Author: stefanct
Date: Thu May 26 15:30:51 2011
New Revision: 1319
URL: http://flashrom.org/trac/flashrom/changeset/1319
Log:
ichspi: fix detection of unused regions
Signed-off-by: Joshua Roys <roysjosh(a)gmail.com>
Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
Modified:
trunk/ichspi.c
Modified: trunk/ichspi.c
==============================================================================
--- trunk/ichspi.c Thu May 26 03:35:19 2011 (r1318)
+++ trunk/ichspi.c Thu May 26 15:30:51 2011 (r1319)
@@ -1045,7 +1045,7 @@
base = ICH_FREG_BASE(freg);
limit = ICH_FREG_LIMIT(freg);
- if (base == 0x1fff && limit == 0) {
+ if (base > limit) {
/* this FREG is disabled */
msg_pdbg("%s region is unused.\n", region_names[i]);
return;
1
0
flashrom v0.9.3-r1205 on Linux 2.6.18-238.9.1.el5 (x86_64), built with
libpci 3.1.7, GCC 4.1.2 20080704 (Red Hat 4.1.2-50), little endian
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OS timer resolution is 1 usecs, 790M loops per
second, 10 myus = 10 us, 100 myus = 99 us, 1000 myus = 1037 us, 10000 myus =
9973 us, 4 myus = 4 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "Acer"
DMI string system-product-name: "Aspire R1600"
DMI string system-version: " "
DMI string baseboard-manufacturer: "Acer"
DMI string baseboard-product-name: "FMCP7A-ION"
DMI string baseboard-version: " "
DMI string chassis-type: "Desktop"
Found chipset "NVIDIA MCP79", enabling flash write... chipset PCI ID is
10de:0aad, This chipset is not really supported yet. Guesswork...
ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0
Flash bus type is SPI
Found SMBus device 10de:0aa2 at 00:03:2
MCP SPI BAR is at 0xfae80000
SPI control is 0xc052, req=0, gnt=0
Please send the output of "flashrom -V" to flashrom(a)flashrom.org with
your board name: flashrom -V as the subject to help us finish support for
your
chipset. Thanks.
OK.
This chipset supports the following protocols: SPI.
Probing for AMD Am29F010A/B, 128 KB: skipped.
Probing for AMD Am29F002(N)BB, 256 KB: skipped.
Probing for AMD Am29F002(N)BT, 256 KB: skipped.
Probing for AMD Am29F016D, 2048 KB: skipped.
Probing for AMD Am29F040B, 512 KB: skipped.
Probing for AMD Am29F080B, 1024 KB: skipped.
Probing for AMD Am29LV040B, 512 KB: skipped.
Probing for AMD Am29LV081B, 1024 KB: skipped.
Probing for AMIC A25L05PT, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L05PU, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L10PT, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L10PU, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L20PT, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L20PU, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L80P, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L16PT, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L16PU, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L512, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L010, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L020, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L040, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L080, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L016, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25L032, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A25LQ032, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for AMIC A29002B, 256 KB: skipped.
Probing for AMIC A29002T, 256 KB: skipped.
Probing for AMIC A29040B, 512 KB: skipped.
Probing for AMIC A49LF040A, 512 KB: skipped.
Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25DQ161, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT29C512, 64 KB: skipped.
Probing for Atmel AT29C010A, 128 KB: skipped.
Probing for Atmel AT29C020, 256 KB: skipped.
Probing for Atmel AT29C040A, 512 KB: skipped.
Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Atmel AT49BV512, 64 KB: skipped.
Probing for Atmel AT49F020, 256 KB: skipped.
Probing for Atmel AT49F002(N), 256 KB: skipped.
Probing for Atmel AT49F002(N)T, 256 KB: skipped.
Probing for Bright BM29F040, 512 KB: skipped.
Probing for EMST F49B002UA, 256 KB: skipped.
Probing for EMST F25L008A, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Eon EN29F010, 128 KB: skipped.
Probing for Eon EN29F002(A)(N)B, 256 KB: skipped.
Probing for Eon EN29F002(A)(N)T, 256 KB: skipped.
Probing for Fujitsu MBM29F004BC, 512 KB: skipped.
Probing for Fujitsu MBM29F004TC, 512 KB: skipped.
Probing for Fujitsu MBM29F400BC, 512 KB: skipped.
Probing for Fujitsu MBM29F400TC, 512 KB: skipped.
Probing for Hyundai HY29F002T, 256 KB: skipped.
Probing for Hyundai HY29F002B, 256 KB: skipped.
Probing for Hyundai HY29F040A, 512 KB: skipped.
Probing for Intel 28F001BN/BX-B, 128 KB: skipped.
Probing for Intel 28F001BN/BX-T, 128 KB: skipped.
Probing for Intel 28F002BC/BL/BV/BX-T, 256 KB: skipped.
Probing for Intel 28F008S3/S5/SC, 512 KB: skipped.
Probing for Intel 28F004B5/BE/BV/BX-B, 512 KB: skipped.
Probing for Intel 28F004B5/BE/BV/BX-T, 512 KB: skipped.
Probing for Intel 28F400BV/BX/CE/CV-B, 512 KB: skipped.
Probing for Intel 28F400BV/BX/CE/CV-T, 512 KB: skipped.
Probing for Intel 82802AB, 512 KB: skipped.
Probing for Intel 82802AC, 1024 KB: skipped.
Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Chip status register is 00
Chip status register: Status Register Write Disable (SRWD) is not set
Chip status register: Bit 6 is not set
Chip status register: Bit 5 / Block Protect 3 (BP3) is not set
Chip status register: Bit 4 / Block Protect 2 (BP2) is not set
Chip status register: Bit 3 / Block Protect 1 (BP1) is not set
Chip status register: Bit 2 / Block Protect 0 (BP0) is not set
Chip status register: Write Enable Latch (WEL) is not set
Chip status register: Write In Progress (WIP/BUSY) is not set
Found chip "Macronix MX25L8005" (1024 KB, SPI) at physical address
0xfff00000.
Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Macronix MX25L1635E, 2048 KB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Macronix MX29F001B, 128 KB: skipped.
Probing for Macronix MX29F001T, 128 KB: skipped.
Probing for Macronix MX29F002B, 256 KB: skipped.
Probing for Macronix MX29F002T, 256 KB: skipped.
Probing for Macronix MX29F040, 512 KB: skipped.
Probing for Macronix MX29LV040, 512 KB: skipped.
Probing for MoselVitelic V29C51000B, 64 KB: skipped.
Probing for MoselVitelic V29C51000T, 64 KB: skipped.
Probing for MoselVitelic V29C51400B, 512 KB: skipped.
Probing for MoselVitelic V29C51400T, 512 KB: skipped.
Probing for MoselVitelic V29LC51000, 64 KB: skipped.
Probing for MoselVitelic V29LC51001, 128 KB: skipped.
Probing for MoselVitelic V29LC51002, 256 KB: skipped.
Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for PMC Pm29F002T, 256 KB: skipped.
Probing for PMC Pm29F002B, 256 KB: skipped.
Probing for PMC Pm39LV010, 128 KB: skipped.
Probing for PMC Pm39LV020, 256 KB: skipped.
Probing for PMC Pm39LV040, 512 KB: skipped.
Probing for PMC Pm49FL002, 256 KB: skipped.
Probing for PMC Pm49FL004, 512 KB: skipped.
Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Sharp LHF00L04, 1024 KB: skipped.
Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for SST SST25VF064C, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0xc2, id2 0x13
Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for SST SST25LF040A.RES, 512 KB: probe_spi_res2: id1 0x13, id2 0x13
Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0xc2, id2 0x13
Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for SST SST28SF040A, 512 KB: skipped.
Probing for SST SST29EE010, 128 KB: skipped.
Probing for SST SST29LE010, 128 KB: skipped.
Probing for SST SST29EE020A, 256 KB: skipped.
Probing for SST SST29LE020, 256 KB: skipped.
Probing for SST SST39SF512, 64 KB: skipped.
Probing for SST SST39SF010A, 128 KB: skipped.
Probing for SST SST39SF020A, 256 KB: skipped.
Probing for SST SST39SF040, 512 KB: skipped.
Probing for SST SST39VF512, 64 KB: skipped.
Probing for SST SST39VF010, 128 KB: skipped.
Probing for SST SST39VF020, 256 KB: skipped.
Probing for SST SST39VF040, 512 KB: skipped.
Probing for SST SST39VF080, 1024 KB: skipped.
Probing for SST SST49LF002A/B, 256 KB: skipped.
Probing for SST SST49LF003A/B, 384 KB: skipped.
Probing for SST SST49LF004A/B, 512 KB: skipped.
Probing for SST SST49LF004C, 512 KB: skipped.
Probing for SST SST49LF008A, 1024 KB: skipped.
Probing for SST SST49LF008C, 1024 KB: skipped.
Probing for SST SST49LF016C, 2048 KB: skipped.
Probing for SST SST49LF020, 256 KB: skipped.
Probing for SST SST49LF020A, 256 KB: skipped.
Probing for SST SST49LF040, 512 KB: skipped.
Probing for SST SST49LF040B, 512 KB: skipped.
Probing for SST SST49LF080A, 1024 KB: skipped.
Probing for SST SST49LF160C, 2048 KB: skipped.
Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID.
Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID.
Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID.
Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for ST M25PX32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for ST M25PX64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for ST M29F002B, 256 KB: skipped.
Probing for ST M29F002T/NT, 256 KB: skipped.
Probing for ST M29F040B, 512 KB: skipped.
Probing for ST M29F400BB, 512 KB: skipped.
Probing for ST M29F400BT, 512 KB: skipped.
Probing for ST M29W010B, 128 KB: skipped.
Probing for ST M29W040B, 512 KB: skipped.
Probing for ST M29W512B, 64 KB: skipped.
Probing for ST M50FLW040A, 512 KB: skipped.
Probing for ST M50FLW040B, 512 KB: skipped.
Probing for ST M50FLW080A, 1024 KB: skipped.
Probing for ST M50FLW080B, 1024 KB: skipped.
Probing for ST M50FW002, 256 KB: skipped.
Probing for ST M50FW016, 2048 KB: skipped.
Probing for ST M50FW040, 512 KB: skipped.
Probing for ST M50FW080, 1024 KB: skipped.
Probing for ST M50LPW116, 2048 KB: skipped.
Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 KB: skipped.
Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 KB: skipped.
Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 KB: skipped.
Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 KB: skipped.
Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 KB: skipped.
Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 KB: skipped.
Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 KB: skipped.
Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 KB: skipped.
Probing for TI TMS29F002RB, 256 KB: skipped.
Probing for TI TMS29F002RT, 256 KB: skipped.
Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25Q64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2014
Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped.
Probing for Winbond W29C020(C)/W29C022, 256 KB: skipped.
Probing for Winbond W29C040/P, 512 KB: skipped.
Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 KB: skipped.
Probing for Winbond W39V040A, 512 KB: skipped.
Probing for Winbond W39V040(F)B, 512 KB: skipped.
Probing for Winbond W39V040(F)C, 512 KB: skipped.
Probing for Winbond W39V040FA, 512 KB: skipped.
Probing for Winbond W39V080A, 1024 KB: skipped.
Probing for Winbond W49F002U/N, 256 KB: skipped.
Probing for Winbond W49F020, 256 KB: skipped.
Probing for Winbond W49V002A, 256 KB: skipped.
Probing for Winbond W49V002FA, 256 KB: skipped.
Probing for Winbond W39V080FA, 1024 KB: skipped.
Probing for Winbond W39V080FA (dual mode), 512 KB: skipped.
Probing for AMIC unknown AMIC SPI chip, 0 KB: probe_spi_rdid_generic: id1
0xc2, id2 0x2014
Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1
0xc2, id2 0x2014
Probing for Eon unknown Eon SPI chip, 0 KB: probe_spi_rdid_generic: id1
0xc2, id2 0x2014
Probing for Macronix unknown Macronix SPI chip, 0 KB:
probe_spi_rdid_generic: id1 0xc2, id2 0x2014
Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1
0xc2, id2 0x2014
Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1
0xc2, id2 0x2014
Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0xc2,
id2 0x2014
Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1
0xc2, id2 0x2014
Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic:
id1 0xc2, id2 0x2014
Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0xc2,
id2 0x13
No operations were specified.
If I discombobulate the matter replicator attached to the proton-magnetic
accelerator while the neutrino anti-matter graviton at Warp 9, synthesizes
the synergy of the combined spectral waves and the space-time-continuum
monitor reaches critical mass while the boson particles are firing and
gravity reversal generators are at peak speed, will this disintegrate the
black hole particle shield and make my data invisible?
1
0
Re: [flashrom] [PATCH] eliminate magic numbers indicating maximum column sizes in print_supported_chipsets and print_supported_boards_helper
by Carl-Daniel Hailfinger 26 May '11
by Carl-Daniel Hailfinger 26 May '11
26 May '11
Am 24.05.2011 02:21 schrieb Stefan Tauner:
> without this the magic numbers need to be kept in sync with the maximum length of the
> strings printed in the corresponding column. if not an overflow and a nasty ' '-storm occurs
> on executing flashrom -L.
>
> Signed-off-by: Stefan Tauner<stefan.tauner(a)student.tuwien.ac.at>
> ---
>
> after a short discussion with carldani i have removed the assert stuff and
> do some inferior array checking in selfcheck.
IMHO assert should be avoided because it is the equivalent of crashing
(no cleanup, no graceful error handling). Assert is OK if memory
corruption or a similar problem has been detected and you just want to
abort as quickly as possible without any cleanup to inimize further damage.
> we only have _extern_
> references to the tables to sizeof does not work. we could add a "getter"
> for the sizes of the array or bring the tables into view to improve this...
> but i dont think it's worth it.
>
> flashrom.c | 22 +++++++++++++
> print.c | 96 ++++++++++++++++++++++++++++++++++++++-------------------
> programmer.h | 8 ++--
> 3 files changed, 90 insertions(+), 36 deletions(-)
>
> diff --git a/flashrom.c b/flashrom.c
> index 46c9ecd..821d745 100644
> --- a/flashrom.c
> +++ b/flashrom.c
> @@ -1709,6 +1709,28 @@ int selfcheck(void)
> msg_gerr("Programmer table miscompilation!\n");
> ret = 1;
> }
> + /* It would be favorable if we could also check for correct terminaion
> + * of the follwing arrays, but we don't know their size in here... */
> + if (flashchips == NULL || flashchips[0].vendor == NULL) {
> + msg_gerr("Flashchips table miscompilation!\n");
> + ret = 1;
> + }
>
The code below is internal-only. Please make sure it still compiles with
# make CONFIG_INTERNAL=no
That usually means wrapping in #if CONFIG_INTERNAL == 1
> + if (chipset_enables == NULL || chipset_enables[0].vendor_name == NULL) {
> + msg_gerr("Chipset enables table miscompilation!\n");
> + ret = 1;
> + }
>
chipset_enables[0].vendor_name==NULL is a valid case if someone wants to
run a minimal flashrom on a machine which does not need a chipset enable.
> + if (board_pciid_enables == NULL || board_pciid_enables[0].vendor_name == NULL) {
> + msg_gerr("Board enables table miscompilation!\n");
> + ret = 1;
> + }
>
board_pciid_enables[0].vendor_name == NULL is a valid case for minimal
flashrom on a board which does not need a board enable.
> + if (boards_known == NULL || boards_known[0].vendor == NULL) {
> + msg_gerr("Known boards table miscompilation!\n");
> + ret = 1;
> + }
>
Same here if someone does not care about --list-supported output at all
(e.g. in embedded usage).
> + if (laptops_known == NULL || laptops_known[0].vendor == NULL) {
> + msg_gerr("Known laptops table miscompilation!\n");
> + ret = 1;
> + }
>
Dito.
The tests for NULL pointers of chipset_enables etc. make a lot of sense,
but the size checks only make sense if you know the array size from
elsewhere and if you want to check that the array size matches the size
an array walker (loop until ->somemember==NULL) would see. That means
the selfcheck function would have to live in the same file as the array
or you use another global variable which holds sizeof(array).
Put #endif here.
> for (flash = flashchips; flash&& flash->name; flash++)
> if (selfcheck_eraseblocks(flash))
> ret = 1;
> diff --git a/print.c b/print.c
> index e84a417..b0f8247 100644
> --- a/print.c
> +++ b/print.c
> @@ -77,7 +77,8 @@ static int digits(int n)
> static void print_supported_chips(void)
> {
> int okcol = 0, pos = 0, i, chipcount = 0;
> - int maxchiplen = 0, maxvendorlen = 0;
> + int maxvendorlen = strlen("Vendor") + 1;
> + int maxchiplen = strlen("Device") + 1;
> const struct flashchip *f;
>
> for (f = flashchips; f->name != NULL; f++) {
> @@ -158,63 +159,94 @@ static void print_supported_chips(void)
> #if CONFIG_INTERNAL == 1
> static void print_supported_chipsets(void)
> {
> - int i, j, chipsetcount = 0;
> + int i, chipsetcount = 0;
> const struct penable *c = chipset_enables;
> + int maxvendorlen = strlen("Vendor") + 1;
> + int maxchipsetlen = strlen("Chipset") + 1;
>
> - for (i = 0; c[i].vendor_name != NULL; i++)
> + for (c = chipset_enables; c->vendor_name != NULL; c++) {
> chipsetcount++;
> + maxvendorlen = max(maxvendorlen, strlen(c->vendor_name));
> + maxchipsetlen = max(maxchipsetlen, strlen(c->device_name));
> + }
> + maxvendorlen++;
> + maxchipsetlen++;
> +
> + printf("\nSupported chipsets (total: %d):\n\n", chipsetcount);
>
Not your fault, but I think the \n at the beginning here is really ugly.
It should live in the caller.
> +
> + printf("Vendor");
> + for (i = strlen("Vendor"); i< maxvendorlen; i++)
> + printf(" ");
> +
> + printf("Chipset");
> + for (i = strlen("Chipset"); i< maxchipsetlen; i++)
> + printf(" ");
>
> - printf("\nSupported chipsets (total: %d):\n\nVendor: "
> - "Chipset: PCI IDs:\n\n", chipsetcount);
> + printf("PCI IDs State\n\n");
>
> - for (i = 0; c[i].vendor_name != NULL; i++) {
> - printf("%s", c[i].vendor_name);
> - for (j = 0; j< 25 - strlen(c[i].vendor_name); j++)
> + for (c = chipset_enables; c->vendor_name != NULL; c++) {
> + printf("%s", c->vendor_name);
> + for (i = 0; i< maxvendorlen - strlen(c->vendor_name); i++)
> printf(" ");
> - printf("%s", c[i].device_name);
> - for (j = 0; j< 25 - strlen(c[i].device_name); j++)
> + printf("%s", c->device_name);
> + for (i = 0; i< maxchipsetlen - strlen(c->device_name); i++)
> printf(" ");
> - printf("%04x:%04x%s\n", c[i].vendor_id, c[i].device_id,
> - (c[i].status == OK) ? "" : " (untested)");
> + printf("%04x:%04x%s\n", c->vendor_id, c->device_id,
> + (c->status == OK) ? "" : " (untested)");
> }
> }
>
> static void print_supported_boards_helper(const struct board_info *boards,
> const char *devicetype)
> {
> - int i, j, boardcount_good = 0, boardcount_bad = 0;
> - const struct board_pciid_enable *b = board_pciid_enables;
> -
> - for (i = 0; boards[i].vendor != NULL; i++) {
> - if (boards[i].working)
> + int i, boardcount_good = 0, boardcount_bad = 0;
> + const struct board_pciid_enable *e = board_pciid_enables;
> + const struct board_info *b = boards;
> + int maxvendorlen = strlen("Vendor") + 1;
> + int maxboardlen = strlen("Board") + 1;
> +
> + for (b = boards; b->vendor != NULL; b++) {
> + maxvendorlen = max(maxvendorlen, strlen(b->vendor));
> + maxboardlen = max(maxboardlen, strlen(b->name));
> + if (b->working)
> boardcount_good++;
> else
> boardcount_bad++;
> }
> + maxvendorlen++;
> + maxboardlen++;
> +
> + printf("\nKnown %s (good: %d, bad: %d):\n\n",
> + devicetype, boardcount_good, boardcount_bad);
>
Not your fault, but I think the \n at the beginning here is really ugly.
It should live in the caller.
> +
> + printf("Vendor");
> + for (i = strlen("Vendor"); i< maxvendorlen; i++)
> + printf(" ");
> +
> + printf("Board");
> + for (i = strlen("Board"); i< maxboardlen; i++)
> + printf(" ");
>
> - printf("\nKnown %s (good: %d, bad: %d):"
> - "\n\nVendor: Board: "
> - "Status: Required option:"
> - "\n\n", devicetype, boardcount_good, boardcount_bad);
> + printf("Status Required option\n\n");
>
> - for (i = 0; boards[i].vendor != NULL; i++) {
> - printf("%s", boards[i].vendor);
> - for (j = 0; j< 25 - strlen(boards[i].vendor); j++)
> + for (b = boards; b->vendor != NULL; b++) {
> + printf("%s", b->vendor);
> + for (i = 0; i< maxvendorlen - strlen(b->vendor); i++)
> printf(" ");
> - printf("%s", boards[i].name);
> - for (j = 0; j< 28 - strlen(boards[i].name); j++)
> + printf("%s", b->name);
> + for (i = 0; i< maxboardlen - strlen(b->name); i++)
> printf(" ");
> - printf((boards[i].working) ? "OK " : "BAD ");
> + printf((b->working) ? "OK " : "BAD ");
>
> - for (j = 0; b[j].vendor_name != NULL; j++) {
> - if (strcmp(b[j].vendor_name, boards[i].vendor)
> - || strcmp(b[j].board_name, boards[i].name))
> + for (e = board_pciid_enables; e->vendor_name != NULL; e++) {
> + if (strcmp(e->vendor_name, b->vendor)
> + || strcmp(e->board_name, b->name))
> continue;
> - if (b[j].lb_vendor == NULL)
> + if (e->lb_vendor == NULL)
> printf("(autodetected)");
> else
> - printf("-m %s:%s", b[j].lb_vendor,
> - b[j].lb_part);
> + printf("-m %s:%s", e->lb_vendor,
> + e->lb_part);
> }
> printf("\n");
> }
> diff --git a/programmer.h b/programmer.h
> index b68aa88..e1147f1 100644
> --- a/programmer.h
> +++ b/programmer.h
> @@ -145,7 +145,7 @@ struct bitbang_spi_master {
> struct penable {
> uint16_t vendor_id;
> uint16_t device_id;
> - int status;
> + int status; /* OK=0 and NT=1 are defines only. Beware! */
>
Do we want an enum instead?
> const char *vendor_name;
> const char *device_name;
> int (*doit) (struct pci_dev *dev, const char *name);
> @@ -174,10 +174,10 @@ struct board_pciid_enable {
> uint16_t second_card_vendor;
> uint16_t second_card_device;
>
> - /* Pattern to match DMI entries */
> + /* Pattern to match DMI entries. May be NULL. */
> const char *dmi_pattern;
>
> - /* The vendor / part name from the coreboot table. */
> + /* The vendor / part name from the coreboot table. May be NULL. */
> const char *lb_vendor;
> const char *lb_part;
>
> @@ -188,7 +188,7 @@ struct board_pciid_enable {
>
> int max_rom_decode_parallel;
> int status;
> - int (*enable) (void);
> + int (*enable) (void); /* May be NULL. */
> };
>
> extern const struct board_pciid_enable board_pciid_enables[];
>
Looks good otherwise.
Regards,
Carl-Daniel
--
http://www.hailfinger.org/
2
3
Author: stefanct
Date: Thu May 26 03:35:19 2011
New Revision: 1318
URL: http://flashrom.org/trac/flashrom/changeset/1318
Log:
eliminate magic numbers indicating maximum column sizes in print_supported_chipsets and print_supported_boards_helper
without this the magic numbers need to be kept in sync with the maximum length of the
strings printed in the corresponding column. if not, an overflow and a nasty ' '-storm occur
on executing flashrom -L.
Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
Modified:
trunk/flashrom.c
trunk/print.c
trunk/programmer.h
Modified: trunk/flashrom.c
==============================================================================
--- trunk/flashrom.c Thu May 19 04:58:17 2011 (r1317)
+++ trunk/flashrom.c Thu May 26 03:35:19 2011 (r1318)
@@ -1709,9 +1709,37 @@
msg_gerr("Programmer table miscompilation!\n");
ret = 1;
}
+ /* It would be favorable if we could also check for correct terminaion
+ * of the follwing arrays, but we don't know their size in here...
+ * For 'flashchips' we check the first element to be non-null. In the
+ * other cases there exist use cases where the first element can be
+ * null. */
+ if (flashchips == NULL || flashchips[0].vendor == NULL) {
+ msg_gerr("Flashchips table miscompilation!\n");
+ ret = 1;
+ }
for (flash = flashchips; flash && flash->name; flash++)
if (selfcheck_eraseblocks(flash))
ret = 1;
+
+#if CONFIG_INTERNAL == 1
+ if (chipset_enables == NULL) {
+ msg_gerr("Chipset enables table does not exist!\n");
+ ret = 1;
+ }
+ if (board_pciid_enables == NULL) {
+ msg_gerr("Board enables table does not exist!\n");
+ ret = 1;
+ }
+ if (boards_known == NULL) {
+ msg_gerr("Known boards table does not exist!\n");
+ ret = 1;
+ }
+ if (laptops_known == NULL) {
+ msg_gerr("Known laptops table does not exist!\n");
+ ret = 1;
+ }
+#endif // CONFIG_INTERNAL == 1
return ret;
}
Modified: trunk/print.c
==============================================================================
--- trunk/print.c Thu May 19 04:58:17 2011 (r1317)
+++ trunk/print.c Thu May 26 03:35:19 2011 (r1318)
@@ -77,7 +77,8 @@
static void print_supported_chips(void)
{
int okcol = 0, pos = 0, i, chipcount = 0;
- int maxchiplen = 0, maxvendorlen = 0;
+ int maxvendorlen = strlen("Vendor") + 1;
+ int maxchiplen = strlen("Device") + 1;
const struct flashchip *f;
for (f = flashchips; f->name != NULL; f++) {
@@ -92,7 +93,7 @@
maxchiplen++;
okcol = maxvendorlen + maxchiplen;
- printf("\nSupported flash chips (total: %d):\n\n", chipcount);
+ printf("Supported flash chips (total: %d):\n\n", chipcount);
printf("Vendor");
for (i = strlen("Vendor"); i < maxvendorlen; i++)
printf(" ");
@@ -158,63 +159,94 @@
#if CONFIG_INTERNAL == 1
static void print_supported_chipsets(void)
{
- int i, j, chipsetcount = 0;
+ int i, chipsetcount = 0;
const struct penable *c = chipset_enables;
+ int maxvendorlen = strlen("Vendor") + 1;
+ int maxchipsetlen = strlen("Chipset") + 1;
- for (i = 0; c[i].vendor_name != NULL; i++)
+ for (c = chipset_enables; c->vendor_name != NULL; c++) {
chipsetcount++;
+ maxvendorlen = max(maxvendorlen, strlen(c->vendor_name));
+ maxchipsetlen = max(maxchipsetlen, strlen(c->device_name));
+ }
+ maxvendorlen++;
+ maxchipsetlen++;
+
+ printf("Supported chipsets (total: %d):\n\n", chipsetcount);
- printf("\nSupported chipsets (total: %d):\n\nVendor: "
- "Chipset: PCI IDs:\n\n", chipsetcount);
+ printf("Vendor");
+ for (i = strlen("Vendor"); i < maxvendorlen; i++)
+ printf(" ");
- for (i = 0; c[i].vendor_name != NULL; i++) {
- printf("%s", c[i].vendor_name);
- for (j = 0; j < 25 - strlen(c[i].vendor_name); j++)
+ printf("Chipset");
+ for (i = strlen("Chipset"); i < maxchipsetlen; i++)
+ printf(" ");
+
+ printf("PCI IDs State\n\n");
+
+ for (c = chipset_enables; c->vendor_name != NULL; c++) {
+ printf("%s", c->vendor_name);
+ for (i = 0; i < maxvendorlen - strlen(c->vendor_name); i++)
printf(" ");
- printf("%s", c[i].device_name);
- for (j = 0; j < 25 - strlen(c[i].device_name); j++)
+ printf("%s", c->device_name);
+ for (i = 0; i < maxchipsetlen - strlen(c->device_name); i++)
printf(" ");
- printf("%04x:%04x%s\n", c[i].vendor_id, c[i].device_id,
- (c[i].status == OK) ? "" : " (untested)");
+ printf("%04x:%04x%s\n", c->vendor_id, c->device_id,
+ (c->status == OK) ? "" : " (untested)");
}
}
static void print_supported_boards_helper(const struct board_info *boards,
const char *devicetype)
{
- int i, j, boardcount_good = 0, boardcount_bad = 0;
- const struct board_pciid_enable *b = board_pciid_enables;
-
- for (i = 0; boards[i].vendor != NULL; i++) {
- if (boards[i].working)
+ int i, boardcount_good = 0, boardcount_bad = 0;
+ const struct board_pciid_enable *e = board_pciid_enables;
+ const struct board_info *b = boards;
+ int maxvendorlen = strlen("Vendor") + 1;
+ int maxboardlen = strlen("Board") + 1;
+
+ for (b = boards; b->vendor != NULL; b++) {
+ maxvendorlen = max(maxvendorlen, strlen(b->vendor));
+ maxboardlen = max(maxboardlen, strlen(b->name));
+ if (b->working)
boardcount_good++;
else
boardcount_bad++;
}
+ maxvendorlen++;
+ maxboardlen++;
+
+ printf("Known %s (good: %d, bad: %d):\n\n",
+ devicetype, boardcount_good, boardcount_bad);
+
+ printf("Vendor");
+ for (i = strlen("Vendor"); i < maxvendorlen; i++)
+ printf(" ");
+
+ printf("Board");
+ for (i = strlen("Board"); i < maxboardlen; i++)
+ printf(" ");
+
+ printf("Status Required option\n\n");
+
+ for (b = boards; b->vendor != NULL; b++) {
+ printf("%s", b->vendor);
+ for (i = 0; i < maxvendorlen - strlen(b->vendor); i++)
+ printf(" ");
+ printf("%s", b->name);
+ for (i = 0; i < maxboardlen - strlen(b->name); i++)
+ printf(" ");
+ printf((b->working) ? "OK " : "BAD ");
- printf("\nKnown %s (good: %d, bad: %d):"
- "\n\nVendor: Board: "
- "Status: Required option:"
- "\n\n", devicetype, boardcount_good, boardcount_bad);
-
- for (i = 0; boards[i].vendor != NULL; i++) {
- printf("%s", boards[i].vendor);
- for (j = 0; j < 25 - strlen(boards[i].vendor); j++)
- printf(" ");
- printf("%s", boards[i].name);
- for (j = 0; j < 28 - strlen(boards[i].name); j++)
- printf(" ");
- printf((boards[i].working) ? "OK " : "BAD ");
-
- for (j = 0; b[j].vendor_name != NULL; j++) {
- if (strcmp(b[j].vendor_name, boards[i].vendor)
- || strcmp(b[j].board_name, boards[i].name))
+ for (e = board_pciid_enables; e->vendor_name != NULL; e++) {
+ if (strcmp(e->vendor_name, b->vendor)
+ || strcmp(e->board_name, b->name))
continue;
- if (b[j].lb_vendor == NULL)
+ if (e->lb_vendor == NULL)
printf("(autodetected)");
else
- printf("-m %s:%s", b[j].lb_vendor,
- b[j].lb_part);
+ printf("-m %s:%s", e->lb_vendor,
+ e->lb_part);
}
printf("\n");
}
@@ -228,10 +260,12 @@
printf("\nSupported programmers:\n");
list_programmers_linebreak(0, 80, 0);
#if CONFIG_INTERNAL == 1
- printf("\nSupported devices for the %s programmer:\n",
+ printf("\nSupported devices for the %s programmer:\n\n",
programmer_table[PROGRAMMER_INTERNAL].name);
print_supported_chipsets();
+ printf("\n");
print_supported_boards_helper(boards_known, "boards");
+ printf("\n");
print_supported_boards_helper(laptops_known, "laptops");
#endif
#if CONFIG_DUMMY == 1
Modified: trunk/programmer.h
==============================================================================
--- trunk/programmer.h Thu May 19 04:58:17 2011 (r1317)
+++ trunk/programmer.h Thu May 26 03:35:19 2011 (r1318)
@@ -145,7 +145,7 @@
struct penable {
uint16_t vendor_id;
uint16_t device_id;
- int status;
+ int status; /* OK=0 and NT=1 are defines only. Beware! */
const char *vendor_name;
const char *device_name;
int (*doit) (struct pci_dev *dev, const char *name);
@@ -174,10 +174,10 @@
uint16_t second_card_vendor;
uint16_t second_card_device;
- /* Pattern to match DMI entries */
+ /* Pattern to match DMI entries. May be NULL. */
const char *dmi_pattern;
- /* The vendor / part name from the coreboot table. */
+ /* The vendor / part name from the coreboot table. May be NULL. */
const char *lb_vendor;
const char *lb_part;
@@ -188,7 +188,7 @@
int max_rom_decode_parallel;
int status;
- int (*enable) (void);
+ int (*enable) (void); /* May be NULL. */
};
extern const struct board_pciid_enable board_pciid_enables[];
1
0
26 May '11
Am 01.04.2011 14:33 schrieb Stefan Tauner:
> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at>
>
Assuming that you looked at diff -w and found no code differences, this is
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net>
Regards,
Carl-Daniel
--
http://www.hailfinger.org/
1
0
Re: [flashrom] [PATCH 6/7] add missing ICH9 register macros and use them to eliminate magic numbers
by Stefan Tauner 25 May '11
by Stefan Tauner 25 May '11
25 May '11
On Tue, 24 May 2011 01:23:13 +0200
Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> wrote:
> + if (ichspi_bbar) {
> msg_pdbg("Reserved bits in BBAR not zero: 0x%04x",
> ichspi_bbar);
> ichspi_bbar |= minaddr;
dunno why the closing } was lost here. must have been a mistake when i
reordered my patches with cherry-pick and did not compile test again. :/
did i mention that i hate line limits?
the correct hunk(s) should look like this:
diff --git a/ichspi.c b/ichspi.c
index b7b8cbd..03bc162 100644
@@ -556,9 +556,10 @@ void ich_set_bbar(uint32_t minaddr)
case SPI_CONTROLLER_ICH7:
case SPI_CONTROLLER_VIA:
ichspi_bbar = mmio_readl(ich_spibar + 0x50) & ~BBAR_MASK;
- if (ichspi_bbar)
+ if (ichspi_bbar) {
msg_pdbg("Reserved bits in BBAR not zero: 0x%04x",
ichspi_bbar);
+ }
ichspi_bbar |= minaddr;
rmmio_writel(ichspi_bbar, ich_spibar + 0x50);
ichspi_bbar = mmio_readl(ich_spibar + 0x50);
@@ -570,9 +571,10 @@ void ich_set_bbar(uint32_t minaddr)
break;
case SPI_CONTROLLER_ICH9:
ichspi_bbar = mmio_readl(ich_spibar + ICH9_REG_BBAR) & ~BBAR_MASK;
- if (ichspi_bbar)
+ if (ichspi_bbar) {
msg_pdbg("Reserved bits in BBAR not zero: 0x%04x",
ichspi_bbar);
+ }
ichspi_bbar |= minaddr;
rmmio_writel(ichspi_bbar, ich_spibar + ICH9_REG_BBAR);
ichspi_bbar = mmio_readl(ich_spibar + ICH9_REG_BBAR);
--
Kind regards/Mit freundlichen Grüßen, Stefan Tauner
1
0
I have an MSI Big Bang Xpower motherboard with openSUSE 11.2 GNU/Linux as the main OS. I'd like to use flashrom to install a newer version of the BIOS. I installed and executed flashrom from 11.2:
-----
flashrom v0.9.1-r710
No coreboot table found.
Found chipset "Intel ICH10R", enabling flash write... OK.
This chipset supports the following protocols: LPC,FWH,SPI.
Calibrating delay loop... OK.
No EEPROM/flash device found.
If you know which flash chip you have, and if this version of flashrom
supports a similar flash chip, you can try to force read your chip. Run:
flashrom -f -r -c similar_supported_flash_chip filename
Note: flashrom can never write when the flash chip isn't found automatically.
-----
From this, I checked for the supported hardware on flashrom.org and didn't see the MSI Big Bang Xpower. I'm sending the results of flashrom -V and lspci --nnvvxxx in hopes of having this motherboard supported. (openSUSE 11.2 doesn't seem to have superiotool.)
Thanks!
-----
flashrom v0.9.1-r710
No coreboot table found.
Found chipset "Intel ICH10R", enabling flash write...
0xfff80000/0xffb80000 FWH IDSEL: 0x0
0xfff00000/0xffb00000 FWH IDSEL: 0x0
0xffe80000/0xffa80000 FWH IDSEL: 0x1
0xffe00000/0xffa00000 FWH IDSEL: 0x1
0xffd80000/0xff980000 FWH IDSEL: 0x2
0xffd00000/0xff900000 FWH IDSEL: 0x2
0xffc80000/0xff880000 FWH IDSEL: 0x3
0xffc00000/0xff800000 FWH IDSEL: 0x3
0xff700000/0xff300000 FWH IDSEL: 0x4
0xff600000/0xff200000 FWH IDSEL: 0x5
0xff500000/0xff100000 FWH IDSEL: 0x6
0xff400000/0xff000000 FWH IDSEL: 0x7
0xfff80000/0xffb80000 FWH decode enabled
0xfff00000/0xffb00000 FWH decode enabled
0xffe80000/0xffa80000 FWH decode enabled
0xffe00000/0xffa00000 FWH decode enabled
0xffd80000/0xff980000 FWH decode enabled
0xffd00000/0xff900000 FWH decode enabled
0xffc80000/0xff880000 FWH decode enabled
0xffc00000/0xff800000 FWH decode enabled
0xff700000/0xff300000 FWH decode disabled
0xff600000/0xff200000 FWH decode disabled
0xff500000/0xff100000 FWH decode disabled
0xff400000/0xff000000 FWH decode disabled
BIOS Lock Enable: enabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x3
Root Complex Register Block address = 0xfed1c000
GCS = 0x461: BIOS Interface Lock-Down: enabled, BOOT BIOS Straps: 0x1 (SPI)
Top Swap : not enabled
SPIBAR = 0xfed1c000 + 0x3800
0x04: 0x0008 (HSFS)
FLOCKDN 0, FDV 0, FDOPSS 0, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0
0x50: 0x0000ffff (FRAP)
BMWAG 0, BMRAG 0, BRWA 255, BRRA 255
0x54: 0x00001fff (FREG0)
0x58: 0x00001fff (FREG1)
0x5C: 0x00001fff (FREG2)
0x60: 0x00001fff (FREG3)
0x64: 0x00001fff (FREG4)
0x74: 0x00000000 (PR0)
0x78: 0x00000000 (PR1)
0x7C: 0x00000000 (PR2)
0x80: 0x00000000 (PR3)
0x84: 0x00000000 (PR4)
0x90: 0x00426004 (SSFS, SSFC)
0x94: 0x0006 (PREOP)
0x96: 0x463b (OPTYPE)
0x98: 0x05d80302 (OPMENU)
0x9C: 0xc79f0190 (OPMENU+4)
0xA0: 0x00000000 (BBAR)
0xB0: 0x00000000 (FDOC)
Programming OPCODES...
program_opcodes: preop=0006 optype=463b opmenu=05d80302c79f0190
done
SPI Read Configuration: prefetching disabled, caching enabled, OK.
This chipset supports the following protocols: LPC,FWH,SPI.
Calibrating delay loop... 1128M loops per second, 100 myus = 199 us. OK.
Probing for AMD Am29F010A/B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMD Am29F002(N)BB, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMD Am29F002(N)BT, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMD Am29F016D, 2048 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMD Am29F040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMD Am29F080B, 1024 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMD Am29LV040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMD Am29LV081B, 1024 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for ASD AE49F2008, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT25DF021, 256 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Atmel AT25DF041A, 512 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Atmel AT25DF081, 1024 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Atmel AT25DF161, 2048 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Atmel AT25DF321, 4096 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Atmel AT25DF321A, 4096 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Atmel AT25DF641, 8192 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Atmel AT25F512B, 64 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Atmel AT25FS010, 128 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Atmel AT25FS040, 512 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Atmel AT26DF041, 512 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Atmel AT26DF081A, 1024 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Atmel AT26DF161, 2048 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Atmel AT26DF161A, 2048 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Atmel AT26F004, 512 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Atmel AT29C512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT29C010A, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT29C020, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT29C040A, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT45CS1282, 16896 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Atmel AT45DB011D, 128 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Atmel AT45DB021D, 256 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Atmel AT45DB041D, 512 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Atmel AT45DB081D, 1024 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Atmel AT45DB161D, 2048 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Atmel AT45DB321C, 4224 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Atmel AT45DB321D, 4096 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Atmel AT45DB642D, 8192 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Atmel AT49BV512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT49F002(N), 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Atmel AT49F002(N)T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMIC A25L40P, 512 KB: RDID returned 0xef 0x40 0x16 0x00. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for AMIC A29002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMIC A29002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMIC A29040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for AMIC A49LF040A, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for EMST F49B002UA, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Eon EN25B05, 64 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Eon EN25B10, 128 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Eon EN25B20, 256 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Eon EN25B40, 512 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Eon EN25B80, 1024 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Eon EN25B16, 2048 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Eon EN25B32, 4096 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Eon EN25B64, 8192 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Eon EN25D16, 2048 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Eon EN25F05, 64 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Eon EN25F10, 128 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Eon EN25F20, 256 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Eon EN25F40, 512 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Eon EN25F80, 1024 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Eon EN25F16, 2048 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Eon EN25F32, 4096 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Intel 28F001BX-B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Intel 28F001BX-T, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for Macronix MX25L512, 64 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Macronix MX25L1005, 128 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Macronix MX25L2005, 256 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Macronix MX25L4005, 512 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Macronix MX25L8005, 1024 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Macronix MX25L1605, 2048 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Macronix MX25L1635D, 2048 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Macronix MX25L3205, 4096 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Macronix MX25L3235D, 4096 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Macronix MX25L6405, 8192 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Macronix MX25L12805, 16384 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Macronix MX29F001B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Macronix MX29F001T, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Macronix MX29F002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Macronix MX29F002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Macronix MX29LV040, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Numonyx M25PE10, 128 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Numonyx M25PE20, 256 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Numonyx M25PE40, 256 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Numonyx M25PE80, 1024 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Numonyx M25PE16, 2048 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for PMC Pm25LV010, 128 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for PMC Pm25LV016B, 2048 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for PMC Pm25LV020, 256 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for PMC Pm25LV040, 512 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for PMC Pm25LV080B, 1024 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for PMC Pm25LV512, 64 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for PMC Pm29F0002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for PMC Pm29F0002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for PMC Pm39LV010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for PMC Pm49FL002, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc7, id2 0x85, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL004, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Sharp LHF00L04, 1024 KB: probe_lhf00l04: id1 0xff, id2 0xff
Probing for Spansion S25FL016A, 2048 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for SST SST25VF016B, 2048 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for SST SST25VF032B, 4096 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for SST SST25VF040B, 512 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for SST SST25VF040.REMS, 512 KB: REMS returned ef 15. probe_spi_rems: id1 0xef, id2 0x15
Probing for SST SST25VF040B.REMS, 512 KB: REMS returned ef 15. probe_spi_rems: id1 0xef, id2 0x15
Probing for SST SST25VF080B, 1024 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for SST SST28SF040A, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST29EE010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST29LE010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST29EE020A, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST29LE020, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST39SF010A, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST39SF020A, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST39SF040, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST39VF512, 64 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST39VF010, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST39VF020, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST39VF040, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST39VF080, 1024 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SST SST49LF002A/B, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc7, id2 0x85, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF003A/B, 384 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004A/B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF004C, 512 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for SST SST49LF008A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for SST SST49LF016C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for SST SST49LF020, 256 KB: probe_jedec: id1 0xc7, id2 0x85, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF020A, 256 KB: probe_jedec: id1 0xc7, id2 0x85, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF040, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF040B, 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF080A, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF160C, 2048 KB: probe_49lfxxxc: id1 0xff, id2 0xff
Probing for ST M25P05-A, 64 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for ST M25P05.RES, 64 KB: RDID returned 0xef 0x40 0x16. Probing for ST M25P10-A, 128 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for ST M25P10.RES, 128 KB: RDID returned 0xef 0x40 0x16. Probing for ST M25P20, 256 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for ST M25P40, 512 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for ST M25P40-old, 512 KB: RDID returned 0xef 0x40 0x16. Probing for ST M25P80, 1024 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for ST M25P16, 2048 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for ST M25P32, 4096 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for ST M25P64, 8192 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for ST M25P128, 16384 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for ST M29F002B, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for ST M29F002T/NT, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for ST M29F040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for ST M29F400BT, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for ST M29W010B, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for ST M29W040B, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for ST M50FLW040A, 512 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff
Probing for ST M50FLW040B, 512 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff
Probing for ST M50FLW080A, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff
Probing for ST M50FLW080B, 1024 KB: probe_stm50flw0x0x: id1 0xff, id2 0xff
Probing for ST M50FW002, 256 KB: probe_49lfxxxc: id1 0xc7, id2 0x85
Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff
Probing for ST M50LPW116, 2048 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SyncMOS S29C31004T, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SyncMOS S29C51001T, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SyncMOS S29C51002T, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for SyncMOS S29C51004T, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for TI TMS29F002RB, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for TI TMS29F002RT, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Winbond W25x10, 128 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Winbond W25x20, 256 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Winbond W25x40, 512 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Winbond W25x80, 1024 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Winbond W25x16, 2048 KB: RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Probing for Winbond W29C011, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Winbond W29C020C, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Winbond W29C040P, 512 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Winbond W29EE011, 128 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040B, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040C, 512 KB: probe_w39v040c: id1 0xff, id2 0xff, id1 parity violation
Probing for Winbond W39V040FA, 512 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080A, 1024 KB: probe_jedec: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49F002U, 256 KB: skipped. Host bus type LPC,FWH,SPI and chip bus type Parallel are incompatible.
Probing for Winbond W49V002A, 256 KB: probe_jedec: id1 0xc7, id2 0x85, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W49V002FA, 256 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec: id1 0xc7, id2 0x85, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA, 1024 KB: probe_winbond_fwhub: id1 0xff, id2 0xff
Probing for Winbond W39V080FA (dual mode), 512 KB: probe_winbond_fwhub: id1 0xff, id2 0xff
Probing for Atmel unknown Atmel SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000.
RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Not unmapping zero size at (nil)
Probing for EON unknown EON SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000.
RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Not unmapping zero size at (nil)
Probing for Macronix unknown Macronix SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000.
RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Not unmapping zero size at (nil)
Probing for PMC unknown PMC SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000.
RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Not unmapping zero size at (nil)
Probing for SST unknown SST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000.
RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Not unmapping zero size at (nil)
Probing for ST unknown ST SPI chip, 0 KB: Not mapping flash chip, zero size at 0x00000000.
RDID returned 0xef 0x40 0x16. probe_spi_rdid_generic: id1 0xef, id2 0x4016
Not unmapping zero size at (nil)
No EEPROM/flash device found.
If you know which flash chip you have, and if this version of flashrom
supports a similar flash chip, you can try to force read your chip. Run:
flashrom -f -r -c similar_supported_flash_chip filename
Note: flashrom can never write when the flash chip isn't found automatically.
-----
-----
00:00.0 Host bridge [0600]: Intel Corporation X58 I/O Hub to ESI Port [8086:3405] (rev 13)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7666]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [60] MSI: Enable- Count=1/2 Maskable+ 64bit-
Address: 00000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Capabilities: [160] Vendor Specific Information <?>
00: 86 80 05 34 00 00 10 00 13 00 00 06 40 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 66 76
30: 00 00 00 00 60 00 00 00 00 00 00 00 ff 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 d1 fe 00 00 00 00 00 00 00 00 00 00 00 00
60: 05 90 02 01 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 10 e0 42 00 20 80 00 00 00 00 00 00 41 3c 3b 00
a0: 00 00 41 30 00 00 00 00 c0 07 00 01 00 00 00 00
b0: 00 00 00 00 3e 00 00 00 09 00 00 00 00 00 00 00
c0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 01 00 03 c8 08 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=0f, subordinate=0f, sec-latency=0
Memory behind bridge: fbe00000-fbefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: Micro-Star International Co., Ltd. Device [1462:7666]
Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
Address: feeff00c Data: 4169
Masking: 00000002 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM unknown, Latency L0 <512ns, L1 <4us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 31, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Capabilities: [160] Vendor Specific Information <?>
Kernel driver in use: pcieport-driver
00: 86 80 08 34 06 05 10 00 13 00 04 06 40 00 01 00
10: 00 00 00 00 00 00 00 00 00 0f 0f 00 f0 00 00 20
20: e0 fb e0 fb f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
40: 0d 60 00 00 62 14 66 76 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 05 90 03 01 0c f0 ef fe 69 41 00 00 02 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 10 e0 42 01 21 80 00 00 0f 00 00 00 02 31 39 00
a0: 40 00 12 70 00 05 88 01 c0 03 48 01 00 00 01 00
b0: 00 00 00 00 3e 00 00 00 09 00 00 00 00 00 00 00
c0: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 01 00 03 c8 08 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:02.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 [8086:3409] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbd00000-fbdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: Intel Corporation Device [8086:0000]
Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
Address: feeff00c Data: 4171
Masking: 00000002 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x2, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 32, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Kernel driver in use: pcieport-driver
00: 86 80 09 34 07 05 10 00 13 00 04 06 40 00 01 00
10: 00 00 00 00 00 00 00 00 00 0e 0e 00 e0 e0 00 00
20: d0 fb d0 fb f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
40: 0d 60 00 00 86 80 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 05 90 03 01 0c f0 ef fe 71 41 00 00 02 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 10 e0 42 01 21 80 00 00 0f 00 00 00 22 3c 3b 00
a0: 40 00 12 70 00 05 90 01 c0 03 48 01 00 00 01 00
b0: 00 00 00 00 3e 00 00 00 09 00 00 00 00 00 00 00
c0: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 01 00 03 c8 08 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f9f00000-fbcfffff
Prefetchable memory behind bridge: 00000000ce000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: Micro-Star International Co., Ltd. Device [1462:7666]
Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
Address: feeff00c Data: 4179
Masking: 00000002 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM unknown, Latency L0 <512ns, L1 <4us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 33, PowerLimit 75.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Capabilities: [160] Vendor Specific Information <?>
Kernel driver in use: pcieport-driver
00: 86 80 0a 34 07 05 10 00 13 00 04 06 40 00 01 00
10: 00 00 00 00 00 00 00 00 00 0d 0d 00 d0 d0 00 00
20: f0 f9 c0 fb 01 ce f1 df 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 1a 00
40: 0d 60 00 00 62 14 66 76 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 05 90 03 01 0c f0 ef fe 79 41 00 00 02 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 10 e0 42 01 21 80 00 00 0f 00 00 00 02 31 39 00
a0: 40 00 02 71 80 25 98 01 c0 03 48 01 00 00 01 00
b0: 00 00 00 00 3e 00 00 00 09 00 00 00 00 00 00 00
c0: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 01 00 03 c8 08 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:04.0 PCI bridge [0604]: Intel Corporation 5520/X58 I/O Hub PCI Express Root Port 4 [8086:340b] (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: Intel Corporation Device [8086:0000]
Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
Address: feeff00c Data: 4189
Masking: 00000002 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 34, PowerLimit 25.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Kernel driver in use: pcieport-driver
00: 86 80 0b 34 04 05 10 00 13 00 04 06 40 00 01 00
10: 00 00 00 00 00 00 00 00 00 0c 0c 00 f0 00 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
40: 0d 60 00 00 86 80 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 05 90 03 01 0c f0 ef fe 89 41 00 00 02 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 10 e0 42 01 21 80 00 00 0f 00 00 00 42 3c 39 00
a0: 00 00 02 10 80 0c a0 01 c0 03 08 00 00 00 01 00
b0: 00 00 00 00 3e 00 00 00 09 00 00 00 00 00 00 00
c0: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 01 00 03 c8 08 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:05.0 PCI bridge [0604]: Intel Corporation 5520/X58 I/O Hub PCI Express Root Port 5 [8086:340c] (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: Intel Corporation Device [8086:0000]
Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
Address: feeff00c Data: 4191
Masking: 00000002 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 35, PowerLimit 25.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Kernel driver in use: pcieport-driver
00: 86 80 0c 34 04 05 10 00 13 00 04 06 40 00 01 00
10: 00 00 00 00 00 00 00 00 00 0b 0b 00 f0 00 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
40: 0d 60 00 00 86 80 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 05 90 03 01 0c f0 ef fe 91 41 00 00 02 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 10 e0 42 01 21 80 00 00 0f 00 00 00 42 3c 39 00
a0: 00 00 02 10 80 0c a8 01 c0 03 08 00 00 00 01 00
b0: 00 00 00 00 3e 00 00 00 09 00 00 00 00 00 00 00
c0: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 01 00 03 c8 08 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:06.0 PCI bridge [0604]: Intel Corporation 5520/X58 I/O Hub PCI Express Root Port 6 [8086:340d] (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: Intel Corporation Device [8086:0000]
Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
Address: feeff00c Data: 4199
Masking: 00000002 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 36, PowerLimit 25.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Kernel driver in use: pcieport-driver
00: 86 80 0d 34 04 05 10 00 13 00 04 06 40 00 01 00
10: 00 00 00 00 00 00 00 00 00 0a 0a 00 f0 00 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
40: 0d 60 00 00 86 80 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 05 90 03 01 0c f0 ef fe 99 41 00 00 02 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 10 e0 42 01 21 80 00 00 0f 00 00 00 42 3c 39 00
a0: 00 00 02 10 80 0c b0 01 c0 03 08 00 00 00 01 00
b0: 00 00 00 00 3e 00 00 00 09 00 00 00 00 00 00 00
c0: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 01 00 03 c8 08 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: Micro-Star International Co., Ltd. Device [1462:7666]
Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
Address: feeff00c Data: 41a1
Masking: 00000002 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM unknown, Latency L0 <512ns, L1 <4us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 37, PowerLimit 25.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Capabilities: [160] Vendor Specific Information <?>
Kernel driver in use: pcieport-driver
00: 86 80 0e 34 04 05 10 00 13 00 04 06 40 00 01 00
10: 00 00 00 00 00 00 00 00 00 09 09 00 f0 00 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
40: 0d 60 00 00 62 14 66 76 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 05 90 03 01 0c f0 ef fe a1 41 00 00 02 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 10 e0 42 01 21 80 00 00 0f 00 00 00 02 31 39 00
a0: 00 00 01 10 80 0c b8 01 c0 03 08 00 00 00 01 00
b0: 00 00 00 00 3e 00 00 00 09 00 00 00 00 00 00 00
c0: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 01 00 03 c8 08 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:08.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 8 [8086:340f] (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: Intel Corporation Device [8086:0000]
Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
Address: feeff00c Data: 41a9
Masking: 00000002 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 38, PowerLimit 25.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Kernel driver in use: pcieport-driver
00: 86 80 0f 34 04 05 10 00 13 00 04 06 40 00 01 00
10: 00 00 00 00 00 00 00 00 00 08 08 00 f0 00 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
40: 0d 60 00 00 86 80 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 05 90 03 01 0c f0 ef fe a9 41 00 00 02 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 10 e0 42 01 21 80 00 00 0f 00 00 00 42 3c 39 00
a0: 00 00 01 10 80 0c c0 01 c0 03 08 00 00 00 01 00
b0: 00 00 00 00 3e 00 00 00 09 00 00 00 00 00 00 00
c0: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 01 00 03 c8 08 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:09.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 9 [8086:3410] (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: Intel Corporation Device [8086:0000]
Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
Address: feeff00c Data: 41b1
Masking: 00000002 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 39, PowerLimit 25.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Kernel driver in use: pcieport-driver
00: 86 80 10 34 04 05 10 00 13 00 04 06 40 00 01 00
10: 00 00 00 00 00 00 00 00 00 07 07 00 f0 00 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
40: 0d 60 00 00 86 80 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 05 90 03 01 0c f0 ef fe b1 41 00 00 02 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 10 e0 42 01 21 80 00 00 0f 00 00 00 42 3c 39 00
a0: 00 00 01 10 80 0c c8 01 c0 03 08 00 00 00 01 00
b0: 00 00 00 00 3e 00 00 00 09 00 00 00 00 00 00 00
c0: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 01 00 03 c8 08 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0a.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 10 [8086:3411] (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: Intel Corporation Device [8086:0000]
Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
Address: feeff00c Data: 41b9
Masking: 00000002 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 3a, PowerLimit 25.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Kernel driver in use: pcieport-driver
00: 86 80 11 34 04 05 10 00 13 00 04 06 40 00 01 00
10: 00 00 00 00 00 00 00 00 00 06 06 00 f0 00 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
40: 0d 60 00 00 86 80 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 05 90 03 01 0c f0 ef fe b9 41 00 00 02 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 10 e0 42 01 21 80 00 00 0f 00 00 00 42 3c 39 00
a0: 00 00 01 10 80 0c d0 01 c0 03 08 00 00 00 01 00
b0: 00 00 00 00 3e 00 00 00 09 00 00 00 00 00 00 00
c0: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 01 00 03 c8 08 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:14.0 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers [8086:342e] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
00: 86 80 2e 34 00 00 10 00 13 00 00 08 40 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00
40: 10 00 92 00 00 80 00 00 00 00 00 00 00 f4 3b 00
50: 00 00 00 10 00 00 00 00 c0 07 00 00 00 00 01 00
60: 00 00 00 00 00 80 00 00 00 00 00 00 00 f4 3b 00
70: 00 00 00 10 00 00 00 00 c0 07 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 07 00
90: 00 00 00 00 00 00 00 00 48 10 04 00 34 6c 03 00
a0: 00 00 00 00 00 00 00 00 09 00 80 cb 00 00 00 00
b0: 00 00 ff ff ff ff 07 00 00 00 00 00 00 00 00 00
c0: 00 00 ff ff ff ff 07 00 00 00 00 00 00 00 00 00
d0: 00 00 00 c8 00 00 00 b0 01 00 00 00 00 00 00 fc
e0: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 e8 ff 3f 00 00 00 00 c4 7f 00 00 00 00 00 00
00:14.1 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
00: 86 80 22 34 00 00 10 00 13 00 00 08 40 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00
40: 10 00 92 00 00 80 00 00 00 00 00 00 00 f4 3b 00
50: 00 00 00 10 00 00 00 00 c0 07 00 00 00 00 01 00
60: 00 00 00 00 00 80 00 00 00 00 00 00 00 f4 3b 00
70: 00 00 00 10 00 00 00 00 c0 07 00 00 80 15 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 bf
a0: 00 00 00 00 00 00 00 02 00 00 84 01 00 00 00 00
b0: fa 36 01 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 47 2d 00 00
d0: 04 00 04 00 00 04 00 00 00 00 00 00 80 15 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 bf
00:14.2 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
00: 86 80 23 34 00 00 10 00 13 00 00 08 40 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00
40: 10 00 92 00 00 80 00 00 00 00 00 00 00 f4 3b 00
50: 00 00 00 10 00 00 00 00 c0 07 00 00 00 00 01 00
60: 00 00 00 00 00 80 00 00 00 00 00 00 00 f4 3b 00
70: 00 00 00 10 00 00 00 00 c0 07 00 00 00 00 00 00
80: a4 80 a0 02 50 01 aa aa a8 00 00 00 65 15 00 00
90: 00 00 00 00 24 00 00 00 04 08 00 00 22 05 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 00 00 00 00 00 00 00 00 00 00 00 42 00 00
d0: 00 00 00 00 00 08 08 92 9d 00 bf 35 00 00 10 00
e0: 40 58 05 00 db 01 00 00 ff 07 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:14.3 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers [8086:3438] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00: 86 80 38 34 00 00 00 00 13 00 00 08 40 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 0b 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 0b 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 0b 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 dc 00 00 00 a8 00 00 00 00 00 b4 00 c8 00
f0: 00 00 00 7f 00 00 00 00 40 0d d3 07 00 00 00 00
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7666]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 7080 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00: 86 80 37 3a 05 00 90 02 00 00 03 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 81 70 00 00 00 00 00 00 00 00 00 00 62 14 66 76
30: 00 00 00 00 50 00 00 00 00 00 00 00 03 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 2f 00 00 00 00 00 00 00 00 01 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 86 0f 04 00 00 00 00 00
00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7666]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 7400 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00: 86 80 38 3a 05 00 90 02 00 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 74 00 00 00 00 00 00 00 00 00 00 62 14 66 76
30: 00 00 00 00 50 00 00 00 00 00 00 00 06 02 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 2f 00 00 00 00 00 00 00 00 01 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 86 0f 04 00 00 00 00 00
00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7666]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at 7480 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00: 86 80 39 3a 05 00 90 02 00 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 81 74 00 00 00 00 00 00 00 00 00 00 62 14 66 76
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 04 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 2f 00 00 00 00 00 00 00 00 01 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 86 0f 04 00 00 00 00 00
00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7666]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f9af6000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
00: 86 80 3c 3a 06 00 90 02 00 20 03 0c 00 00 00 00
10: 00 60 af f9 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 66 76
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 03 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 58 c2 c9 00 00 00 00 0a 98 a0 20 00 00 00 00
60: 20 20 ff 01 00 00 00 00 01 00 00 00 00 00 08 80
70: 00 00 cf 0f 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 13 00 06 03 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 aa ff 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 88 85 40 00 86 0f 04 00 0a 17 02 20
00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e]
Subsystem: Micro-Star International Co., Ltd. Device [1462:4132]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f9af8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
00: 86 80 3e 3a 06 00 10 00 00 00 03 04 40 00 00 00
10: 04 80 af f9 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 32 41
30: 00 00 00 00 50 00 00 00 00 00 00 00 04 01 00 00
40: 01 00 00 07 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 60 42 c8 00 00 00 00 00 00 00 00 00 00 00 00
60: 05 70 80 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 10 00 91 00 00 00 00 10 00 08 10 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 04 00 01 00 00 00 00 31 00 a3 02 00 00 00 00
d0: 61 00 a3 02 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 86 0f 04 00 00 00 00 00
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f9e00000-f9efffff
Prefetchable memory behind bridge: 00000000f8f00000-00000000f8ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 20, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: feeff00c Data: 41c1
Capabilities: [90] Subsystem: Micro-Star International Co., Ltd. Device [1462:4132]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
00: 86 80 40 3a 07 05 10 00 00 00 04 06 40 00 81 00
10: 00 00 00 00 00 00 00 00 00 05 05 00 c0 c0 00 00
20: e0 f9 e0 f9 f1 f8 f1 f8 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 05 01 02 00
40: 10 80 41 01 00 80 00 00 00 00 10 00 11 2c 11 01
50: 40 00 11 30 60 05 00 01 00 00 48 01 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 0c f0 ef fe c1 41 00 00 00 00 00 00
90: 0d a0 00 00 62 14 32 41 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 11 08 00 00 00 00
e0: 00 0f c7 00 06 07 08 00 30 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 86 0f 04 00 00 00 00 00
00:1c.1 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 [8086:3a42] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f9d00000-f9dfffff
Prefetchable memory behind bridge: 00000000f8e00000-00000000f8efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 21, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: feeff00c Data: 41c9
Capabilities: [90] Subsystem: Micro-Star International Co., Ltd. Device [1462:4132]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
00: 86 80 42 3a 07 05 10 00 00 00 04 06 40 00 81 00
10: 00 00 00 00 00 00 00 00 00 04 04 00 b0 b0 00 00
20: d0 f9 d0 f9 e1 f8 e1 f8 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 03 02 02 00
40: 10 80 41 01 00 80 00 00 00 00 10 00 11 2c 11 02
50: 40 00 11 30 60 05 08 01 00 00 48 01 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 0c f0 ef fe c9 41 00 00 00 00 00 00
90: 0d a0 00 00 62 14 32 41 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 11 08 00 00 00 00
e0: 00 0f c7 00 06 07 08 00 30 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 86 0f 04 00 00 00 00 00
00:1c.2 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 3 [8086:3a44] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: f9c00000-f9cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 22, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: feeff00c Data: 41d1
Capabilities: [90] Subsystem: Micro-Star International Co., Ltd. Device [1462:4132]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
00: 86 80 44 3a 07 05 10 00 00 00 04 06 40 00 81 00
10: 00 00 00 00 00 00 00 00 00 03 03 00 a0 a0 00 00
20: c0 f9 c0 f9 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 03 02 00
40: 10 80 41 01 00 80 00 00 00 00 10 00 11 4c 11 03
50: 00 00 11 30 60 05 10 01 00 00 48 01 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 0c f0 ef fe d1 41 00 00 00 00 00 00
90: 0d a0 00 00 62 14 32 41 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 11 08 00 00 00 00
e0: 00 0f c7 00 06 07 08 00 30 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 86 0f 04 00 00 00 00 00
00:1c.3 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 4 [8086:3a46] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: f9b00000-f9bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 23, PowerLimit 10.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: feeff00c Data: 41d9
Capabilities: [90] Subsystem: Micro-Star International Co., Ltd. Device [1462:4132]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
00: 86 80 46 3a 07 05 10 00 00 00 04 06 40 00 81 00
10: 00 00 00 00 00 00 00 00 00 02 02 00 90 90 00 00
20: b0 f9 b0 f9 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 04 02 00
40: 10 80 41 01 00 80 00 00 00 00 10 00 11 2c 11 04
50: 40 00 11 30 60 05 18 01 00 00 48 01 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 90 01 00 0c f0 ef fe d9 41 00 00 00 00 00 00
90: 0d a0 00 00 62 14 32 41 00 00 00 00 00 00 00 00
a0: 01 00 02 c8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 11 08 00 00 00 00
e0: 00 0f c7 00 06 07 08 00 30 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 86 0f 04 00 00 00 00 00
00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7666]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 7800 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00: 86 80 34 3a 05 00 90 02 00 00 03 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 78 00 00 00 00 00 00 00 00 00 00 62 14 66 76
30: 00 00 00 00 50 00 00 00 00 00 00 00 07 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 2f 00 00 00 00 00 00 00 00 01 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 86 0f 04 00 00 00 00 00
00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7666]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 7880 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00: 86 80 35 3a 05 00 90 02 00 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 81 78 00 00 00 00 00 00 00 00 00 00 62 14 66 76
30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 02 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 2f 00 00 00 00 00 00 00 00 01 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 86 0f 04 00 00 00 00 00
00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7666]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 7c00 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00: 86 80 36 3a 05 00 90 02 00 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 7c 00 00 00 00 00 00 00 00 00 00 62 14 66 76
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 03 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 2f 00 00 00 00 00 00 00 00 01 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 86 0f 04 00 00 00 00 00
00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7666]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f9afc000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
00: 86 80 3a 3a 06 00 90 02 00 20 03 0c 00 00 00 00
10: 00 c0 af f9 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 66 76
30: 00 00 00 00 50 00 00 00 00 00 00 00 07 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 58 c2 c9 00 00 00 00 0a 98 a0 20 00 00 00 00
60: 20 20 ff 01 00 00 00 00 01 00 00 00 00 00 08 80
70: 00 00 df 0f 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 13 00 06 03 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 aa ff 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 88 85 40 00 86 0f 04 00 0a 17 02 20
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Micro-Star International Co., Ltd. Device [1462:7666]
00: 86 80 4e 24 04 01 10 00 90 01 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 20 f0 00 80 22
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 02 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 12 00 00
50: 0d 00 00 00 62 14 66 76 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 86 0f 04 00 00 00 00 00
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16]
Subsystem: Micro-Star International Co., Ltd. Device [1462:7666]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
00: 86 80 16 3a 07 00 10 02 00 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 66 76
30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
40: 01 08 00 00 80 00 00 00 01 05 00 00 10 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 83 85 8b 8a d0 00 00 00 80 86 84 87 f8 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 0f 34 01 0a fc 00 01 0a 14 00 01 47 fc 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 74 06 00 00 39 00 00 00 13 00 00 00 00 03 00 c0
b0: 00 00 f0 00 00 00 00 00 00 00 00 08 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 33 22 11 00 67 45 00 00 c0 ff 00 00 03 00 00 00
e0: 09 00 0c 10 01 00 c4 02 64 02 00 00 00 00 00 00
f0: 01 c0 d1 fe 00 00 00 00 86 0f 04 00 00 00 00 00
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller [8086:3a20] (prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7666]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff90 [size=16]
Region 5: I/O ports at ffa0 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ata_piix
00: 86 80 20 3a 05 00 b0 02 00 8a 01 01 00 00 00 00
10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
20: 91 ff 00 00 a1 ff 00 00 00 00 00 00 62 14 66 76
30: 00 00 00 00 70 00 00 00 00 00 00 00 00 02 00 00
40: 73 e3 00 80 0b 00 00 00 03 00 11 00 00 00 00 00
50: 00 00 00 00 30 30 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 01 b0 03 00 08 00 00 00 00 00 00 00 00 00 00 00
80: 05 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 0f 85 93 01 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 07 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 86 0f 04 00 00 00 00 00
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]
Subsystem: Micro-Star International Co., Ltd. Device [1462:7666]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f9afe000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
00: 86 80 30 3a 03 00 80 02 00 00 05 0c 00 00 00 00
10: 04 e0 af f9 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 04 00 00 00 00 00 00 00 00 00 00 62 14 66 76
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 03 00 00
40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 02 04 04 00 f0 00 08 08 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 86 0f 04 00 00 00 00 00
00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller [8086:3a26] (prog-if 85 [Master SecO PriO])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7666]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 8c00 [size=8]
Region 1: I/O ports at 8880 [size=4]
Region 2: I/O ports at 8800 [size=8]
Region 3: I/O ports at 8480 [size=4]
Region 4: I/O ports at 8400 [size=16]
Region 5: I/O ports at 8080 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ata_piix
00: 86 80 26 3a 07 00 b0 02 00 85 01 01 00 00 00 00
10: 01 8c 00 00 81 88 00 00 01 88 00 00 81 84 00 00
20: 01 84 00 00 81 80 00 00 00 00 00 00 62 14 66 76
30: 00 00 00 00 70 00 00 00 00 00 00 00 0a 02 00 00
40: 00 80 00 80 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 01 b0 03 00 08 00 00 00 00 00 00 00 00 00 00 00
80: 05 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 13 00 06 03 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 86 0f 04 00 00 00 00 00
02:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 AHCI Controller [197b:2363] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7666]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 19
Region 5: Memory at f9bfe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Express (v1) Legacy Endpoint, MSI 01
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: ahci
00: 7b 19 63 23 07 00 10 00 03 01 06 01 40 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 e0 bf f9 00 00 00 00 62 14 66 76
30: 00 00 00 00 68 00 00 00 00 00 00 00 0a 01 00 00
40: b7 a1 c2 00 08 08 ff e0 20 00 00 20 00 00 00 00
50: 10 00 11 02 00 00 00 00 00 20 08 00 11 f4 03 01
60: 00 00 11 10 00 00 00 00 01 50 02 40 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 a0 01 0a 00 14 aa 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 00
c0: c3 8b 38 00 03 45 02 00 53 00 00 00 0f 80 a7 00
d0: 18 00 00 80 01 00 00 10 00 00 eb 00 00 00 00 01
e0: 00 00 00 00 00 00 00 00 18 35 9c c2 01 88 00 84
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
02:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 AHCI Controller [197b:2363] (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7666]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 16
Region 0: I/O ports at 9c00 [size=8]
Region 1: I/O ports at 9880 [size=4]
Region 2: I/O ports at 9800 [size=8]
Region 3: I/O ports at 9480 [size=4]
Region 4: I/O ports at 9400 [size=16]
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_jmicron
00: 7b 19 63 23 05 00 10 00 03 85 01 01 00 00 00 00
10: 01 9c 00 00 81 98 00 00 01 98 00 00 81 94 00 00
20: 01 94 00 00 00 00 00 00 00 00 00 00 62 14 66 76
30: 00 00 00 00 68 00 00 00 00 00 00 00 00 02 00 00
40: b7 a1 c2 00 08 08 ff e0 20 00 00 20 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 01 00 02 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 a0 01 0a 00 14 aa 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 00
c0: c3 8b 38 00 03 45 02 00 53 00 00 00 0f 80 a7 00
d0: 18 00 00 80 01 00 00 10 00 00 eb 00 00 00 00 01
e0: 00 00 00 00 00 00 00 00 18 35 9c c2 01 88 00 84
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
03:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. Device [1106:3403] (rev 01) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:666d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f9cff800 (64-bit, non-prefetchable) [size=2K]
Region 2: I/O ports at a800 [size=256]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [98] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [130] Device Serial Number 00-10-dc-ff-ff-b4-aa-98
Kernel driver in use: ohci1394
00: 06 11 03 34 07 00 10 00 01 10 00 0c 40 00 00 00
10: 04 f8 cf f9 00 00 00 00 01 a8 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 6d 66
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 80 03 e4 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 05 98 80 01 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 10 00 01 00 00 80 28 00
a0: 00 20 19 00 11 4c 07 00 00 00 11 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7666]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 40
Region 0: I/O ports at b800 [size=256]
Region 2: Memory at f8eff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f8ef8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at f9de0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000feeff00c Data: 4152
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [ac] MSI-X: Enable- Count=4 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [cc] Vital Product Data
Unknown small resource type 00, will not decode more.
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140] Virtual Channel <?>
Capabilities: [160] Device Serial Number 21-00-00-00-68-4c-e0-00
Kernel driver in use: r8169
00: ec 10 68 81 07 04 10 00 03 00 00 02 40 00 00 00
10: 01 b8 00 00 00 00 00 00 0c f0 ef f8 00 00 00 00
20: 0c 80 ef f8 00 00 00 00 00 00 00 00 62 14 66 76
30: 00 00 de f9 40 00 00 00 00 00 00 00 05 01 00 00
40: 01 50 c3 ff 08 00 00 00 00 00 00 00 00 00 00 00
50: 05 70 81 00 0c f0 ef fe 00 00 00 00 52 41 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 10 ac 02 02 c1 8c 28 00 10 50 19 00 11 3c 07 00
80: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 10 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 11 cc 03 00
b0: 04 00 00 00 04 08 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 80
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7666]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 39
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at f8fff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f8ff8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at f9ee0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000feeff00c Data: 414a
Capabilities: [70] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 4096 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [ac] MSI-X: Enable- Count=4 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00000800
Capabilities: [cc] Vital Product Data
Unknown small resource type 00, will not decode more.
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140] Virtual Channel <?>
Capabilities: [160] Device Serial Number 22-00-00-00-68-4c-e0-00
Kernel driver in use: r8169
00: ec 10 68 81 07 04 10 00 03 00 00 02 40 00 00 00
10: 01 c8 00 00 00 00 00 00 0c f0 ff f8 00 00 00 00
20: 0c 80 ff f8 00 00 00 00 00 00 00 00 62 14 66 76
30: 00 00 ee f9 40 00 00 00 00 00 00 00 03 01 00 00
40: 01 50 c3 ff 08 00 00 00 00 00 00 00 00 00 00 00
50: 05 70 81 00 0c f0 ef fe 00 00 00 00 4a 41 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 10 ac 02 02 c1 8c 28 00 10 50 19 00 11 3c 07 00
80: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 10 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 11 cc 03 00
b0: 04 00 00 00 04 08 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 80
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0d:00.0 VGA compatible controller [0300]: nVidia Corporation Device [10de:0ca3] (rev a2) (prog-if 00 [VGA controller])
Subsystem: eVga.com. Corp. Device [3842:1246]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at ce000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at dc00 [size=128]
[virtual] Expansion ROM at f9f80000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [b4] Vendor Specific Information <?>
Capabilities: [100] Virtual Channel <?>
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information <?>
Kernel driver in use: nvidia
00: de 10 a3 0c 07 00 10 00 a2 00 00 03 00 00 80 00
10: 00 00 00 fa 0c 00 00 d0 00 00 00 00 0c 00 00 ce
20: 00 00 00 00 01 dc 00 00 00 00 00 00 42 38 46 12
30: 00 00 00 00 60 00 00 00 00 00 00 00 03 01 00 00
40: 42 38 46 12 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 03 00 08 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 b4 02 00 e0 8d 2c 01
80: 10 29 00 00 02 2d 05 00 48 01 02 11 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00
a0: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00
b0: 00 00 00 00 09 00 14 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0d:00.1 Audio device [0403]: nVidia Corporation Device [10de:0be4] (rev a1)
Subsystem: eVga.com. Corp. Device [3842:1246]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin B routed to IRQ 5
Region 0: Memory at fbcfc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <1us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
00: de 10 e4 0b 06 00 10 00 a1 00 03 04 40 00 80 00
10: 00 c0 cf fb 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 42 38 46 12
30: 00 00 00 00 60 00 00 00 00 00 00 00 05 02 00 00
40: 42 38 46 12 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 03 00 08 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 00 02 00 a0 8d 2c 01
80: 10 29 01 00 02 2d 04 00 4b 01 02 11 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0e:00.0 SATA controller [0106]: Device [1b4b:9123] (rev 10) (prog-if 01 [AHCI 1.0])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7666]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 38
Region 0: I/O ports at ec00 [size=8]
Region 1: I/O ports at e880 [size=4]
Region 2: I/O ports at e800 [size=8]
Region 3: I/O ports at e480 [size=4]
Region 4: I/O ports at e400 [size=16]
Region 5: Memory at fbdff800 (32-bit, non-prefetchable) [size=2K]
Expansion ROM at fbde0000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: feeff00c Data: 41e1
Capabilities: [70] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <1us, L1 <8us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: ahci
00: 4b 1b 23 91 07 04 10 00 10 01 06 01 00 00 00 00
10: 01 ec 00 00 81 e8 00 00 01 e8 00 00 81 e4 00 00
20: 01 e4 00 00 00 f8 df fb 00 00 00 00 62 14 66 76
30: 00 00 de fb 40 00 00 00 00 00 00 00 03 01 00 00
40: 01 50 03 40 00 00 00 00 00 00 00 00 00 00 00 00
50: 05 70 01 00 0c f0 ef fe e1 41 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 10 00 12 00 02 87 28 00 10 20 09 00 12 3c 03 00
80: 40 00 12 10 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 10 00 00 00 00 00 00 00 00 00 00 00
a0: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0f:00.0 USB Controller [0c03]: NEC Corporation Device [1033:0194] (rev 03) (prog-if 30)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7666]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fbefe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [90] MSI-X: Enable- Count=8 Masked-
Vector table: BAR=0 offset=00001000
PBA: BAR=0 offset=00001080
Capabilities: [a0] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff
Capabilities: [150] #18
Kernel driver in use: xhci_hcd
00: 33 10 94 01 06 00 10 00 03 30 03 0c 40 00 00 00
10: 04 e0 ef fb 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 66 76
30: 00 00 00 00 50 00 00 00 00 00 00 00 03 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 70 c3 c9 08 00 00 00 00 00 00 00 00 00 00 00
60: 30 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 05 90 86 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 11 a0 07 00 00 10 00 00 80 10 00 00 00 00 00 00
a0: 10 00 02 00 c0 8f 00 00 00 28 19 00 12 ec 07 00
b0: 40 01 12 10 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 10 08 00 00 00 00 00 00 00 00 00 00
d0: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: fc 1f 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 08 14 60 00 00 00 00 00 00 00 00 00 00 00 00 00
-----
2
6
Hello,
Flashrom accepts the mainboard Intel D510MO??? It works with the D510MO?
1
0
Best regards,
Anton Kochkov.
---------- Forwarded message ----------
From: Антон Кочков <anton.kochkov(a)gmail.com>
Date: 2011/5/24
Subject: Re: [flashrom] [patch] VT6421A LPC programmer
To: "Jonathan A. Kollasch" <jakllsch(a)kollasch.net>
This patch not working on most VT6421A.
May be we need check for flash access before writing/reading chip?
flash_access_control(PCI_dev via_device)
{
count = 0;
while (c<300) {
access_mode = pci_read_byte(via_device, 0x68);
if (access_mode & (1<<6)) == (1<<6) {
return access_granted;
} else {
delay(0xA);
}
c++;
}
return access_restricted;
}
Best regards,
Anton Kochkov.
On Tue, Jan 4, 2011 at 06:23, Jonathan A. Kollasch
<jakllsch(a)kollasch.net> wrote:
> Add VIA VT6421A LPC programmer driver.
>
> Signed-off-by: Jonathan Kollasch <jakllsch(a)kollasch.net>
>
> _______________________________________________
> flashrom mailing list
> flashrom(a)flashrom.org
> http://www.flashrom.org/mailman/listinfo/flashrom
>
1
0
Sorry, forgot this:
Looks like it need for:
pci_dword_write(via_device, 0x30, 0xFFFFFFFF);
some delay;
pci_dword_write(via_device, 0x30, 0);
before any access to 0x6x registers to VIA device
Best regards,
Anton Kochkov.
2011/5/24 Антон Кочков <anton.kochkov(a)gmail.com>:
> This patch not working on most VT6421A.
>
> May be we need check for flash access before writing/reading chip?
>
> flash_access_control(PCI_dev via_device)
> {
> count = 0;
> while (c<300) {
> access_mode = pci_read_byte(via_device, 0x68);
> if (access_mode & (1<<6)) == (1<<6) {
> return access_granted;
> } else {
> delay(0xA);
> }
> c++;
> }
> return access_restricted;
> }
>
> Best regards,
> Anton Kochkov.
>
>
>
>
> On Tue, Jan 4, 2011 at 06:23, Jonathan A. Kollasch
> <jakllsch(a)kollasch.net> wrote:
>> Add VIA VT6421A LPC programmer driver.
>>
>> Signed-off-by: Jonathan Kollasch <jakllsch(a)kollasch.net>
>>
>> _______________________________________________
>> flashrom mailing list
>> flashrom(a)flashrom.org
>> http://www.flashrom.org/mailman/listinfo/flashrom
>>
>
1
0