And here is the output with rev 907 for the MCP79 board.
Ivo Anjo
On Thu, Feb 18, 2010 at 3:17 PM, Carl-Daniel Hailfinger < c-d.hailfinger.devel.2006@gmx.net> wrote:
Hi Ivo,
On 18.02.2010 15:08, Ivo Anjo wrote:
Attached is output with rev 906 for the MCP78S board. No problem at all. I think flashrom is a great app, so if I can help, I'm glad to.
Thanks, it is indeed very helpful to have that output.
flashrom v0.9.1-r906 No coreboot table found. DMI string 0: "System manufacturer" DMI string 1: "System Product Name" DMI string 2: "System Version" DMI string 3: "ASUSTeK Computer INC." DMI string 4: "M3N78-EM" DMI string 5: "Rev X.0x" Found ITE SuperI/O, id 8712 Found chipset "NVIDIA MCP78S", enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Guessed flash bus type is SPI Found SMBus device 10de:0752 at 00:01:1 SPI BAR is at 0xfcf80000, after clearing low bits BAR is at 0xfcf80000 Mapping MCP67 SPI at 0xfcf80000, unaligned size 0x544. SPI control is 0xc01a, enable=0, idle=0 SPI on this chipset is not supported yet. OK. This chipset supports the following protocols: None. Calibrating delay loop... 893M loops per second, 100 myus = 203 us. OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type None and chip
bus type Parallel are incompatible.
[...]
Works exactly as intended. Great news.
Regards, Carl-Daniel
-- "I do consider assignment statements and pointer variables to be among computer science's most valuable treasures." -- Donald E. Knuth