After a failed HP ME firmware on my HP Z200 the computer did displays a "management platform in manufacturing mode" message during bootup, and when I boot into windows my computer shuts off by itself after about 30 minutes. After Googling arround i found the some one with exact the same issue see: https://www.win-raid.com/t4165f39-Z-switches-off-after-minutes-unable-to-Ctr... After reading this post i ordered the CH341-A and decided to give a try with the modifed BIOS file made by plutomaniac the 7H3_0122.bin The only difference with the mainbord of Lost_N_BIOS is the BIOS chip, he does have a winbond W25Q64 and i do have a Macronix MXIC MX25L6445E I've tried to the flash the Bios with a clip but it failed, therefore i soldered the chip on the adapter and tried to flash it again. But again i get the error: FAILED at 0x00000000! Expected=0x00, Found=0xff, failed byte count from 0x00000000-0x007fffff: 0x33d731 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom@flashrom.org, thanks! See attached file for a verbose log file
Can you please help me? Verzonden vanuit Mailhttps://go.microsoft.com/fwlink/?LinkId=550986 voor Windows 10