----- Original Message ----- From: Stefan Tauner Sent: 12/14/12 03:13 AM To: gielle@mail.com Subject: Re: [flashrom] My mainboard is not on the list, but I need to upgrade the Bios
On Thu, 13 Dec 2012 20:30:51 -0500 gielle@mail.com wrote: > I need to upgrade the BIOS version of my mainboard, but is not on the list of supported mainboards. Can you tell me if it will work based on data from similar mainboards? It's an ASRock 775Dual VSTA with a Pentium D processor. Current BIOS version is 2.58, I need it upgraded to 2.90. > please send us the output of flashrom -p internal -V (you can use the -o option to redirect it to a file). -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner Here is the output of "flashrom -o /home/lex/flash -p internal -V"
Thanks for the reply.
flashrom v0.9.5.2-r1546 on Linux 3.2.0-4-amd64 (x86_64) flashrom was built with libpci 3.1.7, GCC 4.6.2, little endian Command line (5 args): flashrom -o /home/lex/flash -p internal -V Calibrating delay loop... OS timer resolution is 1 usecs, 2007M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 999 us, 10000 myus = 10005 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "To Be Filled By O.E.M." DMI string system-product-name: "775Dual-VSTA" DMI string system-version: "To Be Filled By O.E.M." DMI string baseboard-manufacturer: " " DMI string baseboard-product-name: "775Dual-VSTA" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" W836xx Hardware Monitor at port 0295 Found Winbond Super I/O, id 60 Found chipset "VIA VT8237A" with PCI ID 1106:3337. Enabling flash write... OK. The following protocols are supported: Non-SPI. Probing for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 kB: probe_jedec_common: id1 0x0f, id2 0x6a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 kB: probe_jedec_common: id1 0x0f, id2 0x6a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BB, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BT, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BB, 256 kB: probe_jedec_common: id1 0x0f, id2 0x6a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BT, 256 kB: probe_jedec_common: id1 0x0f, id2 0x6a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BB, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BT, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BB, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BT, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002B, 256 kB: probe_jedec_common: id1 0x0f, id2 0x6a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 kB: probe_jedec_common: id1 0x0f, id2 0x6a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Atmel AT29C512, 64 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Atmel AT29C010A, 128 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Atmel AT29C020, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Atmel AT29C040A, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Atmel AT49BV512, 64 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Atmel AT49F002(N), 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Atmel AT49F002(N)T, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Atmel AT49F020, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Atmel AT49F040, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x0f, id2 0x6a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Catalyst CAT28F512, 64 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Bright BM29F040, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for EMST F49B002UA, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Eon EN29F010, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)B, 256 kB: probe_jedec_common: id1 0x0f, id2 0x6a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)T, 256 kB: probe_jedec_common: id1 0x0f, id2 0x6a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29LV640B, 8192 kB: probe_en29lv640b: id1 0x0000, id2 0x0000 Probing for Fujitsu MBM29F004BC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Fujitsu MBM29F400TC, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for Hyundai HY29F002T, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Hyundai HY29F002B, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Hyundai HY29F040A, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-B, 128 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Intel 28F001BN/BX-T, 128 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Intel 28F002BC/BL/BV/BX-T, 256 kB: probe_82802ab: id1 0x0f, id2 0x6a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F008S3/S5/SC, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-T, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-T, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001B, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002(N)B, 256 kB: probe_jedec_common: id1 0x0f, id2 0x6a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002(N)T, 256 kB: probe_jedec_common: id1 0x0f, id2 0x6a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000B, 64 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for MoselVitelic V29C51000T, 64 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for MoselVitelic V29C51400B, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for MoselVitelic V29C51400T, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for MoselVitelic V29LC51000, 64 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for MoselVitelic V29LC51001, 128 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for MoselVitelic V29LC51002, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for PMC Pm29F002T, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x0f, id2 0x6a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x0f, id2 0x6a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV020, 256 kB: probe_jedec_common: id1 0x0f, id2 0x6a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV040, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV512, 64 kB: probe_jedec_common: id1 0x05, id2 0xf0, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Sharp LH28F008BJT-BTLZ1, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST28SF040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE010, 128 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST29LE010, 128 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST29EE020A, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST29LE020, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST39SF512, 64 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST39SF010A, 128 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST39SF040, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST39VF512, 64 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST39VF010, 128 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST39VF020, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST39VF040, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST39VF080, 1024 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xda, id2 0x54 Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002B, 256 kB: probe_jedec_common: id1 0x0f, id2 0x6a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 kB: probe_jedec_common: id1 0x0f, id2 0x6a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BB, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29F400BT, 512 kB: probe_m29f400bt: id1 0xff, id2 0xff Probing for ST M29W010B, 128 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 kB: probe_jedec_common: id1 0x05, id2 0xf0, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x0f, id2 0x6a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for TI TMS29F002RB, 256 kB: probe_jedec_common: id1 0x0f, id2 0x6a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 kB: probe_jedec_common: id1 0x0f, id2 0x6a, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012-old, 128 kB: Old Winbond W29* probe method disabled because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29C010(M)/W29C011A/W29EE011/W29EE012-old' if you have a board with such a chip. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W29C020(C)/W29C022, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W29C040/P, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W39L040, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Found Winbond flash chip "W39V040B" (512 kB, LPC) at physical address 0xfff80000. Lockout bits: Hardware bootblock locking (#TBL) is not active. Hardware remaining chip locking (#WP) is not active.. Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Found Winbond flash chip "W39V040FB" (512 kB, FWH) at physical address 0xfff80000. Lockout bits: Hardware bootblock locking (#TBL) is not active. Hardware remaining chip locking (#WP) is not active.. Lock status of block at 0x00000000 is Full Access. Lock status of block at 0x00010000 is Full Access. Lock status of block at 0x00020000 is Full Access. Lock status of block at 0x00030000 is Full Access. Lock status of block at 0x00040000 is Full Access. Lock status of block at 0x00050000 is Full Access. Lock status of block at 0x00060000 is Full Access. Lock status of block at 0x00070000 is Full Access. Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W49F002U/N, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W49F020, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xda, id2 0x54 Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xda, id2 0x54 Multiple flash chips were detected: "W39V040B", "W39V040FB" Please specify which chip to use with the -c <chipname> option. Restoring PCI config space for 00:11:0 reg 0x40 Restoring PCI config space for 00:11:0 reg 0x41
On Fri, 14 Dec 2012 21:08:41 -0500 "Gianfranco Liuzzi" gielle@mail.com wrote:
Hi, while there is no guarantee that it will work (and you have to choose the right image of course), I do not see any potential problems in the log.
Multiple flash chips were detected: "W39V040B", "W39V040FB" Please specify which chip to use with the -c <chipname> option.
You just has to use the option to select one of the chips. If you want to make sure then look at the chip on the board, but the two chips are similar enough that both should work. Good luck!
-
Gianfranco Liuzzi -
Stefan Tauner