Hi,

It is failed on my board when flashing firmware R68 10599. Can you help me on it?

HW: Soraka DVT1

Issue description:

Flash firmware 10431 without any problems, but it is failed when flashing firmware R68 10599. Steps are:

1. Download firmware R68 10599, then extract it.

2. Enter board terminal

localhost /home # flashrom -w 10599/image.bin

flashrom v0.9.9 : cfd7dfc : Apr 06 2018 05:12:10 UTC on Linux 4.4.128 (x86_64)

Calibrating delay loop... OK.

coreboot table found at 0x7aac5000.

WARNING: SPI Configuration Lockdown activated.

Erasing and writing flash chip... Verifying flash... VERIFY FAILED at 0x00000081! Expected=0xff, Read=0x0b, failed byte count from 0x00000000-0x00ffffff: 0x9

Your flash chip is in an unknown state.

Get help on IRC at irc.freenode.net (channel #flashrom) or

mail flashrom@flashrom.org with FAILED: your board name in the subject line!

-------------------------------------------------------------------------------

DO NOT REBOOT OR POWEROFF!

FAILED

3. Try to update firmware

localhost /home/10599 # chromeos-firmwareupdate -m autoupdate

Starting Google_Soraka firmware updater v4 (autoupdate)...

- Updater package: [Google_Soraka.10431.32.0 / EC:soraka_v1.1.8047-2c5917d7d]

- Current system: [RO:Google_Soraka.10431.32.0 , ACT:Google_Soraka.10431.32.0 / EC:soraka_v1.1.8047-2c5917d7d]

- Write protection: Hardware: ON, Software: Main=off

* invoke: flashrom -p host -r _current/bios.bin

RO Contents are different.

autoupdate(recovery): update RO+RW

* invoke: flashrom -p host --fast-verify -w bios.bin

autoupdate(recovery): update ec/RO+RW

* invoke: flashrom -p ec --fast-verify -w ec.bin

autoupdate(recovery): EC may be restored or updated in next boot.

Firmware update (autoupdate) completed.

4. Reboot the board, then power off and power on

5. Flash fw 10599 again