Sorry for not using "reply to all.
I've attached the output of dmesg to this mail.
Hope you can help me further on this issue.
Kind regards,
Cyrille Bartholomée | De Damhouderestraat 20 | 2018 Antwerpen
t. 0032 3 298 4244 | m. 0032 499 711 018 | e. cyrille@bartholomee.com
Op dinsdag 19 april 2011 12:29:22 schreef Idwer Vollering:
> Please use "reply to all" in the future. Thanks.
>
> 2011/4/19 Cyrille Bartholomée <cyrille@bartholomee.com>:
> > Dear Idwer,
> >
> > Just built checkout from svn. It outputs this result:
>
> Again: DO NOT REBOOT OR POWEROFF YOUR LAPTOP.I'
>
> >
> > flashrom v0.9.3-r1288 on Linux 2.6.35-28-generic (i686), built with libpci
> > 3.1.7, GCC 4.4.5, little endian
> >
> > flashrom is free software, get the source code at http://www.flashrom.org
> >
> > Calibrating delay loop... delay loop is unreliable, trying to continue OK.
> >
> > Found chipset "Intel ICH4-M", enabling flash write... OK.
> >
> > This chipset supports the following protocols: FWH.
> >
> > Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000.
> >
> > Flash image seems to be a legacy BIOS. Disabling checks.
> >
> > Erasing and writing flash chip... ERASE FAILED at 0x00016000! Expected=0xff,
> > Read=0xae, failed byte count from 0x00016000-0x00016fff: 0xfde
> >
> > ERASE FAILED!
> >
> > ERASE FAILED at 0x00010000! Expected=0xff, Read=0xca, failed byte count from
> > 0x00010000-0x0001ffff: 0xfeb2
> >
> > ERASE FAILED!
> >
> > Segmentatiefout
> >
> > Segmentatiefout=segmentation error
>
> flashrom should NOT have segfaulted. Can you show the last lines of
> dmesg (dmesg | tail) ?
>
> >
> > Maybe this information can help you?
> >
> > Regards,
> >
> > Cyrille Bartholomée | De Damhouderestraat 20 | 2018 Antwerpen
> >
> > t. 0032 3 298 4244 | m. 0032 499 711 018 | e. cyrille@bartholomee.com
> >
> > Op dinsdag 19 april 2011 07:25:59 schreef Cyrille Bartholomée:
> >
> >> Dear Idwer,
> >
> >>
> >
> >>
> >
> >> First of all thank you for responding so fast and trying to help me!
> >
> >>
> >
> >> 1. Downloaded and built latest flashrom. Problem remains exactly the same
> >> as with previous version.
> >
> >> 2. I am using an Asus laptop model M6Ne, the exact type of board I don't
> >> know.
> >
> >> 3. I have run the commands you mentioned, the results are attached to this
> >> mail.
> >
> >>
> >
> >> If there is more information you need, please let me know.
> >
> >>
> >
> >> Again, thanks for your help.
> >
> >>
> >
> >>
> >
> >> Kind regards,
> >
> >>
> >
> >> Cyrille Bartholomée | De Damhouderestraat 20 | 2018 Antwerpen
> >
> >> t. 0032 3 298 4244 | m. 0032 499 711 018 | e. cyrille@bartholomee.com
> >
> >>
> >
> >> Op dinsdag 19 april 2011 00:21:28 schreef u:
> >
> >> > 2011/4/18 Cyrille Bartholomée <cyrille@bartholomee.com>:
> >
> >> > > Dear,
> >
> >> > >
> >
> >> > > I'm facing this problem when flashing my rom:
> >
> >> > >
> >
> >> > > flashrom v0.9.2-r1028 on Linux 2.6.35-28-generic (i686), built with
> >> > > libpci
> >
> >> > > 3.0.0, GCC 4.4.4, little endian
> >
> >> > >
> >
> >> > > flashrom is free software, get the source code at
> >> > > http://www.flashrom.org
> >
> >> > >
> >
> >> > > Calibrating delay loop... delay loop is unreliable, trying to continue
> >> > > OK.
> >
> >> > >
> >
> >> > > No coreboot table found.
> >
> >> > >
> >
> >> > > Found chipset "Intel ICH4-M", enabling flash write... OK.
> >
> >> > >
> >
> >> > > This chipset supports the following protocols: Non-SPI.
> >
> >> > >
> >
> >> > > Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address
> >> > > 0xfff80000.
> >
> >> > >
> >
> >> > > Flash image seems to be a legacy BIOS. Disabling checks.
> >
> >> > >
> >
> >> > > Writing flash chip... Erasing flash chip... ERASE FAILED at
> >> > > 0x00000008!
> >
> >> > > Expected=0xff, Read=0x00, failed byte count from
> >> > > 0x00000000-0x00000fff:
> >
> >> > > 0xfc5
> >
> >> > >
> >
> >> > > ERASE FAILED!
> >
> >> > >
> >
> >> > > ERASE FAILED at 0x00000008! Expected=0xff, Read=0x00, failed byte
> >> > > count from
> >
> >> > > 0x00000000-0x0000ffff: 0xfadb
> >
> >> > >
> >
> >> > > ERASE FAILED!
> >
> >> > >
> >
> >> > > FAILED!
> >
> >> > >
> >
> >> > > ERASE FAILED!
> >
> >> > >
> >
> >> > > FAILED!
> >
> >> > >
> >
> >> > > Your flash chip is in an unknown state.
> >
> >> > >
> >
> >> > > Get help on IRC at irc.freenode.net (channel #flashrom) or
> >
> >> > >
> >
> >> > > mail flashrom@flashrom.org!
> >
> >> >
> >
> >> > Can you:
> >
> >> > - try a newer release (or build the latest developemt code yourself
> >
> >> > http://www.flashrom.org/Downloads#Installation_from_source)
> >
> >> > - mention the exact name of your board (including revision, if there
> >
> >> > are multiple revisions)
> >
> >> > - attach the output of 'flashrom -V', 'lspci -nnvvvxxx', 'superiotool
> >
> >> > -deV' (run all commands as root)
> >
> >> >
> >
> >> >
> >
> >> > Thanks in advance,
> >
> >> > Idwer
> >
> >> >
> >
> >> > >
> >
> >> > >
> >> > > -------------------------------------------------------------------------------
> >
> >> > >
> >
> >> > > DO NOT REBOOT OR POWEROFF!
> >
> >> > >
> >
> >> > > Regards,
> >
> >> > >
> >
> >> > > Cyrille Bartholomée | De Damhouderestraat 20 | 2018 Antwerpen
> >
> >> > >
> >
> >> > > t. 0032 3 298 4244 | m. 0032 499 711 018 | e. cyrille@bartholomee.com
> >
> >> > >
> >
> >> > > _______________________________________________
> >
> >> > > flashrom mailing list
> >
> >> > > flashrom@flashrom.org
> >
> >> > > http://www.flashrom.org/mailman/listinfo/flashrom
> >
> >> > >
> >
> >> >
> >
> >>
>