flashrom

flashrom@flashrom.org

5 participants
9154 discussions

SUCCESS: AsRock K8S8X, SuperI/O not detected however
by Adrian Glaubitz 16 Nov '09

16 Nov '09

Hello, I successfully flashed a new BIOS version onto an AsRock K8S8X. Used flashrom r764. flashrom did not detect the SuperI/O though. Chipset is SiS 755. The board works absolutely fine and there were NO issues during flash, worked like a charm :). Please see the attached logs and mark the board as *supported*. Thanks, Adrian

1 0

[PATCH] Show ICH flash descriptor info only if valid
by Carl-Daniel Hailfinger 16 Nov '09

16 Nov '09

Show ICH flash descriptor info only if valid. Otherwise it is just confusing the developers. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-ich_spi_descriptor/chipset_enable.c =================================================================== --- flashrom-ich_spi_descriptor/chipset_enable.c (Revision 764) +++ flashrom-ich_spi_descriptor/chipset_enable.c (Arbeitskopie) @@ -426,7 +426,7 @@ static int enable_flash_ich_dc_spi(struct pci_dev *dev, const char *name, int ich_generation) { - int ret, i; + int ret, i, hwseq = 0; uint8_t old, new, bbs, buc; uint16_t spibar_offset, tmp2; uint32_t tmp, gcs; @@ -540,30 +540,50 @@ printf_debug("0x04: 0x%04x (HSFS)\n", tmp2); printf_debug("FLOCKDN %i, ", (tmp2 >> 15 & 1)); printf_debug("FDV %i, ", (tmp2 >> 14) & 1); + /* Flash Descriptor Override Pin-Strap Status, but unfortunately + * there is no info on how it affects hardware sequencing if + * FDV=1, nor do we know whether FDOPSS needs to be ORed or + * XORed with FDV. + */ printf_debug("FDOPSS %i, ", (tmp2 >> 13) & 1); printf_debug("SCIP %i, ", (tmp2 >> 5) & 1); printf_debug("BERASE %i, ", (tmp2 >> 3) & 3); printf_debug("AEL %i, ", (tmp2 >> 2) & 1); printf_debug("FCERR %i, ", (tmp2 >> 1) & 1); printf_debug("FDONE %i\n", (tmp2 >> 0) & 1); + /* If the flash descriptor is valid, hardware sequencing is + * supported and software sequencing may encounter transaction + * errors if it tries to access regions outside the BIOS area. + * See the FDOPSS note above for potential pitfalls. + */ + hwseq = (tmp2 >> 14) & 1; + if (hwseq) { + tmp = mmio_readl(spibar + 0x0); + printf("WARNING: SPI descriptor mode is active, " + "flashing may fail in some regions.\n"); + printf_debug("0x00: 0x%08x (BPFR)\n", tmp); + printf_debug("PRB 0x%x, ", (tmp & 0x1FFF) << 12); + tmp >>= 16; + printf_debug("PRL 0x%x, ", (tmp & 0x1FFF) << 12); - tmp = mmio_readl(spibar + 0x50); - printf_debug("0x50: 0x%08x (FRAP)\n", tmp); - printf_debug("BMWAG %i, ", (tmp >> 24) & 0xff); - printf_debug("BMRAG %i, ", (tmp >> 16) & 0xff); - printf_debug("BRWA %i, ", (tmp >> 8) & 0xff); - printf_debug("BRRA %i\n", (tmp >> 0) & 0xff); + tmp = mmio_readl(spibar + 0x50); + printf_debug("0x50: 0x%08x (FRAP)\n", tmp); + printf_debug("BMWAG %i, ", (tmp >> 24) & 0xff); + printf_debug("BMRAG %i, ", (tmp >> 16) & 0xff); + printf_debug("BRWA %i, ", (tmp >> 8) & 0xff); + printf_debug("BRRA %i\n", (tmp >> 0) & 0xff); - printf_debug("0x54: 0x%08x (FREG0)\n", - mmio_readl(spibar + 0x54)); - printf_debug("0x58: 0x%08x (FREG1)\n", - mmio_readl(spibar + 0x58)); - printf_debug("0x5C: 0x%08x (FREG2)\n", - mmio_readl(spibar + 0x5C)); - printf_debug("0x60: 0x%08x (FREG3)\n", - mmio_readl(spibar + 0x60)); - printf_debug("0x64: 0x%08x (FREG4)\n", - mmio_readl(spibar + 0x64)); + printf_debug("0x54: 0x%08x (FREG0)\n", + mmio_readl(spibar + 0x54)); + printf_debug("0x58: 0x%08x (FREG1)\n", + mmio_readl(spibar + 0x58)); + printf_debug("0x5C: 0x%08x (FREG2)\n", + mmio_readl(spibar + 0x5C)); + printf_debug("0x60: 0x%08x (FREG3)\n", + mmio_readl(spibar + 0x60)); + printf_debug("0x64: 0x%08x (FREG4)\n", + mmio_readl(spibar + 0x64)); + } printf_debug("0x74: 0x%08x (PR0)\n", mmio_readl(spibar + 0x74)); printf_debug("0x78: 0x%08x (PR1)\n", @@ -586,8 +606,10 @@ mmio_readl(spibar + 0x9C)); printf_debug("0xA0: 0x%08x (BBAR)\n", mmio_readl(spibar + 0xA0)); - printf_debug("0xB0: 0x%08x (FDOC)\n", - mmio_readl(spibar + 0xB0)); + if (hwseq) { + printf_debug("0xB0: 0x%08x (FDOC)\n", + mmio_readl(spibar + 0xB0)); + } if (tmp2 & (1 << 15)) { printf("WARNING: SPI Configuration Lockdown activated.\n"); ichspi_lock = 1; -- Developer quote of the week: "We are juggling too many chainsaws and flaming arrows and tigers."

1 1

[commit] r764 - trunk
by svn＠flashrom.org 16 Nov '09

16 Nov '09

Author: hailfinger Date: 2009-11-16 16:03:35 +0100 (Mon, 16 Nov 2009) New Revision: 764 Modified: trunk/spi.c Log: If a SPI command taking an address does fail, we want to know the address for easier debugging. Vincent wrote: This patch provided help to debug the partial write on ICH in descriptor mode. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Vincent S. Cojot <openlook(a)cojot.name> Modified: trunk/spi.c =================================================================== --- trunk/spi.c 2009-11-16 14:13:09 UTC (rev 763) +++ trunk/spi.c 2009-11-16 15:03:35 UTC (rev 764) @@ -615,8 +615,8 @@ result = spi_send_multicommand(cmds); if (result) { - fprintf(stderr, "%s failed during command execution\n", - __func__); + fprintf(stderr, "%s failed during command execution at address 0x%x\n", + __func__, addr); return result; } /* Wait until the Write-In-Progress bit is cleared. @@ -659,7 +659,8 @@ result = spi_send_multicommand(cmds); if (result) { - fprintf(stderr, "%s failed during command execution\n", __func__); + fprintf(stderr, "%s failed during command execution at address 0x%x\n", + __func__, addr); return result; } /* Wait until the Write-In-Progress bit is cleared. @@ -721,8 +722,8 @@ result = spi_send_multicommand(cmds); if (result) { - fprintf(stderr, "%s failed during command execution\n", - __func__); + fprintf(stderr, "%s failed during command execution at address 0x%x\n", + __func__, addr); return result; } /* Wait until the Write-In-Progress bit is cleared. @@ -827,21 +828,21 @@ result = spi_send_multicommand(cmds); if (result) { - fprintf(stderr, "%s failed during command execution\n", - __func__); + fprintf(stderr, "%s failed during command execution at address 0x%x\n", + __func__, addr); } return result; } -int spi_nbyte_program(int address, uint8_t *bytes, int len) +int spi_nbyte_program(int addr, uint8_t *bytes, int len) { int result; /* FIXME: Switch to malloc based on len unless that kills speed. */ unsigned char cmd[JEDEC_BYTE_PROGRAM_OUTSIZE - 1 + 256] = { JEDEC_BYTE_PROGRAM, - (address >> 16) & 0xff, - (address >> 8) & 0xff, - (address >> 0) & 0xff, + (addr >> 16) & 0xff, + (addr >> 8) & 0xff, + (addr >> 0) & 0xff, }; struct spi_command cmds[] = { { @@ -874,8 +875,8 @@ result = spi_send_multicommand(cmds); if (result) { - fprintf(stderr, "%s failed during command execution\n", - __func__); + fprintf(stderr, "%s failed during command execution at address 0x%x\n", + __func__, addr); } return result; }

1 0

Re: [flashrom] [PATCH] More verbose failures for SPI commands
by Carl-Daniel Hailfinger 16 Nov '09

16 Nov '09

Hi Vincent, On 16.11.2009 16:00, vincent(a)cojot.name wrote: > This patch provided help to debug the issue.. > Acked-by: Vincent S. Cojot <openlook(a)cojot.name> thanks for testing. Committed in r764. Regards, Carl-Daniel -- Developer quote of the week: "We are juggling too many chainsaws and flaming arrows and tigers."

1 0

[PATCH] More verbose failures for SPI commands
by Carl-Daniel Hailfinger 16 Nov '09

16 Nov '09

If a SPI command taking an address does fail, we want to know the address for easier debugging. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-spi_command_failure_verbose/spi.c =================================================================== --- flashrom-spi_command_failure_verbose/spi.c (Revision 763) +++ flashrom-spi_command_failure_verbose/spi.c (Arbeitskopie) @@ -615,8 +615,8 @@ result = spi_send_multicommand(cmds); if (result) { - fprintf(stderr, "%s failed during command execution\n", - __func__); + fprintf(stderr, "%s failed during command execution at address 0x%x\n", + __func__, addr); return result; } /* Wait until the Write-In-Progress bit is cleared. @@ -659,7 +659,8 @@ result = spi_send_multicommand(cmds); if (result) { - fprintf(stderr, "%s failed during command execution\n", __func__); + fprintf(stderr, "%s failed during command execution at address 0x%x\n", + __func__, addr); return result; } /* Wait until the Write-In-Progress bit is cleared. @@ -721,8 +722,8 @@ result = spi_send_multicommand(cmds); if (result) { - fprintf(stderr, "%s failed during command execution\n", - __func__); + fprintf(stderr, "%s failed during command execution at address 0x%x\n", + __func__, addr); return result; } /* Wait until the Write-In-Progress bit is cleared. @@ -827,21 +828,21 @@ result = spi_send_multicommand(cmds); if (result) { - fprintf(stderr, "%s failed during command execution\n", - __func__); + fprintf(stderr, "%s failed during command execution at address 0x%x\n", + __func__, addr); } return result; } -int spi_nbyte_program(int address, uint8_t *bytes, int len) +int spi_nbyte_program(int addr, uint8_t *bytes, int len) { int result; /* FIXME: Switch to malloc based on len unless that kills speed. */ unsigned char cmd[JEDEC_BYTE_PROGRAM_OUTSIZE - 1 + 256] = { JEDEC_BYTE_PROGRAM, - (address >> 16) & 0xff, - (address >> 8) & 0xff, - (address >> 0) & 0xff, + (addr >> 16) & 0xff, + (addr >> 8) & 0xff, + (addr >> 0) & 0xff, }; struct spi_command cmds[] = { { @@ -874,8 +875,8 @@ result = spi_send_multicommand(cmds); if (result) { - fprintf(stderr, "%s failed during command execution\n", - __func__); + fprintf(stderr, "%s failed during command execution at address 0x%x\n", + __func__, addr); } return result; } -- Developer quote of the week: "We are juggling too many chainsaws and flaming arrows and tigers."

2 1

[commit] r763 - trunk
by svn＠flashrom.org 16 Nov '09

16 Nov '09

Author: hailfinger Date: 2009-11-16 15:13:09 +0100 (Mon, 16 Nov 2009) New Revision: 763 Modified: trunk/print_wiki.c Log: Add URLs for boards ASUS K8V, ASUS K8V SE Deluxe, Elitegroup K7S5A. Add a note for ASUS M2N-E. Change "iff" to "if". Most people don't understand what "iff" means and the meaning of both words is close enough to hopefully give users the right idea. Signed-off-by: Idwer Vollering <vidwer(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/print_wiki.c =================================================================== --- trunk/print_wiki.c 2009-11-16 14:05:13 UTC (rev 762) +++ trunk/print_wiki.c 2009-11-16 14:13:09 UTC (rev 763) @@ -115,6 +115,8 @@ { "ASUS", "A8V Deluxe", "http://www.asus.com/product.aspx?P_ID=tvpdgPNCPaABZRVU" }, { "ASUS", "A8V-E Deluxe", "http://www.asus.com.tw/products.aspx?l1=3&l2=15&l3=143&l4=0&model=376&model…" }, { "ASUS", "A8V-E SE", "http://www.asus.com.tw/products.aspx?l1=3&l2=15&l3=143&l4=0&model=576&model…" }, + { "ASUS", "K8V", "http://www.asus.com/product.aspx?P_ID=fG2KZOWF7v6MRFRm" }, + { "ASUS", "K8V SE Deluxe", "http://www.asus.com/product.aspx?P_ID=65HeDI8XM1u6Uy6o" }, { "ASUS", "M2A-MX", "http://www.asus.com/products.aspx?l1=3&l2=101&l3=583&l4=0&model=1909&modelm…" }, { "ASUS", "M2A-VM", "http://www.asus.com.tw/products.aspx?l1=3&l2=101&l3=496&l4=0&model=1568&mod…" }, { "ASUS", "M2N-E", "http://www.asus.com/products.aspx?l1=3&l2=101&l3=308&l4=0&model=1181&modelm…" }, @@ -131,6 +133,7 @@ { "ASUS", "P6T Deluxe V2", "http://www.asus.com/product.aspx?P_ID=iRlP8RG9han6saZx" }, { "A-Trend", "ATC-6220", "http://www.motherboard.cz/mb/atrend/atc6220.htm" }, { "BCOM", "WinNET100", "http://www.coreboot.org/BCOM_WINNET100" }, + { "Elitegroup", "K7S5A", "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=279&…" }, { "Elitegroup", "P6VAP-A+", "http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=117&…" }, { "GIGABYTE", "GA-6BXC", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ClassVal…" }, { "GIGABYTE", "GA-6BXDU", "http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductI…" }, @@ -282,7 +285,8 @@ { "ASUS", "A8V-E SE", "See http://www.coreboot.org/pipermail/coreboot/2007-October/026496.html." }, { "ASUS", "M2A-VM", "See http://www.coreboot.org/pipermail/coreboot/2007-September/025281.html." }, { "BCOM", "WinNET100", "Used in the IGEL-316 thin client." }, - { "GIGABYTE", "GA-7ZM", "Works fine iff you remove jumper JP9 on the board and disable the flash protection BIOS option." }, + { "GIGABYTE", "GA-7ZM", "Works fine if you remove jumper JP9 on the board and disable the flash protection BIOS option." }, + { "ASUS", "M2N-E", "If the machine doesn't come up again after flashing, try resetting the NVRAM(CMOS). The MAC address of the onboard network card will change to the value stored in the new image, so backup the old address first. See http://www.flashrom.org/pipermail/flashrom/2009-November/000879.html" }, /* Verified working boards that DO need write-enables. */ { "Acer", "Aspire One", "See http://www.coreboot.org/pipermail/coreboot/2009-May/048041.html." },

1 0

[commit] r762 - trunk
by svn＠flashrom.org 16 Nov '09

16 Nov '09

Author: hailfinger Date: 2009-11-16 15:05:13 +0100 (Mon, 16 Nov 2009) New Revision: 762 Modified: trunk/Makefile Log: Retrieve the proper linker flags for libftdi via pkg-config and fall back if pkg-config isn't available or if it doesn't know libftdi. Fix $LIBS and $FEATURE_LIBS to honor dependency order. The original patch is from J?\195?\182rg, it has been updated by Carl-Daniel to work on the current tree and to have a fallback in case pkg-config is not available or not working. Signed-off-by: J?\195?\182rg Mayer <jmayer(a)loplof.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: J?\195?\182rg Mayer <jmayer(a)loplof.de> Modified: trunk/Makefile =================================================================== --- trunk/Makefile 2009-11-15 17:23:59 UTC (rev 761) +++ trunk/Makefile 2009-11-16 14:05:13 UTC (rev 762) @@ -120,10 +120,11 @@ OBJS += satasii.o endif +FTDILIBS := $(shell pkg-config --libs libftdi 2>/dev/null || printf "%s" "-lftdi -lusb") ifeq ($(CONFIG_FT2232SPI), yes) # This is a totally ugly hack. FEATURE_CFLAGS += $(shell LC_ALL=C grep -q "FTDISUPPORT := yes" .features && printf "%s" "-D'FT2232_SPI_SUPPORT=1'") -FEATURE_LIBS += $(shell LC_ALL=C grep -q "FTDISUPPORT := yes" .features && printf "%s" "-lftdi") +FEATURE_LIBS += $(shell LC_ALL=C grep -q "FTDISUPPORT := yes" .features && printf "%s" "$(FTDILIBS)") OBJS += ft2232_spi.o endif @@ -146,7 +147,7 @@ FEATURE_LIBS += $(shell LC_ALL=C grep -q "NEEDLIBZ := yes" .libdeps && printf "%s" "-lz") $(PROGRAM): $(OBJS) - $(CC) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS) $(FEATURE_LIBS) + $(CC) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(FEATURE_LIBS) $(LIBS) # TAROPTIONS reduces information leakage from the packager's system. # If other tar programs support command line arguments for setting uid/gid of @@ -218,7 +219,7 @@ echo "struct ftdi_context *ftdic = NULL;"; \ echo "int main(int argc, char **argv)"; \ echo "{ return ftdi_init(ftdic); }"; ) > .featuretest.c ) - @$(CC) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest $(LIBS) -lftdi >/dev/null 2>&1 && \ + @$(CC) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest $(FTDILIBS) $(LIBS) >/dev/null 2>&1 && \ ( echo "found."; echo "FTDISUPPORT := yes" >> .features.tmp ) || \ ( echo "not found."; echo "FTDISUPPORT := no" >> .features.tmp ) @$(DIFF) -q .features.tmp .features >/dev/null 2>&1 && rm .features.tmp || mv .features.tmp .features

1 0

Fix feature detection when fdti requires libusb for linking
by Joerg Mayer 16 Nov '09

16 Nov '09

see attached patch. patch is too small to be copyrightable... ciao Joerg -- Joerg Mayer <jmayer(a)loplof.de> We are stuck with technology when what we really want is just stuff that works. Some say that should read Microsoft instead of technology.

3 5

[commit] r761 - trunk
by svn＠flashrom.org 15 Nov '09

15 Nov '09

Author: hailfinger Date: 2009-11-15 18:23:59 +0100 (Sun, 15 Nov 2009) New Revision: 761 Modified: trunk/ Log: svn:ignore .libdeps Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Property changes on: trunk ___________________________________________________________________ Modified: svn:ignore - flashrom .features .dependencies + flashrom .features .dependencies .libdeps

1 0

[commit] r760 - trunk
by svn＠flashrom.org 15 Nov '09

15 Nov '09

Author: hailfinger Date: 2009-11-15 18:20:21 +0100 (Sun, 15 Nov 2009) New Revision: 760 Modified: trunk/chipset_enable.c trunk/print.c Log: Mark Elitegroup K7S5A as supported. Mark SiS 735 as supported. Remove "SiS" from the model number to avoid printing it twice. Reported by Adrian Glaubitz. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/chipset_enable.c =================================================================== --- trunk/chipset_enable.c 2009-11-15 17:13:29 UTC (rev 759) +++ trunk/chipset_enable.c 2009-11-15 17:20:21 UTC (rev 760) @@ -1155,34 +1155,34 @@ {0x10de, 0x0366, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* LPC */ {0x10de, 0x0367, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* Pro */ {0x10de, 0x0548, OK, "NVIDIA", "MCP67", enable_flash_mcp55}, - {0x1039, 0x0496, NT, "SiS", "SiS 85C496+497", enable_flash_sis85c496}, - {0x1039, 0x0406, NT, "SiS", "SiS 501/5101/5501", enable_flash_sis501}, - {0x1039, 0x5511, NT, "SiS", "SiS 5511", enable_flash_sis5511}, - {0x1039, 0x5596, NT, "SiS", "SiS 5596", enable_flash_sis5596}, - {0x1039, 0x5571, NT, "SiS", "SiS 5571", enable_flash_sis530}, - {0x1039, 0x5591, NT, "SiS", "SiS 5591/5592", enable_flash_sis530}, - {0x1039, 0x5597, NT, "SiS", "SiS 5597/5598/5581/5120", enable_flash_sis530}, - {0x1039, 0x0530, NT, "SiS", "SiS 530", enable_flash_sis530}, - {0x1039, 0x5600, NT, "SiS", "SiS 600", enable_flash_sis530}, - {0x1039, 0x0620, NT, "SiS", "SiS 620", enable_flash_sis530}, - {0x1039, 0x0540, NT, "SiS", "SiS 540", enable_flash_sis540}, - {0x1039, 0x0630, NT, "SiS", "SiS 630", enable_flash_sis630}, - {0x1039, 0x0635, NT, "SiS", "SiS 635", enable_flash_sis630}, - {0x1039, 0x0640, NT, "SiS", "SiS 640", enable_flash_sis630}, - {0x1039, 0x0645, NT, "SiS", "SiS 645", enable_flash_sis630}, - {0x1039, 0x0646, NT, "SiS", "SiS 645DX", enable_flash_sis630}, - {0x1039, 0x0648, NT, "SiS", "SiS 648", enable_flash_sis630}, - {0x1039, 0x0650, NT, "SiS", "SiS 650", enable_flash_sis630}, - {0x1039, 0x0651, NT, "SiS", "SiS 651", enable_flash_sis630}, - {0x1039, 0x0655, NT, "SiS", "SiS 655", enable_flash_sis630}, - {0x1039, 0x0730, NT, "SiS", "SiS 730", enable_flash_sis630}, - {0x1039, 0x0733, NT, "SiS", "SiS 733", enable_flash_sis630}, - {0x1039, 0x0735, NT, "SiS", "SiS 735", enable_flash_sis630}, - {0x1039, 0x0740, NT, "SiS", "SiS 740", enable_flash_sis630}, - {0x1039, 0x0745, NT, "SiS", "SiS 745", enable_flash_sis630}, - {0x1039, 0x0746, NT, "SiS", "SiS 746", enable_flash_sis630}, - {0x1039, 0x0748, NT, "SiS", "SiS 748", enable_flash_sis630}, - {0x1039, 0x0755, NT, "SiS", "SiS 755", enable_flash_sis630}, + {0x1039, 0x0496, NT, "SiS", "85C496+497", enable_flash_sis85c496}, + {0x1039, 0x0406, NT, "SiS", "501/5101/5501", enable_flash_sis501}, + {0x1039, 0x5511, NT, "SiS", "5511", enable_flash_sis5511}, + {0x1039, 0x5596, NT, "SiS", "5596", enable_flash_sis5596}, + {0x1039, 0x5571, NT, "SiS", "5571", enable_flash_sis530}, + {0x1039, 0x5591, NT, "SiS", "5591/5592", enable_flash_sis530}, + {0x1039, 0x5597, NT, "SiS", "5597/5598/5581/5120", enable_flash_sis530}, + {0x1039, 0x0530, NT, "SiS", "530", enable_flash_sis530}, + {0x1039, 0x5600, NT, "SiS", "600", enable_flash_sis530}, + {0x1039, 0x0620, NT, "SiS", "620", enable_flash_sis530}, + {0x1039, 0x0540, NT, "SiS", "540", enable_flash_sis540}, + {0x1039, 0x0630, NT, "SiS", "630", enable_flash_sis630}, + {0x1039, 0x0635, NT, "SiS", "635", enable_flash_sis630}, + {0x1039, 0x0640, NT, "SiS", "640", enable_flash_sis630}, + {0x1039, 0x0645, NT, "SiS", "645", enable_flash_sis630}, + {0x1039, 0x0646, NT, "SiS", "645DX", enable_flash_sis630}, + {0x1039, 0x0648, NT, "SiS", "648", enable_flash_sis630}, + {0x1039, 0x0650, NT, "SiS", "650", enable_flash_sis630}, + {0x1039, 0x0651, NT, "SiS", "651", enable_flash_sis630}, + {0x1039, 0x0655, NT, "SiS", "655", enable_flash_sis630}, + {0x1039, 0x0730, NT, "SiS", "730", enable_flash_sis630}, + {0x1039, 0x0733, NT, "SiS", "733", enable_flash_sis630}, + {0x1039, 0x0735, OK, "SiS", "735", enable_flash_sis630}, + {0x1039, 0x0740, NT, "SiS", "740", enable_flash_sis630}, + {0x1039, 0x0745, NT, "SiS", "745", enable_flash_sis630}, + {0x1039, 0x0746, NT, "SiS", "746", enable_flash_sis630}, + {0x1039, 0x0748, NT, "SiS", "748", enable_flash_sis630}, + {0x1039, 0x0755, NT, "SiS", "755", enable_flash_sis630}, {0x1106, 0x8324, OK, "VIA", "CX700", enable_flash_vt823x}, {0x1106, 0x8231, NT, "VIA", "VT8231", enable_flash_vt823x}, {0x1106, 0x3074, NT, "VIA", "VT8233", enable_flash_vt823x}, Modified: trunk/print.c =================================================================== --- trunk/print.c 2009-11-15 17:13:29 UTC (rev 759) +++ trunk/print.c 2009-11-15 17:20:21 UTC (rev 760) @@ -260,6 +260,7 @@ { "ASUS", "P6T Deluxe V2", }, { "A-Trend", "ATC-6220", }, { "BCOM", "WinNET100", }, + { "Elitegroup", "K7S5A", }, { "Elitegroup", "P6VAP-A+", }, { "GIGABYTE", "GA-6BXC", }, { "GIGABYTE", "GA-6BXDU", },

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom