I have a TUMPA Lite edition it is FTDI Based Board similar to TUMPA/FT232H, but single channel: http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_Lite_User%27s_Manu...
You can build one from upper link, or buy cheap on ebay.
And I added this to ft2232_spi.c
--- ../flashrom/ft2232_spi.c 2013-09-17 19:43:16.000000000 +0200 +++ ft2232_spi.c 2014-01-24 11:57:49.000000000 +0100 @@ -43,6 +43,7 @@ #define FTDI_FT4232H_PID 0x6011 #define FTDI_FT232H_PID 0x6014 #define TIAO_TUMPA_PID 0x8a98 +#define TIAO_TUMPA_LITE_PID 0x8a99 #define AMONTEC_JTAGKEY_PID 0xCFF8
#define GOEPEL_VID 0x096C @@ -62,6 +63,7 @@ {FTDI_VID, FTDI_FT4232H_PID, OK, "FTDI", "FT4232H"}, {FTDI_VID, FTDI_FT232H_PID, OK, "FTDI", "FT232H"}, {FTDI_VID, TIAO_TUMPA_PID, OK, "TIAO", "USB Multi-Protocol Adapter"}, + {FTDI_VID, TIAO_TUMPA_LITE_PID, OK, "TIAO", "USB Multi-Protocol Adapter Lite"}, {FTDI_VID, AMONTEC_JTAGKEY_PID, OK, "Amontec", "JTAGkey"}, {GOEPEL_VID, GOEPEL_PICOTAP_PID, OK, "GOEPEL", "PicoTAP"}, {FIC_VID, OPENMOKO_DBGBOARD_PID, OK, "FIC", "OpenMoko Neo1973 Debug board (V2+)"}, @@ -208,6 +210,10 @@ /* Interface A is SPI1, B is SPI2. */ ft2232_type = TIAO_TUMPA_PID; channel_count = 2; + } else if (!strcasecmp(arg, "tumpalite")) { + /* Only one channel is used on lite edition */ + ft2232_type = TIAO_TUMPA_LITE_PID; + channel_count = 1; } else if (!strcasecmp(arg, "busblaster")) { /* In its default configuration it is a jtagkey clone */ ft2232_type = FTDI_FT2232H_PID;
works as advertised.
BRGDS, Jadran Puharic