After a failed HP ME firmware on my HP Z200 the computer did displays a "management
platform in manufacturing mode" message during bootup, and when I boot into windows
my computer shuts off by itself after about 30 minutes.
After Googling arround i found the some one with exact the same issue see:
After reading this post i ordered the CH341-A and decided to give a try with the modifed
BIOS file made by plutomaniac the 7H3_0122.bin
The only difference with the mainbord of Lost_N_BIOS is the BIOS chip, he does have a
winbond W25Q64 and i do have a Macronix MXIC MX25L6445E
I've tried to the flash the Bios with a clip but it failed, therefore i soldered the
chip on the adapter and tried to flash it again.
But again i get the error:
FAILED at 0x00000000! Expected=0x00, Found=0xff, failed byte count from
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net
(channel #flashrom) or
mail flashrom(a)flashrom.org, thanks!
See attached file for a verbose log file
Can you please help me?
Verzonden vanuit Mail<https://go.microsoft.com/fwlink/?LinkId=550986>