On Fri, 14 Dec 2012 21:08:41 -0500 "Gianfranco Liuzzi" gielle@mail.com wrote:
Hi, while there is no guarantee that it will work (and you have to choose the right image of course), I do not see any potential problems in the log.
Multiple flash chips were detected: "W39V040B", "W39V040FB" Please specify which chip to use with the -c <chipname> option.
You just has to use the option to select one of the chips. If you want to make sure then look at the chip on the board, but the two chips are similar enough that both should work. Good luck!