On Sat, May 28, 2011 at 4:28 PM, Stefan Tauner stefan.tauner@student.tuwien.ac.at wrote:
hello
thanks for your report! i have marked the SST49LF020 as fully supported and will commit it later.
your report also shows that your board is matched by a board enable, but does not need it. i would like to investigate that a bit further and need your help to do so. can you please run lspci -nnvvvxxx and superiotool -deV as root and send us their output?
did you execute flashrom for the first time (after a reboot) in the above log or was it executed more than once and if so, did you ever enforce the board enable with -m for those runs?
thanks in advance
Kind regards/Mit freundlichen Grüßen, Stefan Tauner
Hi,
I attached the logs. (Just noticed I missed one extra level of verbosity in lspci)
Earlier flashrom log was created after successful read, read, erase, read, read cycle. I did not have to use -m at any phase.
One word of warning when you take a look at logs. Coreboot (4.0 r6554) manages to boot fine with seabios payload, but I'm having similar problems as in http://www.mail-archive.com/coreboot@coreboot.org/msg29682.html (PS/2 keyboard not working, boot device not found. Compiled with crossgcc or Ubuntu 4.4.3-4ubuntu5-gcc).
Today I also noticed that link of onboard NIC did not go up after several coreboot boot attempts. (Also attached dmesg.txt)