flashrom

flashrom@flashrom.org

9164 discussions

[PATCH] Add support for generic SPI RES matching.
by Stefan Tauner 31 Aug '12

31 Aug '12

Support generic 1-byte SPI RES matching (low match quality) and enable read support by guessing the chip size from the ID. Support generic 2-byte SPI RES matching (high match quality). Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- chipdrivers.h | 1 + flashchips.c | 31 +++++++++++++++++++++++++++++ flashrom.c | 4 +++- spi25.c | 61 +++++++++++++++++++++++++++++++++++++++++++++------------ 4 files changed, 84 insertions(+), 13 deletions(-) diff --git a/chipdrivers.h b/chipdrivers.h index b43e16e..63c5d37 100644 --- a/chipdrivers.h +++ b/chipdrivers.h @@ -33,6 +33,7 @@ int probe_spi_rdid4(struct flashctx *flash); int probe_spi_rems(struct flashctx *flash); int probe_spi_res1(struct flashctx *flash); int probe_spi_res2(struct flashctx *flash); +int probe_spi_automagic_res1(struct flashctx *flash); int spi_write_enable(struct flashctx *flash); int spi_write_disable(struct flashctx *flash); int spi_block_erase_20(struct flashctx *flash, unsigned int addr, unsigned int blocklen); diff --git a/flashchips.c b/flashchips.c index 8fe50bd..c175108 100644 --- a/flashchips.c +++ b/flashchips.c @@ -9662,6 +9662,24 @@ const struct flashchip flashchips[] = { { .vendor = "Generic", + .name = "unknown SPI chip (RES1)", + .bustype = BUS_SPI, + .manufacture_id = GENERIC_MANUF_ID, + .model_id = GENERIC_DEVICE_ID, + .total_size = 0, + .page_size = 256, + .tested = TEST_BAD_PREW, + .probe = probe_spi_automagic_res1, + .probe_timing = TIMING_ZERO, + .block_erasers = {}, + .unlock = spi_disable_blockprotect, + .write = NULL, + .read = spi_chip_read, + .voltage = {}, + }, + + { + .vendor = "Generic", .name = "unknown SPI chip (REMS)", .bustype = BUS_SPI, .manufacture_id = GENERIC_MANUF_ID, @@ -9673,5 +9691,18 @@ const struct flashchip flashchips[] = { .write = NULL, }, + { + .vendor = "Generic", + .name = "unknown SPI chip (RES2)", + .bustype = BUS_SPI, + .manufacture_id = GENERIC_MANUF_ID, + .model_id = GENERIC_DEVICE_ID, + .total_size = 0, + .page_size = 256, + .tested = TEST_BAD_PREW, + .probe = probe_spi_res2, + .write = NULL, + }, + { NULL } }; diff --git a/flashrom.c b/flashrom.c index fdc5412..148f969 100644 --- a/flashrom.c +++ b/flashrom.c @@ -1028,7 +1028,9 @@ int probe_flash(struct registered_programmer *pgm, int startchip, struct flashct if (startchip == 0) break; /* Not the first flash chip detected on this bus, but not a generic match either. */ - if ((flash->chip->model_id != GENERIC_DEVICE_ID) && (flash->chip->model_id != SFDP_DEVICE_ID)) + if ((flash->chip->manufacture_id != GENERIC_MANUF_ID) && + (flash->chip->model_id != GENERIC_DEVICE_ID) && + (flash->chip->model_id != SFDP_DEVICE_ID)) break; /* Not the first flash chip detected on this bus, and it's just a generic match. Ignore it. */ notfound: diff --git a/spi25.c b/spi25.c index 914b821..7d9e948 100644 --- a/spi25.c +++ b/spi25.c @@ -232,6 +232,7 @@ int probe_spi_rems(struct flashctx *flash) int probe_spi_res1(struct flashctx *flash) { + const struct flashchip *chip = flash->chip; static const unsigned char allff[] = {0xff, 0xff, 0xff}; static const unsigned char all00[] = {0x00, 0x00, 0x00}; unsigned char readarr[3]; @@ -265,18 +266,23 @@ int probe_spi_res1(struct flashctx *flash) msg_cdbg("%s: id 0x%x\n", __func__, id2); - if (id2 != flash->chip->model_id) - return 0; + if (id2 == flash->chip->model_id) { + /* Print the status register to tell the user about possible write protection. */ + spi_prettyprint_status_register(flash); - /* Print the status register to tell the - * user about possible write protection. - */ - spi_prettyprint_status_register(flash); - return 1; + return 1; + } + + /* Test if there is any device ID. */ + if (GENERIC_MANUF_ID == chip->manufacture_id && id2 == chip->model_id) + return 1; + + return 0; } int probe_spi_res2(struct flashctx *flash) { + const struct flashchip *chip = flash->chip; unsigned char readarr[2]; uint32_t id1, id2; @@ -289,13 +295,44 @@ int probe_spi_res2(struct flashctx *flash) msg_cdbg("%s: id1 0x%x, id2 0x%x\n", __func__, id1, id2); - if (id1 != flash->chip->manufacture_id || id2 != flash->chip->model_id) + if (id1 == chip->manufacture_id && id2 == chip->model_id) { + /* Print the status register to tell the + * user about possible write protection. + */ + spi_prettyprint_status_register(flash); + + return 1; + } + + /* Test if this is a pure vendor match. */ + if (id1 == chip->manufacture_id && GENERIC_DEVICE_ID == chip->model_id) + return 1; + + /* Test if there is any vendor ID and if this is indeed a two-byte RES. */ + if (GENERIC_MANUF_ID == chip->manufacture_id && id1 != 0xff && id1 != id2) + return 1; + + return 0; +} + +int probe_spi_automagic_res1(struct flashctx *flash) +{ + unsigned char readarr[1]; + unsigned int total_size; + uint32_t id1; + + if (spi_res(flash, readarr, 1)) return 0; - /* Print the status register to tell the - * user about possible write protection. - */ - spi_prettyprint_status_register(flash); + id1 = readarr[0]; + msg_cdbg("%s: id1 0x%02x\n", __func__, id1); + if (id1 < 0x10 || id1 > 0x17) { + msg_cdbg("RES ID out of bounds!\n"); + return 0; + } + total_size = (2 << id1) / 1024; + flash->chip->total_size = total_size; + flash->chip->tested = TEST_OK_PR | TEST_BAD_ERASE | TEST_BAD_WRITE; return 1; } -- Kind regards, Stefan Tauner

1 0

Re: [flashrom] [PATCH 2/3] Add RES/REMS support to all dummyflasher emulated chips.
by Carl-Daniel Hailfinger 31 Aug '12

31 Aug '12

Am 25.08.2012 22:35 schrieb Stefan Tauner: > Also, fix a few odd corner cases in RES/REMS support in dummyflasher emulation. > > Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> and committed in r1589. Regards, Carl-Daniel -- http://www.hailfinger.org/

1 0

[commit] r1589 - trunk
by repository service 31 Aug '12

31 Aug '12

Author: hailfinger Date: Thu Aug 30 23:41:00 2012 New Revision: 1589 URL: http://flashrom.org/trac/flashrom/changeset/1589 Log: Add RES/REMS support to all dummyflasher emulated chips as a test case. Fix a few odd corner cases in RES/REMS support in dummyflasher emulation which became noticeable once RES/REMS was used heavily. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/dummyflasher.c Modified: trunk/dummyflasher.c ============================================================================== --- trunk/dummyflasher.c Wed Aug 29 05:41:57 2012 (r1588) +++ trunk/dummyflasher.c Thu Aug 30 23:41:00 2012 (r1589) @@ -493,6 +493,9 @@ { unsigned int offs, i, toread; static int unsigned aai_offs; + const unsigned char sst25vf040_rems_response[2] = {0xbf, 0x44}; + const unsigned char sst25vf032b_rems_response[2] = {0xbf, 0x4a}; + const unsigned char mx25l6436_rems_response[2] = {0xc2, 0x16}; if (writecnt == 0) { msg_perr("No command sent to the chip!\n"); @@ -529,20 +532,54 @@ switch (writearr[0]) { case JEDEC_RES: - if (emu_chip != EMULATE_ST_M25P10_RES) + if (writecnt < JEDEC_RES_OUTSIZE) break; - /* Respond with ST_M25P10_RES. */ - if (readcnt > 0) - readarr[0] = 0x10; + /* offs calculation is only needed for SST chips which treat RES like REMS. */ + offs = writearr[1] << 16 | writearr[2] << 8 | writearr[3]; + offs += writecnt - JEDEC_REMS_OUTSIZE; + switch (emu_chip) { + case EMULATE_ST_M25P10_RES: + if (readcnt > 0) + memset(readarr, 0x10, readcnt); + break; + case EMULATE_SST_SST25VF040_REMS: + for (i = 0; i < readcnt; i++) + readarr[i] = sst25vf040_rems_response[(offs + i) % 2]; + break; + case EMULATE_SST_SST25VF032B: + for (i = 0; i < readcnt; i++) + readarr[i] = sst25vf032b_rems_response[(offs + i) % 2]; + break; + case EMULATE_MACRONIX_MX25L6436: + if (readcnt > 0) + memset(readarr, 0x16, readcnt); + break; + default: /* ignore */ + break; + } break; case JEDEC_REMS: - if (emu_chip != EMULATE_SST_SST25VF040_REMS) + /* REMS response has wraparound and uses an address parameter. */ + if (writecnt < JEDEC_REMS_OUTSIZE) break; - /* Respond with SST_SST25VF040_REMS. */ - if (readcnt > 0) - readarr[0] = 0xbf; - if (readcnt > 1) - readarr[1] = 0x44; + offs = writearr[1] << 16 | writearr[2] << 8 | writearr[3]; + offs += writecnt - JEDEC_REMS_OUTSIZE; + switch (emu_chip) { + case EMULATE_SST_SST25VF040_REMS: + for (i = 0; i < readcnt; i++) + readarr[i] = sst25vf040_rems_response[(offs + i) % 2]; + break; + case EMULATE_SST_SST25VF032B: + for (i = 0; i < readcnt; i++) + readarr[i] = sst25vf032b_rems_response[(offs + i) % 2]; + break; + case EMULATE_MACRONIX_MX25L6436: + for (i = 0; i < readcnt; i++) + readarr[i] = mx25l6436_rems_response[(offs + i) % 2]; + break; + default: /* ignore */ + break; + } break; case JEDEC_RDID: switch (emu_chip) {

1 0

[PATCH] Add Spi interface support for Tunnel Creek chipset (3)
by Feldschmid, Ingo 30 Aug '12

30 Aug '12

Hi, Last changes I submitted have been vs. trunk 1424. Since there is a new version out, I will resubmit the changes built against the new flashrom trunk version: The Intel Tunnel Creek chipset supports both an SPI and an LPC bus. Set chipset table entry for Tunnel Creek to new function "enable_flash_tunnelcreek", which will read the hardware straps and return support for the bus that has been used for booting. This function uses "ich_init_spi" with ich_generation set to 7 for initializing the SPI bus if necessary. SPI functionality tested on actual hardware (see attached file flashrom.log), Tunnel Creek LPC interface not tested yet (missing hardware for that). The attached patch has been created vs. flashrom trunk 1427. Signed-off-by: Ingo Feldschmid <ifel(a)msc-ge.com> Es gelten unsere Allgemeinen Leistungsbedingungen die unter http://www.msc-ge.com/alb abrufbar sind. Our standard terms and conditions apply which are available under http://www.msc-ge.com/alb . MSC Vertriebs GmbH Sitz der Gesellschaft: Industriestrasse 16, 76297 Stutensee Handelsregister: Mannheim, HRB Nr. 10 3631 Geschaftsfuhrung: Manfred Schwarztrauber, Lothar Kummerlin, Rudiger Kuhn, Silvano Geissler Umsatzsteuer ID Nr.: DE 143 585 507 WEEE Reg. Nr. : DE 31011852 Gleichmann & Co. Electronics GmbH Sitz der Gesellschaft: Schraderstrasse 44, 67227 Frankenthal Handelsregister: Ludwigshafen, HRB Nr. 21305 Geschaftsfuhrung: Manfred Schwarztrauber, Thomas Klein Umsatzsteuer ID Nr. : DE 148 421 329 WEEE Reg. Nr.: DE 72277043 Diese E-Mail enthalt vertrauliche und/ oder rechtlich geschutzte Informationen. Wenn Sie nicht der beabsichtigte Empfanger sind, informieren Sie bitte sofort den Absender und loschen Sie diese E-Mail. The information contained in this message is confidential and/ or protected by law. If you are not the intended recipient, please contact the sender and delete this message.

3 3

flashrom 9.6 read error
by jayasree.chakravarthy＠wipro.com 30 Aug '12

30 Aug '12

Hello, This is regarding the issue on flashrom tool read error. When we try to read/write/erase the bios image by using the below command, we are getting the transaction error opcode 0x03 failed. None of the flashrom command were working. Flashrom -p internal:ich_spi_force=yes -r a.bin Winbond chip: W25Q64, Rhel 6.0 OS, Please find attached the log. Is there any patch available to unlock the ME region? Could you please help us to resolve this issue? Thanks & Regards, Jayasree Please do not print this email unless it is absolutely necessary. The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com

2 3

[PATCH] Explicitly store max write size
by Carl-Daniel Hailfinger 29 Aug '12

29 Aug '12

This patch is not ready for merge, a few programmers will not compile because the conversion is unfinished. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-max_write_size/flash.h =================================================================== --- flashrom-max_write_size/flash.h (Revision 1587) +++ flashrom-max_write_size/flash.h (Arbeitskopie) @@ -141,7 +141,10 @@ int (*printlock) (struct flashctx *flash); int (*unlock) (struct flashctx *flash); - int (*write) (struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); + struct { + int (*write) (struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); + int max_write_size; + } writer; int (*read) (struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); struct voltage { uint16_t min; Index: flashrom-max_write_size/it87spi.c =================================================================== --- flashrom-max_write_size/it87spi.c (Revision 1587) +++ flashrom-max_write_size/it87spi.c (Arbeitskopie) @@ -379,7 +379,7 @@ * via a programmer parameter for the internal programmer. */ if ((chip->total_size * 1024 > 512 * 1024) || (chip->page_size > 256)) { - spi_chip_write_1(flash, buf, start, len); + spi_write_chunked(flash, buf, start, len, 1); } else { unsigned int lenhere; @@ -388,7 +388,7 @@ * whichever is smaller. */ lenhere = min(len, chip->page_size - start % chip->page_size); - spi_chip_write_1(flash, buf, start, lenhere); + spi_write_chunked(flash, buf, start, lenhere, 1); start += lenhere; len -= lenhere; buf += lenhere; @@ -401,7 +401,7 @@ buf += chip->page_size; } if (len) - spi_chip_write_1(flash, buf, start, len); + spi_write_chunked(flash, buf, start, len, 1); } return 0; Index: flashrom-max_write_size/jedec.c =================================================================== --- flashrom-max_write_size/jedec.c (Revision 1587) +++ flashrom-max_write_size/jedec.c (Arbeitskopie) @@ -329,58 +329,6 @@ return 0; } -static int write_byte_program_jedec_common(struct flashctx *flash, uint8_t *src, - chipaddr dst, unsigned int mask) -{ - int tried = 0, failed = 0; - chipaddr bios = flash->virtual_memory; - - /* If the data is 0xFF, don't program it and don't complain. */ - if (*src == 0xFF) { - return 0; - } - -retry: - /* Issue JEDEC Byte Program command */ - start_program_jedec_common(flash, mask); - - /* transfer data from source to destination */ - chip_writeb(flash, *src, dst); - toggle_ready_jedec(flash, bios); - - if (chip_readb(flash, dst) != *src && tried++ < MAX_REFLASH_TRIES) { - goto retry; - } - - if (tried >= MAX_REFLASH_TRIES) - failed = 1; - - return failed; -} - -/* chunksize is 1 */ -int write_jedec_1(struct flashctx *flash, uint8_t *src, unsigned int start, - unsigned int len) -{ - int i, failed = 0; - chipaddr dst = flash->virtual_memory + start; - chipaddr olddst; - unsigned int mask; - - mask = getaddrmask(flash->chip); - - olddst = dst; - for (i = 0; i < len; i++) { - if (write_byte_program_jedec_common(flash, src, dst, mask)) - failed = 1; - dst++, src++; - } - if (failed) - msg_cerr(" writing sector at 0x%lx failed!\n", olddst); - - return failed; -} - int write_page_write_jedec_common(struct flashctx *flash, uint8_t *src, unsigned int start, unsigned int page_size) { @@ -434,12 +382,7 @@ int unsigned len) { unsigned int i, starthere, lenhere; - /* FIXME: page_size is the wrong variable. We need max_writechunk_size - * in struct flashctx to do this properly. All chips using - * write_jedec have page_size set to max_writechunk_size, so - * we're OK for now. - */ - unsigned int page_size = flash->chip->page_size; + unsigned int page_size = flash->chip->writer.max_write_size; /* Warning: This loop has a very unusual condition and body. * The loop needs to go through each page with at least one affected Index: flashrom-max_write_size/dediprog.c =================================================================== --- flashrom-max_write_size/dediprog.c (Revision 1587) +++ flashrom-max_write_size/dediprog.c (Arbeitskopie) @@ -310,13 +310,15 @@ return 0; } -/* Bulk write interface, will write multiple chunksize byte chunks aligned to chunksize bytes. +/* Bulk write interface, will write multiple flash->writer.max_write_size byte + * chunks aligned to flash->writer.max_write_size bytes. * @chunksize length of data chunks, only 256 supported by now * @start start address * @len length * @dedi_spi_cmd dediprog specific write command for spi bus * @return 0 on success, 1 on failure */ +#error int chunksize must die as parameter static int dediprog_spi_bulk_write(struct flashctx *flash, uint8_t *buf, unsigned int chunksize, unsigned int start, unsigned int len, uint8_t dedi_spi_cmd) { @@ -326,6 +328,7 @@ * chunksize is the real data size per USB bulk transfer. The remaining * space in a USB bulk transfer must be filled with 0xff padding. */ + const unsigned int chunksize = flash->writer.max_write_size; const unsigned int count = len / chunksize; const char count_and_cmd[] = {count & 0xff, (count >> 8) & 0xff, 0x00, dedi_spi_cmd}; char usbbuf[512]; @@ -381,7 +384,7 @@ unsigned int start, unsigned int len, uint8_t dedi_spi_cmd) { int ret; - const unsigned int chunksize = flash->chip->page_size; + const unsigned int chunksize = flash->chip->writer.max_write_size; unsigned int residue = start % chunksize ? chunksize - start % chunksize : 0; unsigned int bulklen; Index: flashrom-max_write_size/spi25.c =================================================================== --- flashrom-max_write_size/spi25.c (Revision 1587) +++ flashrom-max_write_size/spi25.c (Arbeitskopie) @@ -834,42 +834,6 @@ return ret; } -int spi_byte_program(struct flashctx *flash, unsigned int addr, - uint8_t databyte) -{ - int result; - struct spi_command cmds[] = { - { - .writecnt = JEDEC_WREN_OUTSIZE, - .writearr = (const unsigned char[]){ JEDEC_WREN }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = JEDEC_BYTE_PROGRAM_OUTSIZE, - .writearr = (const unsigned char[]){ - JEDEC_BYTE_PROGRAM, - (addr >> 16) & 0xff, - (addr >> 8) & 0xff, - (addr & 0xff), - databyte - }, - .readcnt = 0, - .readarr = NULL, - }, { - .writecnt = 0, - .writearr = NULL, - .readcnt = 0, - .readarr = NULL, - }}; - - result = spi_send_multicommand(flash, cmds); - if (result) { - msg_cerr("%s failed during command execution at address 0x%x\n", - __func__, addr); - } - return result; -} - int spi_nbyte_program(struct flashctx *flash, unsigned int addr, uint8_t *bytes, unsigned int len) { @@ -1016,7 +980,7 @@ * spi_chip_write_256 have page_size set to max_writechunk_size, so * we're OK for now. */ - unsigned int page_size = flash->chip->page_size; + unsigned int page_size = flash->chip->writer.max_write_size; /* Warning: This loop has a very unusual condition and body. * The loop needs to go through each page with at least one affected @@ -1058,18 +1022,7 @@ int spi_chip_write_1(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) { - unsigned int i; - int result = 0; - - for (i = start; i < start + len; i++) { - result = spi_byte_program(flash, i, buf[i - start]); - if (result) - return 1; - while (spi_read_status_register(flash) & SPI_SR_WIP) - programmer_delay(10); - } - - return 0; + return spi_write_chunked(flash, buf, start, len, 1); } int default_spi_write_aai(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len) Index: flashrom-max_write_size/flashchips.c =================================================================== --- flashrom-max_write_size/flashchips.c (Revision 1587) +++ flashrom-max_write_size/flashchips.c (Arbeitskopie) @@ -52,7 +52,7 @@ * } * .printlock = Chip lock status function * .unlock = Chip unlock function - * .write = Chip write function + * .writer = Chip write function * .read = Chip read function * .voltage = Voltage range in millivolt */ @@ -79,7 +79,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -111,7 +111,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ }, @@ -143,7 +143,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ }, @@ -170,7 +170,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -197,7 +197,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -224,7 +224,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -255,7 +255,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, /* 3.0-3.6V for type -45R, others 2.7-3.6V */ }, @@ -286,7 +286,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, /* 3.0-3.6V for type -45R, others 2.7-3.6V */ }, @@ -318,7 +318,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, /* 3.0-3.6V for type -55, others 2.7-3.6V */ }, @@ -350,7 +350,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, /* 3.0-3.6V for type -55, others 2.7-3.6V */ }, @@ -382,7 +382,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {2700, 3600}, }, @@ -414,7 +414,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {2700, 3600}, }, @@ -446,7 +446,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600} /* 3.0-3.6V for type -70R, others 2.7-3.6V */ }, @@ -478,7 +478,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600} /* 3.0-3.6V for type -70R, others 2.7-3.6V */ }, @@ -505,7 +505,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, /* 3.0-3.6V for type -60R, others 2.7-3.6V*/ }, @@ -532,7 +532,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, /* 3.0-3.6V for type -70R, others 2.7-3.6V */ }, @@ -566,7 +566,7 @@ }, .printlock = spi_prettyprint_status_register_amic_a25l05p, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -600,7 +600,7 @@ }, .printlock = spi_prettyprint_status_register_amic_a25l05p, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -635,7 +635,7 @@ }, .printlock = spi_prettyprint_status_register_amic_a25l05p, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -670,7 +670,7 @@ }, .printlock = spi_prettyprint_status_register_amic_a25l05p, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -705,7 +705,7 @@ }, .printlock = spi_prettyprint_status_register_amic_a25l05p, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -740,7 +740,7 @@ }, .printlock = spi_prettyprint_status_register_amic_a25l05p, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -780,7 +780,7 @@ }, .printlock = spi_prettyprint_status_register_amic_a25l40p, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -815,7 +815,7 @@ }, .printlock = spi_prettyprint_status_register_amic_a25l40p, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -850,7 +850,7 @@ }, .printlock = spi_prettyprint_status_register_amic_a25l40p, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -888,7 +888,7 @@ }, .printlock = spi_prettyprint_status_register_amic_a25l40p, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -926,7 +926,7 @@ }, .printlock = spi_prettyprint_status_register_amic_a25l40p, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -958,7 +958,7 @@ }, .printlock = spi_prettyprint_status_register_amic_a25l40p, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -990,7 +990,7 @@ }, .printlock = spi_prettyprint_status_register_amic_a25l40p, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -1022,7 +1022,7 @@ }, .printlock = spi_prettyprint_status_register_amic_a25l40p, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -1054,7 +1054,7 @@ }, .printlock = spi_prettyprint_status_register_amic_a25l40p, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -1086,7 +1086,7 @@ }, .printlock = spi_prettyprint_status_register_amic_a25l40p, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -1118,7 +1118,7 @@ }, .printlock = spi_prettyprint_status_register_amic_a25l40p, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -1157,7 +1157,7 @@ }, .printlock = spi_prettyprint_status_register_amic_a25l032, .unlock = NULL, /* Two status reg bytes (read with 0x35 and 0x05) */ - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -1196,7 +1196,7 @@ }, .printlock = spi_prettyprint_status_register_amic_a25lq032, .unlock = NULL, /* Two status reg bytes (read with 0x35 and 0x05) */ - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -1228,7 +1228,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -1260,7 +1260,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -1287,7 +1287,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -1315,7 +1315,7 @@ } }, .unlock = unlock_49fl00x, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -1354,7 +1354,7 @@ }, .printlock = spi_prettyprint_status_register_at25df, .unlock = spi_disable_blockprotect_at25df, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, /* 2.3-3.6V & 2.7-3.6V models available */ }, @@ -1392,7 +1392,7 @@ }, .printlock = spi_prettyprint_status_register_at25df, .unlock = spi_disable_blockprotect_at25df, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, /* 2.3-3.6V & 2.7-3.6V models available */ }, @@ -1430,7 +1430,7 @@ }, .printlock = spi_prettyprint_status_register_at25df, .unlock = spi_disable_blockprotect_at25df, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {1600, 2000}, /* Datasheet says range is 1.65-1.95 V */ }, @@ -1468,7 +1468,7 @@ }, .printlock = spi_prettyprint_status_register_at25df_sec, .unlock = spi_disable_blockprotect_at25df_sec, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -1506,7 +1506,7 @@ }, .printlock = spi_prettyprint_status_register_at25df_sec, .unlock = spi_disable_blockprotect_at25df_sec, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -1544,7 +1544,7 @@ }, .printlock = spi_prettyprint_status_register_at25df, .unlock = spi_disable_blockprotect_at25df, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -1583,7 +1583,7 @@ }, .printlock = spi_prettyprint_status_register_at25df_sec, .unlock = spi_disable_blockprotect_at25df_sec, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -1621,7 +1621,7 @@ }, .printlock = spi_prettyprint_status_register_at25df_sec, .unlock = spi_disable_blockprotect_at25df_sec, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -1660,7 +1660,7 @@ }, .printlock = spi_prettyprint_status_register_at25df_sec, .unlock = spi_disable_blockprotect_at25df_sec, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -1699,7 +1699,7 @@ }, .printlock = spi_prettyprint_status_register_at25f512b, .unlock = spi_disable_blockprotect_at25f512b, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -1740,7 +1740,7 @@ }, .printlock = spi_prettyprint_status_register_at25fs010, .unlock = spi_disable_blockprotect_at25fs010, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -1778,7 +1778,7 @@ }, .printlock = spi_prettyprint_status_register_at25fs040, .unlock = spi_disable_blockprotect_at25fs040, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -1802,7 +1802,7 @@ .block_erase = spi_block_erase_20, } }, - .write = NULL /* Incompatible Page write */, + .writer = {NULL, 0} /* Incompatible Page write */, .read = spi_chip_read, .voltage = {2700, 3600}, /* 3.0-3.6V for higher speed, 2.7-3.6V normal */ }, @@ -1840,7 +1840,7 @@ }, .printlock = spi_prettyprint_status_register_atmel_at26df081a, .unlock = spi_disable_blockprotect_at25df, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -1878,7 +1878,7 @@ }, .printlock = spi_prettyprint_status_register_at25df, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -1916,7 +1916,7 @@ }, .printlock = spi_prettyprint_status_register_atmel_at26df081a, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -1936,7 +1936,7 @@ .probe_timing = TIMING_ZERO, .printlock = spi_prettyprint_status_register_atmel_at26df081a, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, },*/ @@ -1971,7 +1971,7 @@ .block_erase = spi_block_erase_c7, } }, - .write = NULL /* Incompatible Page write */, + .writer = {NULL, 0} /* Incompatible Page write */, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -1995,7 +1995,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec, + .writer = {write_jedec, 128}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -2019,7 +2019,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec, /* FIXME */ + .writer = {write_jedec, 128}, /* FIXME */ .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -2043,7 +2043,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec, + .writer = {write_jedec, 256}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -2067,7 +2067,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec, + .writer = {write_jedec, 256}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -2084,7 +2084,7 @@ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .write = NULL /* Incompatible Page write */, + .writer = {NULL, 0} /* Incompatible Page write */, .read = NULL /* Incompatible read */, .voltage = {2700, 3600}, }, @@ -2101,7 +2101,7 @@ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .write = NULL, + .writer = {NULL, 0}, .read = NULL, .voltage = {2700, 3600}, }, @@ -2118,7 +2118,7 @@ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .write = NULL, + .writer = {NULL, 0}, .read = NULL, .voltage = {2700, 3600}, }, @@ -2135,7 +2135,7 @@ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .write = NULL, + .writer = {NULL, 0}, .read = NULL, .voltage = {2500, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */ }, @@ -2152,7 +2152,7 @@ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .write = NULL, + .writer = {NULL, 0}, .read = NULL, .voltage = {2700, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */ }, @@ -2169,7 +2169,7 @@ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .write = NULL, + .writer = {NULL, 0}, .read = NULL, .voltage = {2700, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */ }, @@ -2186,7 +2186,7 @@ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .write = NULL, + .writer = {NULL, 0}, .read = NULL /* Incompatible read */, .voltage = {2700, 3600}, }, @@ -2205,7 +2205,7 @@ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .write = NULL, + .writer = {NULL, 0}, .read = NULL, .voltage = {2700, 3600}, }, @@ -2222,7 +2222,7 @@ .tested = TEST_BAD_READ, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .write = NULL, + .writer = {NULL, 0}, .read = NULL, .voltage = {2700, 3600}, }, @@ -2246,7 +2246,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {2700, 3600}, }, @@ -2278,7 +2278,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -2310,7 +2310,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -2335,7 +2335,7 @@ } }, .printlock = printlock_at49f, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -2366,7 +2366,7 @@ */ }, .printlock = printlock_at49f, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -2397,7 +2397,7 @@ */ }, .printlock = printlock_at49f, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -2428,7 +2428,7 @@ */ }, .printlock = printlock_at49f, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -2460,7 +2460,7 @@ */ }, .printlock = printlock_at49f, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -2496,7 +2496,7 @@ }, .printlock = NULL, /* TODO */ .unlock = NULL, /* unlock_82802ab() not correct(?) */ - .write = write_82802ab, + .writer = {write_82802ab, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -2520,7 +2520,7 @@ .block_erase = NULL, /* TODO */ }, }, - .write = NULL, /* TODO */ + .writer = {NULL, 0}, /* TODO */ .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -2547,7 +2547,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -2579,7 +2579,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -2613,7 +2613,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, + .writer = {spi_chip_write, 1}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -2646,7 +2646,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -2679,7 +2679,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -2712,7 +2712,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -2745,7 +2745,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -2779,7 +2779,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -2813,7 +2813,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -2847,7 +2847,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -2881,7 +2881,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -2915,7 +2915,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -2949,7 +2949,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -2983,7 +2983,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -3017,7 +3017,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -3051,7 +3051,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -3085,7 +3085,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -3119,7 +3119,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -3153,7 +3153,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -3190,7 +3190,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -3227,7 +3227,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -3264,7 +3264,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -3298,7 +3298,7 @@ }, }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -3332,7 +3332,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -3366,7 +3366,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -3400,7 +3400,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -3435,7 +3435,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -3470,7 +3470,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -3511,7 +3511,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -3546,7 +3546,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -3581,7 +3581,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -3616,7 +3616,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, }, @@ -3651,7 +3651,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -3687,7 +3687,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -3715,7 +3715,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -3747,7 +3747,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -3779,7 +3779,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -3809,7 +3809,7 @@ .block_erase = block_erase_chip_en29lv640b, }, }, - .write = write_en29lv640b, + .writer = {write_en29lv640b, 2}, .read = read_memmapped, .voltage = {2700, 3600}, }, @@ -3841,7 +3841,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = NULL, + .writer = {NULL, 0}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -3873,7 +3873,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = NULL, + .writer = {NULL, 0}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -3906,7 +3906,7 @@ .block_erase = block_erase_chip_m29f400bt, }, }, - .write = write_m29f400bt, + .writer = {write_m29f400bt, 1}, .read = read_memmapped, .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ }, @@ -3938,7 +3938,7 @@ .block_erase = block_erase_chip_m29f400bt, }, }, - .write = write_m29f400bt, + .writer = {write_m29f400bt, 1}, .read = read_memmapped, .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ }, @@ -3975,7 +3975,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -4012,7 +4012,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -4050,7 +4050,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -4088,7 +4088,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -4126,7 +4126,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -4164,7 +4164,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, }, @@ -4201,7 +4201,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, }, @@ -4232,7 +4232,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4750, 5250}, /* 4.75-5.25V for type -45, others 4.5-5.5V */ }, @@ -4264,7 +4264,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4750, 5250}, /* 4.75-5.25V for type -45, others 4.5-5.5V */ }, @@ -4291,7 +4291,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -4318,7 +4318,7 @@ .block_erase = erase_block_82802ab, }, }, - .write = write_82802ab, + .writer = {write_82802ab, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -4345,7 +4345,7 @@ .block_erase = erase_block_82802ab, }, }, - .write = write_82802ab, + .writer = {write_82802ab, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -4373,7 +4373,7 @@ .block_erase = erase_block_82802ab, }, }, - .write = write_82802ab, + .writer = {write_82802ab, 1}, .read = read_memmapped, }, @@ -4396,7 +4396,7 @@ }, }, .unlock = unlock_28f004s5, - .write = write_82802ab, + .writer = {write_82802ab, 1}, .read = read_memmapped, }, @@ -4423,7 +4423,7 @@ .block_erase = erase_block_82802ab, }, }, - .write = write_82802ab, + .writer = {write_82802ab, 1}, .read = read_memmapped, }, @@ -4450,7 +4450,7 @@ .block_erase = erase_block_82802ab, }, }, - .write = write_82802ab, + .writer = {write_82802ab, 1}, .read = read_memmapped, }, @@ -4478,7 +4478,7 @@ .block_erase = erase_block_82802ab, }, }, - .write = write_82802ab, + .writer = {write_82802ab, 1}, .read = read_memmapped, }, @@ -4506,7 +4506,7 @@ .block_erase = erase_block_82802ab, }, }, - .write = write_82802ab, + .writer = {write_82802ab, 1}, .read = read_memmapped, }, @@ -4530,7 +4530,7 @@ }, }, .unlock = unlock_82802ab, - .write = write_82802ab, + .writer = {write_82802ab, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -4555,7 +4555,7 @@ }, }, .unlock = unlock_82802ab, - .write = write_82802ab, + .writer = {write_82802ab, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -4592,7 +4592,7 @@ }, }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -4626,7 +4626,7 @@ }, }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -4663,7 +4663,7 @@ }, }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -4700,7 +4700,7 @@ }, }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -4737,7 +4737,7 @@ }, }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -4774,7 +4774,7 @@ }, }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -4808,7 +4808,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -4842,7 +4842,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -4876,7 +4876,7 @@ }, }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -4910,7 +4910,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -4944,7 +4944,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -4978,7 +4978,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -5011,7 +5011,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -5044,7 +5044,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -5076,7 +5076,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -5108,7 +5108,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -5135,7 +5135,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -5162,7 +5162,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {2700, 3600}, }, @@ -5189,7 +5189,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -5216,7 +5216,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -5243,7 +5243,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -5270,7 +5270,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -5297,7 +5297,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -5324,7 +5324,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -5351,7 +5351,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -5382,7 +5382,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -5413,7 +5413,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -5444,7 +5444,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -5475,7 +5475,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -5506,7 +5506,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -5536,7 +5536,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, }, @@ -5566,7 +5566,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -5603,7 +5603,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -5634,7 +5634,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -5665,7 +5665,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -5702,7 +5702,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -5733,7 +5733,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -5765,7 +5765,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -5797,7 +5797,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -5827,7 +5827,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {2700, 3600}, }, @@ -5857,7 +5857,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {2700, 3600}, }, @@ -5887,7 +5887,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {2700, 3600}, }, @@ -5917,7 +5917,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {2700, 3600}, }, @@ -5948,7 +5948,7 @@ } }, .unlock = unlock_49fl00x, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -5979,7 +5979,7 @@ } }, .unlock = unlock_49fl00x, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -6006,7 +6006,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, }, @@ -6035,7 +6035,7 @@ } }, .unlock = unlock_lh28f008bjt, - .write = write_82802ab, + .writer = {write_82802ab, 1}, .read = read_memmapped, .voltage = {2700, 3600}, }, @@ -6068,7 +6068,7 @@ }, }, .unlock = unlock_82802ab, - .write = write_82802ab, + .writer = {write_82802ab, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -6096,7 +6096,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -6124,7 +6124,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -6152,7 +6152,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -6180,7 +6180,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -6208,7 +6208,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -6239,7 +6239,7 @@ }, }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ + .writer = {spi_chip_write, 1}, /* AAI supported, but opcode is 0xAF */ .read = spi_chip_read, .voltage = {3000, 3600}, }, @@ -6270,7 +6270,7 @@ }, }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ + .writer = {spi_chip_write, 1}, /* AAI supported, but opcode is 0xAF */ .read = spi_chip_read, .voltage = {3000, 3600}, }, @@ -6301,7 +6301,7 @@ }, }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, + .writer = {spi_chip_write, 1}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -6338,7 +6338,7 @@ }, }, .unlock = spi_disable_blockprotect, - .write = spi_aai_write, + .writer = {spi_aai_write, 2}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -6375,7 +6375,7 @@ }, }, .unlock = spi_disable_blockprotect, - .write = spi_aai_write, + .writer = {spi_aai_write, 2}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -6412,7 +6412,7 @@ }, }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -6443,7 +6443,7 @@ }, }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ + .writer = {spi_chip_write, 1}, /* AAI supported, but opcode is 0xAF */ .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -6480,7 +6480,7 @@ }, }, .unlock = spi_disable_blockprotect, - .write = spi_aai_write, + .writer = {spi_aai_write, 2}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -6517,7 +6517,7 @@ }, }, .unlock = spi_disable_blockprotect, - .write = spi_aai_write, + .writer = {spi_aai_write, 2}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -6554,7 +6554,7 @@ }, }, .unlock = spi_disable_blockprotect, - .write = spi_aai_write, + .writer = {spi_aai_write, 2}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -6582,7 +6582,7 @@ } }, .unlock = unprotect_28sf040, - .write = write_28sf040, + .writer = {write_28sf040, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -6606,7 +6606,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec, + .writer = {write_jedec, 128}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -6630,7 +6630,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec, + .writer = {write_jedec, 128}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -6654,7 +6654,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec, + .writer = {write_jedec, 128}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -6678,7 +6678,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec, + .writer = {write_jedec, 128}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -6705,7 +6705,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -6732,7 +6732,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -6759,7 +6759,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -6786,7 +6786,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -6813,7 +6813,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {2700, 3600}, }, @@ -6840,7 +6840,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {2700, 3600}, }, @@ -6867,7 +6867,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {2700, 3600}, }, @@ -6894,7 +6894,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {2700, 3600}, }, @@ -6924,7 +6924,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {2700, 3600}, }, @@ -6956,7 +6956,7 @@ }, .printlock = printlock_sst_fwhub, .unlock = unlock_sst_fwhub, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -6988,7 +6988,7 @@ }, .printlock = printlock_sst_fwhub, .unlock = unlock_sst_fwhub, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -7023,7 +7023,7 @@ }, .printlock = printlock_sst_fwhub, .unlock = unlock_sst_fwhub, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -7056,7 +7056,7 @@ } }, .unlock = unlock_49lfxxxc, - .write = write_82802ab, + .writer = {write_82802ab, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -7088,7 +7088,7 @@ }, .printlock = printlock_sst_fwhub, .unlock = unlock_sst_fwhub, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -7121,7 +7121,7 @@ } }, .unlock = unlock_49lfxxxc, - .write = write_82802ab, + .writer = {write_82802ab, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -7154,7 +7154,7 @@ } }, .unlock = unlock_49lfxxxc, - .write = write_82802ab, + .writer = {write_82802ab, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -7184,7 +7184,7 @@ .block_erase = NULL, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -7214,7 +7214,7 @@ .block_erase = NULL, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -7244,7 +7244,7 @@ .block_erase = NULL, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -7275,7 +7275,7 @@ } }, .unlock = unlock_82802ab, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -7305,7 +7305,7 @@ .block_erase = NULL, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -7338,7 +7338,7 @@ } }, .unlock = unlock_49lfxxxc, - .write = write_82802ab, + .writer = {write_82802ab, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -7366,7 +7366,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -7399,7 +7399,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* 128 */ + .writer = {spi_chip_write, 128}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -7427,7 +7427,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -7456,7 +7456,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* 128 */ + .writer = {spi_chip_write, 128}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -7484,7 +7484,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -7512,7 +7512,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -7540,7 +7540,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, }, @@ -7567,7 +7567,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -7595,7 +7595,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -7623,7 +7623,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -7651,7 +7651,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -7679,7 +7679,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -7711,7 +7711,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, }, @@ -7741,7 +7741,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -7772,7 +7772,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, }, @@ -7803,7 +7803,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4750, 5250}, /* 4.75-5.25V for type -X, others 4.5-5.5V */ }, @@ -7835,7 +7835,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4750, 5250}, /* 4.75-5.25V for type -X, others 4.5-5.5V */ }, @@ -7862,7 +7862,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -7895,7 +7895,7 @@ .block_erase = block_erase_chip_m29f400bt, } }, - .write = write_m29f400bt, + .writer = {write_m29f400bt, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -7927,7 +7927,7 @@ .block_erase = block_erase_chip_m29f400bt, } }, - .write = write_m29f400bt, + .writer = {write_m29f400bt, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -7954,7 +7954,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {2700, 3600}, }, @@ -7981,7 +7981,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {2700, 3600}, }, @@ -8005,7 +8005,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {2700, 3600}, }, @@ -8038,7 +8038,7 @@ } }, .unlock = unlock_stm50flw0x0x, - .write = write_82802ab, + .writer = {write_82802ab, 1}, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ }, @@ -8071,7 +8071,7 @@ } }, .unlock = unlock_stm50flw0x0x, - .write = write_82802ab, + .writer = {write_82802ab, 1}, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ }, @@ -8104,7 +8104,7 @@ } }, .unlock = unlock_stm50flw0x0x, - .write = write_82802ab, + .writer = {write_82802ab, 1}, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ }, @@ -8137,7 +8137,7 @@ } }, .unlock = unlock_stm50flw0x0x, - .write = write_82802ab, + .writer = {write_82802ab, 1}, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ }, @@ -8167,7 +8167,7 @@ } }, .unlock = unlock_stm50flw0x0x, - .write = write_82802ab, + .writer = {write_82802ab, 1}, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ }, @@ -8192,7 +8192,7 @@ } }, .unlock = unlock_stm50flw0x0x, - .write = write_82802ab, + .writer = {write_82802ab, 1}, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ }, @@ -8217,7 +8217,7 @@ } }, .unlock = unlock_stm50flw0x0x, - .write = write_82802ab, + .writer = {write_82802ab, 1}, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ }, @@ -8242,7 +8242,7 @@ } }, .unlock = unlock_stm50flw0x0x, - .write = write_82802ab, + .writer = {write_82802ab, 1}, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ }, @@ -8273,7 +8273,7 @@ } }, .unlock = unlock_stm50flw0x0x, - .write = write_82802ab, + .writer = {write_82802ab, 1}, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ }, @@ -8300,7 +8300,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -8327,7 +8327,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -8354,7 +8354,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, }, @@ -8380,7 +8380,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, }, @@ -8406,7 +8406,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -8433,7 +8433,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -8460,7 +8460,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -8487,7 +8487,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -8519,7 +8519,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -8551,7 +8551,7 @@ .block_erase = erase_chip_block_jedec, }, }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -8589,7 +8589,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -8627,7 +8627,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -8665,7 +8665,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -8703,7 +8703,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, }, @@ -8740,7 +8740,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, }, @@ -8770,7 +8770,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -8801,7 +8801,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -8832,7 +8832,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -8863,7 +8863,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -8900,7 +8900,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -8937,7 +8937,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -8974,7 +8974,7 @@ } }, .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, + .writer = {spi_chip_write, 256}, .read = spi_chip_read, .voltage = {2700, 3600}, }, @@ -8998,7 +8998,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec, + .writer = {write_jedec, 128}, .read = read_memmapped, }, @@ -9021,7 +9021,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec, + .writer = {write_jedec, 128}, .read = read_memmapped, }, @@ -9044,7 +9044,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec, + .writer = {write_jedec, 128}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -9068,7 +9068,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec, + .writer = {write_jedec, 128}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -9099,7 +9099,7 @@ } }, .printlock = printlock_w39l040, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -9127,7 +9127,7 @@ } }, .printlock = printlock_w39v040a, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -9155,7 +9155,7 @@ } }, .printlock = printlock_w39v040b, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -9183,7 +9183,7 @@ } }, .printlock = printlock_w39v040c, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -9215,7 +9215,7 @@ }, .printlock = printlock_w39v040fa, .unlock = unlock_sst_fwhub, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -9244,7 +9244,7 @@ }, .printlock = printlock_w39v040fb, .unlock = unlock_w39v040fb, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program */ }, @@ -9272,7 +9272,7 @@ } }, .printlock = printlock_w39v040fc, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program */ }, @@ -9300,7 +9300,7 @@ } }, .printlock = printlock_w39v080a, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -9332,7 +9332,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -9356,7 +9356,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {4500, 5500}, }, @@ -9388,7 +9388,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -9420,7 +9420,7 @@ .block_erase = erase_chip_block_jedec, } }, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, }, @@ -9449,7 +9449,7 @@ }, .printlock = printlock_w39v080fa, .unlock = unlock_w39v080fa, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program */ }, @@ -9477,7 +9477,7 @@ } }, .printlock = printlock_w39v080fa_dual, - .write = write_jedec_1, + .writer = {write_jedec, 1}, .read = read_memmapped, .voltage = {3000, 3600}, /* Also has 12V fast program */ }, @@ -9498,7 +9498,7 @@ /* FIXME: some vendor extensions define this */ .voltage = {0}, /* Everything below will be set by the probing function. */ - .write = NULL, + .writer = {NULL, 0}, .total_size = 0, .page_size = 0, .feature_bits = 0, @@ -9523,7 +9523,7 @@ .block_erase = erase_opaque, } }, - .write = write_opaque, + .writer = {write_opaque, 0}, .read = read_opaque, }, @@ -9538,7 +9538,7 @@ .tested = TEST_BAD_PREW, .probe = probe_spi_rdid4, .probe_timing = TIMING_ZERO, - .write = NULL, + .writer = {NULL, 0}, .read = NULL, }, @@ -9553,7 +9553,7 @@ .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .write = NULL, + .writer = {NULL, 0}, .read = NULL, }, @@ -9568,7 +9568,7 @@ .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .write = NULL, + .writer = {NULL, 0}, .read = NULL, }, @@ -9583,7 +9583,7 @@ .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .write = NULL, + .writer = {NULL, 0}, .read = NULL, }, @@ -9598,7 +9598,7 @@ .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .write = NULL, + .writer = {NULL, 0}, .read = NULL, }, @@ -9613,7 +9613,7 @@ .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .write = NULL, + .writer = {NULL, 0}, .read = NULL, }, @@ -9628,7 +9628,7 @@ .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .write = NULL, + .writer = {NULL, 0}, .read = NULL, }, @@ -9643,7 +9643,7 @@ .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .write = NULL, + .writer = {NULL, 0}, .read = NULL, }, @@ -9657,7 +9657,7 @@ .page_size = 256, .tested = TEST_BAD_PREW, .probe = probe_spi_rdid, - .write = NULL, + .writer = {NULL, 0}, }, { @@ -9670,7 +9670,7 @@ .page_size = 256, .tested = TEST_BAD_PREW, .probe = probe_spi_rems, - .write = NULL, + .writer = {NULL, 0}, }, { NULL } Index: flashrom-max_write_size/sfdp.c =================================================================== --- flashrom-max_write_size/sfdp.c (Revision 1587) +++ flashrom-max_write_size/sfdp.c (Arbeitskopie) @@ -187,11 +187,13 @@ if (tmp32 & (1 << 2)) { msg_cdbg2("at least 64 B.\n"); chip->page_size = 64; - chip->write = spi_chip_write_256; + chip->writer.write = spi_chip_write; + chip->writer.max_write_size = 64; } else { msg_cdbg2("1 B only.\n"); chip->page_size = 256; - chip->write = spi_chip_write_1; + chip->writer.write = spi_chip_write; + chip->writer.max_write_size = 1; } if ((tmp32 & 0x3) == 0x1) { Index: flashrom-max_write_size/flashrom.c =================================================================== --- flashrom-max_write_size/flashrom.c (Revision 1587) +++ flashrom-max_write_size/flashrom.c (Arbeitskopie) @@ -1276,8 +1276,7 @@ if (!writecount++) msg_cdbg("W"); /* Needs the partial write function signature. */ - ret = flash->chip->write(flash, newcontents + starthere, - start + starthere, lenhere); + ret = flash->chip->writer.write(flash, newcontents + starthere, start + starthere, lenhere); if (ret) return ret; starthere += lenhere; @@ -1737,9 +1736,8 @@ return 1; msg_cerr("Continuing anyway.\n"); } - if (!chip->write) { - msg_cerr("flashrom has no write function for this " - "flash chip.\n"); + if (!flash->chip->writer.write) { + msg_cerr("flashrom has no write function for this flash chip.\n"); return 1; } } Index: flashrom-max_write_size/chipdrivers.h =================================================================== --- flashrom-max_write_size/chipdrivers.h (Revision 1587) +++ flashrom-max_write_size/chipdrivers.h (Arbeitskopie) @@ -42,8 +42,7 @@ int spi_block_erase_60(struct flashctx *flash, unsigned int addr, unsigned int blocklen); int spi_block_erase_c7(struct flashctx *flash, unsigned int addr, unsigned int blocklen); erasefunc_t *spi_get_erasefn_from_opcode(uint8_t opcode); -int spi_chip_write_1(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); -int spi_chip_write_256(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); +int spi_chip_write(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); int spi_chip_read(struct flashctx *flash, uint8_t *buf, unsigned int start, int unsigned len); uint8_t spi_read_status_register(struct flashctx *flash); int spi_write_status_register(struct flashctx *flash, int status); @@ -52,7 +51,6 @@ void spi_prettyprint_status_register_welwip(uint8_t status); int spi_prettyprint_status_register(struct flashctx *flash); int spi_disable_blockprotect(struct flashctx *flash); -int spi_byte_program(struct flashctx *flash, unsigned int addr, uint8_t databyte); int spi_nbyte_program(struct flashctx *flash, unsigned int addr, uint8_t *bytes, unsigned int len); int spi_nbyte_read(struct flashctx *flash, unsigned int addr, uint8_t *bytes, unsigned int len); int spi_read_chunked(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len, unsigned int chunksize); -- http://www.hailfinger.org/

2 1

#8: transaction error and opcode 0x03 failed at address 0x020000
by flashrom 29 Aug '12

29 Aug '12

#8: transaction error and opcode 0x03 failed at address 0x020000 ----------------------------------+------------------------------- Reporter: john | Owner: hailfinger Type: defect | Status: new Priority: major | Milestone: flashrom 0.9.2 Component: flashrom | Version: pre-0.9.0 Keywords: flashrom9.6 | Dependencies: Patch Status: there is no patch | ----------------------------------+------------------------------- Hi, I am getting error while testing on reading and erasing the BIOS image, Please find attached the relavant logs. I am trying to flash on winbond W25Q64. Thanks & Regards, john -- Ticket URL: <http://www.flashrom.org/trac/flashrom/ticket/8> flashrom <http://www.flashrom.org/>

1 0

Re: [flashrom] [PATCH] Remove potential endless loops from satasii.c.
by Carl-Daniel Hailfinger 29 Aug '12

29 Aug '12

Am 25.08.2012 04:09 schrieb Stefan Tauner: > This is based on the idea from the "Make satasii driver more robust" patch > Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> > > It is missing the BAR access changes, but factors out the wait loop and > replaces all endless loops instead of just a few. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> The refactoring is a really good idea and I like it. Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> (The fixup patch for BAR5 is a separate issue and I have to reinvestiage what I tried to debug/fix back then.) > i am not sure if we really want to ignore the hung status register. > Normally, i would have really aborted on timeouts, but since this was not > part of the original patch i kept the ignoring behavior. I don't think we can abort on timeouts. satasii_chip_writeb() returns void. We would have to change all chip_write[bwl]() and all chip_read[bwl]() functions to allow for error handling. Not sure if that is worth it. Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

[commit] r1588 - trunk
by repository service 29 Aug '12

29 Aug '12

Author: stefanct Date: Wed Aug 29 05:41:57 2012 New Revision: 1588 URL: http://flashrom.org/trac/flashrom/changeset/1588 Log: Remove potential endless loops from satasii.c. This is based on the idea from the "Make satasii driver more robust" patch Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> It factors out the wait loop and replaces all potential endless loops instead of just a few. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/satasii.c Modified: trunk/satasii.c ============================================================================== --- trunk/satasii.c Mon Aug 27 17:12:36 2012 (r1587) +++ trunk/satasii.c Wed Aug 29 05:41:57 2012 (r1588) @@ -61,6 +61,20 @@ return 0; } +static uint32_t satasii_wait_done(void) +{ + uint32_t ctrl_reg; + int i = 0; + while ((ctrl_reg = pci_mmio_readl(sii_bar)) & (1 << 25)) { + if (++i > 10000) { + msg_perr("%s: control register stuck at %08x, ignoring.\n", + __func__, pci_mmio_readl(sii_bar)); + break; + } + } + return ctrl_reg; +} + int satasii_init(void) { uint32_t addr; @@ -97,9 +111,8 @@ static void satasii_chip_writeb(const struct flashctx *flash, uint8_t val, chipaddr addr) { - uint32_t ctrl_reg, data_reg; - - while ((ctrl_reg = pci_mmio_readl(sii_bar)) & (1 << 25)) ; + uint32_t data_reg; + uint32_t ctrl_reg = satasii_wait_done(); /* Mask out unused/reserved bits, set writes and start transaction. */ ctrl_reg &= 0xfcf80000; @@ -109,14 +122,12 @@ pci_mmio_writel(data_reg, (sii_bar + 4)); pci_mmio_writel(ctrl_reg, sii_bar); - while (pci_mmio_readl(sii_bar) & (1 << 25)) ; + satasii_wait_done(); } static uint8_t satasii_chip_readb(const struct flashctx *flash, const chipaddr addr) { - uint32_t ctrl_reg; - - while ((ctrl_reg = pci_mmio_readl(sii_bar)) & (1 << 25)) ; + uint32_t ctrl_reg = satasii_wait_done(); /* Mask out unused/reserved bits, set reads and start transaction. */ ctrl_reg &= 0xfcf80000; @@ -124,7 +135,7 @@ pci_mmio_writel(ctrl_reg, sii_bar); - while (pci_mmio_readl(sii_bar) & (1 << 25)) ; + satasii_wait_done(); return (pci_mmio_readl(sii_bar + 4)) & 0xff; }

1 0

CHIPSET: M68M-S2P
by Gustavo Ribeiro Croscato 29 Aug '12

29 Aug '12

Motherboard Product Page http://www.gigabyte.com/products/product-page.aspx?pid=3270#ov

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom