flashrom

flashrom@flashrom.org

9092 discussions

[PATCH] Convert satasii to msg_*
by Sean Nelson 10 Jan '10

10 Jan '10

Convert all messages in satasii.c to the new message infrastructure. Signed-off-by: Sean Nelson <audiohacked(a)gmail.com>

2 2

[commit] r849 - trunk
by svn＠flashrom.org 10 Jan '10

10 Jan '10

Author: snelson Date: 2010-01-10 00:50:27 +0100 (Sun, 10 Jan 2010) New Revision: 849 Modified: trunk/satasii.c Log: Convert all messages in satasii.c to the new message infrastructure. Signed-off-by: Sean Nelson <audiohacked(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/satasii.c =================================================================== --- trunk/satasii.c 2010-01-09 23:46:39 UTC (rev 848) +++ trunk/satasii.c 2010-01-09 23:50:27 UTC (rev 849) @@ -63,7 +63,7 @@ /* Check if ROM cycle are OK. */ if ((id != 0x0680) && (!(mmio_readl(sii_bar) & (1 << 26)))) - printf("Warning: Flash seems unconnected.\n"); + msg_pinfo("Warning: Flash seems unconnected.\n"); buses_supported = CHIP_BUSTYPE_PARALLEL;

1 0

[PATCH] Convert serial to msg_*
by Sean Nelson 10 Jan '10

10 Jan '10

Convert all messages in serial.c to the new message infrastructure. Signed-off-by: Sean Nelson <audiohacked(a)gmail.com>

2 2

[commit] r848 - trunk
by svn＠flashrom.org 10 Jan '10

10 Jan '10

Author: snelson Date: 2010-01-10 00:46:39 +0100 (Sun, 10 Jan 2010) New Revision: 848 Modified: trunk/serial.c Log: Convert all messages in serial.c to the new message infrastructure. Signed-off-by: Sean Nelson <audiohacked(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/serial.c =================================================================== --- trunk/serial.c 2010-01-09 23:34:45 UTC (rev 847) +++ trunk/serial.c 2010-01-09 23:46:39 UTC (rev 848) @@ -139,7 +139,7 @@ for (i = 0;; i++) { if (sp_baudtable[i].baud == 0) { close(fd); - fprintf(stderr, + msg_perr( "Error: cannot configure for baudrate %d\n", baud); exit(1); @@ -193,7 +193,7 @@ if (tmp == -1) return 1; if (!tmp) - printf_debug("Empty write\n"); + msg_pdbg("Empty write\n"); writecnt -= tmp; buf += tmp; } @@ -214,7 +214,7 @@ if (tmp == -1) return 1; if (!tmp) - printf_debug("Empty read\n"); + msg_pdbg("Empty read\n"); readcnt -= tmp; buf += tmp; }

1 0

[PATCH] Convert wbsio_spi to msg_*
by Sean Nelson 10 Jan '10

10 Jan '10

Convert all messages in wbsio_spi.c to the new message infrastructure. Signed-off-by: Sean Nelson <audiohacked(a)gmail.com>

2 2

[commit] r847 - trunk
by svn＠flashrom.org 10 Jan '10

10 Jan '10

Author: snelson Date: 2010-01-10 00:34:45 +0100 (Sun, 10 Jan 2010) New Revision: 847 Modified: trunk/wbsio_spi.c Log: Convert all messages in wbsio_spi.c to the new message infrastructure. Signed-off-by: Sean Nelson <audiohacked(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/wbsio_spi.c =================================================================== --- trunk/wbsio_spi.c 2010-01-09 23:31:13 UTC (rev 846) +++ trunk/wbsio_spi.c 2010-01-09 23:34:45 UTC (rev 847) @@ -22,17 +22,6 @@ #include "flash.h" #include "spi.h" -/* Change this to #define if you want lowlevel debugging of commands - * sent to the Winbond W836xx SPI controller. - */ -#undef COMM_DEBUG - -#ifdef COMM_DEBUG -#define msg_comm_debug printf_debug -#else -#define msg_comm_debug(...) do {} while (0) -#endif - #define WBSIO_PORT1 0x2e #define WBSIO_PORT2 0x4e @@ -46,18 +35,18 @@ w836xx_ext_enter(port); id = sio_read(port, 0x20); if (id != 0xa0) { - fprintf(stderr, "\nW83627 not found at 0x%x, id=0x%02x want=0xa0.\n", port, id); + msg_perr("\nW83627 not found at 0x%x, id=0x%02x want=0xa0.\n", port, id); goto done; } if (0 == (sio_read(port, 0x24) & 2)) { - fprintf(stderr, "\nW83627 found at 0x%x, but SPI pins are not enabled. (CR[0x24] bit 1=0)\n", port); + msg_perr("\nW83627 found at 0x%x, but SPI pins are not enabled. (CR[0x24] bit 1=0)\n", port); goto done; } sio_write(port, 0x07, 0x06); if (0 == (sio_read(port, 0x30) & 1)) { - fprintf(stderr, "\nW83627 found at 0x%x, but SPI is not enabled. (LDN6[0x30] bit 0=0)\n", port); + msg_perr("\nW83627 found at 0x%x, but SPI is not enabled. (LDN6[0x30] bit 0=0)\n", port); goto done; } @@ -74,7 +63,7 @@ if (0 == (wbsio_spibase = wbsio_get_spibase(WBSIO_PORT2))) return 1; - msg_comm_debug("\nwbsio_spibase = 0x%x\n", wbsio_spibase); + msg_pspew("\nwbsio_spibase = 0x%x\n", wbsio_spibase); buses_supported |= CHIP_BUSTYPE_SPI; spi_controller = SPI_CONTROLLER_WBSIO; @@ -108,42 +97,42 @@ int i; uint8_t mode = 0; - msg_comm_debug("%s:", __func__); + msg_pspew("%s:", __func__); if (1 == writecnt && 0 == readcnt) { mode = 0x10; } else if (2 == writecnt && 0 == readcnt) { OUTB(writearr[1], wbsio_spibase + 4); - msg_comm_debug(" data=0x%02x", writearr[1]); + msg_pspew(" data=0x%02x", writearr[1]); mode = 0x20; } else if (1 == writecnt && 2 == readcnt) { mode = 0x30; } else if (4 == writecnt && 0 == readcnt) { - msg_comm_debug(" addr=0x%02x", (writearr[1] & 0x0f)); + msg_pspew(" addr=0x%02x", (writearr[1] & 0x0f)); for (i = 2; i < writecnt; i++) { OUTB(writearr[i], wbsio_spibase + i); - msg_comm_debug("%02x", writearr[i]); + msg_pspew("%02x", writearr[i]); } mode = 0x40 | (writearr[1] & 0x0f); } else if (5 == writecnt && 0 == readcnt) { - msg_comm_debug(" addr=0x%02x", (writearr[1] & 0x0f)); + msg_pspew(" addr=0x%02x", (writearr[1] & 0x0f)); for (i = 2; i < 4; i++) { OUTB(writearr[i], wbsio_spibase + i); - msg_comm_debug("%02x", writearr[i]); + msg_pspew("%02x", writearr[i]); } OUTB(writearr[i], wbsio_spibase + i); - msg_comm_debug(" data=0x%02x", writearr[i]); + msg_pspew(" data=0x%02x", writearr[i]); mode = 0x50 | (writearr[1] & 0x0f); } else if (8 == writecnt && 0 == readcnt) { - msg_comm_debug(" addr=0x%02x", (writearr[1] & 0x0f)); + msg_pspew(" addr=0x%02x", (writearr[1] & 0x0f)); for (i = 2; i < 4; i++) { OUTB(writearr[i], wbsio_spibase + i); - msg_comm_debug("%02x", writearr[i]); + msg_pspew("%02x", writearr[i]); } - msg_comm_debug(" data=0x"); + msg_pspew(" data=0x"); for (; i < writecnt; i++) { OUTB(writearr[i], wbsio_spibase + i); - msg_comm_debug("%02x", writearr[i]); + msg_pspew("%02x", writearr[i]); } mode = 0x60 | (writearr[1] & 0x0f); } else if (5 == writecnt && 4 == readcnt) { @@ -154,17 +143,17 @@ */ ; } else if (4 == writecnt && readcnt >= 1 && readcnt <= 4) { - msg_comm_debug(" addr=0x%02x", (writearr[1] & 0x0f)); + msg_pspew(" addr=0x%02x", (writearr[1] & 0x0f)); for (i = 2; i < writecnt; i++) { OUTB(writearr[i], wbsio_spibase + i); - msg_comm_debug("%02x", writearr[i]); + msg_pspew("%02x", writearr[i]); } mode = ((7 + readcnt) << 4) | (writearr[1] & 0x0f); } - msg_comm_debug(" cmd=%02x mode=%02x\n", writearr[0], mode); + msg_pspew(" cmd=%02x mode=%02x\n", writearr[0], mode); if (!mode) { - fprintf(stderr, "%s: unsupported command type wr=%d rd=%d\n", + msg_perr("%s: unsupported command type wr=%d rd=%d\n", __func__, writecnt, readcnt); /* Command type refers to the number of bytes read/written. */ return SPI_INVALID_LENGTH; @@ -177,12 +166,12 @@ if (!readcnt) return 0; - msg_comm_debug("%s: returning data =", __func__); + msg_pspew("%s: returning data =", __func__); for (i = 0; i < readcnt; i++) { readarr[i] = INB(wbsio_spibase + 4 + i); - msg_comm_debug(" 0x%02x", readarr[i]); + msg_pspew(" 0x%02x", readarr[i]); } - msg_comm_debug("\n"); + msg_pspew("\n"); return 0; } @@ -191,7 +180,7 @@ int size = flash->total_size * 1024; if (size > 1024 * 1024) { - fprintf(stderr, "%s: Winbond saved on 4 register bits so max chip size is 1024 KB!\n", __func__); + msg_perr("%s: Winbond saved on 4 register bits so max chip size is 1024 KB!\n", __func__); return 1; } @@ -203,7 +192,7 @@ int size = flash->total_size * 1024; if (size > 1024 * 1024) { - fprintf(stderr, "%s: Winbond saved on 4 register bits so max chip size is 1024 KB!\n", __func__); + msg_perr("%s: Winbond saved on 4 register bits so max chip size is 1024 KB!\n", __func__); return 1; }

1 0

Fix mess-up in commit 845
by Michael Karcher 10 Jan '10

10 Jan '10

commit 845 is wrong, as I deleted a wrong line when I wanted to remove debugging print code. This (hopefully obviously correct) patch fixes the issue. As a previous version (before adding the debugging statement) was already executed on the board, the missing OUTW was executed on the testers machine on an earlier flashrom run. Regards, Michael Karcher Index: board_enable.c =================================================================== --- board_enable.c (Revision 845) +++ board_enable.c (Arbeitskopie) @@ -967,7 +967,7 @@ base = pci_read_word(dev, 0x74); temp = INW(base + 0x68); temp &= ~(1 << 0); /* Make pin output? */ - printf_debug("changed to %04x\n",temp); + OUTW(temp, base + 0x68); temp = INW(base + 0x64); temp |= (1 << 0); /* Raise output? */

2 2

[commit] r846 - trunk
by svn＠flashrom.org 10 Jan '10

10 Jan '10

Author: mkarcher Date: 2010-01-10 00:31:13 +0100 (Sun, 10 Jan 2010) New Revision: 846 Modified: trunk/board_enable.c Log: commit 845 is wrong, as I deleted a wrong line when I wanted to remove debugging print code. This (hopefully obviously correct) patch fixes the issue. As a previous version (before adding the debugging statement) was already executed on the board, the missing OUTW was executed on the testers machine on an earlier flashrom run. Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Acked-by: Luc Verhaegen <libv(a)skynet.be> Modified: trunk/board_enable.c =================================================================== --- trunk/board_enable.c 2010-01-09 17:36:06 UTC (rev 845) +++ trunk/board_enable.c 2010-01-09 23:31:13 UTC (rev 846) @@ -967,7 +967,7 @@ base = pci_read_word(dev, 0x74); temp = INW(base + 0x68); temp &= ~(1 << 0); /* Make pin output? */ - printf_debug("changed to %04x\n",temp); + OUTW(temp, base + 0x68); temp = INW(base + 0x64); temp |= (1 << 0); /* Raise output? */

1 0

Re: [flashrom] Big problem after flash of SST SST25VF016B on HP Compaq 615
by Carl-Daniel Hailfinger 09 Jan '10

09 Jan '10

Hi Parallix, I have re-added the flashrom list so others can follow our conversation. I just wanted to avoid any BIOS images on the list for legal reasons. On 09.01.2010 22:17, Parallix wrote: > Am Samstag, 9. Januar 2010 21:55:56 schrieben Sie: > >> On 09.01.2010 20:33, Parallix wrote: >> >>> COMPLETE. >>> Verifying flash... VERIFY FAILED at 0x00010058! Expected=0x15, Read=0x05, failed byte count from 0x00000000-0x001fffff: 0x12d075 >>> >>> A verification by reading the BIOS (via flashrom -r <file>) and comparing it with >>> the original bios (via diff) shows the same difference. >>> >>> >> This is very odd. Can you try flashing the backup BIOS with unmodified >> latest flashrom, then read back the result? >> > > I used the unpatched flashrom v0.9.1-r845. > Thanks. >> Please mail me personally at <c-d.hailfinger.devel.2006(a)gmx.net> the >> following files (preferably bz2 compressed): >> - original backup >> > > Is attatched > > >> - readback image after flashing with unmodified latest flashrom >> > > Is attachted, too. It contains a lot of identical bytes and thus results > in a much smaller bz2 file. > Thanks. >From your log file: > Chip status register is 8c > Chip status register: Block Protect Write Disable (BPL) is set This means it is probably not possible to undo the locking. > Chip status register: Auto Address Increment Programming (AAI) is not set > Chip status register: Bit 5 / Block Protect 3 (BP3) is not set > Chip status register: Bit 4 / Block Protect 2 (BP2) is not set > Chip status register: Bit 3 / Block Protect 1 (BP1) is set > Chip status register: Bit 2 / Block Protect 0 (BP0) is set > Chip status register: Write Enable Latch (WEL) is not set > Chip status register: Write In Progress (WIP/BUSY) is not set > Resulting block protection : 1C0000H-1FFFFFH The good news is that the erase result is as expected from the block protection data. The not-so-good news is that we need a board enable routine for your laptop if we want to flash the protected blocks. The bad news is that we probably need SuperIO or EC information (which we don't have) to write the board enable routine. Now let us focus on recovery. Can you read back the flash chip again and compare it against the last readback? They should be identical. If not, we have a really big problem where some unknown software is modifying the flash chip. Then try to write with a flashrom patched with the following patch. It will also turn up at http://patchwork.coreboot.org/project/flashrom/list/ shortly in case you have problems extracting the patch from this mail. Do not erase, check only if 0x0-0x1BFFFF is erased, then write 0x0-0x1BFFFF. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-parallix/spi.c =================================================================== --- flashrom-parallix/spi.c (Revision 845) +++ flashrom-parallix/spi.c (Arbeitskopie) @@ -997,10 +997,11 @@ */ int spi_chip_write_1(struct flashchip *flash, uint8_t *buf) { - int total_size = 1024 * flash->total_size; + int total_size = 0x1C0000; int i, result = 0; spi_disable_blockprotect(); +#if 0 /* Erase first */ printf("Erasing flash before programming... "); if (erase_flash(flash)) { @@ -1008,6 +1009,11 @@ return -1; } printf("done.\n"); +#endif + if (check_erased_range(flash, 0, total_size)) { + fprintf(stderr, "WTF erased area failed erasecheck!\n"); + return 1; + } for (i = 0; i < total_size; i++) { result = spi_byte_program(i, buf[i]); if (result) -- Developer quote of the year: "We are juggling too many chainsaws and flaming arrows and tigers."

1 0

[PATCH] Convert ichspi to msg_*
by Sean Nelson 09 Jan '10

09 Jan '10

Convert all messages in ichspi.c to the new message infrastructure. Signed-off-by: Sean Nelson <audiohacked(a)gmail.com>

2 1

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom