Hi, just found FlashRom and looks to be a good base to start from for my needs.

I have a USB->SPI bridge device (MCP2210) and on it’s SPI bus is a “S25FL128S” device.

It looks as though there is no direct support for accessing via the MCP2210.

I assume that I would need to write a “programmer” to get this to work ???

I have a MCP2210 access library that seems to work well via “/dev/hidraw”.

Any advice/recommendations very welcome.

It may be that someone has already done this …

Regards,
Bob
  _____  

Bob Selby

Senior Engineer, Software - LTV Newbury

Snell a Quantel Company
Innovation in the

Multi-Screen World

 

T +44 (0) 1635 48222 Extn 3753

Turnpike Road, Newbury, Berkshire, RG14 2NX, UK

Routing | Modular Infrastructure | Conversion & Restoration | Live Production | Automation & Media Management | Control & Monitoring


This email and any attachments are confidential, may be legally privileged and are intended for the use of the addressee only. If you are not the intended recipient, please note that any use, disclosure, printing or copying of this email is strictly prohibited and may be unlawful. If received in error, please delete this email and any attachments and confirm this to the sender.

Snell Limited, registered number 1160119
Registered in England, registered office at 31 Turnpike Road, Newbury, Berkshire, RG14 2NX, U.K.