flashrom

flashrom@flashrom.org

8 participants
9164 discussions

[commit] r1689 - trunk
by repository service 28 Jun '13

28 Jun '13

Author: stefanct Date: Fri Jun 28 23:29:21 2013 New Revision: 1689 URL: http://flashrom.org/trac/flashrom/changeset/1689 Log: Add support for AMIC A25LQ16 and A25LQ64. Also, refine unlocking of A25L032, A25LQ32A and A25LQ032. Signed-off-by: Nikolay Nikolaev <evrinoma(a)gmail.com> Reviewed-by: Steven Zakulec <spzakulec(a)gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/flashchips.c trunk/flashchips.h Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Fri Jun 28 23:29:14 2013 (r1688) +++ trunk/flashchips.c Fri Jun 28 23:29:21 2013 (r1689) @@ -1155,8 +1155,8 @@ .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_amic_a25l032, - .unlock = NULL, /* Two status reg bytes (read with 0x35 and 0x05) */ + .printlock = spi_prettyprint_status_register_amic_a25l032, /* bit5: T/B, bit6: prot size */ + .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, @@ -1164,12 +1164,52 @@ { .vendor = "AMIC", - .name = "A25LQ032", + .name = "A25LQ16", + .bustype = BUS_SPI, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A25LQ16, + .total_size = 2048, + .page_size = 256, + /* supports SFDP */ + /* OTP: 64B total; read 0x4B, 0x48; write 0x42 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { { 4 * 1024, 512 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 64 * 1024, 32 } }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { { 64 * 1024, 32 } }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 2048 * 1024, 1 } }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 2048 * 1024, 1 } }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_amic_a25l032, /* bit5: T/B, bit6: prot size */ + .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: 2nd status reg (read with 0x35) */ + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "AMIC", + .name = "A25LQ032/A25LQ32A", .bustype = BUS_SPI, .manufacture_id = AMIC_ID_NOPREFIX, .model_id = AMIC_A25LQ032, .total_size = 4096, .page_size = 256, + /* A25LQ32A supports SFDP */ /* OTP: 64B total; read 0x4B, 0x48; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_UNTESTED, @@ -1194,8 +1234,49 @@ .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_amic_a25l032, - .unlock = NULL, /* Two status reg bytes (read with 0x35 and 0x05) */ + .printlock = spi_prettyprint_status_register_amic_a25l032, /* bit5: T/B, bit6: prot size */ + .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: 2nd status reg (read with 0x35) */ + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "AMIC", + .name = "A25LQ64", + .bustype = BUS_SPI, + .manufacture_id = AMIC_ID_NOPREFIX, + .model_id = AMIC_A25LQ032, + .total_size = 8192, + .page_size = 256, + /* supports SFDP */ + /* OTP: 512B total; enter 0xB1, exit 0xC1 */ + /* QPI enable 0x35, disable 0xF5 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { { 4 * 1024, 2048 } }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { { 32 * 1024, 256 } }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { { 64 * 1024, 128 } }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 8192 * 1024, 1 } }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 8192 * 1024, 1 } }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp3, /* bit6 is quad enhance (sic!) */ + .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Fri Jun 28 23:29:14 2013 (r1688) +++ trunk/flashchips.h Fri Jun 28 23:29:21 2013 (r1689) @@ -112,7 +112,9 @@ #define AMIC_A25L080 0x3014 #define AMIC_A25L016 0x3015 #define AMIC_A25L032 0x3016 -#define AMIC_A25LQ032 0x4016 +#define AMIC_A25LQ16 0x4015 +#define AMIC_A25LQ032 0x4016 /* Same as A25LQ32A, but the latter supports SFDP */ +#define AMIC_A25LQ64 0x4017 #define AMIC_A29002B 0x0d #define AMIC_A29002T 0x8C /* Same as A290021T */ #define AMIC_A29040B 0x86

1 0

[commit] r1688 - trunk
by repository service 28 Jun '13

28 Jun '13

Author: stefanct Date: Fri Jun 28 23:29:14 2013 New Revision: 1688 URL: http://flashrom.org/trac/flashrom/changeset/1688 Log: Add support for more Eon EN25QH chips. Add... - EN25QH64 - EN25QH128 - EN25QH256 (defunct due to addressing) Signed-off-by: Nikolay Nikolaev <evrinoma(a)gmail.com> Reviewed-by: Steven Zakulec <spzakulec(a)gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/flashchips.c trunk/flashchips.h Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Fri Jun 28 23:29:08 2013 (r1687) +++ trunk/flashchips.c Fri Jun 28 23:29:14 2013 (r1688) @@ -3856,7 +3856,8 @@ .page_size = 256, /* supports SFDP */ /* OTP: 512B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + /* QPI enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_OK_PR, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -3876,8 +3877,8 @@ .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, + .printlock = spi_prettyprint_status_register_default_bp3, /* bit6 is quad enable */ + .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, @@ -3893,7 +3894,8 @@ .page_size = 256, /* supports SFDP */ /* OTP: 512B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + /* QPI enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, @@ -3913,8 +3915,120 @@ .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, + .printlock = spi_prettyprint_status_register_default_bp3, /* bit6 is quad enable */ + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25QH64", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25QH64, + .total_size = 8192, + .page_size = 256, + /* supports SFDP */ + /* OTP: 512B total; enter 0x3A */ + /* QPI enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 8192 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 8192 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp3, /* bit6 is quad enable */ + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25QH128", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25QH128, + .total_size = 16384, + .page_size = 256, + /* supports SFDP */ + /* OTP: 512B total; enter 0x3A */ + /* QPI enable 0x38, disable 0xFF */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 4096} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 256} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 16384 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp3, /* bit6 is quad enable */ + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Eon", + .name = "EN25QH256", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25QH256, + .total_size = 32768, + .page_size = 256, + /* supports SFDP */ + /* OTP: 512B total; enter 0x3A */ + /* QPI enable 0x38, disable 0xFF */ + /* EN4B: 0xB7, EX4B: 0xE9 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_BAD_REW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 8192} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 512} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 32768 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 32768 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp3, /* bit6 is quad enable */ + .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Fri Jun 28 23:29:08 2013 (r1687) +++ trunk/flashchips.h Fri Jun 28 23:29:14 2013 (r1688) @@ -259,6 +259,9 @@ #define EON_EN25Q128 0x3018 #define EON_EN25QH16 0x7015 #define EON_EN25QH32 0x7016 +#define EON_EN25QH64 0x7017 +#define EON_EN25QH128 0x7018 +#define EON_EN25QH256 0x7019 #define EON_EN25S10 0x3811 #define EON_EN25S20 0x3812 #define EON_EN25S40 0x3813

1 0

[commit] r1687 - trunk
by repository service 28 Jun '13

28 Jun '13

Author: stefanct Date: Fri Jun 28 23:29:08 2013 New Revision: 1687 URL: http://flashrom.org/trac/flashrom/changeset/1687 Log: Add support for Eon EN25S series. Add... - EN25S10 - EN25S20 - EN25S40 - EN25S80 - EN25S16 - EN25S32 - EN25S64 Signed-off-by: Nikolay Nikolaev <evrinoma(a)gmail.com> Reviewed-by: Steven Zakulec <spzakulec(a)gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/chipdrivers.h trunk/flashchips.c trunk/flashchips.h trunk/spi25_statusreg.c Modified: trunk/chipdrivers.h ============================================================================== --- trunk/chipdrivers.h Fri Jun 28 23:29:03 2013 (r1686) +++ trunk/chipdrivers.h Fri Jun 28 23:29:08 2013 (r1687) @@ -90,6 +90,7 @@ int spi_disable_blockprotect_at25f512b(struct flashctx *flash); int spi_disable_blockprotect_at25fs010(struct flashctx *flash); int spi_disable_blockprotect_at25fs040(struct flashctx *flash); +int spi_prettyprint_status_register_en25s_wp(struct flashctx *flash); int spi_prettyprint_status_register_s33(struct flashctx *flash); int spi_disable_blockprotect_s33(struct flashctx *flash); int spi_prettyprint_status_register_sst25(struct flashctx *flash); Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Fri Jun 28 23:29:03 2013 (r1686) +++ trunk/flashchips.c Fri Jun 28 23:29:08 2013 (r1687) @@ -3922,6 +3922,257 @@ { .vendor = "Eon", + .name = "EN25S10", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25S10, + .total_size = 128, + .page_size = 256, + /* OTP: 256B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp2, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1650, 1950}, + }, + + { + .vendor = "Eon", + .name = "EN25S20", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25S20, + .total_size = 256, + .page_size = 256, + /* OTP: 256B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp2, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1650, 1950}, + }, + + { + .vendor = "Eon", + .name = "EN25S40", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25S40, + .total_size = 512, + .page_size = 256, + /* OTP: 256B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp2, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1650, 1950}, + }, + + { + .vendor = "Eon", + .name = "EN25S80", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25S80, + .total_size = 1024, + .page_size = 256, + /* OTP: 256B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp2, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1650, 1950}, + }, + + { + .vendor = "Eon", + .name = "EN25S16", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25S16, + .total_size = 2048, + .page_size = 256, + /* OTP: 512B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {32 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2048 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2048 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_en25s_wp, + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1650, 1950}, + }, + + { + .vendor = "Eon", + .name = "EN25S32", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25S32, + .total_size = 4096, + .page_size = 256, + /* OTP: 512B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 128} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4096 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4096 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_en25s_wp, + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1650, 1950}, + }, + + { + .vendor = "Eon", + .name = "EN25S64", + .bustype = BUS_SPI, + .manufacture_id = EON_ID_NOPREFIX, + .model_id = EON_EN25S64, + .total_size = 8192, + .page_size = 256, + /* OTP: 512B total; enter 0x3A */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {8192 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {8192 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_en25s_wp, + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1650, 1950}, + }, + + { + .vendor = "Eon", .name = "EN29F010", .bustype = BUS_PARALLEL, .manufacture_id = EON_ID, Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Fri Jun 28 23:29:03 2013 (r1686) +++ trunk/flashchips.h Fri Jun 28 23:29:08 2013 (r1687) @@ -259,6 +259,13 @@ #define EON_EN25Q128 0x3018 #define EON_EN25QH16 0x7015 #define EON_EN25QH32 0x7016 +#define EON_EN25S10 0x3811 +#define EON_EN25S20 0x3812 +#define EON_EN25S40 0x3813 +#define EON_EN25S80 0x3814 +#define EON_EN25S16 0x3815 +#define EON_EN25S32 0x3816 +#define EON_EN25S64 0x3817 #define EON_EN29F512 0x7F21 #define EON_EN29F010 0x20 #define EON_EN29F040A 0x7F04 Modified: trunk/spi25_statusreg.c ============================================================================== --- trunk/spi25_statusreg.c Fri Jun 28 23:29:03 2013 (r1686) +++ trunk/spi25_statusreg.c Fri Jun 28 23:29:08 2013 (r1687) @@ -591,6 +591,20 @@ return spi_disable_blockprotect_generic(flash, 0x7C, 1 << 7, 0, 0xFF); } +/* === Eon === */ + +int spi_prettyprint_status_register_en25s_wp(struct flashctx *flash) +{ + uint8_t status = spi_read_status_register(flash); + spi_prettyprint_status_register_hex(status); + + spi_prettyprint_status_register_srwd(status); + msg_cdbg("Chip status register: WP# disable (WPDIS) is %sabled\n", (status & (1 << 6)) ? "en " : "dis"); + spi_prettyprint_status_register_bp(status, 3); + spi_prettyprint_status_register_welwip(status); + return 0; +} + /* === Intel === */ /* TODO: Clear P_FAIL and E_FAIL with Clear SR Fail Flags Command (30h) here? */

1 0

[commit] r1686 - trunk
by repository service 28 Jun '13

28 Jun '13

Author: stefanct Date: Fri Jun 28 23:29:03 2013 New Revision: 1686 URL: http://flashrom.org/trac/flashrom/changeset/1686 Log: Add support for Numonyx M45PE series. Add... - M45PE10 - M45PE20 - M45PE40 - M45PE80 - M45PE16 Signed-off-by: Nikolay Nikolaev <evrinoma(a)gmail.com> Reviewed-by: Steven Zakulec <spzakulec(a)gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/flashchips.c trunk/flashchips.h Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Fri Jun 28 23:28:56 2013 (r1685) +++ trunk/flashchips.c Fri Jun 28 23:29:03 2013 (r1686) @@ -6699,6 +6699,141 @@ { .vendor = "Numonyx", + .name = "M45PE10", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M45PE10, + .total_size = 128, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {256, 512} }, + .block_erase = spi_block_erase_db, + }, { + .eraseblocks = { {64 * 1024, 2} }, + .block_erase = spi_block_erase_d8, + } + }, + .printlock = spi_prettyprint_status_register_default_welwip, + .unlock = NULL, /* #WP pin write-protects lower 64kB. */ + .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Numonyx", + .name = "M45PE20", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M45PE20, + .total_size = 256, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {256, 1024} }, + .block_erase = spi_block_erase_db, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + } + }, + .printlock = spi_prettyprint_status_register_default_welwip, + .unlock = NULL, /* #WP pin write-protects lower 64kB. */ + .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Numonyx", + .name = "M45PE40", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M45PE40, + .total_size = 512, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {256, 2048} }, + .block_erase = spi_block_erase_db, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + } + }, + .printlock = spi_prettyprint_status_register_default_welwip, + .unlock = NULL, /* #WP pin write-protects lower 64kB. */ + .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Numonyx", + .name = "M45PE80", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M45PE80, + .total_size = 1024, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {256, 4096} }, + .block_erase = spi_block_erase_db, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + } + }, + .printlock = spi_prettyprint_status_register_default_welwip, + .unlock = NULL, /* #WP pin write-protects lower 64kB. */ + .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Numonyx", + .name = "M45PE16", + .bustype = BUS_SPI, + .manufacture_id = ST_ID, + .model_id = ST_M45PE16, + .total_size = 2048, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {256, 8192} }, + .block_erase = spi_block_erase_db, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + } + }, + .printlock = spi_prettyprint_status_register_default_welwip, + .unlock = NULL, /* #WP pin write-protects lower 64kB. */ + .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Numonyx", .name = "N25Q016", .bustype = BUS_SPI, .manufacture_id = ST_ID, Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Fri Jun 28 23:28:56 2013 (r1685) +++ trunk/flashchips.h Fri Jun 28 23:29:03 2013 (r1686) @@ -610,6 +610,11 @@ #define ST_M25P32 0x2016 #define ST_M25P64 0x2017 #define ST_M25P128 0x2018 +#define ST_M45PE10 0x4011 +#define ST_M45PE20 0x4012 +#define ST_M45PE40 0x4013 +#define ST_M45PE80 0x4014 +#define ST_M45PE16 0x4015 #define ST_M25PX16 0x7115 #define ST_M25PX32 0x7116 #define ST_M25PX64 0x7117

1 0

[commit] r1685 - trunk
by repository service 28 Jun '13

28 Jun '13

Author: stefanct Date: Fri Jun 28 23:28:56 2013 New Revision: 1685 URL: http://flashrom.org/trac/flashrom/changeset/1685 Log: Add support for some GigaDevice GD25* chips. Add... - GigaDevice GD25T80 - GigaDevice GD25Q10 - GigaDevice GD25Q512 Also, improve some others. Signed-off-by: Nikolay Nikolaev <evrinoma(a)gmail.com> Reviewed-by: Steven Zakulec <spzakulec(a)gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/flashchips.c trunk/flashchips.h Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Fri Jun 28 23:28:49 2013 (r1684) +++ trunk/flashchips.c Fri Jun 28 23:28:56 2013 (r1685) @@ -4173,7 +4173,117 @@ { .vendor = "GigaDevice", - .name = "GD25Q20", + .name = "GD25LQ32", + .bustype = BUS_SPI, + .manufacture_id = GIGADEVICE_ID, + .model_id = GIGADEVICE_GD25LQ32, + .total_size = 4096, + .page_size = 256, + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 128} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp4, + .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {1700, 1950}, + }, + + { + .vendor = "GigaDevice", + .name = "GD25Q512", + .bustype = BUS_SPI, + .manufacture_id = GIGADEVICE_ID, + .model_id = GIGADEVICE_GD25Q512, + .total_size = 64, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 16} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 2} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp4, + .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "GigaDevice", + .name = "GD25Q10", + .bustype = BUS_SPI, + .manufacture_id = GIGADEVICE_ID, + .model_id = GIGADEVICE_GD25Q10, + .total_size = 128, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 2} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp4, + .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "GigaDevice", + .name = "GD25Q20(B)", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25Q20, @@ -4202,16 +4312,16 @@ .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, + .printlock = spi_prettyprint_status_register_default_bp4, + .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "GigaDevice", - .name = "GD25Q40", + .name = "GD25Q40(B)", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25Q40, @@ -4240,10 +4350,10 @@ .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, + .printlock = spi_prettyprint_status_register_default_bp4, + .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, @@ -4279,16 +4389,16 @@ .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, + .printlock = spi_prettyprint_status_register_default_bp4, + .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "GigaDevice", - .name = "GD25Q16", + .name = "GD25Q16(B)", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, .model_id = GIGADEVICE_GD25Q16, @@ -4318,10 +4428,10 @@ .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, + .printlock = spi_prettyprint_status_register_default_bp4, + .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, @@ -4357,10 +4467,10 @@ .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, + .printlock = spi_prettyprint_status_register_default_bp4, + .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, @@ -4396,10 +4506,10 @@ .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, + .printlock = spi_prettyprint_status_register_default_bp4, + .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, @@ -4435,53 +4545,51 @@ .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, + .printlock = spi_prettyprint_status_register_default_bp4, + .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ .voltage = {2700, 3600}, }, { .vendor = "GigaDevice", - .name = "GD25LQ32", + .name = "GD25T80", .bustype = BUS_SPI, .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25LQ32, - .total_size = 4096, + .model_id = GIGADEVICE_GD25T80, + .total_size = 1024, .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ + /* OTP: 256B total; enter 0x3A */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, + .tested = TEST_UNTESTED, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, - .block_erasers = - { + .block_erasers = { { - .eraseblocks = { {4 * 1024, 1024} }, + .eraseblocks = { {4 * 1024, 256} }, .block_erase = spi_block_erase_20, }, { - .eraseblocks = { {32 * 1024, 128} }, + .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_52, }, { - .eraseblocks = { {64 * 1024, 64} }, + .eraseblocks = { {64 * 1024, 16} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, + .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_60, }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, + .eraseblocks = { {1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_default_bp4, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ + .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, - .voltage = {1700, 1950}, + .voltage = {2700, 3600}, }, - + { .vendor = "Hyundai", .name = "HY29F002T", Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Fri Jun 28 23:28:49 2013 (r1684) +++ trunk/flashchips.h Fri Jun 28 23:28:56 2013 (r1685) @@ -309,14 +309,22 @@ #define FUJITSU_MBM29LV800TA 0xDA /* Same as MBM29LV800TE */ #define GIGADEVICE_ID 0xC8 /* GigaDevice */ -#define GIGADEVICE_GD25Q20 0x4012 -#define GIGADEVICE_GD25Q40 0x4013 +#define GIGADEVICE_GD25T80 0x3114 +#define GIGADEVICE_GD25Q512 0x4010 +#define GIGADEVICE_GD25Q10 0x4011 +#define GIGADEVICE_GD25Q20 0x4012 /* Same as GD25QB */ +#define GIGADEVICE_GD25Q40 0x4013 /* Same as GD25QB */ #define GIGADEVICE_GD25Q80 0x4014 /* Same as GD25Q80B (which has OTP) */ #define GIGADEVICE_GD25Q16 0x4015 /* Same as GD25Q16B (which has OTP) */ #define GIGADEVICE_GD25Q32 0x4016 /* Same as GD25Q32B */ #define GIGADEVICE_GD25Q64 0x4017 /* Same as GD25Q64B */ #define GIGADEVICE_GD25Q128 0x4018 /* GD25Q128B only? */ +#define GIGADEVICE_GD25LQ40 0x6013 +#define GIGADEVICE_GD25LQ80 0x6014 +#define GIGADEVICE_GD25LQ16 0x6015 #define GIGADEVICE_GD25LQ32 0x6016 +#define GIGADEVICE_GD25LQ64 0x6017 /* Same as GD25LQ64B (which is faster) */ +#define GIGADEVICE_GD25LQ128 0x6018 #define HYUNDAI_ID 0xAD /* Hyundai */ #define HYUNDAI_HY29F400T 0x23 /* Same as HY29F400AT */

1 0

[commit] r1684 - trunk
by repository service 28 Jun '13

28 Jun '13

Author: stefanct Date: Fri Jun 28 23:28:49 2013 New Revision: 1684 URL: http://flashrom.org/trac/flashrom/changeset/1684 Log: Add support for all Sanyo LE25FW chips. Add... - Sanyo LE25FW403A - Sanyo LE25FW418A - Sanyo LE25FW806 - Sanyo LE25FW808 Also, fix wrong description of Sanyo LE25FW203A. Signed-off-by: Nikolay Nikolaev <evrinoma(a)gmail.com> Reviewed-by: Steven Zakulec <spzakulec(a)gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/flashchips.c trunk/flashchips.h Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Fri Jun 28 23:28:43 2013 (r1683) +++ trunk/flashchips.c Fri Jun 28 23:28:49 2013 (r1684) @@ -7431,11 +7431,11 @@ { .vendor = "Sanyo", - .name = "LF25FW203A", + .name = "LE25FW203A", .bustype = BUS_SPI, .manufacture_id = SANYO_ID, .model_id = SANYO_LE25FW203A, - .total_size = 2048, + .total_size = 256, .page_size = 256, .tested = TEST_UNTESTED, .probe = probe_spi_rdid, @@ -7443,17 +7443,147 @@ .block_erasers = { { - .eraseblocks = { {64 * 1024, 32} }, + .eraseblocks = { {256, 1024} }, + .block_erase = spi_block_erase_db, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_welwip, + .unlock = NULL, /* #WP pin write-protects lower 64kB. */ + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Sanyo", + .name = "LE25FW403A", + .bustype = BUS_SPI, + .manufacture_id = SANYO_ID, + .model_id = SANYO_LE25FW403A, + .total_size = 512, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {256, 2 * 1024} }, + .block_erase = spi_block_erase_db, + }, { + .eraseblocks = { {64 * 1024, 8} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, + .eraseblocks = { {512 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, + .printlock = spi_prettyprint_status_register_default_welwip, + .unlock = NULL, /* #WP pin write-protects lower 64kB. */ .write = spi_chip_write_256, .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Sanyo", + .name = "LE25FW418A", + .bustype = BUS_SPI, + .manufacture_id = SANYO_ID, + .model_id = SANYO_LE25FW418A, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_res2, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp2, + .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* some quad-read supported ("HD_READ mode") */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Sanyo", + .name = "LE25FW806", + .bustype = BUS_SPI, + .manufacture_id = SANYO_ID, + .model_id = SANYO_LE25FW806, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_res2, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp2, + .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + + { + .vendor = "Sanyo", + .name = "LE25FW808", + .bustype = BUS_SPI, + .manufacture_id = SANYO_ID, + .model_id = SANYO_LE25FW808, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_res2, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {8 * 1024, 128} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp2, + .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* some quad-read supported ("HD_READ mode") */ + .voltage = {2700, 3600}, }, { Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Fri Jun 28 23:28:43 2013 (r1683) +++ trunk/flashchips.h Fri Jun 28 23:28:49 2013 (r1684) @@ -494,6 +494,11 @@ */ #define SANYO_ID 0x62 #define SANYO_LE25FW203A 0x1600 +#define SANYO_LE25FW403A 0x1100 +#define SANYO_LE25FW406 0x07 /* RES2 */ +#define SANYO_LE25FW418A 0x10 /* RES2 and some weird 1 byte RDID variant */ +#define SANYO_LE25FW806 0x26 /* RES2 and some weird 1 byte RDID variant */ +#define SANYO_LE25FW808 0x20 /* RES2 and some weird 1 byte RDID variant */ #define SHARP_ID 0xB0 /* Sharp */ #define SHARP_LH28F008BJ__PT 0xEC

1 0

[commit] r1683 - trunk
by repository service 28 Jun '13

28 Jun '13

Author: stefanct Date: Fri Jun 28 23:28:43 2013 New Revision: 1683 URL: http://flashrom.org/trac/flashrom/changeset/1683 Log: Add support for Nantronics N25 series. Add... - N25S10 - N25S20 - N25S40 - N25S80 - N25S16 Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/flashchips.c trunk/flashchips.h trunk/spi25_statusreg.c Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Fri Jun 28 23:28:37 2013 (r1682) +++ trunk/flashchips.c Fri Jun 28 23:28:43 2013 (r1683) @@ -6234,6 +6234,202 @@ }, { + .vendor = "Nantronics", + .name = "N25S10", + .bustype = BUS_SPI, + .manufacture_id = NANTRONICS_ID_NOPREFIX, + .model_id = NANTRONICS_N25S10, + .total_size = 128, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 2} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp3, + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Nantronics", + .name = "N25S20", + .bustype = BUS_SPI, + .manufacture_id = NANTRONICS_ID_NOPREFIX, + .model_id = NANTRONICS_N25S20, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {32 * 1024, 8} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp3, + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Nantronics", + .name = "N25S40", + .bustype = BUS_SPI, + .manufacture_id = NANTRONICS_ID_NOPREFIX, + .model_id = NANTRONICS_N25S40, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {32 * 1024, 16} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp3, + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Nantronics", + .name = "N25S80", + .bustype = BUS_SPI, + .manufacture_id = NANTRONICS_ID_NOPREFIX, + .model_id = NANTRONICS_N25S80, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 32} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp3, + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Nantronics", + .name = "N25S16", + .bustype = BUS_SPI, + .manufacture_id = NANTRONICS_ID_NOPREFIX, + .model_id = NANTRONICS_N25S16, + .total_size = 2048, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 32} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2048 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2048 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp3, + .unlock = spi_disable_blockprotect_bp3_srwd, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ + .voltage = {2700, 3600}, + }, + + { .vendor = "Numonyx", .name = "M25PE10", .bustype = BUS_SPI, Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Fri Jun 28 23:28:37 2013 (r1682) +++ trunk/flashchips.h Fri Jun 28 23:28:43 2013 (r1683) @@ -449,6 +449,16 @@ #define MACRONIX_MX29SL800CB 0x6B /* Same as MX29SL802CB */ #define MACRONIX_MX29SL800CT 0xEA /* Same as MX29SL802CT */ +/* Nantronics Semiconductors is listed in JEP106AJ in bank 7, so it should have 6 continuation codes in front + * of the manufacturer ID of 0xD5. http://www.nantronicssemi.com */ +#define NANTRONICS_ID 0x7F7F7F7F7F7FD5 /* Nantronics */ +#define NANTRONICS_ID_NOPREFIX 0xD5 /* Nantronics, missing prefix */ +#define NANTRONICS_N25S10 0x3011 +#define NANTRONICS_N25S20 0x3012 +#define NANTRONICS_N25S40 0x3013 +#define NANTRONICS_N25S80 0x3014 +#define NANTRONICS_N25S16 0x3015 + /* * Programmable Micro Corp is listed in JEP106W in bank 2, so it should * have a 0x7F continuation code prefix. Modified: trunk/spi25_statusreg.c ============================================================================== --- trunk/spi25_statusreg.c Fri Jun 28 23:28:37 2013 (r1682) +++ trunk/spi25_statusreg.c Fri Jun 28 23:28:43 2013 (r1683) @@ -223,10 +223,10 @@ msg_cdbg("Chip status register is 0x%02x.\n", status); } -/* Common highest bit: Status Register Write Disable (SRWD). */ +/* Common highest bit: Status Register Write Disable (SRWD) or Status Register Protect (SRP). */ static void spi_prettyprint_status_register_srwd(uint8_t status) { - msg_cdbg("Chip status register: Status Register Write Disable (SRWD) is %sset\n", + msg_cdbg("Chip status register: Status Register Write Disable (SRWD, SRP, ...) is %sset\n", (status & (1 << 7)) ? "" : "not "); }

1 0

[commit] r1682 - trunk
by repository service 28 Jun '13

28 Jun '13

Author: stefanct Date: Fri Jun 28 23:28:37 2013 New Revision: 1682 URL: http://flashrom.org/trac/flashrom/changeset/1682 Log: Introduce spi_block_erase_db(). Used for page erase on some chips (e.g. Numonyx M45PE and Sanyo LF25FW series). Signed-off-by: Nikolay Nikolaev <evrinoma(a)gmail.com> Reviewed-by: Steven Zakulec <spzakulec(a)gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/chipdrivers.h trunk/spi.h trunk/spi25.c Modified: trunk/chipdrivers.h ============================================================================== --- trunk/chipdrivers.h Fri Jun 28 23:28:27 2013 (r1681) +++ trunk/chipdrivers.h Fri Jun 28 23:28:37 2013 (r1682) @@ -51,6 +51,7 @@ int spi_block_erase_c7(struct flashctx *flash, unsigned int addr, unsigned int blocklen); int spi_block_erase_d7(struct flashctx *flash, unsigned int addr, unsigned int blocklen); int spi_block_erase_d8(struct flashctx *flash, unsigned int addr, unsigned int blocklen); +int spi_block_erase_db(struct flashctx *flash, unsigned int addr, unsigned int blocklen); erasefunc_t *spi_get_erasefn_from_opcode(uint8_t opcode); int spi_chip_write_1(struct flashctx *flash, uint8_t *buf, unsigned int start, unsigned int len); int spi_byte_program(struct flashctx *flash, unsigned int addr, uint8_t databyte); Modified: trunk/spi.h ============================================================================== --- trunk/spi.h Fri Jun 28 23:28:27 2013 (r1681) +++ trunk/spi.h Fri Jun 28 23:28:37 2013 (r1682) @@ -106,6 +106,11 @@ #define JEDEC_SE_OUTSIZE 0x04 #define JEDEC_SE_INSIZE 0x00 +/* Page Erase 0xDB */ +#define JEDEC_PE 0xDB +#define JEDEC_PE_OUTSIZE 0x04 +#define JEDEC_PE_INSIZE 0x00 + /* Read Status Register */ #define JEDEC_RDSR 0x05 #define JEDEC_RDSR_OUTSIZE 0x01 Modified: trunk/spi25.c ============================================================================== --- trunk/spi25.c Fri Jun 28 23:28:27 2013 (r1681) +++ trunk/spi25.c Fri Jun 28 23:28:37 2013 (r1682) @@ -565,6 +565,47 @@ return 0; } +/* Page erase (usually 256B blocks) */ +int spi_block_erase_db(struct flashctx *flash, unsigned int addr, unsigned int blocklen) +{ + int result; + struct spi_command cmds[] = { + { + .writecnt = JEDEC_WREN_OUTSIZE, + .writearr = (const unsigned char[]){ JEDEC_WREN }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = JEDEC_PE_OUTSIZE, + .writearr = (const unsigned char[]){ + JEDEC_PE, + (addr >> 16) & 0xff, + (addr >> 8) & 0xff, + (addr & 0xff) + }, + .readcnt = 0, + .readarr = NULL, + }, { + .writecnt = 0, + .writearr = NULL, + .readcnt = 0, + .readarr = NULL, + } }; + + result = spi_send_multicommand(flash, cmds); + if (result) { + msg_cerr("%s failed during command execution at address 0x%x\n", __func__, addr); + return result; + } + + /* Wait until the Write-In-Progress bit is cleared. + * This takes up to 20 ms usually (on worn out devices up to the 0.5s range), so wait in 1 ms steps. */ + while (spi_read_status_register(flash) & SPI_SR_WIP) + programmer_delay(1 * 1000); + /* FIXME: Check the status register for errors. */ + return 0; +} + /* Sector size is usually 4k, though Macronix eliteflash has 64k */ int spi_block_erase_20(struct flashctx *flash, unsigned int addr, unsigned int blocklen) @@ -745,6 +786,8 @@ return &spi_block_erase_d7; case 0xd8: return &spi_block_erase_d8; + case 0xdb: + return &spi_block_erase_db; default: msg_cinfo("%s: unknown erase opcode (0x%02x). Please report " "this at flashrom(a)flashrom.org\n", __func__, opcode);

1 0

[commit] r1681 - trunk
by repository service 28 Jun '13

28 Jun '13

Author: stefanct Date: Fri Jun 28 23:28:27 2013 New Revision: 1681 URL: http://flashrom.org/trac/flashrom/changeset/1681 Log: Introduce additional SPI status register helpers. - spi_prettyprint_status_register_default_welwip(): It just prettyprints the plain hex value and the welwip bits. - spi_prettyprint_status_register_default_bp4(): Prints the hex value, welwip, bp0-5 and srwd bits. - spi_disable_blockprotect_bp2_srwd(), - spi_disable_blockprotect_bp3_srwd() and spi_disable_blockprotect_bp4_srwd(): Three new common block unprotection functions for the frequent cases where there is a status register lock bit at bit #7 and some block protection bits at bits #2-#4, #2-#5 and #2-#6 respectively. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/chipdrivers.h trunk/flashchips.c trunk/spi25_statusreg.c Modified: trunk/chipdrivers.h ============================================================================== --- trunk/chipdrivers.h Mon Jun 24 00:15:39 2013 (r1680) +++ trunk/chipdrivers.h Fri Jun 28 23:28:27 2013 (r1681) @@ -63,10 +63,15 @@ uint8_t spi_read_status_register(struct flashctx *flash); int spi_write_status_register(struct flashctx *flash, int status); int spi_prettyprint_status_register_plain(struct flashctx *flash); +int spi_prettyprint_status_register_default_welwip(struct flashctx *flash); int spi_prettyprint_status_register_default_bp1(struct flashctx *flash); int spi_prettyprint_status_register_default_bp2(struct flashctx *flash); int spi_prettyprint_status_register_default_bp3(struct flashctx *flash); +int spi_prettyprint_status_register_default_bp4(struct flashctx *flash); int spi_disable_blockprotect(struct flashctx *flash); +int spi_disable_blockprotect_bp2_srwd(struct flashctx *flash); +int spi_disable_blockprotect_bp3_srwd(struct flashctx *flash); +int spi_disable_blockprotect_bp4_srwd(struct flashctx *flash); int spi_prettyprint_status_register_amic_a25l032(struct flashctx *flash); int spi_prettyprint_status_register_at25df(struct flashctx *flash); int spi_prettyprint_status_register_at25df_sec(struct flashctx *flash); @@ -82,7 +87,6 @@ int spi_disable_blockprotect_at25f(struct flashctx *flash); int spi_disable_blockprotect_at25f512a(struct flashctx *flash); int spi_disable_blockprotect_at25f512b(struct flashctx *flash); -int spi_disable_blockprotect_at25f4096(struct flashctx *flash); int spi_disable_blockprotect_at25fs010(struct flashctx *flash); int spi_disable_blockprotect_at25fs040(struct flashctx *flash); int spi_prettyprint_status_register_s33(struct flashctx *flash); Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Mon Jun 24 00:15:39 2013 (r1680) +++ trunk/flashchips.c Fri Jun 28 23:28:27 2013 (r1681) @@ -1849,7 +1849,8 @@ } }, .printlock = spi_prettyprint_status_register_at25f4096, - .unlock = spi_disable_blockprotect_at25f4096, + /* "Bits 5-6 are 0s when device is not in an internal write cycle." Better leave them alone: */ + .unlock = spi_disable_blockprotect_bp2_srwd, .write = spi_chip_write_256, .read = spi_chip_read, .voltage = {2700, 3600}, @@ -4473,7 +4474,8 @@ .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .printlock = spi_prettyprint_status_register_default_bp4, + .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, Modified: trunk/spi25_statusreg.c ============================================================================== --- trunk/spi25_statusreg.c Mon Jun 24 00:15:39 2013 (r1680) +++ trunk/spi25_statusreg.c Fri Jun 28 23:28:27 2013 (r1681) @@ -196,6 +196,27 @@ return spi_disable_blockprotect_generic(flash, 0x3C, 0, 0, 0xFF); } +/* A common block protection disable that tries to unset the status register bits masked by 0x1C (BP0-2) and + * protected/locked by bit #7. Useful when bit #5 is neither a protection bit nor reserved (and hence possibly + * non-0). */ +int spi_disable_blockprotect_bp2_srwd(struct flashctx *flash) +{ + return spi_disable_blockprotect_generic(flash, 0x1C, 1 << 7, 0, 0xFF); +} + +/* A common block protection disable that tries to unset the status register bits masked by 0x3C (BP0-3) and + * protected/locked by bit #7. */ +int spi_disable_blockprotect_bp3_srwd(struct flashctx *flash) +{ + return spi_disable_blockprotect_generic(flash, 0x3C, 1 << 7, 0, 0xFF); +} + +/* A common block protection disable that tries to unset the status register bits masked by 0x7C (BP0-4) and + * protected/locked by bit #7. */ +int spi_disable_blockprotect_bp4_srwd(struct flashctx *flash) +{ + return spi_disable_blockprotect_generic(flash, 0x7C, 1 << 7, 0, 0xFF); +} static void spi_prettyprint_status_register_hex(uint8_t status) { @@ -261,6 +282,16 @@ return 0; } +/* Print the plain hex value and the welwip bits only. */ +int spi_prettyprint_status_register_default_welwip(struct flashctx *flash) +{ + uint8_t status = spi_read_status_register(flash); + spi_prettyprint_status_register_hex(status); + + spi_prettyprint_status_register_welwip(status); + return 0; +} + /* Works for many chips of the * AMIC A25L series * and MX MX25L512 @@ -312,6 +343,17 @@ return 0; } +int spi_prettyprint_status_register_default_bp4(struct flashctx *flash) +{ + uint8_t status = spi_read_status_register(flash); + spi_prettyprint_status_register_hex(status); + + spi_prettyprint_status_register_srwd(status); + spi_prettyprint_status_register_bp(status, 4); + spi_prettyprint_status_register_welwip(status); + return 0; +} + /* === Amic === * FIXME: spi_disable_blockprotect is incorrect but works fine for chips using * spi_prettyprint_status_register_default_bp1 or @@ -539,11 +581,6 @@ return spi_disable_blockprotect_generic(flash, 0x04, 1 << 7, 1 << 4, 0xFF); } -int spi_disable_blockprotect_at25f4096(struct flashctx *flash) -{ - return spi_disable_blockprotect_generic(flash, 0x1C, 1 << 7, 0, 0xFF); -} - int spi_disable_blockprotect_at25fs010(struct flashctx *flash) { return spi_disable_blockprotect_generic(flash, 0x6C, 1 << 7, 0, 0xFF); @@ -559,7 +596,7 @@ /* TODO: Clear P_FAIL and E_FAIL with Clear SR Fail Flags Command (30h) here? */ int spi_disable_blockprotect_s33(struct flashctx *flash) { - return spi_disable_blockprotect_generic(flash, 0x1C, 1 << 7, 0, 0xFF); + return spi_disable_blockprotect_bp2_srwd(flash); } int spi_prettyprint_status_register_s33(struct flashctx *flash)

1 0

Report: SAMSUNG 300V3A/300V4A/300V5A/200A4B/200A5B 05FI read
by dpcimanager＠users.sourceforge.net 28 Jun '13

28 Jun '13

flashrom v0.9.6.1-r1677 on Darwin 12.4.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.0, LLVM Clang 4.2 (clang-425.0.28), little endian Command line (5 args): /Volumes/CARD/DPCIManager.app/Contents/MacOS/flashrom -VV -r ~/Documents/SAMSUNG 300V3A:300V4A:300V5A:200A4B:200A5B 05FI.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 302M loops per second, 10 myus = 10 us, 100 myus = 97 us, 1000 myus = 1012 us, 10000 myus = 9748 us, 4 myus = 4 us, OK. Initializing internal programmer Mapping low megabyte at 0x00000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x00000400. No coreboot table found. DMI string system-manufacturer: "SAMSUNG ELECTRONICS CO., LTD." DMI string system-product-name: "300V3A/300V4A/300V5A/200A4B/200A5B" DMI string system-version: "0.1" DMI string baseboard-manufacturer: "SAMSUNG ELECTRONICS CO., LTD." DMI string baseboard-product-name: "300V3A/300V4A/300V5A/200A4B/200A5B" DMI string baseboard-version: "FAB1" DMI string chassis-type: "Laptop" Laptop detected via DMI. ======================================================================== WARNING! You seem to be running flashrom on an unsupported laptop. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See the manpage and http://www.flashrom.org/Laptops for details. If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== Aborting. Error: Programmer initialization failed.

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom