flashrom

flashrom@flashrom.org

9164 discussions

Start a nNew thread

Log for Gigabyte GA-H61M-D2H-USB3
by user 27 Jul '12

27 Jul '12

Log for Gigabyte GA-H61M-D2H-USB3 motherboard on a Intel H61 chipset for read and write operations.

2 1

P5B-VM DO support
by Justin Bogner 27 Jul '12

27 Jul '12

Hello, I tried out flashrom on one of my machines and it asked me to send a verbose log here, since my mainboard isn't listed on the supported hardware page. The non-verbose log errors with "FREG4: WARNING: Platform Data region is locked" and the chipset is Intel ICH8DO. The mainboard is this one: http://www.asus.com/Motherboards/Intel_Socket_775/P5BVM_DO flashrom v0.9.5.2-r1517 on Linux 3.2.0-24-generic (x86_64), built with libpci 3.1.8, GCC 4.6.3, little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 1787M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1040 us, 10000 myus = 9987 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "P5B-VM DO" DMI string baseboard-version: "Rev 1.xx" DMI string chassis-type: "Desktop" Found chipset "Intel ICH8DO" with PCI ID 8086:2814. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode disabled 0xffd00000/0xff900000 FWH decode disabled 0xffc80000/0xff880000 FWH decode disabled 0xffc00000/0xff800000 FWH decode disabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0 Root Complex Register Block address = 0xfed1c000 GCS = 0x10464: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3020 0x04: 0x6008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=0 Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00000000 (FADDR) 0x50: 0x00000f0f (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0f, BRRA 0x0f 0x54: 0x00000000 FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-write. 0x58: 0x01ff0100 FREG1: BIOS region (0x00100000-0x001fffff) is read-write. 0x5C: 0x00fd0001 FREG2: Management Engine region (0x00001000-0x000fdfff) is read-write. 0x60: 0x00ff00fe FREG3: Gigabit Ethernet region (0x000fe000-0x000fffff) is read-write. 0x64: 0x00000000 FREG4: WARNING: Platform Data region (0x00000000-0x00000fff) is locked. Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on http://flashrom.org/Supported_hardware#Supported_mainboards yet. Writes have been disabled. You can enforce write support with the ich_spi_force programmer option, but it will most likely harm your hardware! If you force flashrom you will get no support if something breaks. 0x90: 0x04 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0x004140 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=4, DBC=1, SME=0, SCF=0 0x94: 0x5006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xC1: 0xffffffff (VSCC) VSCC: BES=0x3, WG=1, WSR=1, WEWS=1, EO=0xff, VCL=1 SPI Read Configuration: prefetching disabled, caching enabled, OK. The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST SST25LF040A, 512 kB: program_opcodes: preop=5006 optype=462b opmenu=05ab0302c79f0190 on-the-fly OPCODE (0xAB) re-programmed, op-pos=2 probe_spi_res2: id1 0xbf, id2 0x41 Probing for SST SST25LF080A, 1024 kB: probe_spi_res2: id1 0xbf, id2 0x41 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xbf, id2 0x41 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Chip status register is 00 Chip status register: Block Protect Write Disable (BPL) is not set Chip status register: Auto Address Increment Programming (AAI) is not set Chip status register: Bit 5 / Block Protect 3 (BP3) is not set Chip status register: Bit 4 / Block Protect 2 (BP2) is not set Chip status register: Bit 3 / Block Protect 1 (BP1) is not set Chip status register: Bit 2 / Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Resulting block protection : none Found SST flash chip "SST25VF016B" (2048 kB, SPI) at physical address 0xffe00000. Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xbf, id2 0x41 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xbf, id2 0x41 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Unknown SFDP-capable chip, 0 kB: program_opcodes: preop=5006 optype=462b opmenu=055a0302c79f0190 on-the-fly OPCODE (0x5A) re-programmed, op-pos=2 No SFDP signature found. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2541 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xbf, id2 0x41 Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x9f, id2 0xfe, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x9f, id2 0xfe, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x9f, id2 0xfe, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x93, id2 0x75, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x9f, id2 0xfe, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x9f, id2 0xfe, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x41, id2 0x53, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x41, id2 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash content Found SST flash chip "SST25VF016B" (2048 kB, SPI). No operations were specified. Restoring MMIO space at 0x7f24359380bc Restoring MMIO space at 0x7f24359380b8 Restoring MMIO space at 0x7f24359380b6 Restoring MMIO space at 0x7f24359380b4 Restoring PCI config space for 00:1f:0 reg 0xdc

2 2

Re: [flashrom] thank you!
by Stefan Tauner 27 Jul '12

27 Jul '12

On Thu, 26 Jul 2012 16:07:06 +0000 "Corcoran, Mike" <mike.corcoran(a)wright.edu> wrote: Hello Mike, you are welcome (be aware of the double twist :) > Found SST flash chip "SST39VF010" (128 kB, Parallel). > === > This flash part has status UNTESTED for operations: WRITE > The test status of this chip may have been updated in the latest > development > version of flashrom. If you are running the latest development version, > please email a report to flashrom(a)flashrom.org if any of the above > operations > work correctly for you with this flash part. Please include the flashrom > output with the additional -V option for all operations you tested (-V, > -Vr, > -VE, -Vw), and mention which mainboard or programmer you tested. > Please mention your board in the subject line. Thanks for your help! If you like to help us, you can test writing the chip as well. Since erasing has worked, it is very likely that writing will too, but it would still be nice to know. Also, if you ever want to re-enable the firmware of the controller you would already know that it works (or if it currently does not work, you will have an updated, working version of flashrom already and dont need to wait ;) You can use any file of exactly 128 * 1024 B that does not contain 0xFF only, or the data already in the chip (flashrom would skip writing then). A file created by dd if=/dev/urandom of=testfile-128kB.bin bs=1k count=128 would be ok. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

ASRock A780FullHD: Experience upgrading from BIOS 1.00 to 1.70
by Paul Menzel 27 Jul '12

27 Jul '12

Dear flashrom folks, first thanks to stefanct and patrickg in #flashrom. I tried to upgrade the BIOS of the ASRock A780FullHD [1] from version 1.00 to 1.70 [2]. To keep the MAC address of the board I compared the the 1.00 image read with flashrom from my board and 1.00 vendor image from [2]. After converting them with `od -tx1 -Ax` I compared both with `diff -u`. $ diff -u /tmp/vendor /tmp/myimage --- /tmp/3 2012-07-25 17:00:51.000000000 +0200 +++ /tmp/4 2012-07-25 17:22:56.000000000 +0200 @@ -50239,6 +50239,47 @@ 0dfff0 53 43 30 38 30 30 00 c0 8d d6 44 2b 14 00 fe 3f 0e0000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff * +0ec000 05 00 00 00 00 08 00 00 10 00 01 ff ff ff ff ff +0ec010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff +* +0ec800 00 80 01 00 40 00 00 08 10 00 01 ff ff ff ff ff +0ec810 00 19 66 8b 09 1a 2e ff ff ff ff ff ff ff ff ff +0ec820 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff +* +0ec840 81 00 02 00 00 03 40 08 10 00 01 ff ff ff ff ff +0ec850 10 04 01 00 01 00 00 00 01 00 40 00 01 00 80 00 +0ec860 01 00 a0 00 00 00 00 00 00 00 00 00 01 00 c0 00 +0ec870 01 00 e0 00 e0 3f 38 00 e0 3f 18 00 00 00 00 00 +0ec880 e0 3f 18 00 46 00 00 00 00 00 00 00 25 20 00 00 +0ec890 13 91 16 0c 20 12 a2 20 69 80 10 37 ff 02 00 ae +0ec8a0 03 00 00 00 00 00 2f 01 00 00 00 00 00 00 00 00 +0ec8b0 01 ff ff ff 22 13 11 10 15 15 15 15 15 14 14 15 +0ec8c0 15 00 00 00 00 2f 34 10 16 15 15 15 15 15 16 15 +0ec8d0 16 00 00 00 39 00 00 00 16 00 00 00 39 00 00 00 +0ec8e0 39 00 00 00 39 00 00 00 22 12 11 20 16 16 16 16 +0ec8f0 16 16 16 16 16 00 00 00 00 2f 2b 00 15 15 15 15 +0ec900 14 14 14 15 15 00 00 00 3b 00 00 00 3b 00 00 00 +0ec910 3b 00 00 00 3b 00 00 00 ef be ad de 01 ff ff ff +0ec920 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff +* +0ecb40 08 00 03 00 eb 00 40 0b 10 00 01 ff ff ff ff ff +0ecb50 ff 04 20 08 8b 31 00 00 00 00 00 00 00 00 00 00 +0ecb60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +* +0ecb80 00 00 04 48 48 52 52 43 43 55 55 00 00 00 00 00 +0ecb90 00 00 00 01 00 02 03 04 05 06 07 00 00 00 00 02 +0ecba0 3d f7 75 18 00 00 00 00 00 00 00 00 00 00 00 00 +0ecbb0 00 00 00 00 00 00 00 00 01 00 02 03 04 05 06 07 +0ecbc0 08 09 0a 0b 00 00 00 00 01 52 5c 00 00 00 00 00 +0ecbd0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 +0ecbe0 00 00 00 00 00 00 01 02 03 00 01 02 03 00 01 02 +0ecbf0 03 04 05 00 00 00 00 02 58 cc 42 ca 00 00 00 00 +0ecc00 00 01 02 03 00 00 00 00 01 d1 6a 00 00 00 00 00 +0ecc10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 02 +0ecc20 03 04 05 06 07 08 09 00 00 00 00 0d 00 04 00 10 +0ecc30 03 2b 0c 10 00 01 ff ff ff ff ff ff ff ff ff ff +0ecc40 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff +* 0f0000 5e 9f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0f0010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * The MAC address is stored in the line +0ec810 00 19 66 8b 09 1a 2e ff ff ff ff ff ff ff ff ff although it is not clear what the `2e` means. So the vendor image leaves the area from 0e0000 to 0effff filled with ff. I would guess that on my board that area is filled with the chosen configurations in the BIOS setup menu. To keep that configuration I thought to not overwrite that area (0e0000– 0effff). The layout stuff in flashrom makes that possible. $ more asrock-a780fullhd-BIOS-flashrom.layout 000000:0dffff vendor1 0e0000:0effff custom 0f0000:0fffff vendor2 $ sudo ./flashrom -p internal --layout asrock-a780fullhd-BIOS-flashrom.layout --image vendor1 --image vendor2 -w A780FHD1.70 -o flashrom-w-A780FHD1.70.txt That worked without problem and reboot worked. The BIOS options were still reset to default due to some checksum error or other check stored in CMOS(?) or NVRAM(?). Starting Debian then worked. But after being happy suddenly the system just shut down after around twelve minutes. I heard some click sound from the case (like when rebooting or so) and the monitor just went black. The fans – I do not know which, probably from the power supply – were still running. I turned off the system by holding the power button for ten seconds. I did not find anything in the system logs. So it might be due to the new BIOS version 1.70, some random Debian error, I did not experience before and just happened by coincident, or something else. Although the timing after the BIOS upgrade and the running fans point to the BIOS in my opinion. Starting the system worked luckily and to not take any chances, I wrote the 1.00 BIOS image, which I had read with flashrom from the board in the very beginning, to the chip. Shutting down the system and starting it again did not work. Nothing on the monitor. Luckily turning the system off again and plugging out the power cord worked. Though note that the BIOS setting were again lost and set back to the defaults. This is probably again due to some checksum stored in CMOS/NVRAM(?). So all in all this is very strange. Especially since it looks like the BIOS settings were reset after each upgrade and downgrade process. If you have any ideas what happened here, I will be happy to hear them. Maybe in the future I will try upgrading again but maybe first write the pure vendor image overwriting all of the flash chip and later on trying to get the MAC address back. Thanks, Paul [1] http://www.asrock.com/mb/overview.asp?Model=A780FullHD [2] http://www.asrock.com/mb/download.asp?Model=A780FullHD&o=BIOS

2 1

thank you!
by Corcoran, Mike 26 Jul '12

26 Jul '12

Thank you for writing such a wonderful tool! I have been fighting this generic Sata disk controller card I bought for my home machine with a SIL3124 chip and having trouble with the Bios on it conflicting with the motherboard bios. I wanted to boot from my motherboard, but no matter how I set the boot disk priority on the motherboard, the system insisted on trying to boot from the SIL3124 card. I wanted to erase the bios on the SIL3124 card but did not know how. I found Your tool via google, and it worked flawlessly! Thanks again! [root@vmware]# flashrom --erase -V -p satasii flashrom v0.9.5.2-r1515 on Linux 2.6.32-220.23.1.el6.x86_64 (x86_64), built with libpci 3.1.4, GCC 4.4.6 20110731 (Red Hat 4.4.6-3), little endian flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OS timer resolution is 1 usecs, 3656M loops per second, 10 myus = 9 us, 100 myus = 104 us, 1000 myus = 1013 us, 10000 myus = 10021 us, 4 myus = 4 us, OK. Initializing satasii programmer Found "Silicon Image SiI 3124 PCI-X SATA Ctrl" (1095:3124, BDF 03:04.0). Requested BAR is MEM, 64bit, not prefetchable Mapping SATA SIL registers at 0xfbbff000, unaligned size 0x100. The following protocols are supported: Parallel. Probing for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BB, 256 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F002(N)BT, 256 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F016D, 2048 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F040B, 512 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29F080B, 1024 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BB, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV001BT, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BB, 256 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV002BT, 256 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BB, 512 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV004BT, 512 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BB, 1024 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV008BT, 1024 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV040B, 512 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMD Am29LV081B, 1024 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002B, 256 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29002T, 256 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for AMIC A29040B, 512 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT29C512, 64 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for Atmel AT29C010A, 128 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for Atmel AT29C020, 256 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for Atmel AT29C040A, 512 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for Atmel AT49BV512, 64 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for Atmel AT49F020, 256 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for Atmel AT49F002(N), 256 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for Atmel AT49F002(N)T, 256 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for Catalyst CAT28F512, 64 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for Bright BM29F040, 512 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for EMST F49B002UA, 256 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for Eon EN29F010, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)B, 256 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Eon EN29F002(A)(N)T, 256 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004BC, 512 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F004TC, 512 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Fujitsu MBM29F400BC, 512 kB: probe_m29f400bt: id1 0x55, id2 0x78 Probing for Fujitsu MBM29F400TC, 512 kB: probe_m29f400bt: id1 0x55, id2 0x78 Probing for Hyundai HY29F002T, 256 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for Hyundai HY29F002B, 256 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for Hyundai HY29F040A, 512 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F001BN/BX-B, 128 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for Intel 28F001BN/BX-T, 128 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for Intel 28F002BC/BL/BV/BX-T, 256 kB: probe_82802ab: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F008S3/S5/SC, 512 kB: probe_82802ab: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-B, 512 kB: probe_82802ab: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F004B5/BE/BV/BX-T, 512 kB: probe_82802ab: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-B, 512 kB: probe_82802ab: id1 0x55, id2 0x78, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 28F400BV/BX/CE/CV-T, 512 kB: probe_82802ab: id1 0x55, id2 0x78, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001B, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F001T, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002(N)B, 256 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F002(N)T, 256 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29F040, 512 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX29LV040, 512 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for MoselVitelic V29C51000B, 64 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for MoselVitelic V29C51000T, 64 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for MoselVitelic V29C51400B, 512 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for MoselVitelic V29C51400T, 512 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for MoselVitelic V29LC51000, 64 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for MoselVitelic V29LC51001, 128 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for MoselVitelic V29LC51002, 256 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for PMC Pm29F002T, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm29F002B, 256 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV010, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV020, 256 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm39LV040, 512 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LH28F008BJT-BTLZ1, 1024 kB: probe_82802ab: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST28SF040A, 512 kB: probe_82802ab: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST29EE010, 128 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for SST SST29LE010, 128 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for SST SST29EE020A, 256 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for SST SST29LE020, 256 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for SST SST39SF512, 64 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for SST SST39SF010A, 128 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for SST SST39SF040, 512 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for SST SST39VF512, 64 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for SST SST39VF010, 128 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Found SST flash chip "SST39VF010" (128 kB, Parallel) on satasii. Probing for SST SST39VF020, 256 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for SST SST39VF040, 512 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for SST SST39VF080, 1024 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for ST M29F002B, 256 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F002T/NT, 256 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F040B, 512 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29F400BB, 512 kB: probe_m29f400bt: id1 0x55, id2 0x78 Probing for ST M29F400BT, 512 kB: probe_m29f400bt: id1 0x55, id2 0x78 Probing for ST M29W010B, 128 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W040B, 512 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M29W512B, 64 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for TI TMS29F002RB, 256 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for TI TMS29F002RT, 256 kB: probe_jedec_common: id1 0x55, id2 0xaa, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012-old, 128 kB: Old Winbond W29* probe method disabled because the probing sequence puts the AMIC A49LF040A in a funky state. Use 'flashrom -c W29C010(M)/W29C011A/W29EE011/W29EE012-old' if you have a board with such a chip. Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for Winbond W29C020(C)/W29C022, 256 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for Winbond W29C040/P, 512 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for Winbond W39L040, 512 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for Winbond W49F002U/N, 256 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Probing for Winbond W49F020, 256 kB: probe_jedec_common: id1 0xbf, id2 0xd5 Found SST flash chip "SST39VF010" (128 kB, Parallel). === This flash part has status UNTESTED for operations: WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -VE, -Vw), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:E, 0x001000-0x001fff:E, 0x002000-0x002fff:E, 0x003000-0x003fff:E, 0x004000-0x004fff:E, 0x005000-0x005fff:E, 0x006000-0x006fff:E, 0x007000-0x007fff:E, 0x008000-0x008fff:E, 0x009000-0x009fff:E, 0x00a000-0x00afff:E, 0x00b000-0x00bfff:E, 0x00c000-0x00cfff:E, 0x00d000-0x00dfff:E, 0x00e000-0x00efff:E, 0x00f000-0x00ffff:E, 0x010000-0x010fff:E, 0x011000-0x011fff:E, 0x012000-0x012fff:E, 0x013000-0x013fff:E, 0x014000-0x014fff:E, 0x015000-0x015fff:E, 0x016000-0x016fff:E, 0x017000-0x017fff:E, 0x018000-0x018fff:E, 0x019000-0x019fff:E, 0x01a000-0x01afff:E, 0x01b000-0x01bfff:E, 0x01c000-0x01cfff:E, 0x01d000-0x01dfff:E, 0x01e000-0x01efff:E, 0x01f000-0x01ffff:E Erase/write done. [root@vmware]# Mike -- Mike Corcoran Wright State University, Information Security and Systems Support Voice:937-775-2431, Fax:937-775-4049 http://www.wright.edu/security/ Don't be scammed, CaTS will NEVER ask for your password via e-mail!

1 0

flashrom v0.9.5.2-r1553: Success with ASRock A780FullHD
by Paul Menzel 26 Jul '12

26 Jul '12

Dear flashrom folks, I successfully read, erased and wrote the flash chip of my ASRock A780FullHD [1]. Here is the short log of erasing the chip. $ sudo ./flashrom -p internal -E -o flashrom-E.txt flashrom v0.9.5.2-r1553 on Linux 3.5.0+ (i686) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "AMD SB7x0/SB8x0/SB9x0". Enabling flash write... OK. Found Macronix flash chip "MX25L8005" (1024 kB, SPI) at physical address 0xfff00000. Erasing and writing flash chip... Erase/write done. Please find the verbose log files of all three operations attached. Writing was tested by reading the content of the flash chip, erasing the flash chip and writing the read image back. Thanks, Paul [1] http://www.asrock.com/mb/overview.asp?Model=A780FullHD

1 0

Numonyx N25Q064 (second try)
by David Hendricks 26 Jul '12

26 Jul '12

This patch differentiates between the N25Q064 1.8V version and 3.0V version which have different JEDEC IDs. It extends the chip name to include the first few characters in the part number. The first two of those characters indicate the process technology (65nm) and feature set, neither of which matter for Flashrom. The third and fourth characters specify voltage and block/sector size and uniformity, which are important. To abstract the irrelevant portions of the part number leading up to the characters we care about, dots are used. This helps prevent unwanted changes in chip name that can break fragile scripts and confuse people. More about this schema here: http://www.flashrom.org/pipermail/flashrom/2012-July/009595.html Signed-off-by: David Hendricks <dhendrix(a)google.com> Index: flashchips.c =================================================================== --- flashchips.c (revision 1553) +++ flashchips.c (working copy) @@ -5425,12 +5425,16 @@ { .vendor = "Numonyx", - .name = "N25Q064", + /* ..1E = 1.8V, uniform 64KB/4KB blocks/sectors */ + .name = "N25Q064..1E", .bustype = BUS_SPI, .manufacture_id = ST_ID, - .model_id = ST_N25Q064, + .model_id = ST_N25Q064__1E, .total_size = 8192, .page_size = 256, + /* supports SFDP */ + /* OTP: 64B total; read 0x4B, write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -5450,9 +5454,44 @@ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, + .voltage = {1700, 2000}, }, { + .vendor = "Numonyx", + /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */ + .name = "N25Q064..3E", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_N25Q064__3E, + .total_size = 8192, + .page_size = 256, + /* supports SFDP */ + /* OTP: 64B total; read 0x4B, write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 2048 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { .vendor = "PMC", .name = "Pm25LV010", .bustype = BUS_SPI, Index: flashchips.h =================================================================== --- flashchips.h (revision 1553) +++ flashchips.h (working copy) @@ -586,7 +586,8 @@ #define ST_M29W010B 0x23 #define ST_M29W040B 0xE3 #define ST_M29W512B 0x27 -#define ST_N25Q064 0xBA17 +#define ST_N25Q064__3E 0xBA17 /* N25Q064, 3V, 64KB/4KB blocks/sectors */ +#define ST_N25Q064__1E 0xBB17 /* N25Q064, 1.8V, 64KB/4KB blocks/sectors */ #define SYNCMOS_MVC_ID 0x40 /* SyncMOS (SM) and Mosel Vitelic Corporation (MVC) */ #define MVC_V29C51000T 0x00 -- David Hendricks (dhendrix) Systems Software Engineer, Google Inc.

1 0

Re: [flashrom] How to suffix similar-but-different parts?
by Stefan Tauner 26 Jul '12

26 Jul '12

On Wed, 25 Jul 2012 14:49:38 -0700 David Hendricks <dhendrix(a)google.com> wrote: > > alternatively we could just ignore that problem (it is a future problem > > after all) and use N25Q064A11 and N25Q064A13. > > > > Please let's not do that :-) It causes headaches if the information > presented falls out of date or shows up incorrect. we cant predict what vendors do. if they decide to give N25Q064B13 another id the .. representation is not correct too. we cant save the world just make it as good as we can :) -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] How to suffix similar-but-different parts?
by Stefan Tauner 26 Jul '12

26 Jul '12

On Wed, 25 Jul 2012 12:14:33 -0700 David Hendricks <dhendrix(a)google.com> wrote: > There's a SPI chip named "N25Q064" with 1.8V and 3V variants N25Q064A11 and > N25Q064A13, respectively. The 1.8V has A11 suffixed, and the 3V version has > A13 suffixed. The 'A' indicates the process technology which is likely to > change without a change of device ID, so it's likely that we'll see > something like N25Q064B11 or N25Q064B13 in the future. > > Fortunately, the two variants have different JEDEC IDs (0xBA17 and 0xBB17). > So at least we can tell them apart via probing. > > stefanct and I were discussing how to name this chip couldn't really come > up with a good solution. I am thinking that "N25Q064" is sufficient and > that we should just re-use the same .name for two chip entries with > different .voltage parameters. > > Thoughts? > datasheets for the devices in question: <dhendrix> 3V version: http://www.micron.com/~/media/Documents/Products/Data%20Sheet/NOR%20Flash/S… <dhendrix> 1.8V version: http://www.micron.com/~/media/Documents/Products/Data%20Sheet/NOR%20Flash/S… david: you dont give a rationale why you think that N25Q064 is enough. my argumnt why it is not enough: the .name is used to distinguish what flashrom defines as individual chips when presenting them to the user. so it is not enough that flashrom can distinguish the chips by their IDs but also the user must be able to tell the difference hence there must be no duplicative names. fwiw: i think we need a place holder for "any character" in model names and propose "." so in this case: N25Q064..1 N25Q064..3 rationale: easily understandable, regex semantic, not part of actual chip names, non-distracting. alternatively we could just ignore that problem (it is a future problem after all) and use N25Q064A11 and N25Q064A13. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

How to suffix similar-but-different parts?
by David Hendricks 25 Jul '12

25 Jul '12

There's a SPI chip named "N25Q064" with 1.8V and 3V variants N25Q064A11 and N25Q064A13, respectively. The 1.8V has A11 suffixed, and the 3V version has A13 suffixed. The 'A' indicates the process technology which is likely to change without a change of device ID, so it's likely that we'll see something like N25Q064B11 or N25Q064B13 in the future. Fortunately, the two variants have different JEDEC IDs (0xBA17 and 0xBB17). So at least we can tell them apart via probing. stefanct and I were discussing how to name this chip couldn't really come up with a good solution. I am thinking that "N25Q064" is sufficient and that we should just re-use the same .name for two chip entries with different .voltage parameters. Thoughts? -- David Hendricks (dhendrix) Systems Software Engineer, Google Inc.

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom