# flashrom -V
flashrom v0.9.5.2-r1546 on Linux 3.10-3-686-pae (i686)
flashrom is free software, get the source code at http://www.flashrom.org

flashrom was built with libpci 3.1.9, GCC 4.7.1, little endian
Command line (1 args): flashrom -V
Calibrating delay loop... OS timer resolution is 1 usecs, 1863M loops per second, 10 myus = 11 us, 100 myus = 95 us, 1000 myus = 935 us, 10000 myus = 9859 us, 4 myus = 5 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "Acer"
DMI string system-product-name: "Aspire 8930"
DMI string system-version: "V1.10"
DMI string baseboard-manufacturer: "Acer"
DMI string baseboard-product-name: "Aspire 8930"
DMI string baseboard-version: "PSMBOU-1234567"
DMI string chassis-type: "Other"
DMI chassis-type is not specific enough.
W836xx enter config mode worked or we were already in config mode. W836xx leave config mode had no effect.
Active config mode, unknown reg 0x20 ID: 85.

# superiotool -d
superiotool r6637
Found ITE IT8512E/F/G (id=0x8512, rev=0x0) at 0x2e
Register dump:
idx 20 21 22 23 24 25 26 27  28 29 2a 2b 2c 2d 2e
val 85 12 60 01 00 00 00 00  00 00 00 00 01 00 00
def 85 12 22 01 NA 00 00 NA  NA NA NA NA NA 00 NA
LDN 0x04 (System Wake-Up)
idx 30 60 61 62 63 70 71
val 01 00 00 00 00 00 01
def 00 00 00 00 00 00 03
LDN 0x05 (Mouse)
idx 30 60 61 62 63 70 71 f0
val 01 00 00 00 00 0c 01 00
def 00 00 00 00 00 0c 03 NA
LDN 0x06 (Keyboard)
idx 30 60 61 62 63 70 71 f0
val 01 00 60 00 64 01 01 00
def 00 00 60 00 64 01 03 NA
LDN 0x0f (Shared Memory/Flash)
idx 30 60 61 62 63 70 71 f4  f5 f6
val 01 02 00 00 00 00 00 09  00 00
def 00 00 00 00 00 00 00 00  00 00
LDN 0x10 (BRAM)
idx 30 60 61 62 63 70 71 f3  f4 f5
val 01 00 70 06 00 08 01 00  3f 3f
def 00 00 70 00 72 08 00 NA  NA NA
LDN 0x11 (Power Channel 1)
idx 30 60 61 62 63 70 71
val 01 00 62 00 66 00 01
def 00 00 62 00 66 01 03
LDN 0x12 (Power Channel 2)
idx 30 60 61 62 63 70 71
val 01 00 68 00 6c 00 01
def 00 00 68 00 6c 01 03
Found SMSC SCH5317 (id=0x85, rev=0x12) at 0x2e
No dump available for this Super I/O

# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1:        +39.0°C  (crit = +106.0°C)
temp2:        +77.0°C  (crit = +106.0°C)
temp3:        +79.0°C  (crit = +106.0°C)
temp4:        +40.0°C  (crit = +106.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0:       +27.0°C  (high = +90.0°C, crit = +90.0°C)
Core 1:       +27.0°C  (high = +90.0°C, crit = +90.0°C)