On Thu, Feb 18, 2010 at 3:17 PM, Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> wrote:

Hi Ivo,

On 18.02.2010 15:08, Ivo Anjo wrote:
> Attached is output with rev 906 for the MCP78S board.

> No problem at all. I think flashrom is a great app, so if I can help, I'm
> glad to.
>

Thanks, it is indeed very helpful to have that output.

> flashrom v0.9.1-r906
> No coreboot table found.
> DMI string 0: "System manufacturer"
> DMI string 1: "System Product Name"
> DMI string 2: "System Version"

> DMI string 3: "ASUSTeK Computer INC."

> DMI string 4: "M3N78-EM"
> DMI string 5: "Rev X.0x"
> Found ITE SuperI/O, id 8712
> Found chipset "NVIDIA MCP78S", enabling flash write...

> This chipset is not really supported yet. Guesswork...
> ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0

> Guessed flash bus type is SPI
> Found SMBus device 10de:0752 at 00:01:1
> SPI BAR is at 0xfcf80000, after clearing low bits BAR is at 0xfcf80000
> Mapping MCP67 SPI at 0xfcf80000, unaligned size 0x544.
> SPI control is 0xc01a, enable=0, idle=0
> SPI on this chipset is not supported yet.
> OK.
> This chipset supports the following protocols: None.
> Calibrating delay loop... 893M loops per second, 100 myus = 203 us. OK.
> Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type None and chip bus type Parallel are incompatible.
> [...]
>

Works exactly as intended. Great news.

Regards,
Carl-Daniel

--
"I do consider assignment statements and pointer variables to be among
computer science's most valuable treasures."
-- Donald E. Knuth