flashrom

flashrom@flashrom.org

5 participants
9161 discussions

[PATCH 02/11] Rebased Board Enable Patch: Abit VT6X4
by Sean Nelson 19 Mar '10

19 Mar '10

This board has *no* usable IDs at all, neither DMI nor PCI subsystem IDs. You have to force it using "-m abit:vt6x4" Try 3: really correct polarity of the GPIO Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> --- board_enable.c | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-) diff --git a/board_enable.c b/board_enable.c index 9ac5653..7b1fa12 100644 --- a/board_enable.c +++ b/board_enable.c @@ -1009,26 +1009,34 @@ static int board_soyo_sy_7vca(const char *name) /* PM IO base */ base = pci_read_long(dev, 0x48) & 0x0000FF00; /* Drop GPO0 */ tmp = INB(base + 0x4C); tmp &= ~0x01; OUTB(tmp, base + 0x4C); return 0; } /** + * Suited for Abit VT6X5: Pro133x + VT82C686A + */ +static int via_apollo_gpo4_lower(const char *name) +{ + return via_apollo_gpo_set(4, 0); +} + +/** * Enable some GPIO pin on SiS southbridge. * Suited for MSI 651M-L: SiS651 / SiS962 */ static int board_msi_651ml(const char *name) { struct pci_dev *dev; uint16_t base, temp; dev = pci_dev_find(0x1039, 0x0962); if (!dev) { fprintf(stderr, "Expected south bridge not found\n"); return 1; } @@ -1253,26 +1261,27 @@ static int it8712f_gpio3_1_raise(const char *name) * legacy bios is installed and when autodetection is not possible, these ids * can be used to identify the board through the -m command line argument. * * When a board is identified through its coreboot ids (in both cases), the * main pci ids are still required to match, as a safeguard. */ /* Please keep this list alphabetically ordered by vendor/board name. */ struct board_pciid_enable board_pciid_enables[] = { /* first pci-id set [4], second pci-id set [4], dmi identifier coreboot id [2], vendor name board name max_rom_... OK? flash enable */ {0x8086, 0x2926, 0x147b, 0x1084, 0x11ab, 0x4364, 0x147b, 0x1084, NULL, NULL, NULL, "Abit", "IP35", 0, OK, intel_ich_gpio16_raise}, {0x8086, 0x2930, 0x147b, 0x1083, 0x10ec, 0x8167, 0x147b, 0x1083, NULL, NULL, NULL, "Abit", "IP35 Pro", 0, OK, intel_ich_gpio16_raise}, + {0x1106, 0x0691, 0, 0, 0x1106, 0x3057, 0, 0, NULL, "abit", "vt6x4", "Abit", "VT6X4", 0, NT, via_apollo_gpo4_lower}, {0x105a, 0x0d30, 0x105a, 0x4d33, 0x8086, 0x1130, 0x8086, 0, NULL, NULL, NULL, "Acorp", "6A815EPD", 0, OK, board_acorp_6a815epd}, {0x8086, 0x24D4, 0x1849, 0x24D0, 0x8086, 0x24D5, 0x1849, 0x9739, NULL, NULL, NULL, "ASRock", "P4i65GV", 0, OK, intel_ich_gpio23_raise}, {0x1022, 0x746B, 0, 0, 0, 0, 0, 0, NULL, "AGAMI", "ARUMA", "agami", "Aruma", 0, OK, w83627hf_gpio24_raise_2e}, {0x1106, 0x3177, 0x17F2, 0x3177, 0x1106, 0x3148, 0x17F2, 0x3148, NULL, NULL, NULL, "Albatron", "PM266A", 0, OK, w836xx_memw_enable_2e}, {0x1106, 0x3205, 0x1106, 0x3205, 0x10EC, 0x8139, 0xA0A0, 0x0477, NULL, NULL, NULL, "AOpen", "vKM400Am-S", 0, OK, it8705f_write_enable_2e}, {0x1022, 0x2090, 0, 0, 0x1022, 0x2080, 0, 0, NULL, "artecgroup", "dbe61", "Artec Group", "DBE61", 0, OK, board_artecgroup_dbe6x}, {0x1022, 0x2090, 0, 0, 0x1022, 0x2080, 0, 0, NULL, "artecgroup", "dbe62", "Artec Group", "DBE62", 0, OK, board_artecgroup_dbe6x}, {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3065, 0x1043, 0x80ED, NULL, NULL, NULL, "ASUS", "A7V600-X", 0, OK, it8712f_gpio3_1_raise}, {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3177, 0x1043, 0x808C, NULL, NULL, NULL, "ASUS", "A7V8X", 0, OK, board_asus_a7v8x}, {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3177, 0x1043, 0x80A1, NULL, NULL, NULL, "ASUS", "A7V8X-X", 0, OK, it8712f_gpio3_1_raise}, {0x1106, 0x3177, 0x1043, 0x80A1, 0x1106, 0x3205, 0x1043, 0x8118, NULL, NULL, NULL, "ASUS", "A7V8X-MX SE", 0, OK, w836xx_memw_enable_2e}, {0x10DE, 0x005E, 0x1043, 0x815A, 0x10DE, 0x0054, 0x1043, 0x815A, NULL, NULL, NULL, "ASUS", "A8N", 0, NT, board_shuttle_fn25}, {0x10DE, 0x0264, 0x1043, 0x81C0, 0x10DE, 0x0260, 0x1043, 0x81C0, NULL, NULL, NULL, "ASUS", "M2NBP-VM CSM", 0, OK, nvidia_mcp_gpio0_raise}, -- 1.6.6

1 1

[commit] r950 - trunk
by repository service 19 Mar '10

19 Mar '10

Author: snelson Date: Fri Mar 19 23:30:49 2010 New Revision: 950 URL: http://flashrom.org/trac/coreboot/changeset/950 Log: Rebased Board Enable Patch: Abit VT6X4 This board has *no* usable IDs at all, neither DMI nor PCI subsystem IDs. You have to force it using "-m abit:vt6x4" Try 3: really correct polarity of the GPIO Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Acked-by: Sean Nelson <audiohacked(a)gmail.com> Modified: trunk/board_enable.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Fri Mar 19 23:26:44 2010 (r949) +++ trunk/board_enable.c Fri Mar 19 23:30:49 2010 (r950) @@ -1019,6 +1019,14 @@ } /** + * Suited for Abit VT6X5: Pro133x + VT82C686A + */ +static int via_apollo_gpo4_lower(const char *name) +{ + return via_apollo_gpo_set(4, 0); +} + +/** * Enable some GPIO pin on SiS southbridge. * Suited for MSI 651M-L: SiS651 / SiS962 */ @@ -1263,6 +1271,7 @@ /* first pci-id set [4], second pci-id set [4], dmi identifier coreboot id [2], vendor name board name max_rom_... OK? flash enable */ {0x8086, 0x2926, 0x147b, 0x1084, 0x11ab, 0x4364, 0x147b, 0x1084, NULL, NULL, NULL, "Abit", "IP35", 0, OK, intel_ich_gpio16_raise}, {0x8086, 0x2930, 0x147b, 0x1083, 0x10ec, 0x8167, 0x147b, 0x1083, NULL, NULL, NULL, "Abit", "IP35 Pro", 0, OK, intel_ich_gpio16_raise}, + {0x1106, 0x0691, 0, 0, 0x1106, 0x3057, 0, 0, NULL, "abit", "vt6x4", "Abit", "VT6X4", 0, NT, via_apollo_gpo4_lower}, {0x105a, 0x0d30, 0x105a, 0x4d33, 0x8086, 0x1130, 0x8086, 0, NULL, NULL, NULL, "Acorp", "6A815EPD", 0, OK, board_acorp_6a815epd}, {0x8086, 0x24D4, 0x1849, 0x24D0, 0x8086, 0x24D5, 0x1849, 0x9739, NULL, NULL, NULL, "ASRock", "P4i65GV", 0, OK, intel_ich_gpio23_raise}, {0x1022, 0x746B, 0, 0, 0, 0, 0, 0, NULL, "AGAMI", "ARUMA", "agami", "Aruma", 0, OK, w83627hf_gpio24_raise_2e},

1 0

[PATCH 01/11] Rebased Board Enable Patch: Add Asus A8N.
by Sean Nelson 19 Mar '10

19 Mar '10

Signed-off-by: Luc Verhaegen <libv(a)skynet.be> --- board_enable.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/board_enable.c b/board_enable.c index 66b5998..9ac5653 100644 --- a/board_enable.c +++ b/board_enable.c @@ -1264,26 +1264,27 @@ struct board_pciid_enable board_pciid_enables[] = { {0x8086, 0x2926, 0x147b, 0x1084, 0x11ab, 0x4364, 0x147b, 0x1084, NULL, NULL, NULL, "Abit", "IP35", 0, OK, intel_ich_gpio16_raise}, {0x8086, 0x2930, 0x147b, 0x1083, 0x10ec, 0x8167, 0x147b, 0x1083, NULL, NULL, NULL, "Abit", "IP35 Pro", 0, OK, intel_ich_gpio16_raise}, {0x105a, 0x0d30, 0x105a, 0x4d33, 0x8086, 0x1130, 0x8086, 0, NULL, NULL, NULL, "Acorp", "6A815EPD", 0, OK, board_acorp_6a815epd}, {0x8086, 0x24D4, 0x1849, 0x24D0, 0x8086, 0x24D5, 0x1849, 0x9739, NULL, NULL, NULL, "ASRock", "P4i65GV", 0, OK, intel_ich_gpio23_raise}, {0x1022, 0x746B, 0, 0, 0, 0, 0, 0, NULL, "AGAMI", "ARUMA", "agami", "Aruma", 0, OK, w83627hf_gpio24_raise_2e}, {0x1106, 0x3177, 0x17F2, 0x3177, 0x1106, 0x3148, 0x17F2, 0x3148, NULL, NULL, NULL, "Albatron", "PM266A", 0, OK, w836xx_memw_enable_2e}, {0x1106, 0x3205, 0x1106, 0x3205, 0x10EC, 0x8139, 0xA0A0, 0x0477, NULL, NULL, NULL, "AOpen", "vKM400Am-S", 0, OK, it8705f_write_enable_2e}, {0x1022, 0x2090, 0, 0, 0x1022, 0x2080, 0, 0, NULL, "artecgroup", "dbe61", "Artec Group", "DBE61", 0, OK, board_artecgroup_dbe6x}, {0x1022, 0x2090, 0, 0, 0x1022, 0x2080, 0, 0, NULL, "artecgroup", "dbe62", "Artec Group", "DBE62", 0, OK, board_artecgroup_dbe6x}, {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3065, 0x1043, 0x80ED, NULL, NULL, NULL, "ASUS", "A7V600-X", 0, OK, it8712f_gpio3_1_raise}, {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3177, 0x1043, 0x808C, NULL, NULL, NULL, "ASUS", "A7V8X", 0, OK, board_asus_a7v8x}, {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3177, 0x1043, 0x80A1, NULL, NULL, NULL, "ASUS", "A7V8X-X", 0, OK, it8712f_gpio3_1_raise}, {0x1106, 0x3177, 0x1043, 0x80A1, 0x1106, 0x3205, 0x1043, 0x8118, NULL, NULL, NULL, "ASUS", "A7V8X-MX SE", 0, OK, w836xx_memw_enable_2e}, + {0x10DE, 0x005E, 0x1043, 0x815A, 0x10DE, 0x0054, 0x1043, 0x815A, NULL, NULL, NULL, "ASUS", "A8N", 0, NT, board_shuttle_fn25}, {0x10DE, 0x0264, 0x1043, 0x81C0, 0x10DE, 0x0260, 0x1043, 0x81C0, NULL, NULL, NULL, "ASUS", "M2NBP-VM CSM", 0, OK, nvidia_mcp_gpio0_raise}, {0x1106, 0x1336, 0x1043, 0x80ed, 0x1106, 0x3288, 0x1043, 0x8249, NULL, NULL, NULL, "ASUS", "M2V-MX", 0, OK, via_vt823x_gpio5_raise}, {0x8086, 0x1a30, 0x1043, 0x8070, 0x8086, 0x244b, 0x1043, 0x8028, NULL, NULL, NULL, "ASUS", "P4B266", 0, OK, intel_ich_gpio22_raise}, {0x8086, 0x1A30, 0x1043, 0x8025, 0x8086, 0x244B, 0x104D, 0x80F0, NULL, NULL, NULL, "ASUS", "P4B266-LM", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x24D3, 0x1043, 0x80A6, 0x8086, 0x2578, 0x1043, 0x80F6, NULL, NULL, NULL, "ASUS", "P4C800-E Deluxe", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x2570, 0x1043, 0x80F2, 0x105A, 0x3373, 0x1043, 0x80F5, NULL, NULL, NULL, "ASUS", "P4P800-E Deluxe", 0, OK, intel_ich_gpio21_raise}, {0x10B9, 0x1541, 0, 0, 0x10B9, 0x1533, 0, 0, "^P5A$", "asus", "p5a", "ASUS", "P5A", 0, OK, board_asus_p5a}, {0x10DE, 0x0030, 0x1043, 0x818a, 0x8086, 0x100E, 0x1043, 0x80EE, NULL, NULL, NULL, "ASUS", "P5ND2-SLI Deluxe", 0, OK, nvidia_mcp_gpio10_raise}, {0x1106, 0x3149, 0x1565, 0x3206, 0x1106, 0x3344, 0x1565, 0x1202, NULL, NULL, NULL, "Biostar", "P4M80-M4", 0, OK, it8705f_write_enable_2e}, {0x8086, 0x3590, 0x1028, 0x016c, 0x1000, 0x0030, 0x1028, 0x016c, NULL, NULL, NULL, "Dell", "PowerEdge 1850", 0, OK, intel_ich_gpio23_raise}, {0x1039, 0x5513, 0x1019, 0x0A41, 0x1039, 0x0018, 0, 0, NULL, NULL, NULL, "Elitegroup", "K7S6A", 0, OK, it8705f_write_enable_2e}, {0x1106, 0x3038, 0x1019, 0x0996, 0x1106, 0x3177, 0x1019, 0x0996, NULL, NULL, NULL, "Elitegroup", "K7VTA3", 256, OK, it8705f_write_enable_2e}, {0x1106, 0x3177, 0x1106, 0x3177, 0x1106, 0x3059, 0x1695, 0x3005, NULL, NULL, NULL, "EPoX", "EP-8K5A2", 0, OK, w836xx_memw_enable_2e}, -- 1.6.6

1 1

[commit] r949 - trunk
by repository service 19 Mar '10

19 Mar '10

Author: snelson Date: Fri Mar 19 23:26:44 2010 New Revision: 949 URL: http://flashrom.org/trac/coreboot/changeset/949 Log: Rebased Board Enable Patch: Add Asus A8N. Signed-off-by: Luc Verhaegen <libv(a)skynet.be> Acked-by: Sean Nelson <audiohacked(a)gmail.com> Modified: trunk/board_enable.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Fri Mar 19 19:47:06 2010 (r948) +++ trunk/board_enable.c Fri Mar 19 23:26:44 2010 (r949) @@ -1274,6 +1274,7 @@ {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3177, 0x1043, 0x808C, NULL, NULL, NULL, "ASUS", "A7V8X", 0, OK, board_asus_a7v8x}, {0x1106, 0x3189, 0x1043, 0x807F, 0x1106, 0x3177, 0x1043, 0x80A1, NULL, NULL, NULL, "ASUS", "A7V8X-X", 0, OK, it8712f_gpio3_1_raise}, {0x1106, 0x3177, 0x1043, 0x80A1, 0x1106, 0x3205, 0x1043, 0x8118, NULL, NULL, NULL, "ASUS", "A7V8X-MX SE", 0, OK, w836xx_memw_enable_2e}, + {0x10DE, 0x005E, 0x1043, 0x815A, 0x10DE, 0x0054, 0x1043, 0x815A, NULL, NULL, NULL, "ASUS", "A8N", 0, NT, board_shuttle_fn25}, {0x10DE, 0x0264, 0x1043, 0x81C0, 0x10DE, 0x0260, 0x1043, 0x81C0, NULL, NULL, NULL, "ASUS", "M2NBP-VM CSM", 0, OK, nvidia_mcp_gpio0_raise}, {0x1106, 0x1336, 0x1043, 0x80ed, 0x1106, 0x3288, 0x1043, 0x8249, NULL, NULL, NULL, "ASUS", "M2V-MX", 0, OK, via_vt823x_gpio5_raise}, {0x8086, 0x1a30, 0x1043, 0x8070, 0x8086, 0x244b, 0x1043, 0x8028, NULL, NULL, NULL, "ASUS", "P4B266", 0, OK, intel_ich_gpio22_raise},

1 0

[commit] r948 - trunk
by repository service 19 Mar '10

19 Mar '10

Author: snelson Date: Fri Mar 19 19:47:06 2010 New Revision: 948 URL: http://flashrom.org/trac/coreboot/changeset/948 Log: rename print_82802ab_status to print_status_82802ab add unlock_82802ab strip unlock code from erase_block_82802ab rename erase_82802ab_block to erase_block_80280ab delete sharplhf00l04.o from Makefile delete *_lhf00l04* from chipdrivers.h add unlock_stm50flw0x0x delete wait_stm50flw0x0x delete write_page_stm50flw0x0x convert erase_stm50flw0x0x to erase_chip_stm50flw0x0x delete write_stm50flw0x0x add unlock_82802ab to two Intel chips with TEST_BAD_WRITE change the status of 82802AB, 82802AC, M50FW040, M50FW080 to TEST_OK_PR Signed-off-by: Sean Nelson <audiohacked(a)gmail.com> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/82802ab.c trunk/Makefile trunk/chipdrivers.h trunk/flashchips.c trunk/sharplhf00l04.c trunk/stm50flw0x0x.c Modified: trunk/82802ab.c ============================================================================== --- trunk/82802ab.c Wed Mar 17 07:19:23 2010 (r947) +++ trunk/82802ab.c Fri Mar 19 19:47:06 2010 (r948) @@ -32,7 +32,7 @@ #include "chipdrivers.h" // I need that Berkeley bit-map printer -void print_82802ab_status(uint8_t status) +void print_status_82802ab(uint8_t status) { printf_debug("%s", status & 0x80 ? "Ready:" : "Busy:"); printf_debug("%s", status & 0x40 ? "BE SUSPEND:" : "BE RUN/FINISH:"); @@ -92,18 +92,27 @@ return status; } -int erase_82802ab_block(struct flashchip *flash, unsigned int page, unsigned int pagesize) +int unlock_82802ab(struct flashchip *flash) +{ + int i; + //chipaddr wrprotect = flash->virtual_registers + page + 2; + + for (i = 0; i < flash->total_size; i+= flash->page_size) + { + chip_writeb(0, flash->virtual_registers + i + 2); + } + + return 0; +} + +int erase_block_82802ab(struct flashchip *flash, unsigned int page, unsigned int pagesize) { chipaddr bios = flash->virtual_memory; - chipaddr wrprotect = flash->virtual_registers + page + 2; uint8_t status; // clear status register chip_writeb(0x50, bios + page); - // clear write protect - chip_writeb(0, wrprotect); - // now start it chip_writeb(0x20, bios + page); chip_writeb(0xd0, bios + page); @@ -111,7 +120,7 @@ // now let's see what the register is status = wait_82802ab(bios); - print_82802ab_status(status); + print_status_82802ab(status); if (check_erased_range(flash, page, pagesize)) { fprintf(stderr, "ERASE FAILED!\n"); @@ -130,7 +139,7 @@ printf("total_size is %d; flash->page_size is %d\n", total_size, flash->page_size); for (i = 0; i < total_size; i += flash->page_size) - if (erase_82802ab_block(flash, i, flash->page_size)) { + if (erase_block_82802ab(flash, i, flash->page_size)) { fprintf(stderr, "ERASE FAILED!\n"); return -1; } @@ -184,7 +193,7 @@ } /* erase block by block and write block by block; this is the most secure way */ - if (erase_82802ab_block(flash, i * page_size, page_size)) { + if (erase_block_82802ab(flash, i * page_size, page_size)) { fprintf(stderr, "ERASE FAILED!\n"); return -1; } Modified: trunk/Makefile ============================================================================== --- trunk/Makefile Wed Mar 17 07:19:23 2010 (r947) +++ trunk/Makefile Fri Mar 19 19:47:06 2010 (r948) @@ -41,7 +41,7 @@ LDFLAGS += -L/usr/local/lib endif -CHIP_OBJS = jedec.o stm50flw0x0x.o w39v040c.o w39v080fa.o sharplhf00l04.o w29ee011.o \ +CHIP_OBJS = jedec.o stm50flw0x0x.o w39v040c.o w39v080fa.o w29ee011.o \ sst28sf040.o m29f400bt.o 82802ab.o pm49fl00x.o \ sst49lfxxxc.o sst_fwhub.o flashchips.o spi.o spi25.o Modified: trunk/chipdrivers.h ============================================================================== --- trunk/chipdrivers.h Wed Mar 17 07:19:23 2010 (r947) +++ trunk/chipdrivers.h Fri Mar 19 19:47:06 2010 (r948) @@ -57,10 +57,11 @@ uint8_t wait_82802ab(chipaddr bios); int probe_82802ab(struct flashchip *flash); int erase_82802ab(struct flashchip *flash); -int erase_82802ab_block(struct flashchip *flash, unsigned int page, unsigned int pagesize); +int erase_block_82802ab(struct flashchip *flash, unsigned int page, unsigned int pagesize); int write_82802ab(struct flashchip *flash, uint8_t *buf); -void print_82802ab_status(uint8_t status); +void print_status_82802ab(uint8_t status); void write_page_82802ab(chipaddr bios, uint8_t *src, chipaddr dst, int page_size); +int unlock_82802ab(struct flashchip *flash); /* jedec.c */ uint8_t oddparity(uint8_t val); @@ -92,10 +93,6 @@ int unlock_49fl00x(struct flashchip *flash); int lock_49fl00x(struct flashchip *flash); -/* sharplhf00l04.c */ -int erase_lhf00l04_block(struct flashchip *flash, unsigned int blockaddr, unsigned int blocklen); -int write_lhf00l04(struct flashchip *flash, uint8_t *buf); - /* sst28sf040.c */ int erase_chip_28sf040(struct flashchip *flash, unsigned int addr, unsigned int blocklen); int erase_sector_28sf040(struct flashchip *flash, unsigned int address, unsigned int sector_size); @@ -124,11 +121,8 @@ int probe_w29ee011(struct flashchip *flash); /* stm50flw0x0x.c */ -int probe_stm50flw0x0x(struct flashchip *flash); -int erase_stm50flw0x0x(struct flashchip *flash); -int erase_block_stm50flw0x0x(struct flashchip *flash, unsigned int block, unsigned int blocksize); int erase_sector_stm50flw0x0x(struct flashchip *flash, unsigned int block, unsigned int blocksize); int erase_chip_stm50flw0x0x(struct flashchip *flash, unsigned int addr, unsigned int blocklen); -int write_stm50flw0x0x(struct flashchip *flash, uint8_t *buf); +int unlock_stm50flw0x0x(struct flashchip *flash); #endif /* !__CHIPDRIVERS_H__ */ Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Wed Mar 17 07:19:23 2010 (r947) +++ trunk/flashchips.c Fri Mar 19 19:47:06 2010 (r948) @@ -2328,9 +2328,10 @@ {4 * 1024, 2}, {112 * 1024, 1}, }, - .block_erase = erase_82802ab_block, + .block_erase = erase_block_82802ab, }, }, + .unlock = unlock_82802ab, .write = NULL, .read = read_memmapped, }, @@ -2355,9 +2356,10 @@ {4 * 1024, 2}, {8 * 1024, 1}, }, - .block_erase = erase_82802ab_block, + .block_erase = erase_block_82802ab, }, }, + .unlock = unlock_82802ab, .write = NULL, .read = read_memmapped, }, @@ -2377,9 +2379,10 @@ { { .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_82802ab_block, + .block_erase = erase_block_82802ab, }, }, + .unlock = unlock_82802ab, .write = write_82802ab, .read = read_memmapped, }, @@ -2393,16 +2396,17 @@ .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PRW, + .tested = TEST_OK_PR, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine does not use probe_timing (82802ab.c) */ .block_erasers = { { .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_82802ab_block, + .block_erase = erase_block_82802ab, }, }, + .unlock = unlock_82802ab, .write = write_82802ab, .read = read_memmapped, }, @@ -2416,16 +2420,17 @@ .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PRW, + .tested = TEST_OK_PR, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine does not use probe_timing (82802ab.c) */ .block_erasers = { { .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_82802ab_block, + .block_erase = erase_block_82802ab, }, }, + .unlock = unlock_82802ab, .write = write_82802ab, .read = read_memmapped, }, @@ -3453,7 +3458,7 @@ {64 * 1024, 15}, {8 * 1024, 8} }, - .block_erase = erase_lhf00l04_block, + .block_erase = erase_block_82802ab, }, { .eraseblocks = { {1024 * 1024, 1} @@ -3461,7 +3466,8 @@ .block_erase = NULL, /* 30 D0, only in A/A mux mode */ }, }, - .write = write_lhf00l04, + .unlock = unlock_82802ab, + .write = write_82802ab, .read = read_memmapped, }, @@ -4994,13 +5000,14 @@ .block_erase = NULL, }, { .eraseblocks = { {64 * 1024, 8}, }, - .block_erase = erase_block_stm50flw0x0x, + .block_erase = erase_block_82802ab, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_stm50flw0x0x, } }, - .write = write_stm50flw0x0x, + .unlock = unlock_stm50flw0x0x, + .write = write_82802ab, .read = read_memmapped, }, @@ -5028,13 +5035,14 @@ .block_erase = NULL, }, { .eraseblocks = { {64 * 1024, 8}, }, - .block_erase = erase_block_stm50flw0x0x, + .block_erase = erase_block_82802ab, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_stm50flw0x0x, } }, - .write = write_stm50flw0x0x, + .unlock = unlock_stm50flw0x0x, + .write = write_82802ab, .read = read_memmapped, }, @@ -5062,13 +5070,14 @@ .block_erase = NULL, }, { .eraseblocks = { {64 * 1024, 16}, }, - .block_erase = erase_block_stm50flw0x0x, + .block_erase = erase_block_82802ab, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = erase_chip_stm50flw0x0x, } }, - .write = write_stm50flw0x0x, + .unlock = unlock_stm50flw0x0x, + .write = write_82802ab, .read = read_memmapped, }, @@ -5096,13 +5105,14 @@ .block_erase = NULL, }, { .eraseblocks = { {64 * 1024, 16}, }, - .block_erase = erase_block_stm50flw0x0x, + .block_erase = erase_block_82802ab, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = erase_chip_stm50flw0x0x, } }, - .write = write_stm50flw0x0x, + .unlock = unlock_stm50flw0x0x, + .write = write_82802ab, .read = read_memmapped, }, @@ -5127,13 +5137,14 @@ {8 * 1024, 2}, {16 * 1024, 1}, }, - .block_erase = erase_block_stm50flw0x0x, + .block_erase = erase_block_82802ab, }, { .eraseblocks = { {256 * 1024, 1} }, .block_erase = erase_chip_stm50flw0x0x, } }, - .write = write_stm50flw0x0x, + .unlock = unlock_stm50flw0x0x, + .write = write_82802ab, .read = read_memmapped, }, @@ -5153,13 +5164,14 @@ { { .eraseblocks = { {64 * 1024, 32}, }, - .block_erase = erase_block_stm50flw0x0x, + .block_erase = erase_block_82802ab, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = erase_chip_stm50flw0x0x, } }, - .write = write_stm50flw0x0x, + .unlock = unlock_stm50flw0x0x, + .write = write_82802ab, .read = read_memmapped, }, @@ -5172,20 +5184,21 @@ .total_size = 512, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PRW, + .tested = TEST_OK_PR, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (82802ab.c) */ .block_erasers = { { .eraseblocks = { {64 * 1024, 8}, }, - .block_erase = erase_block_stm50flw0x0x, + .block_erase = erase_block_82802ab, }, { .eraseblocks = { {512 * 1024, 1} }, .block_erase = erase_chip_stm50flw0x0x, } }, - .write = write_stm50flw0x0x, + .unlock = unlock_stm50flw0x0x, + .write = write_82802ab, .read = read_memmapped, }, @@ -5198,20 +5211,21 @@ .total_size = 1024, .page_size = 64 * 1024, .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PRW, + .tested = TEST_OK_PR, .probe = probe_82802ab, .probe_timing = TIMING_IGNORED, /* routine don't use probe_timing (82802ab.c) */ .block_erasers = { { .eraseblocks = { {64 * 1024, 16}, }, - .block_erase = erase_block_stm50flw0x0x, + .block_erase = erase_block_82802ab, }, { .eraseblocks = { {1024 * 1024, 1} }, .block_erase = erase_chip_stm50flw0x0x, } }, - .write = write_stm50flw0x0x, + .unlock = unlock_stm50flw0x0x, + .write = write_82802ab, .read = read_memmapped, }, @@ -5237,13 +5251,14 @@ {8 * 1024, 2}, {16 * 1024, 1}, }, - .block_erase = erase_block_stm50flw0x0x, + .block_erase = erase_block_82802ab, }, { .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = erase_chip_stm50flw0x0x, } }, - .write = write_stm50flw0x0x, + .unlock = unlock_stm50flw0x0x, + .write = write_82802ab, .read = read_memmapped, }, Modified: trunk/sharplhf00l04.c ============================================================================== --- trunk/sharplhf00l04.c Wed Mar 17 07:19:23 2010 (r947) +++ trunk/sharplhf00l04.c Fri Mar 19 19:47:06 2010 (r948) @@ -36,7 +36,7 @@ chip_writeb(0x50, bios); printf("Erase at 0x%lx\n", bios); status = wait_82802ab(flash->virtual_memory); - print_82802ab_status(status); + print_status_82802ab(status); // clear write protect printf("write protect is at 0x%lx\n", (wrprotect)); printf("write protect is 0x%x\n", chip_readb(wrprotect)); @@ -49,7 +49,7 @@ programmer_delay(10); // now let's see what the register is status = wait_82802ab(flash->virtual_memory); - print_82802ab_status(status); + print_status_82802ab(status); printf("DONE BLOCK 0x%x\n", blockaddr); if (check_erased_range(flash, blockaddr, blocklen)) { Modified: trunk/stm50flw0x0x.c ============================================================================== --- trunk/stm50flw0x0x.c Wed Mar 17 07:19:23 2010 (r947) +++ trunk/stm50flw0x0x.c Fri Mar 19 19:47:06 2010 (r948) @@ -33,26 +33,6 @@ #include "flashchips.h" #include "chipdrivers.h" -static void wait_stm50flw0x0x(chipaddr bios) -{ - chip_writeb(0x70, bios); - if ((chip_readb(bios) & 0x80) == 0) { // it's busy - while ((chip_readb(bios) & 0x80) == 0) ; - } - - // put another command to get out of status register mode - - chip_writeb(0x90, bios); - programmer_delay(10); - - chip_readb(bios); // Read device ID (to make sure?) - - // this is needed to jam it out of "read id" mode - chip_writeb(0xAA, bios + 0x5555); - chip_writeb(0x55, bios + 0x2AAA); - chip_writeb(0xF0, bios + 0x5555); -} - /* * claus.gindhart(a)kontron.com * The ST M50FLW080B and STM50FLW080B chips have to be unlocked, @@ -101,25 +81,16 @@ return 0; } -int erase_block_stm50flw0x0x(struct flashchip *flash, unsigned int block, unsigned int blocksize) +int unlock_stm50flw0x0x(struct flashchip *flash) { - chipaddr bios = flash->virtual_memory + block; - - // clear status register - chip_writeb(0x50, bios); - printf_debug("Erase at 0x%lx\n", bios); - // now start it - chip_writeb(0x20, bios); - chip_writeb(0xd0, bios); - programmer_delay(10); - - wait_stm50flw0x0x(flash->virtual_memory); + int i; - if (check_erased_range(flash, block, blocksize)) { - fprintf(stderr, "ERASE FAILED!\n"); - return -1; + for (i = 0; i < flash->total_size; i+= flash->page_size) { + if(unlock_block_stm50flw0x0x(flash, i)) { + fprintf(stderr, "UNLOCK FAILED!\n"); + return -1; + } } - printf("DONE BLOCK 0x%x\n", block); return 0; } @@ -136,7 +107,7 @@ chip_writeb(0xd0, bios); programmer_delay(10); - wait_stm50flw0x0x(flash->virtual_memory); + wait_82802ab(flash->virtual_memory); if (check_erased_range(flash, sector, sectorsize)) { fprintf(stderr, "ERASE FAILED!\n"); @@ -147,122 +118,33 @@ return 0; } -int write_page_stm50flw0x0x(chipaddr bios, uint8_t *src, - chipaddr dst, int page_size) -{ - int i, rc = 0; - chipaddr d = dst; - uint8_t *s = src; - - /* transfer data from source to destination */ - for (i = 0; i < page_size; i++) { - chip_writeb(0x40, dst); - chip_writeb(*src++, dst++); - wait_stm50flw0x0x(bios); - } - -/* claus.gindhart(a)kontron.com - * TODO - * I think, that verification is not required, but - * i leave it in anyway - */ - dst = d; - src = s; - for (i = 0; i < page_size; i++) { - if (chip_readb(dst) != *src) { - rc = -1; - break; - } - dst++; - src++; - } - - if (rc) { - fprintf(stderr, " page 0x%lx failed!\n", - (d - bios) / page_size); - } - - return rc; -} - -/* I simply erase block by block - * I Chip This is not the fastest way, but it works - */ -int erase_stm50flw0x0x(struct flashchip *flash) +int erase_chip_stm50flw0x0x(struct flashchip *flash, unsigned int addr, unsigned int blocklen) { int i; int total_size = flash->total_size * 1024; int page_size = flash->page_size; - printf("Erasing page:\n"); - for (i = 0; i < total_size / page_size; i++) { - printf - ("\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b"); - printf("%04d at address: 0x%08x ", i, i * page_size); - if (unlock_block_stm50flw0x0x(flash, i * page_size)) { - fprintf(stderr, "UNLOCK FAILED!\n"); - return -1; - } - if (erase_block_stm50flw0x0x(flash, i * page_size, page_size)) { - fprintf(stderr, "ERASE FAILED!\n"); - return -1; - } - } - printf("\n"); - - return 0; -} - -int erase_chip_stm50flw0x0x(struct flashchip *flash, unsigned int addr, unsigned int blocklen) -{ if ((addr != 0) || (blocklen != flash->total_size * 1024)) { msg_cerr("%s called with incorrect arguments\n", __func__); return -1; } - return erase_stm50flw0x0x(flash); -} - -int write_stm50flw0x0x(struct flashchip *flash, uint8_t * buf) -{ - int i, rc = 0; - int total_size = flash->total_size * 1024; - int page_size = flash->page_size; - chipaddr bios = flash->virtual_memory; - uint8_t *tmpbuf = malloc(page_size); - if (!tmpbuf) { - printf("Could not allocate memory!\n"); - exit(1); - } - printf("Programming page: \n"); - for (i = 0; (i < total_size / page_size) && (rc == 0); i++) { + printf("Erasing page:\n"); + for (i = 0; i < total_size / page_size; i++) { printf ("\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b"); printf("%04d at address: 0x%08x ", i, i * page_size); - - /* Auto Skip Blocks, which already contain the desired data - * Faster, because we only write, what has changed - * More secure, because blocks, which are excluded - * (with the exclude or layout feature) - * are not erased and rewritten; data is retained also - * in sudden power off situations - */ - chip_readn(tmpbuf, bios + i * page_size, page_size); - if (!memcmp((void *)(buf + i * page_size), tmpbuf, page_size)) { - printf("SKIPPED\n"); - continue; + //if (unlock_block_stm50flw0x0x(flash, i * page_size)) { + // fprintf(stderr, "UNLOCK FAILED!\n"); + // return -1; + //} + if (erase_block_82802ab(flash, i * page_size, page_size)) { + fprintf(stderr, "ERASE FAILED!\n"); + return -1; } - - rc = unlock_block_stm50flw0x0x(flash, i * page_size); - if (!rc) - rc = erase_block_stm50flw0x0x(flash, i * page_size, page_size); - if (!rc) - write_page_stm50flw0x0x(bios, buf + i * page_size, - bios + i * page_size, page_size); } printf("\n"); - free(tmpbuf); - return rc; + return 0; }

1 0

Flashrom - DOS version report
by RayeR 19 Mar '10

19 Mar '10

Hello, I tried DOS version of flashrom and have some notes. First I tried it at work on a Dell PC with ATI SB600 chipset but it failed to read flash. Then I tried at home on P31/ICH7 board and works fine, here'e listing of flash process: /This chipset supports the following protocols: SPI. 128,040 Calibrating delay loop... OK. Found chip "Winbond W25x40" (512 KB, SPI) at physical address 0xfff80000. === This flash part has status UNTESTED for operations: ERASE Please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -rV, -wV, -EV), and mention which mainboard or programmer you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Erasing flash before programming... Erasing flash chip... spi_block_erase_20 failed during command execution at address 0x0 SUCCESS. done. Programming page: COMPLETE. Verifying flash... VERIFIED. /It flashed OK but why it displays this? spi_block_erase_20 failed during command execution at address 0x0 Then I looked with trace tool that flashrom makes some strange file operations, see log in attachment. I found it tries to open dmidecode.exe I had it in PATH but when not flashrom hanged for some seconds and displays Bad command or filename about 6 times. Superiotool works on my ITE chip OK. BTW I UPXed it from ~2MB to 80kB :) Martin ARGUS V1.61 - (c) by M. Heilfort, April 1995 Mar, 15 2010 23.10.49 : ------ Start of logging ------ : resident ARGUS occupies 4320 Byte 23.11.00 : change directory : H:\FLASHROM OK 23.11.00 Û run program : C:\WINDOWS\COMMAND.COM /cflashrom.exe PSP = 1B34H:0000H 23.11.00 : open file RO : C:\WINDOWS\COMMAND.COM handle = 6 OK 23.11.00 : close file : handle 6 OK 23.11.00 : open file RO : C:\WINDOWS\COMMAND.COM handle = 6 OK 23.11.00 : close file : handle 6 OK 23.11.00 : close file : handle 5 OK 23.11.00 : close file : handle 6 FAIL ! error 6 : handle unknown 23.11.00 : close file : handle 7 FAIL ! error 6 : handle unknown 23.11.00 : close file : handle 8 FAIL ! error 6 : handle unknown 23.11.00 : close file : handle 9 FAIL ! error 6 : handle unknown 23.11.00 : close file : handle 10 FAIL ! error 6 : handle unknown 23.11.00 : close file : handle 11 FAIL ! error 6 : handle unknown 23.11.00 : close file : handle 12 FAIL ! error 6 : handle unknown 23.11.00 : close file : handle 13 FAIL ! error 6 : handle unknown 23.11.00 : close file : handle 14 FAIL ! error 6 : handle unknown 23.11.00 : close file : handle 15 FAIL ! error 6 : handle unknown 23.11.00 : close file : handle 16 FAIL ! error 6 : handle unknown 23.11.00 : close file : handle 17 FAIL ! error 6 : handle unknown 23.11.00 : close file : handle 18 FAIL ! error 6 : handle unknown 23.11.00 : close file : handle 19 FAIL ! error 6 : handle unknown 23.11.00 : open file RO : C:\WINDOWS\COMMAND.COM handle = 6 OK 23.11.00 : close file : handle 6 OK 23.11.00 : get current directory : H:\FLASHROM OK 23.11.00 Û run program : H:\FLASHROM\FLASHROM.EXE PSP = 1CF6H:0000H 23.11.00 : close file : handle 19 FAIL ! error 6 : handle unknown 23.11.00 : close file : handle 18 FAIL ! error 6 : handle unknown 23.11.00 Û run program : H:\FLASHROM\CWSDPMI.EXE PSP = 2115H:0000H 23.11.00 : open file RO : EMMXXXX0 FAIL ! error 2 : file not found 23.11.00 : close file : handle 0 OK 23.11.00 : close file : handle 1 OK 23.11.00 : close file : handle 3 OK 23.11.00 : close file : handle 4 OK 23.11.00 : close file : handle 2 OK 23.11.00 Û program resident : H:\FLASHROM\CWSDPMI.EXE Code = 0 23.11.00 : open file RO : H:\FLASHROM\FLASHROM.EXE handle = 6 OK 23.11.00 : create file : c:\cwsdpmi.swp handle = 7 OK 23.11.00 : close file : handle 6 OK 23.11.00 : duplicate handle : handle 1 to handle = 6 OK 23.11.00 : close file : handle 1 OK 23.11.00 : open file WO : C:\WINDOWS\TEMP/dj100000 FAIL ! error 2 : file not found 23.11.00 : reset file : C:\WINDOWS\TEMP/dj100000 handle = 1 OK 23.11.00 : get current directory : H:\FLASHROM OK 23.11.00 : get current directory : H:\FLASHROM OK 23.11.00 : get current directory : H:\FLASHROM OK 23.11.00 : get current directory : H:\FLASHROM OK 23.11.00 : get current directory : H:\FLASHROM OK 23.11.00 : get current directory : H:\FLASHROM OK 23.11.00 : get current directory : H:\FLASHROM OK 23.11.00 : get current directory : H:\FLASHROM OK 23.11.00 : get current directory : H:\FLASHROM OK 23.11.00 : get current directory : H:\FLASHROM OK 23.11.00 : get current directory : H:\FLASHROM OK 23.11.00 : get current directory : H:\FLASHROM OK 23.11.00 : get current directory : H:\FLASHROM OK 23.11.00 : get current directory : H:\FLASHROM OK 23.11.00 : get current directory : H:\FLASHROM OK 23.11.00 : get current directory : H:\FLASHROM OK 23.11.00 : flush file : handle 0 OK 23.11.00 : flush file : handle 1 OK 23.11.00 : flush file : handle 2 OK 23.11.00 : flush file : handle 3 OK 23.11.00 : flush file : handle 4 OK 23.11.00 : flush file : handle 5 OK 23.11.00 : flush file : handle 6 OK 23.11.00 : flush file : handle 7 OK 23.11.00 : flush file : handle 8 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 9 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 10 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 11 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 12 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 13 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 14 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 15 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 16 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 17 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 18 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 19 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 20 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 21 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 22 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 23 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 24 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 25 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 26 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 27 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 28 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 29 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 30 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 31 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 32 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 33 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 34 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 35 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 36 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 37 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 38 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 39 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 40 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 41 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 42 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 43 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 44 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 45 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 46 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 47 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 48 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 49 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 50 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 51 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 52 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 53 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 54 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 55 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 56 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 57 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 58 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 59 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 60 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 61 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 62 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 63 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 64 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 65 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 66 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 67 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 68 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 69 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 70 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 71 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 72 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 73 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 74 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 75 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 76 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 77 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 78 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 79 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 80 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 81 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 82 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 83 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 84 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 85 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 86 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 87 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 88 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 89 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 90 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 91 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 92 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 93 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 94 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 95 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 96 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 97 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 98 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle 99 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle100 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle101 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle102 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle103 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle104 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle105 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle106 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle107 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle108 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle109 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle110 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle111 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle112 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle113 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle114 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle115 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle116 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle117 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle118 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle119 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle120 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle121 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle122 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle123 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle124 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle125 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle126 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle127 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle128 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle129 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle130 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle131 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle132 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle133 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle134 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle135 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle136 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle137 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle138 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle139 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle140 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle141 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle142 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle143 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle144 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle145 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle146 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle147 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle148 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle149 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle150 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle151 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle152 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle153 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle154 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle155 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle156 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle157 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle158 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle159 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle160 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle161 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle162 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle163 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle164 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle165 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle166 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle167 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle168 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle169 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle170 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle171 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle172 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle173 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle174 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle175 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle176 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle177 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle178 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle179 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle180 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle181 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle182 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle183 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle184 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle185 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle186 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle187 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle188 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle189 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle190 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle191 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle192 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle193 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle194 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle195 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle196 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle197 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle198 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle199 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle200 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle201 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle202 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle203 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle204 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle205 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle206 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle207 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle208 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle209 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle210 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle211 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle212 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle213 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle214 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle215 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle216 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle217 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle218 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle219 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle220 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle221 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle222 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle223 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle224 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle225 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle226 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle227 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle228 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle229 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle230 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle231 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle232 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle233 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle234 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle235 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle236 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle237 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle238 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle239 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle240 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle241 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle242 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle243 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle244 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle245 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle246 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle247 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle248 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle249 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle250 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle251 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle252 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle253 FAIL ! error 6 : handle unknown 23.11.00 : flush file : handle254 FAIL ! error 6 : handle unknown 23.11.00 Û run program : C:\WINDOWS\COMMAND.COM /c dmidecode -s system-manufacturer PSP = 540FH:0000H 23.11.00 : open file RO : C:\WINDOWS\COMMAND.COM handle = 8 OK 23.11.00 : close file : handle 8 OK 23.11.00 : open file RO : C:\WINDOWS\COMMAND.COM handle = 8 OK 23.11.00 : close file : handle 8 OK 23.11.06 : close file : handle 5 OK 23.11.06 : close file : handle 6 FAIL ! error 6 : handle unknown 23.11.06 : close file : handle 7 FAIL ! error 6 : handle unknown 23.11.06 : close file : handle 8 FAIL ! error 6 : handle unknown 23.11.06 : close file : handle 9 FAIL ! error 6 : handle unknown 23.11.06 : close file : handle 10 FAIL ! error 6 : handle unknown 23.11.06 : close file : handle 11 FAIL ! error 6 : handle unknown 23.11.06 : close file : handle 12 FAIL ! error 6 : handle unknown 23.11.06 : close file : handle 13 FAIL ! error 6 : handle unknown 23.11.06 : close file : handle 14 FAIL ! error 6 : handle unknown 23.11.06 : close file : handle 15 FAIL ! error 6 : handle unknown 23.11.06 : close file : handle 16 FAIL ! error 6 : handle unknown 23.11.06 : close file : handle 17 FAIL ! error 6 : handle unknown 23.11.06 : close file : handle 18 FAIL ! error 6 : handle unknown 23.11.06 : close file : handle 19 FAIL ! error 6 : handle unknown 23.11.06 Û exit program : Code = 0 23.11.06 : get current directory : H:\FLASHROM OK 23.11.06 : change directory : H:\FLASHROM OK 23.11.06 : get current directory : H:\FLASHROM OK 23.11.06 : --------- E N D ---------

2 1

[PATCH] fwhub minimal cleanup/consolidation
by Sean Nelson 19 Mar '10

19 Mar '10

see patch.

2 3

Call for updates in distributions: Fedora
by Carl-Daniel Hailfinger 18 Mar '10

18 Mar '10

Hi Peter, it seems Fedora is carrying flashrom 0.9.1-r893. Thanks for keeping that package up to date. Unfortunately, this revision has a few really evil bugs and some minor annoyances. It would be highly appreciated if you could update to r930. Here is a list of revisions with bugfixes so you have a short doc to prove that a flashrom update would be beneficial even during freeze times: * r894 improves reliability of SPI flashing on all Intel chipsets * r896 fixes broken DMI mainboard matching (affects a few boards) * r897 fixes erase of Winbond W25X{10,20,40,80}chips * r899 reduces the number of incorrectly detected SPI chips * r902 adds a helpful message for recent Nvidia chipsets * r907 fixes breakage for half a dozen chips (Pm49fl002, Pm49fl004, SST49LF160C, W39V080FA, W39V080FA_dual, W39V040C) * r910 fixes GPO access on Intel PIIX4 * r913 fixes an incorrectly shadowed variable * r916 detects Laptops and warns users in that case (Important!) * r919 makes sure only tested mainboard code is run automatically * r922 improves man page readability * r930 fixes a NULL pointer bug which was triggered on a huge number of boards * A sizable number of mainboards are now recognized Some new features got added since r893, but they are all default off and compiled out, so the number of added bugs should be zero. Regards, Carl-Daniel

3 4

Board enable for P4C800-E
by Michael Karcher 17 Mar '10

17 Mar '10

Tested on real hardware - works. Regards, Michael Karcher

2 2

[commit] r947 - trunk
by repository service 17 Mar '10

17 Mar '10

Author: mkarcher Date: Wed Mar 17 07:19:23 2010 New Revision: 947 URL: http://flashrom.org/trac/coreboot/changeset/947 Log: Add board enable for P4C800-E lspci/flashrom/superiotool at http://www.coreboot.org/pipermail/flashrom/2010-March/002579.html Signed-off-by: Michael Karcher <flashrom(a)mkarcher.dialup.fu-berlin.de> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/board_enable.c trunk/print_wiki.c Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Wed Mar 17 01:47:56 2010 (r946) +++ trunk/board_enable.c Wed Mar 17 07:19:23 2010 (r947) @@ -914,6 +914,7 @@ /** * Suited for: * - Asus P4B266LM (Sony Vaio PCV-RX650): socket478 + 845D + ICH2. + * - Asus P4C800-E Deluxe: socket478 + 875P + ICH5. * - Asus P4P800-E Deluxe: Intel socket478 + 865PE + ICH5R. */ static int intel_ich_gpio21_raise(const char *name) @@ -1277,6 +1278,7 @@ {0x1106, 0x1336, 0x1043, 0x80ed, 0x1106, 0x3288, 0x1043, 0x8249, NULL, NULL, NULL, "ASUS", "M2V-MX", 0, OK, via_vt823x_gpio5_raise}, {0x8086, 0x1a30, 0x1043, 0x8070, 0x8086, 0x244b, 0x1043, 0x8028, NULL, NULL, NULL, "ASUS", "P4B266", 0, OK, intel_ich_gpio22_raise}, {0x8086, 0x1A30, 0x1043, 0x8025, 0x8086, 0x244B, 0x104D, 0x80F0, NULL, NULL, NULL, "ASUS", "P4B266-LM", 0, OK, intel_ich_gpio21_raise}, + {0x8086, 0x24D3, 0x1043, 0x80A6, 0x8086, 0x2578, 0x1043, 0x80F6, NULL, NULL, NULL, "ASUS", "P4C800-E Deluxe", 0, OK, intel_ich_gpio21_raise}, {0x8086, 0x2570, 0x1043, 0x80F2, 0x105A, 0x3373, 0x1043, 0x80F5, NULL, NULL, NULL, "ASUS", "P4P800-E Deluxe", 0, OK, intel_ich_gpio21_raise}, {0x10B9, 0x1541, 0, 0, 0x10B9, 0x1533, 0, 0, "^P5A$", "asus", "p5a", "ASUS", "P5A", 0, OK, board_asus_p5a}, {0x10DE, 0x0030, 0x1043, 0x818a, 0x8086, 0x100E, 0x1043, 0x80EE, NULL, NULL, NULL, "ASUS", "P5ND2-SLI Deluxe", 0, OK, nvidia_mcp_gpio10_raise}, Modified: trunk/print_wiki.c ============================================================================== --- trunk/print_wiki.c Wed Mar 17 01:47:56 2010 (r946) +++ trunk/print_wiki.c Wed Mar 17 07:19:23 2010 (r947) @@ -213,6 +213,7 @@ { "ASUS", "A7V8X-MX SE", "http://www.asus.com/product.aspx?P_ID=1guVBT1qV5oqhHyZ" }, { "ASUS", "A7V8X-X", "http://www.asus.com/product.aspx?P_ID=YcXfRrWHZ9RKoVmw" }, { "ASUS", "P4B266", "http://www.ciao.co.uk/ASUS_Intel_845D_Chipset_P4B266__5409807#productdetail" }, + { "ASUS", "P4C800-E Deluxe", "http://www.asus.com/product.aspx?P_ID=cFuVCr9bXXCckmcK" }, { "ASUS", "P4P800-E Deluxe", "http://www.asus.com/product.aspx?P_ID=INIJUvLlif7LHp3g" }, { "ASUS", "P5ND2-SLI Deluxe", "http://www.asus.com/product.aspx?P_ID=WY7XroDuUImVbgp5" }, { "ASUS", "P5A", "ftp://ftp.asus.com.tw/pub/ASUS/mb/sock7/ali/p5a/" },

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom