- rename serprog_delay parameter to usecs - fix code style, (output) formatting issues and comments - sp_docommand: remove unnecessary malloc+memcpy and fix formatting
Signed-off-by: Stefan Tauner stefan.tauner@student.tuwien.ac.at --- programmer.h | 5 ++- serprog-protocol.txt | 2 +- serprog.c | 53 +++++++++++++++++++++++-------------------------- 3 files changed, 29 insertions(+), 31 deletions(-)
diff --git a/programmer.h b/programmer.h index 7df2120..b6700c0 100644 --- a/programmer.h +++ b/programmer.h @@ -601,9 +601,10 @@ int serprog_init(void); void serprog_chip_writeb(uint8_t val, chipaddr addr); uint8_t serprog_chip_readb(const chipaddr addr); void serprog_chip_readn(uint8_t *buf, const chipaddr addr, size_t len); -void serprog_delay(int delay); +void serprog_delay(int usecs); int serprog_spi_send_command(unsigned int writecnt, unsigned int readcnt, - const unsigned char *writearr, unsigned char *readarr); + const unsigned char *writearr, + unsigned char *readarr); int serprog_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len); #endif
diff --git a/serprog-protocol.txt b/serprog-protocol.txt index 2391aef..9a09287 100644 --- a/serprog-protocol.txt +++ b/serprog-protocol.txt @@ -19,7 +19,7 @@ COMMAND Description Parameters Return Value 0x05 Query supported bustypes none ACK + 8-bit flags (as per flashrom) / NAK 0x06 Query connected address lines none ACK + 8bit line count / NAK 0x07 Query operation buffer size none ACK + 16bit size / NAK -0x08 Query write-n maximum data len none ACK + 24bit maximum length / NAK +0x08 Query maximum write-n length none ACK + 24bit length (0==2^24) / NAK 0x09 Read byte 24-bit addr ACK + BYTE / NAK 0x0A Read n bytes 24-bit addr + 24-bit length ACK + length bytes / NAK 0x0B Initialize operation buffer none ACK / NAK diff --git a/serprog.c b/serprog.c index 5f2c014..7585baf 100644 --- a/serprog.c +++ b/serprog.c @@ -204,7 +204,7 @@ static void sp_synchronize(void) return; } } - msg_perr("Error: cannot synchronize protocol\n" + msg_perr("Error: cannot synchronize protocol " "- check communications and reset device?\n"); exit(1); } @@ -220,32 +220,27 @@ static int sp_check_commandavail(uint8_t command) static int sp_automatic_cmdcheck(uint8_t cmd) { if ((sp_check_avail_automatic) && (sp_check_commandavail(cmd) == 0)) { - msg_pdbg("Warning: Automatic command availability check" - " failed for cmd %d - wont execute cmd\n",cmd); + msg_pdbg("Warning: Automatic command availability check failed " + "for cmd 0x%x - wont execute cmd\n", cmd); return 1; } return 0; }
static int sp_docommand(uint8_t command, uint32_t parmlen, - uint8_t * params, uint32_t retlen, void *retparms) + uint8_t *params, uint32_t retlen, void *retparms) { - unsigned char *sendpacket; unsigned char c; if (sp_automatic_cmdcheck(command)) return 1; - sendpacket = malloc(1 + parmlen); - if (!sendpacket) - sp_die("Error: cannot malloc command buffer"); - sendpacket[0] = command; - memcpy(&(sendpacket[1]), params, parmlen); - if (write(sp_fd, sendpacket, 1 + parmlen) != (1 + parmlen)) { - sp_die("Error: cannot write command"); - } - free(sendpacket); + if (write(sp_fd, &command, 1) != 1) + sp_die("Error: cannot write op code"); + if (write(sp_fd, params, parmlen) != (parmlen)) + sp_die("Error: cannot write parameters"); if (read(sp_fd, &c, 1) != 1) sp_die("Error: cannot read from device"); - if (c == S_NAK) return 1; + if (c == S_NAK) + return 1; if (c != S_ACK) { msg_perr("Error: invalid response 0x%02X from device\n",c); exit(1); @@ -256,8 +251,8 @@ static int sp_docommand(uint8_t command, uint32_t parmlen, int r; r = read(sp_fd, retparms + rd_bytes, retlen - rd_bytes); - if (r <= 0) sp_die - ("Error: cannot read return parameters"); + if (r <= 0) + sp_die("Error: cannot read return parameters"); rd_bytes += r; } while (rd_bytes != retlen); } @@ -735,30 +730,32 @@ void serprog_chip_readn(uint8_t * buf, const chipaddr addr, size_t len) { size_t lenm = len; chipaddr addrm = addr; - while ((sp_max_read_n)&&(lenm > sp_max_read_n)) { - sp_do_read_n(&(buf[addrm-addr]),addrm,sp_max_read_n); + while ((sp_max_read_n != 0) && (lenm > sp_max_read_n)) { + sp_do_read_n(&(buf[addrm-addr]), addrm, sp_max_read_n); addrm += sp_max_read_n; lenm -= sp_max_read_n; } - if (lenm) sp_do_read_n(&(buf[addrm-addr]),addrm,lenm); + if (lenm) + sp_do_read_n(&(buf[addrm-addr]), addrm, lenm); }
-void serprog_delay(int delay) +void serprog_delay(int usecs) { unsigned char buf[4]; - msg_pspew("%s\n", __func__); + msg_pspew("%s usecs=%d\n", __func__, usecs); if (!sp_check_commandavail(S_CMD_O_DELAY)) { - internal_delay(delay); - msg_pdbg("Note: serprog_delay used, but the programmer doesnt support delay\n"); + msg_pdbg("Note: using internal_delay, because the attached " + "programmer does not support the delay opcode.\n"); + internal_delay(usecs); return; } if ((sp_max_write_n) && (sp_write_n_bytes)) sp_pass_writen(); sp_check_opbuf_usage(5); - buf[0] = ((delay >> 0) & 0xFF); - buf[1] = ((delay >> 8) & 0xFF); - buf[2] = ((delay >> 16) & 0xFF); - buf[3] = ((delay >> 24) & 0xFF); + buf[0] = ((usecs >> 0) & 0xFF); + buf[1] = ((usecs >> 8) & 0xFF); + buf[2] = ((usecs >> 16) & 0xFF); + buf[3] = ((usecs >> 24) & 0xFF); sp_stream_buffer_op(S_CMD_O_DELAY, 4, buf); sp_opbuf_usage += 5; sp_prev_was_write = 0;
-
Stefan Tauner