Hi, I am a newbie, so please be patient. I want flash my bios because I have a suspect of an internal rootkit. I have found the following link https://tomvanveen.eu/flashing-bios-chip-raspberry-pi/ where it looks pretty easy to flash the chip by raspberry. I have a pomona 5250 clip and my problem is connect the clip to the exact pins on the W25X32 chip (from raspberry). I have downloaded the datasheet here: http://pdf1.alldatasheet.com/datasheet-pdf/view/207471/WINBOND/W25X32/+Q07W8... In the above link (https://tomvanveen.eu/flashing-bios-chip-raspberry-pi/) there is the schema to connect the wires.. but what I don't understand is if the raspberry pin 17 must be connected to 3 pins on the chip.. On the schema there is written:
(raspberry) 17 ---> (w25x32) VCC 3.3V and /HOLD and /WP
Then do I have to connect the pin 17 to vcc and /hold and /wp ???? I ask this because seeing the photos it looks connected to just one pin. Thank you very much. LWS