (writearr[1] << 16) | (writearr[2] << 8) | (writearr[3] << 0); - switch (spi_controller) { + switch (spi_programmer->type) { case SPI_CONTROLLER_ICH7: case SPI_CONTROLLER_ICH9: if (addr < ichspi_bbar) { @@ -1001,7 +1004,7 @@ int ich_spi_send_command(unsigned int writecnt, unsigned int readcnt, return result; }
-int ich_spi_send_multicommand(struct spi_command *cmds) +static int ich_spi_send_multicommand(struct spi_command *cmds) { int ret = 0; int i; @@ -1071,4 +1074,28 @@ int ich_spi_send_multicommand(struct spi_command *cmds) return ret; }
+static const struct spi_programmer spi_programmer_ich7 = { + .type = SPI_CONTROLLER_ICH7, + .command = ich_spi_send_command, + .multicommand = ich_spi_send_multicommand, + .read = ich_spi_read, + .write_256 = ich_spi_write_256, +}; + +static const struct spi_programmer spi_programmer_ich9 = { + .type = SPI_CONTROLLER_ICH9, + .command = ich_spi_send_command, + .multicommand = ich_spi_send_multicommand, + .read = ich_spi_read, + .write_256 = ich_spi_write_256, +}; + +static const struct spi_programmer spi_programmer_via = { + .type = SPI_CONTROLLER_VIA, + .command = ich_spi_send_command, + .multicommand = ich_spi_send_multicommand, + .read = ich_spi_read, + .write_256 = ich_spi_write_256, +}; + #endif diff --git a/it87spi.c b/it87spi.c index cf3d3b9..dddb5a9 100644 --- a/it87spi.c +++ b/it87spi.c @@ -34,6 +34,8 @@ #define ITE_SUPERIO_PORT1 0x2e #define ITE_SUPERIO_PORT2 0x4e
+static const struct spi_programmer spi_programmer_it87xx; + uint16_t it8716f_flashport = 0; /* use fast 33MHz SPI (<>0) or slow 16MHz (0) */ static int fast_spi = 1; @@ -175,7 +177,7 @@ static uint16_t it87spi_probe(uint16_t port) it8716f_flashport = flashport; if (buses_supported & CHIP_BUSTYPE_SPI) msg_pdbg("Overriding chipset SPI with IT87 SPI.\n"); - spi_controller = SPI_CONTROLLER_IT87XX; + spi_programmer = &spi_programmer_it87xx; buses_supported |= CHIP_BUSTYPE_SPI; return 0; } @@ -227,7 +229,7 @@ int it87spi_init(void) * commands with the address in inverse wire order. That's why the register * ordering in case 4 and 5 may seem strange. */ -int it8716f_spi_send_command(unsigned int writecnt, unsigned int readcnt, +static int it8716f_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr) { uint8_t busy, writeenc; @@ -320,7 +322,7 @@ static int it8716f_spi_page_program(struct flashchip *flash, uint8_t *buf, int s * IT8716F only allows maximum of 512 kb SPI mapped to LPC memory cycles * Need to read this big flash using firmware cycles 3 byte at a time. */ -int it8716f_spi_chip_read(struct flashchip *flash, uint8_t *buf, int start, int len) +static int it8716f_spi_chip_read(struct flashchip *flash, uint8_t *buf, int start, int len) { int total_size = 1024 * flash->total_size; fast_spi = 0; @@ -334,7 +336,7 @@ int it8716f_spi_chip_read(struct flashchip *flash, uint8_t *buf, int start, int return 0; }
-int it8716f_spi_chip_write_256(struct flashchip *flash, uint8_t *buf, int start, int len) +static int it8716f_spi_chip_write_256(struct flashchip *flash, uint8_t *buf, int start, int len) { /* * IT8716F only allows maximum of 512 kb SPI chip size for memory @@ -371,4 +373,12 @@ int it8716f_spi_chip_write_256(struct flashchip *flash, uint8_t *buf, int start, return 0; }
+static const struct spi_programmer spi_programmer_it87xx = { + .type = SPI_CONTROLLER_IT87XX, + .command = it8716f_spi_send_command, + .multicommand = default_spi_send_multicommand, + .read = it8716f_spi_chip_read, + .write_256 = it8716f_spi_chip_write_256, +}; + #endif diff --git a/sb600spi.c b/sb600spi.c index e42b20b..866e309 100644 --- a/sb600spi.c +++ b/sb600spi.c @@ -41,6 +41,7 @@ */
static uint8_t *sb600_spibar = NULL; +static const struct spi_programmer spi_programmer_sb600;
void sb600_probe_spi(struct pci_dev * dev) { @@ -114,16 +115,16 @@ void sb600_probe_spi(struct pci_dev * dev) return;
buses_supported |= CHIP_BUSTYPE_SPI; - spi_controller = SPI_CONTROLLER_SB600; + spi_programmer = &spi_programmer_sb600; }
-int sb600_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len) +static int sb600_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len) { /* Maximum read length is 8 bytes. */ return spi_read_chunked(flash, buf, start, len, 8); }
-int sb600_spi_write_256(struct flashchip *flash, uint8_t *buf, int start, int len) +static int sb600_spi_write_256(struct flashchip *flash, uint8_t *buf, int start, int len) { return spi_write_chunked(flash, buf, start, len, 5); } @@ -144,7 +145,7 @@ static void execute_command(void) ; }
-int sb600_spi_send_command(unsigned int writecnt, unsigned int readcnt, +static int sb600_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr) { int count; @@ -227,4 +228,12 @@ int sb600_spi_send_command(unsigned int writecnt, unsigned int readcnt, return 0; }
+static const struct spi_programmer spi_programmer_sb600 = { + .type = SPI_CONTROLLER_SB600, + .command = sb600_spi_send_command, + .multicommand = default_spi_send_multicommand, + .read = sb600_spi_read, + .write_256 = sb600_spi_write_256, +}; + #endif diff --git a/spi.c b/spi.c index 2b64463..dc4da9f 100644 --- a/spi.c +++ b/spi.c @@ -27,129 +27,34 @@ #include "chipdrivers.h" #include "spi.h"
-enum spi_controller spi_controller = SPI_CONTROLLER_NONE; - void spi_prettyprint_status_register(struct flashchip *flash);
-const struct spi_programmer spi_programmer[] = { - { /* SPI_CONTROLLER_NONE */ - .command = NULL, - .multicommand = NULL, - .read = NULL, - .write_256 = NULL, - }, - -#if CONFIG_INTERNAL == 1 -#if defined(__i386__) || defined(__x86_64__) - { /* SPI_CONTROLLER_ICH7 */ - .command = ich_spi_send_command, - .multicommand = ich_spi_send_multicommand, - .read = ich_spi_read, - .write_256 = ich_spi_write_256, - }, - - { /* SPI_CONTROLLER_ICH9 */ - .command = ich_spi_send_command, - .multicommand = ich_spi_send_multicommand, - .read = ich_spi_read, - .write_256 = ich_spi_write_256, - }, - - { /* SPI_CONTROLLER_IT87XX */ - .command = it8716f_spi_send_command, - .multicommand = default_spi_send_multicommand, - .read = it8716f_spi_chip_read, - .write_256 = it8716f_spi_chip_write_256, - }, - - { /* SPI_CONTROLLER_SB600 */ - .command = sb600_spi_send_command, - .multicommand = default_spi_send_multicommand, - .read = sb600_spi_read, - .write_256 = sb600_spi_write_256, - }, - - { /* SPI_CONTROLLER_VIA */ - .command = ich_spi_send_command, - .multicommand = ich_spi_send_multicommand, - .read = ich_spi_read, - .write_256 = ich_spi_write_256, - }, - - { /* SPI_CONTROLLER_WBSIO */ - .command = wbsio_spi_send_command, - .multicommand = default_spi_send_multicommand, - .read = wbsio_spi_read, - .write_256 = spi_chip_write_1_new, - }, -#endif -#endif - -#if CONFIG_FT2232_SPI == 1 - { /* SPI_CONTROLLER_FT2232 */ - .command = ft2232_spi_send_command, - .multicommand = default_spi_send_multicommand, - .read = ft2232_spi_read, - .write_256 = ft2232_spi_write_256, - }, -#endif - -#if CONFIG_DUMMY == 1 - { /* SPI_CONTROLLER_DUMMY */ - .command = dummy_spi_send_command, - .multicommand = default_spi_send_multicommand, - .read = dummy_spi_read, - .write_256 = dummy_spi_write_256, - }, -#endif - -#if CONFIG_BUSPIRATE_SPI == 1 - { /* SPI_CONTROLLER_BUSPIRATE */ - .command = buspirate_spi_send_command, - .multicommand = default_spi_send_multicommand, - .read = buspirate_spi_read, - .write_256 = buspirate_spi_write_256, - }, -#endif - -#if CONFIG_DEDIPROG == 1 - { /* SPI_CONTROLLER_DEDIPROG */ - .command = dediprog_spi_send_command, - .multicommand = default_spi_send_multicommand, - .read = dediprog_spi_read, - .write_256 = spi_chip_write_1_new, - }, -#endif - - {}, /* This entry corresponds to SPI_CONTROLLER_INVALID. */ -}; - -const int spi_programmer_count = ARRAY_SIZE(spi_programmer); +const struct spi_programmer *spi_programmer;
int spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr) { - if (!spi_programmer[spi_controller].command) { + if (!spi_programmer->command) { msg_perr("%s called, but SPI is unsupported on this " "hardware. Please report a bug at " "flashrom@flashrom.org\n", __func__); return 1; }
- return spi_programmer[spi_controller].command(writecnt, readcnt, + return spi_programmer->command(writecnt, readcnt, writearr, readarr); }
int spi_send_multicommand(struct spi_command *cmds) { - if (!spi_programmer[spi_controller].multicommand) { + if (!spi_programmer->multicommand) { msg_perr("%s called, but SPI is unsupported on this " "hardware. Please report a bug at " "flashrom@flashrom.org\n", __func__); return 1; }
- return spi_programmer[spi_controller].multicommand(cmds); + return spi_programmer->multicommand(cmds); }
int default_spi_send_command(unsigned int writecnt, unsigned int readcnt, @@ -183,14 +88,14 @@ int default_spi_send_multicommand(struct spi_command *cmds)
int spi_chip_read(struct flashchip *flash, uint8_t *buf, int start, int len) { - if (!spi_programmer[spi_controller].read) { + if (!spi_programmer->read) { msg_perr("%s called, but SPI read is unsupported on this " "hardware. Please report a bug at " "flashrom@flashrom.org\n", __func__); return 1; }
- return spi_programmer[spi_controller].read(flash, buf, start, len); + return spi_programmer->read(flash, buf, start, len); }
/* @@ -202,14 +107,14 @@ int spi_chip_read(struct flashchip *flash, uint8_t *buf, int start, int len) /* real chunksize is up to 256, logical chunksize is 256 */ int spi_chip_write_256_new(struct flashchip *flash, uint8_t *buf, int start, int len) { - if (!spi_programmer[spi_controller].write_256) { + if (!spi_programmer->write_256) { msg_perr("%s called, but SPI page write is unsupported on this " "hardware. Please report a bug at " "flashrom@flashrom.org\n", __func__); return 1; }
- return spi_programmer[spi_controller].write_256(flash, buf, start, len); + return spi_programmer->write_256(flash, buf, start, len); }
/* Wrapper function until the generic code is converted to partial writes. */ @@ -239,7 +144,7 @@ int spi_chip_write_256(struct flashchip *flash, uint8_t *buf) */ uint32_t spi_get_valid_read_addr(void) { - switch (spi_controller) { + switch (spi_programmer->type) { #if CONFIG_INTERNAL == 1 #if defined(__i386__) || defined(__x86_64__) case SPI_CONTROLLER_ICH7: diff --git a/spi25.c b/spi25.c index 32bb73c..d9dae35 100644 --- a/spi25.c +++ b/spi25.c @@ -177,7 +177,7 @@ int probe_spi_rdid4(struct flashchip *flash) /* Some SPI controllers do not support commands with writecnt=1 and * readcnt=4. */ - switch (spi_controller) { + switch (spi_programmer->type) { #if CONFIG_INTERNAL == 1 #if defined(__i386__) || defined(__x86_64__) case SPI_CONTROLLER_IT87XX: @@ -1019,7 +1019,7 @@ int spi_aai_write(struct flashchip *flash, uint8_t *buf, int start, int len) .readarr = NULL, }};
- switch (spi_controller) { + switch (spi_programmer->type) { #if CONFIG_INTERNAL == 1 #if defined(__i386__) || defined(__x86_64__) case SPI_CONTROLLER_IT87XX: diff --git a/wbsio_spi.c b/wbsio_spi.c index b8f8b38..6288340 100644 --- a/wbsio_spi.c +++ b/wbsio_spi.c @@ -28,6 +28,7 @@ #define WBSIO_PORT2 0x4e
static uint16_t wbsio_spibase = 0; +static const struct spi_programmer spi_programmer_wbsio;
static uint16_t wbsio_get_spibase(uint16_t port) { @@ -68,7 +69,7 @@ int wbsio_check_for_spi(void) msg_pspew("\nwbsio_spibase = 0x%x\n", wbsio_spibase);
buses_supported |= CHIP_BUSTYPE_SPI; - spi_controller = SPI_CONTROLLER_WBSIO; + spi_programmer = &spi_programmer_wbsio; msg_pdbg("%s: Winbond saved on 4 register bits so max chip size is " "1024 KB!\n", __func__); max_rom_decode.spi = 1024 * 1024; @@ -96,7 +97,7 @@ int wbsio_check_for_spi(void) * Would one more byte of RAM in the chip (to get all 24 bits) really make * such a big difference? */ -int wbsio_spi_send_command(unsigned int writecnt, unsigned int readcnt, +static int wbsio_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr) { int i; @@ -180,9 +181,18 @@ int wbsio_spi_send_command(unsigned int writecnt, unsigned int readcnt, return 0; }
-int wbsio_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len) +static int wbsio_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len) { return read_memmapped(flash, buf, start, len); }
+static const struct spi_programmer spi_programmer_wbsio = { + .type = SPI_CONTROLLER_WBSIO, + .command = wbsio_spi_send_command, + .multicommand = default_spi_send_multicommand, + .read = wbsio_spi_read, + .write_256 = spi_chip_write_1_new, +}; + + #endif
-
Michael Karcher