[    0.000000] Linux version 2.6.24-16-rtai (root@hardy) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 Tue Sep 30 22:54:33 EEST 2008 (Ubuntu 2.6.24-12.22-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[    0.000000]  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   131056
[    0.000000]   HighMem    131056 ->   131056
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   131056
[    0.000000] On node 0 totalpages: 131056
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 991 pages used for memmap
[    0.000000]   Normal zone: 125969 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130033
[    0.000000] Kernel command line: root=UUID=67fb6834-d33f-4e5c-a6ff-b55024efd4b1 ro quiet splash
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] Detected 2211.319 MHz processor.
[   21.743047] I-pipe 2.0-04: pipeline enabled.
[   21.743054] spurious 8259A interrupt: IRQ7.
[   21.745122] Console: colour VGA+ 80x25
[   21.745125] console [tty0] enabled
[   21.745441] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[   21.745705] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[   21.754637] Memory: 509936k/524224k available (1440k kernel code, 13708k reserved, 573k data, 228k init, 0k highmem)
[   21.754644] virtual kernel memory layout:
[   21.754645]     fixmap  : 0xfffed000 - 0xfffff000   (  72 kB)
[   21.754646]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   21.754648]     vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
[   21.754649]     lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
[   21.754650]       .init : 0xc02fa000 - 0xc0333000   ( 228 kB)
[   21.754651]       .data : 0xc026836d - 0xc02f77ec   ( 573 kB)
[   21.754652]       .text : 0xc0100000 - 0xc026836d   (1440 kB)
[   21.754655] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   21.754685] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[   21.834693] Calibrating delay using timer specific routine.. 4423.94 BogoMIPS (lpj=8847891)
[   21.834715] Security Framework initialized
[   21.834719] SELinux:  Disabled at boot.
[   21.834729] AppArmor: AppArmor initialized
[   21.834733] Failure registering capabilities with primary security module.
[   21.834738] Mount-cache hash table entries: 512
[   21.834820] CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003 00000000
[   21.834826] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   21.834828] CPU: L2 Cache: 512K (64 bytes/line)
[   21.834830] CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003 00000000
[   21.834837] Compat vDSO mapped to ffffe000.
[   21.834844] CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01
[   21.834849] Checking 'hlt' instruction... OK.
[   21.850813] Freeing SMP alternatives: 0k freed
[   21.850942] net_namespace: 64 bytes
[   21.851266] NET: Registered protocol family 16
[   21.851392] EISA bus registered
[   21.856182] PCI: PCI BIOS revision 3.00 entry at 0xf21d0, last bus=5
[   21.856184] PCI: Using configuration type 1
[   21.856186] Setting up standard PCI resources
[   21.861710] Linux Plug and Play Support v0.97 (c) Adam Belay
[   21.861866] PCI: Probing PCI hardware
[   21.861875] PCI: Probing PCI hardware (bus 00)
[   21.862236] PCI: Transparent bridge - 0000:00:09.0
[   21.863343] PCI: Using IRQ router default [10de/005e] at 0000:00:00.0
[   21.930743] AppArmor: AppArmor Filesystem Enabled
[   21.930991] PCI: Bridge: 0000:00:09.0
[   21.930992]   IO window: disabled.
[   21.930995]   MEM window: disabled.
[   21.930997]   PREFETCH window: disabled.
[   21.930999] PCI: Bridge: 0000:00:0b.0
[   21.931000]   IO window: disabled.
[   21.931002]   MEM window: disabled.
[   21.931004]   PREFETCH window: disabled.
[   21.931006] PCI: Bridge: 0000:00:0c.0
[   21.931007]   IO window: disabled.
[   21.931009]   MEM window: disabled.
[   21.931011]   PREFETCH window: disabled.
[   21.931013] PCI: Bridge: 0000:00:0d.0
[   21.931014]   IO window: disabled.
[   21.931016]   MEM window: disabled.
[   21.931018]   PREFETCH window: disabled.
[   21.931022] PCI: Bridge: 0000:00:0e.0
[   21.931024]   IO window: disabled.
[   21.931026]   MEM window: d0000000-d7ffffff
[   21.931028]   PREFETCH window: c0000000-cfffffff
[   21.931034] PCI: Setting latency timer of device 0000:00:09.0 to 64
[   21.931040] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   21.931045] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   21.931050] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   21.931055] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   21.931063] NET: Registered protocol family 2
[   21.934685] Time: tsc clocksource has been installed.
[   21.966725] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   21.966898] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[   21.967016] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[   21.967082] TCP: Hash tables configured (established 16384 bind 16384)
[   21.967085] TCP reno registered
[   21.978787] checking if image is initramfs... it is
[   22.445080] Freeing initrd memory: 6504k freed
[   22.445463] audit: initializing netlink socket (disabled)
[   22.445477] audit(1305644202.692:1): initialized
[   22.446804] VFS: Disk quotas dquot_6.5.1
[   22.446822] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   22.446920] io scheduler noop registered
[   22.446921] io scheduler anticipatory registered
[   22.446923] io scheduler deadline registered
[   22.446930] io scheduler cfq registered (default)
[   22.470653] Boot video device is 0000:01:00.0
[   22.470727] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   22.470744] assign_interrupt_mode Found MSI capability
[   22.470746] Allocate Port Service[0000:00:0b.0:pcie00]
[   22.470792] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   22.470808] assign_interrupt_mode Found MSI capability
[   22.470810] Allocate Port Service[0000:00:0c.0:pcie00]
[   22.470850] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   22.470866] assign_interrupt_mode Found MSI capability
[   22.470868] Allocate Port Service[0000:00:0d.0:pcie00]
[   22.470908] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   22.470923] assign_interrupt_mode Found MSI capability
[   22.470925] Allocate Port Service[0000:00:0e.0:pcie00]
[   22.471029] isapnp: Scanning for PnP cards...
[   22.823461] isapnp: No Plug & Play device found
[   22.844198] Real Time Clock Driver v1.12ac
[   22.844202] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   22.844305] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   22.844993] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   22.845058] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   22.845142] PNP: No PS/2 controller found. Probing ports directly.
[   22.847882] serio: i8042 KBD port at 0x60,0x64 irq 1
[   22.847887] serio: i8042 AUX port at 0x60,0x64 irq 12
[   22.850775] mice: PS/2 mouse device common for all mice
[   22.850852] EISA: Probing bus 0 at eisa.0
[   22.850864] Cannot allocate resource for EISA slot 4
[   22.850874] EISA: Detected 0 cards.
[   22.850956] NET: Registered protocol family 1
[   22.850965] Using IPI Shortcut mode
[   22.851066] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   22.851067] EDD information not available.
[   22.851336] Freeing unused kernel memory: 228k freed
[   22.882617] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   23.446558] Clocksource tsc unstable (delta = 88042054 ns)
[   23.450553] Time: pit clocksource has been installed.
[   24.113473] fuse init (API version 7.9)
[   24.283252] usbcore: registered new interface driver usbfs
[   24.283273] usbcore: registered new interface driver hub
[   24.298180] usbcore: registered new device driver usb
[   24.311585] PCI: Setting latency timer of device 0000:00:02.1 to 64
[   24.311589] ehci_hcd 0000:00:02.1: EHCI Host Controller
[   24.311876] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[   24.311907] ehci_hcd 0000:00:02.1: debug port 1
[   24.311910] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[   24.311918] ehci_hcd 0000:00:02.1: irq 11, io mem 0xfeb00000
[   24.312560] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   24.312682] SCSI subsystem initialized
[   24.323159] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   24.323290] usb usb1: configuration #1 chosen from 1 choice
[   24.323308] hub 1-0:1.0: USB hub found
[   24.323319] hub 1-0:1.0: 10 ports detected
[   24.335447] libata version 3.00 loaded.
[   24.426673] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   24.426677] ohci_hcd 0000:00:02.0: OHCI Host Controller
[   24.426701] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[   24.426713] ohci_hcd 0000:00:02.0: irq 3, io mem 0xd8004000
[   24.485237] usb usb2: configuration #1 chosen from 1 choice
[   24.485256] hub 2-0:1.0: USB hub found
[   24.485262] hub 2-0:1.0: 10 ports detected
[   24.586620] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[   24.586641] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   24.866427] usb 2-4: new low speed USB device using ohci_hcd and address 2
[   25.033153] usb 2-4: configuration #1 chosen from 1 choice
[   25.049659] usbcore: registered new interface driver hiddev
[   25.057301] input: Contour Design RollerMouse as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input2
[   25.066434] input,hidraw0: USB HID v1.10 Mouse [Contour Design RollerMouse] on usb-0000:00:02.0-4
[   25.066447] usbcore: registered new interface driver usbhid
[   25.066451] /home/juve/hardy-packages/linux-git/ubuntu-hardy/debian/build/custom-source-rtai/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   25.106757] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:15:f2:17:18:f1
[   25.106762] forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
[   25.108462] pata_amd 0000:00:06.0: version 0.3.10
[   25.108514] PCI: Setting latency timer of device 0000:00:06.0 to 64
[   25.109196] scsi0 : pata_amd
[   25.109482] scsi1 : pata_amd
[   25.109503] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[   25.109506] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[   25.270622] ata1.00: ATA-4: , 20070308, max UDMA/66
[   25.270626] ata1.00: 16088688 sectors, multi 0: LBA 
[   25.270636] ata1.00: limited to UDMA/33 due to 40-wire cable
[   25.286551] ata1.00: configured for UDMA/33
[   25.453214] scsi 0:0:0:0: Direct-Access     ATA                       2007 PQ: 0 ANSI: 5
[   25.457216] sata_nv 0000:00:07.0: version 3.5
[   25.457232] sata_nv 0000:00:07.0: Using ADMA mode
[   25.457286] PCI: Setting latency timer of device 0000:00:07.0 to 64
[   25.458151] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   25.458154] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   25.459196] scsi2 : sata_nv
[   25.459606] scsi3 : sata_nv
[   25.459629] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 11
[   25.459632] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 11
[   25.770346] ata3: SATA link down (SStatus 0 SControl 300)
[   26.082315] ata4: SATA link down (SStatus 0 SControl 300)
[   26.082354] sata_nv 0000:00:08.0: Using ADMA mode
[   26.082397] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   26.082501] scsi4 : sata_nv
[   26.082706] scsi5 : sata_nv
[   26.082724] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 5
[   26.082727] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 5
[   26.394287] ata5: SATA link down (SStatus 0 SControl 300)
[   26.706257] ata6: SATA link down (SStatus 0 SControl 300)
[   26.712240] Driver 'sd' needs updating - please use bus_type methods
[   26.712322] sd 0:0:0:0: [sda] 16088688 512-byte hardware sectors (8237 MB)
[   26.712334] sd 0:0:0:0: [sda] Write Protect is off
[   26.712336] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   26.712349] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   26.712385] sd 0:0:0:0: [sda] 16088688 512-byte hardware sectors (8237 MB)
[   26.712392] sd 0:0:0:0: [sda] Write Protect is off
[   26.712394] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   26.712404] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   26.712407]  sda: sda1 sda2 < sda5 >
[   26.733241] sd 0:0:0:0: [sda] Attached SCSI disk
[   26.736593] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   26.902864] EXT3-fs: INFO: recovery required on readonly filesystem.
[   26.902868] EXT3-fs: write access will be enabled during recovery.
[   28.385850] kjournald starting.  Commit interval 5 seconds
[   28.385866] EXT3-fs: recovery complete.
[   28.388695] EXT3-fs: mounted filesystem with ordered data mode.
[   32.538391] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[   32.538421] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[   32.857924] udev: renamed network interface eth0 to eth1
[   33.293079] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   33.427513] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   33.613916] intel8x0_measure_ac97_clock: measured 54664 usecs
[   33.613920] intel8x0: clocking to 46854
[   35.166948] lp: driver loaded but no devices found
[   35.213145] Adding 393552k swap on /dev/sda5.  Priority:-1 extents:1 across:393552k
[   35.743306] EXT3 FS on sda1, internal journal
[   36.583731] ip_tables: (C) 2000-2006 Netfilter Core Team
[   37.379728] NET: Registered protocol family 10
[   37.380285] lo: Disabled Privacy Extensions
[   38.053585] ppdev: user-space parallel port driver
[   38.105915] audit(1305644219.004:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4129 profile="/usr/sbin/cupsd" namespace="default"
[   38.556635] eth1: no link during initialization.
[   38.556932] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   38.580082] Bluetooth: Core ver 2.11
[   38.586186] NET: Registered protocol family 31
[   38.586190] Bluetooth: HCI device and connection manager initialized
[   38.586194] Bluetooth: HCI socket layer initialized
[   38.625688] Bluetooth: L2CAP ver 2.9
[   38.625692] Bluetooth: L2CAP socket layer initialized
[   38.649724] Bluetooth: RFCOMM socket layer initialized
[   38.650118] Bluetooth: RFCOMM TTY layer initialized
[   38.650121] Bluetooth: RFCOMM ver 1.8