2011/1/6 Diego Elio Pettenò flameeyes@gmail.com
Il giorno sab, 01/01/2011 alle 14.45 +0100, Michael Karcher ha scritto:
Could you still please add a second device (keep the subsystem IDs zero if there are none) to the match? I would recommend the LPC bridge, as the GPIO pins reside in that chip.
Uhm that's tricky, because the board was at a customer's, but this is from the full lspci (not -v nor -n) which I saved:
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
and iirc it has the same subsystem ID as the one device I added; hopefully Idwer can confirm?
From lspci -vvnnxxx:
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: iTCO_wdt, intel-rng 00: 86 80 d0 24 0f 00 80 02 02 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 01 08 00 00 10 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 81 04 00 00 10 00 00 00 60: 8a 8b 85 87 d0 00 00 00 8b 80 80 8b 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: ff fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 20 02 00 00 01 00 00 00 0d 00 00 00 00 03 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 86 21 02 00 02 0f 00 00 04 00 00 00 00 00 00 00 e0: 00 00 00 80 00 00 08 14 33 22 11 00 00 00 67 45 f0: 00 00 40 00 04 00 00 00 66 0f 05 3e 00 00 00 00
-- Diego Elio Pettenò — Flameeyes http://blog.flameeyes.eu/