# flashrom -V flashrom v0.9.5.2-r1546 on Linux 3.10-3-686-pae (i686) flashrom is free software, get the source code at http://www.flashrom.org
flashrom was built with libpci 3.1.9, GCC 4.7.1, little endian Command line (1 args): flashrom -V Calibrating delay loop... OS timer resolution is 1 usecs, 1863M loops per second, 10 myus = 11 us, 100 myus = 95 us, 1000 myus = 935 us, 10000 myus = 9859 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Acer" DMI string system-product-name: "Aspire 8930" DMI string system-version: "V1.10" DMI string baseboard-manufacturer: "Acer" DMI string baseboard-product-name: "Aspire 8930" DMI string baseboard-version: "PSMBOU-1234567" DMI string chassis-type: "Other" DMI chassis-type is not specific enough. W836xx enter config mode worked or we were already in config mode. W836xx leave config mode had no effect. Active config mode, unknown reg 0x20 ID: 85.
# superiotool -d superiotool r6637 Found ITE IT8512E/F/G (id=0x8512, rev=0x0) at 0x2e Register dump: idx 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e val 85 12 60 01 00 00 00 00 00 00 00 00 01 00 00 def 85 12 22 01 NA 00 00 NA NA NA NA NA NA 00 NA LDN 0x04 (System Wake-Up) idx 30 60 61 62 63 70 71 val 01 00 00 00 00 00 01 def 00 00 00 00 00 00 03 LDN 0x05 (Mouse) idx 30 60 61 62 63 70 71 f0 val 01 00 00 00 00 0c 01 00 def 00 00 00 00 00 0c 03 NA LDN 0x06 (Keyboard) idx 30 60 61 62 63 70 71 f0 val 01 00 60 00 64 01 01 00 def 00 00 60 00 64 01 03 NA LDN 0x0f (Shared Memory/Flash) idx 30 60 61 62 63 70 71 f4 f5 f6 val 01 02 00 00 00 00 00 09 00 00 def 00 00 00 00 00 00 00 00 00 00 LDN 0x10 (BRAM) idx 30 60 61 62 63 70 71 f3 f4 f5 val 01 00 70 06 00 08 01 00 3f 3f def 00 00 70 00 72 08 00 NA NA NA LDN 0x11 (Power Channel 1) idx 30 60 61 62 63 70 71 val 01 00 62 00 66 00 01 def 00 00 62 00 66 01 03 LDN 0x12 (Power Channel 2) idx 30 60 61 62 63 70 71 val 01 00 68 00 6c 00 01 def 00 00 68 00 6c 01 03 Found SMSC SCH5317 (id=0x85, rev=0x12) at 0x2e No dump available for this Super I/O
# sensors acpitz-virtual-0 Adapter: Virtual device temp1: +39.0°C (crit = +106.0°C) temp2: +77.0°C (crit = +106.0°C) temp3: +79.0°C (crit = +106.0°C) temp4: +40.0°C (crit = +106.0°C)
coretemp-isa-0000 Adapter: ISA adapter Core 0: +27.0°C (high = +90.0°C, crit = +90.0°C) Core 1: +27.0°C (high = +90.0°C, crit = +90.0°C)
¯(º_o)/¯