Re: [flashrom] Help: trouble when flashing rom

19 Apr 2011

      Sorry for not using "reply to all.
I've attached the output of dmesg to this mail.
Hope you can help me further on this issue.
Kind regards,
Cyrille Bartholomée | De Damhouderestraat 20 | 2018 Antwerpen
t. 0032 3 298 4244 | m. 0032 499 711 018 | e. cyrille@bartholomee.com
Op dinsdag 19 april 2011 12:29:22 schreef Idwer Vollering:
...
Please use "reply to all" in the future. Thanks.
2011/4/19 Cyrille Bartholomée cyrille@bartholomee.com:
...
Dear Idwer,
Just built checkout from svn. It outputs this result:
Again: DO NOT REBOOT OR POWEROFF YOUR LAPTOP.I'
...
flashrom v0.9.3-r1288 on Linux 2.6.35-28-generic (i686), built with libpci
3.1.7, GCC 4.4.5, little endian
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... delay loop is unreliable, trying to continue OK.
Found chipset "Intel ICH4-M", enabling flash write... OK.
This chipset supports the following protocols: FWH.
Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000.
Flash image seems to be a legacy BIOS. Disabling checks.
Erasing and writing flash chip... ERASE FAILED at 0x00016000! Expected=0xff,
Read=0xae, failed byte count from 0x00016000-0x00016fff: 0xfde
ERASE FAILED!
ERASE FAILED at 0x00010000! Expected=0xff, Read=0xca, failed byte count from
0x00010000-0x0001ffff: 0xfeb2
ERASE FAILED!
Segmentatiefout
Segmentatiefout=segmentation error
flashrom should NOT have segfaulted. Can you show the last lines of
dmesg (dmesg | tail) ?
...
Maybe this information can help you?
Regards,
Cyrille Bartholomée | De Damhouderestraat 20 | 2018 Antwerpen
t. 0032 3 298 4244 | m. 0032 499 711 018 | e. cyrille@bartholomee.com
Op dinsdag 19 april 2011 07:25:59 schreef Cyrille Bartholomée:
...
Dear Idwer,
...
...
...
First of all thank you for responding so fast and trying to help me!
...
...

Downloaded and built latest flashrom. Problem remains exactly the same

as with previous version.
...

I am using an Asus laptop model M6Ne, the exact type of board I don't

know.
...

I have run the commands you mentioned, the results are attached to this

mail.
...
...
If there is more information you need, please let me know.
...
...
Again, thanks for your help.
...
...
...
Kind regards,
...
...
Cyrille Bartholomée | De Damhouderestraat 20 | 2018 Antwerpen
...
t. 0032 3 298 4244 | m. 0032 499 711 018 | e. cyrille@bartholomee.com
...
...
Op dinsdag 19 april 2011 00:21:28 schreef u:
...
...
2011/4/18 Cyrille Bartholomée cyrille@bartholomee.com:
...
...
...
Dear,
...
...
...
...
...
...
I'm facing this problem when flashing my rom:
...
...
...
...
...
...
flashrom v0.9.2-r1028 on Linux 2.6.35-28-generic (i686), built with
libpci
...
...
...
3.0.0, GCC 4.4.4, little endian
...
...
...
...
...
...
flashrom is free software, get the source code at
http://www.flashrom.org
...
...
...
...
...
...
Calibrating delay loop... delay loop is unreliable, trying to continue
OK.
...
...
...
...
...
...
No coreboot table found.
...
...
...
...
...
...
Found chipset "Intel ICH4-M", enabling flash write... OK.
...
...
...
...
...
...
This chipset supports the following protocols: Non-SPI.
...
...
...
...
...
...
Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address
0xfff80000.
...
...
...
...
...
...
Flash image seems to be a legacy BIOS. Disabling checks.
...
...
...
...
...
...
Writing flash chip... Erasing flash chip... ERASE FAILED at
0x00000008!
...
...
...
Expected=0xff, Read=0x00, failed byte count from
0x00000000-0x00000fff:
...
...
...
0xfc5
...
...
...
...
...
...
ERASE FAILED!
...
...
...
...
...
...
ERASE FAILED at 0x00000008! Expected=0xff, Read=0x00, failed byte
count from
...
...
...
0x00000000-0x0000ffff: 0xfadb
...
...
...
...
...
...
ERASE FAILED!
...
...
...
...
...
...
FAILED!
...
...
...
...
...
...
ERASE FAILED!
...
...
...
...
...
...
FAILED!
...
...
...
...
...
...
Your flash chip is in an unknown state.
...
...
...
...
...
...
Get help on IRC at irc.freenode.net (channel #flashrom) or
...
...
...
...
...
...
mail flashrom@flashrom.org!
...
...
...
...
Can you:
...
...

try a newer release (or build the latest developemt code yourself

...
...
http://www.flashrom.org/Downloads#Installation_from_source)
...
...

mention the exact name of your board (including revision, if there

...
...
are multiple revisions)
...
...

attach the output of 'flashrom -V', 'lspci -nnvvvxxx', 'superiotool

...
...
-deV' (run all commands as root)
...
...
...
...
...
...
Thanks in advance,
...
...
Idwer
...
...
...
...
...
...
...
...

...
...
...
...
...
...
DO NOT REBOOT OR POWEROFF!
...
...
...
...
...
...
Regards,
...
...
...
...
...
...
Cyrille Bartholomée | De Damhouderestraat 20 | 2018 Antwerpen
...
...
...
...
...
...
t. 0032 3 298 4244 | m. 0032 499 711 018 | e. cyrille@bartholomee.com
...
...
...
...
...
...

...
...
...
flashrom mailing list
...
...
...
flashrom@flashrom.org
...
...
...
http://www.flashrom.org/mailman/listinfo/flashrom
...
...
...
...
...
...

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

Re: [flashrom] Help: trouble when flashing rom