Hi, just found FlashRom and looks to be a good base to start from for my needs.
I have a USB->SPI bridge device (MCP2210) and on it's SPI bus is a "S25FL128S" device.
It looks as though there is no direct support for accessing via the MCP2210.
I assume that I would need to write a "programmer" to get this to work ???
I have a MCP2210 access library that seems to work well via "/dev/hidraw".
Any advice/recommendations very welcome.
It may be that someone has already done this ...
Regards, Bob _____
Bob Selby Senior Engineer, Software - LTV Newbury
Snell a Quantel Company Innovation in the Multi-Screen World
T +44 (0) 1635 48222 Extn 3753
Turnpike Road, Newbury, Berkshire, RG14 2NX, UK
Routing http://www.snellgroup.com/products/routing/ | Modular Infrastructure http://www.snellgroup.com/products/modular-infrastructure/ | Conversion & Restoration http://www.snellgroup.com/products/conversion-and-restoration/ | Live Production http://www.snellgroup.com/products/production-and-master-control-switch ing/ | Automation & Media Management http://www.snellgroup.com/products/automation-and-media-management/ | Control & Monitoring http://www.snellgroup.com/products/control-and-monitoring/
This email and any attachments are confidential, may be legally privileged and are intended for the use of the addressee only. If you are not the intended recipient, please note that any use, disclosure, printing or copying of this email is strictly prohibited and may be unlawful. If received in error, please delete this email and any attachments and confirm this to the sender.
Snell Limited, registered number 1160119 Registered in England, registered office at 31 Turnpike Road, Newbury, Berkshire, RG14 2NX, U.K.