flashrom

flashrom@flashrom.org

5 participants
9161 discussions

flashrom v1.0 on Linux 4.20.3-gentoo (x86_64) with ch341a and GigaDevice GD25Q40(B)
by Néstor A. Marchesini 23 Jan '19

23 Jan '19

-------------------------------------------------------------------------------- Read 1 original memory. $ time flashrom --programmer ch341a_spi --chip "GD25Q40(B)" --read SAMSUNG-LS23C350H-00-original-GD25Q40B.bin -V flashrom v1.0 on Linux 4.20.3-gentoo (x86_64) flashrom is free software, get the source code at https://flashrom.org flashrom was built with libpci 3.6.2, GCC 8.2.0, little endian Command line (7 args): flashrom --programmer ch341a_spi --chip GD25Q40(B) --read SAMSUNG-LS23C350H-00-original-GD25Q40B.bin -V Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Initializing ch341a_spi programmer Device revision is 3.0.4 The following protocols are supported: SPI. Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4013 Found GigaDevice flash chip "GD25Q40(B)" (512 kB, SPI) on ch341a_spi. Chip status register is 0x00. Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set Chip status register: Block Protect 4 (BP4) is not set Chip status register: Block Protect 3 (BP3) is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention which mainboard or programmer you tested in the subject line. Thanks for your help! Reading flash... done. real 0m4,524s user 0m0,191s sys 0m0,006s -------------------------------------------------------------------------------- Read 2 original memory. $ time flashrom --programmer ch341a_spi --chip "GD25Q40(B)" --read SAMSUNG-LS23C350H-01-original-GD25Q40B.bin -V flashrom v1.0 on Linux 4.20.3-gentoo (x86_64) flashrom is free software, get the source code at https://flashrom.org flashrom was built with libpci 3.6.2, GCC 8.2.0, little endian Command line (7 args): flashrom --programmer ch341a_spi --chip GD25Q40(B) --read SAMSUNG-LS23C350H-01-original-GD25Q40B.bin -V Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Initializing ch341a_spi programmer Device revision is 3.0.4 The following protocols are supported: SPI. Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0xc8, id2 0x4013 Found GigaDevice flash chip "GD25Q40(B)" (512 kB, SPI) on ch341a_spi. Chip status register is 0x00. Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set Chip status register: Block Protect 4 (BP4) is not set Chip status register: Block Protect 3 (BP3) is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention which mainboard or programmer you tested in the subject line. Thanks for your help! Reading flash... done. real 0m4,542s user 0m0,187s sys 0m0,006s -------------------------------------------------------------------------------- List and compare the two reads. $ ls -l SAMSUNG-LS23C350H-0?-original-GD25Q40B.bin -rw-r--r-- 1 nestor nestor 524288 ene 23 03:38 SAMSUNG-LS23C350H-00-original-GD25Q40B.bin -rw-r--r-- 1 nestor nestor 524288 ene 23 03:40 SAMSUNG-LS23C350H-01-original-GD25Q40B.bin $ ls -lh SAMSUNG-LS23C350H-0?-original-GD25Q40B.bin -rw-r--r-- 1 nestor nestor 512K ene 23 03:38 SAMSUNG-LS23C350H-00-original-GD25Q40B.bin -rw-r--r-- 1 nestor nestor 512K ene 23 03:40 SAMSUNG-LS23C350H-01-original-GD25Q40B.bin $ cmp SAMSUNG-LS23C350H-00-original-GD25Q40B.bin SAMSUNG-LS23C350H-01-original-GD25Q40B.bin -b All ok, the compare are equals. $ eix -I flashrom [I] sys-apps/flashrom Available versions: 0.9.6.1 0.9.7 0.9.8 (~)0.9.9 (~)1.0 **9999 {atahpt +atapromise +atavia +bitbang_spi +buspirate_spi +ch341a_spi (+)dediprog +developerbox_spi +digilent_spi doc +drkaiser +dummy (+)ft2232_spi +gfxnvidia +internal +internal_dmi +it8212 +linux_mtd +linux_spi mstarddc_spi +nic3com +nicintel +nicintel_eeprom +nicintel_spi nicnatsemi (+)nicrealtek +ogp_spi +pickit2_spi +pony_spi (+)rayer_spi (+)satamv +satasii +serprog static tools usbblaster +usbblaster_spi +wiki} Installed versions: 1.0(03:41:50 07/11/18)(buspirate_spi ch341a_spi dummy ft2232_spi internal internal_dmi linux_spi pickit2_spi pony_spi serprog tools wiki -atahpt -atapromise -atavia -dediprog -drkaiser -gfxnvidia -it8212 -mstarddc_spi -nic3com -nicintel -nicintel_eeprom -nicintel_spi -nicnatsemi -nicrealtek -ogp_spi -rayer_spi -satamv -satasii -static -usbblaster_spi) Homepage: https://flashrom.org/ Description: Utility for reading, writing, erasing and verifying flash ROM chips I'am gentoo testing branck ~amd64 and I have ch341a and buspirate 3.5c, my motherboard is Gigabyte GA-990FXA-UD7 r1.00 with AMD FX8350 processor. Regards and thaks for make flashrom great!

1 0

ENE KB9012QF A3 reflash help needed
by Nyúlós Lónyál 20 Jan '19

20 Jan '19

Hi! I'm trying to flash an ENE KB9012QF A3 KBC on LA-8241P motherboard. The problem is flashrom can't detect the internal SPI of it, fails with error. flashrom p1.0-141-g9cecc7e on Linux 4.15.0-20-generic (x86_64) flashrom is free software, get the source code at https://flashrom.org flashrom was built with libpci 3.5.2, GCC 7.3.0, little endian Command line (5 args): ./flashrom -p rayer_spi -c KB9012 (EDI) -V Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns). Initializing rayer_spi programmer Using address 0x378 as I/O base for parallel port access. Using RayeR SPIPGM pinout. The following protocols are supported: SPI. Probing for ENE KB9012 (EDI), 128 kB: edi_chip_probe: reading hwversion failed No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. How to get it working? Thanks a lot for help!

4 19

Found chipset "VIA VT82C597" with PCI ID 1106:0597. Works
by William Smart 18 Jan '19

18 Jan '19

Greetings Flashrom Crew! Found chipset "VIA VT82C597" with PCI ID 1106:0597. I was able to flash a bios on this chipset, using an EPOX EP-MVM3G2 mainboard, verbose log attached. Thanks!!! Bill

1 0

Thomas-Krenn-Award 2019 - Win server hardware for Open Source Projects
by Thomas Niedermeier 18 Jan '19

18 Jan '19

Dear Ladies and Gentlemen, I hope you had a good start into the new year. Since you have already successfully applied for the Thomas-Krenn-Award with your project Flashrom, I would like to draw your attention to this year's award. Open source projects can again win server hardware with a total value of 6,500 Euros. The submission of a project is very easy - you select three configurations (1500 €, 2000 € and 3000 € net value of goods) and send an e-mail to award(a)thomas-krenn.com with a description for what purpose the server would be used in the project. All details can be found below: https://www.thomas-krenn.com/en/companies/about-us/thomas-krenn-award.html We at Thomas-Krenn would be delighted if you and your project could participate in our award again. You can also forward the information to other developers in the open source community (one submission per project is possible. There is also no registered association required to submit the project.) The registration deadline is 27.01.2019. Best regards, Thomas Niedermeier Thomas Niedermeier Knowledge Transfer E-Mail: tniedermeier(a)thomas-krenn.com Tel: +49 8551 91 50 264 [Lassen Sie sich zu Windows Server 2019 beraten]<https://www.thomas-krenn.com/de/produkte/software/microsoft-software/window…> Thomas-Krenn.AG; Speltenbach-Steinäcker 1; 94078 Freyung; Sitz der Gesellschaft: Freyung | HRB 6790; Vorstand: Ralf Hohmann, Christoph Maier; AR-Vorsitzender: Guido Bollue [Xing]<https://www.xing.com/companies/thomas-krenn.ag> [Facebook] <https://www.facebook.com/thomaskrenn.ag> [Twitter] <https://twitter.com/thomaskrennag> [LinkedIn] <https://de.linkedin.com/company/thomas-krenn.ag>

1 0

AsRock Z370 Extreme4 not supported
by flashrom＠prvy.eu 18 Jan '19

18 Jan '19

1 0

patch for allowing the use of the SOCKET target of the SF600
by Florian Kaiser 15 Jan '19

15 Jan '19

Hello, I am using this patch for a while now and I did not encounter any problems. I am not sure if this was/is not supported. Is there any reason why this is not supported? Thank you very much, Florian Kaiser

4 3

patch: add support for the MCP2210
by Máté Kukri 12 Jan '19

12 Jan '19

Hello, This patch adds support for the MCP2210 USB to SPI bridge as a programmer. Since the MCP2210 is an HID device I have a working version using both libusb and hidraw + udev for finding the device. I have already made a github pull request with more details: https://github.com/flashrom/flashrom/pull/68. But I am posting it here as well. Máté Kukri

1 0

Atmel AT49F002(N)T erase and write (was:asus p2b - successful erase and write)
by Branden Waldner 12 Jan '19

12 Jan '19

I realized I mixed up the flash part status with the motherboard, so figured I'd better make that clear. Sorry about that. On 1/4/19, Branden Waldner <scruffy99(a)gmail.com> wrote: > I got an asus p2b to go with my asus p2-99 for coreboot testing and it > works with flashrom. > > Erase and write are reported as untested, so attached are logs of > flashing from the award bios and from coreboot. It reports failure > when trying erase function 0, but tries erase function 1 and works. It > also requires the this_is_not_a_laptop option to work with the award > bios. > > I can do any further testing or supply logs if required. >

1 0

Is it possible to change only DMI data using flashrom ?
by Марк Коренберг 08 Jan '19

08 Jan '19

I want to change, say, serial number of motherboard. -- Segmentation fault

2 1

Help with a Winbond W25Q16
by iafdan 08 Jan '19

08 Jan '19

Hi to the cool guys from Flashrom! I'm trying to dump the contents of a Winbond W25Q16 using the command: ./flashrom -p ft2232_spi:type=232H,port=A -c W25Q16 -r dump.rom I'm getting an error that: This flash part has status NOT WORKING for operations... However, when I do "flashrom -L" the W25Q16 chip, with the exact same ID appears on the list. Here's a verbose output: https://paste.flashrom.org/view.php?id=3163 I also tried reading the chip without specifying the exact chip. Many thanks!!

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom