Hi, I am trying to patch my BIOS. To do so, I am trying to flash a patched image of my BIOS. Unfortunaltely, when I flash the image, I keep having the same error :
Verifying flash... FAILED at 0x00000010! Expected=0x5a, Found=0xff, failed byte count from 0x00000000-0x00ffffff: 0xa81085 Your flash chip is in an unknown state.
WP and HOLD are linked to 3.3V (as mentionned in the W25Q128 datasheethttps://www.mouser.fr/datasheet/2/949/w25q128jv_revf_03272018_plus-1489608.pdf#%5B%7B%22num%22%3A194%2C%22gen%22%3A0%7D%2C%7B%22name%22%3A%22XYZ%22%7D%2C69%2C364%2C0%5D)
I saw this mail archivehttps://www.mail-archive.com/flashrom@flashrom.org/msg14880.html where Shane has the exact same problem. Therefore, I believe I have a write protection problem (as I always have the same error byte at the same address).
Shane solved his problem using the flashrom GUI. I know it is not maintained anymore, but I can't even find an archive. Do you know where I could find one ?
Also, I see in the datasheet that I can send specific instructions to my EEPROM. I believe flashrom sends automatically these instructions, but is there a way for me to check that my chip is not stuck in readonly for example ?
Cordialy, Quentin Kaufman
Restricted
This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you.
Restricted