2011/1/6 Diego Elio Pettenò <flameeyes@gmail.com>
Il giorno sab, 01/01/2011 alle 14.45 +0100, Michael Karcher ha scritto:
>
> Could you still please add a second device (keep the subsystem IDs
> zero
> if there are none) to the match? I would recommend the LPC bridge, as
> the GPIO pins reside in that chip.

Uhm that's tricky, because the board was at a customer's, but this is
from the full lspci (not -v nor -n) which I saved:

00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC
Interface Bridge (rev 02)

and iirc it has the same subsystem ID as the one device I added;
hopefully Idwer can confirm?

From lspci -vvnnxxx:

00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Kernel modules: iTCO_wdt, intel-rng
00: 86 80 d0 24 0f 00 80 02 02 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 08 00 00 10 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 81 04 00 00 10 00 00 00
60: 8a 8b 85 87 d0 00 00 00 8b 80 80 8b 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: ff fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 20 02 00 00 01 00 00 00 0d 00 00 00 00 03 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 86 21 02 00 02 0f 00 00 04 00 00 00 00 00 00 00
e0: 00 00 00 80 00 00 08 14 33 22 11 00 00 00 67 45
f0: 00 00 40 00 04 00 00 00 66 0f 05 3e 00 00 00 00


--
Diego Elio Pettenò — Flameeyes
http://blog.flameeyes.eu/