Hi,
It is failed on my board when flashing firmware R68 10599. Can you help me on it?
HW: Soraka DVT1
Issue description: Flash firmware 10431 without any problems, but it is failed when flashing firmware R68 10599. Steps are:
1. Download firmware R68 10599https://www.google.com/chromeos/partner/fe/#download:event=IMAGE_DOWNLOAD&url=image_download?version~E010599.0000.0000~Aboard~Esoraka~Achannel~Edev~Atype~EFIRMWARE_IMAGE_ARCHIVE&rel=true, then extract it.
2. Enter board terminal localhost /home # flashrom -w 10599/image.bin flashrom v0.9.9 : cfd7dfc : Apr 06 2018 05:12:10 UTC on Linux 4.4.128 (x86_64) flashrom v0.9.9 : cfd7dfc : Apr 06 2018 05:12:10 UTC on Linux 4.4.128 (x86_64) Calibrating delay loop... OK. coreboot table found at 0x7aac5000. WARNING: SPI Configuration Lockdown activated. Erasing and writing flash chip... Verifying flash... VERIFY FAILED at 0x00000081! Expected=0xff, Read=0x0b, failed byte count from 0x00000000-0x00ffffff: 0x9 Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net (channel #flashrom) or mail flashrom@flashrom.org with FAILED: your board name in the subject line! ------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF! FAILED
3. Try to update firmware localhost /home/10599 # chromeos-firmwareupdate -m autoupdate Starting Google_Soraka firmware updater v4 (autoupdate)... - Updater package: [Google_Soraka.10431.32.0 / EC:soraka_v1.1.8047-2c5917d7d] - Current system: [RO:Google_Soraka.10431.32.0 , ACT:Google_Soraka.10431.32.0 / EC:soraka_v1.1.8047-2c5917d7d] - Write protection: Hardware: ON, Software: Main=off * invoke: flashrom -p host -r _current/bios.bin RO Contents are different. autoupdate(recovery): update RO+RW * invoke: flashrom -p host --fast-verify -w bios.bin autoupdate(recovery): update ec/RO+RW * invoke: flashrom -p ec --fast-verify -w ec.bin autoupdate(recovery): EC may be restored or updated in next boot. Firmware update (autoupdate) completed.
4. Reboot the board, then power off and power on
5. Flash fw 10599 again localhost /home # flashrom -w 10599/image.bin flashrom v0.9.9 : cfd7dfc : Apr 06 2018 05:12:10 UTC on Linux 4.4.128 (x86_64) flashrom v0.9.9 : cfd7dfc : Apr 06 2018 05:12:10 UTC on Linux 4.4.128 (x86_64) Calibrating delay loop... OK. coreboot table found at 0x7aac5000. WARNING: SPI Configuration Lockdown activated. Erasing and writing flash chip... Verifying flash... VERIFY FAILED at 0x00000081! Expected=0xff, Read=0x0b, failed byte count from 0x00000000-0x00ffffff: 0x9 Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net (channel #flashrom) or mail flashrom@flashrom.org with FAILED: your board name in the subject line! ------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF! FAILED
Thanks
Br, Hongxia