flashrom

flashrom@flashrom.org

5 participants
9161 discussions

Test-Results for "SST25LF080(A)"
by The Raven 08 Apr '15

08 Apr '15

Here are the results for the "SST25LF080(A)" tested with arduino and serprog: Probe: OK Read: OK Erase: Not OK! Write: Not OK! I am not sure why, but it seems that all write operations fail. See the attached log for details (the write and erase-log is nearby the same, so i attach only the erase-log). If i can do (or test) something, let me know. Greets

1 0

W836xx: PCA System Board A70M U3; UMA: flashrom -V
by Nathaniel Stenzel 07 Apr '15

07 Apr '15

flashrom v0.9.7-r1850 on Linux 3.18.7-200.fc21.x86_64 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.1, GCC 4.9.1 20140813 (Red Hat 4.9.1-7), little endian Command line (3 args): flashrom -V -p internal:laptop=force_I_want_a_brick Calibrating delay loop... OS timer resolution is 1 usecs, 687M loops per second, delay more than 10% too short (got 86% of expected delay), recalculating... 747M loops per second, 10 myus = 9 us, 100 myus = 141 us, 1000 myus = 939 us, 10000 myus = 9985 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. Using External DMI decoder. DMI string chassis-type: "Notebook" Laptop detected via DMI. DMI string system-manufacturer: "Hewlett-Packard" DMI string system-product-name: "HP Pavilion dv6 Notebook PC" DMI string system-version: "068D210003204710000620100" DMI string baseboard-manufacturer: "Hewlett-Packard" DMI string baseboard-product-name: "1805" DMI string baseboard-version: "33.58" W836xx enter config mode worked or we were already in config mode. W836xx leave config mode had no effect. Active config mode, unknown reg 0x20 ID: 85. Please send the output of "flashrom -V -p internal" to flashrom(a)flashrom.org with W836xx: your board name: flashrom -V as the subject to help us finish support for your Super I/O. Thanks. Found ITE EC, ID 0x8518, Rev 0x02 on port 0x4e. ======================================================================== WARNING! You seem to be running flashrom on an unsupported laptop. Laptops, notebooks and netbooks are difficult to support and we recommend to use the vendor flashing utility. The embedded controller (EC) in these machines often interacts badly with flashing. See the manpage and http://www.flashrom.org/Laptops for details. If flash is shared with the EC, erase is guaranteed to brick your laptop and write may brick your laptop. Read and probe may irritate your EC and cause fan failure, backlight failure and sudden poweroff. You have been warned. ======================================================================== Proceeding anyway because user forced us to. Found chipset "AMD FCH" with PCI ID 1022:780e. Enabling flash write... SPI base address is at 0xfec10000 Hudson-2/3/4 detected. SpiRomEnable=1, PrefetchEnSPIFromIMC=0, PrefetchEnSPIFromHost=1 (0x0fc80000) SpiArbEnable=1, SpiAccessMacRomEn=1, SpiHostAccessRomEn=1, ArbWaitCount=7, SpiBridgeDisable=1, SpiBusy=0 Using SPI_CS0 GPIO11 used for SPI_DO GPIO12 used for SPI_DI GPIO31 used for SPI_HOLD GPIO32 used for SPI_CS GPIO47 used for SPI_CLK Fast Reads are disabled NormSpeed is 16.5 MHz Setting SPI clock to 16.5 MHz (0x3). IMC is not active. ROM strap override is not active OK. The following protocols are supported: LPC, FWH, SPI. Probing for AMIC A25L05PT, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L05PU, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L10PT, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L10PU, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L20PT, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L20PU, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L40PT, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L40PU, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L80P, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L16PT, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L16PU, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L512, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L010, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L020, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L040, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L080, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L016, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25L032, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25LQ16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for AMIC A25LQ64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT25DF021, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT25DF041A, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT25DF081, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT25DF081A, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT25DF161, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT25DF321, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT25DF321A, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT25DF641(A), 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT25DL081, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT25DL161, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT25DQ161, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT25F512, 64 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F512A, 64 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F512B, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT25F1024(A), 128 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F2048, 256 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F4096, 512 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25FS010, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT25FS040, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT26DF041, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT26DF081A, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT26DF161, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT26DF161A, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT26F004, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT45CS1282, 16896 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT45DB011D, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT45DB021D, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT45DB041D, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT45DB081D, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT45DB161D, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT45DB321C, 4224 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT45DB321D, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT45DB321E, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel AT45DB642D, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for ESMT F25L008A, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for ESMT F25L32PA, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B05, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B05T, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B10T, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B20T, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B40T, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B80T, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B16T, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B32T, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25B64T, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25F05, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25F10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25F20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25F40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25F80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25F16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25F32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25F64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25Q40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25Q80(A), 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25Q16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25Q32(A/B), 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25Q64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25Q128, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25QH16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25QH32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25QH64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25QH128, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25S10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25S20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25S40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25S80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25S16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25S32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon EN25S64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for GigaDevice GD25LQ32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for GigaDevice GD25Q512, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for GigaDevice GD25Q10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for GigaDevice GD25Q20(B), 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for GigaDevice GD25Q40(B), 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for GigaDevice GD25Q80(B), 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for GigaDevice GD25Q16(B), 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for GigaDevice GD25Q32(B), 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for GigaDevice GD25Q64(B), 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for GigaDevice GD25Q128B, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for GigaDevice GD25T80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Intel 25F160S33B8, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Intel 25F160S33T8, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Intel 25F320S33B8, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Intel 25F320S33T8, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Intel 25F640S33B8, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Intel 25F640S33T8, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX23L1654, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX23L3254, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX23L6454, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX23L12854, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L2005(C), 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L4005(A/C), 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L1605, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L1605D/MX25L1608D/MX25L1673E, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L1635D, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L1635E, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L3205(A), 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L3206E, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L3273E, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L3235D, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L6405(D), 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L6445E/MX25L6473E, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25L12805(D), 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25U1635E, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25U3235E/F, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25U6435E/F, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix MX25U12835F, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25P05-A, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25P05, 64 kB: probe_spi_res1: id 0x0 Probing for Micron/Numonyx/ST M25P10-A, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25P10, 128 kB: probe_spi_res1: id 0x0 Probing for Micron/Numonyx/ST M25P20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25P20-old, 256 kB: probe_spi_res1: id 0x0 Probing for Micron/Numonyx/ST M25P40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25P40-old, 512 kB: probe_spi_res1: id 0x0 Probing for Micron/Numonyx/ST M25P80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25P16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25P32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25P64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25P128, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25PE10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25PE20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25PE40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25PE80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25PE16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25PX80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25PX16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25PX32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M25PX64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M45PE10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M45PE20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M45PE40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M45PE80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST M45PE16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST N25Q016, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Nantronics N25S10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Nantronics N25S20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Nantronics N25S40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Nantronics N25S80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Nantronics N25S16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for PMC Pm25LD256C, 32 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for PMC Pm25LD512(C), 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for PMC Pm25LD010(C), 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for PMC Pm25LD020(C), 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for PMC Pm25LD040(C), 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for PMC Pm25LV512(A), 64 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for PMC Pm25LV010, 128 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for PMC Pm25LV010A, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for PMC Pm25LV020, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for PMC Pm25LV040, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for PMC Pm25LV080B, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for PMC Pm25LV016B, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Sanyo LE25FW106, 128 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for Sanyo LE25FW406A, 512 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for Sanyo LE25FU406B, 512 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for Sanyo LE25FW203A, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Sanyo LE25FW403A, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Sanyo LE25FW418A, 512 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for Sanyo LE25FW806, 1024 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for Sanyo LE25FW808, 1024 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for Spansion S25FL004A, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL008A, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL016A, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL032A/P, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL064A/P, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL204K, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL208K, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL116K/S25FL216K, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL132K, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL164K, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL128P......0, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL128P......1, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL128S......0, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL128S......1, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL129P......0, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Spansion S25FL129P......1, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for SST SST25LF020A, 256 kB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for SST SST25LF080(A), 1024 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for SST SST25VF512(A), 64 kB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF010(A), 128 kB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF020, 256 kB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF020B, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF040B, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF080B, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for SST SST25VF016B, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for SST SST25VF032B, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for SST SST25VF064C, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for SST SST25WF512, 64 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for SST SST25WF010, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for SST SST25WF020, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for SST SST25WF040, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for SST SST25WF080, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25Q40.V, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25Q80.V, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25Q16.V, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25Q32.V, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25Q64.V, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25Q128.V, 16384 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25Q20.W, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25Q40.W, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25Q80.W, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25Q16.W, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25Q32.W, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25Q64.W, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25X10, 128 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25X20, 256 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25X40, 512 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25X80, 1024 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25X16, 2048 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25X32, 4096 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond W25X64, 8192 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Unknown SFDP-capable chip, 0 kB: No SFDP signature found. Probing for AMIC unknown AMIC SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Atmel unknown Atmel SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Eon unknown Eon SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Macronix unknown Macronix SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for PMC unknown PMC SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for SST unknown SST SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for ST unknown ST SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Probing for Generic unknown SPI chip (RDID), 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00 Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI) mapped at physical address 0x0000000000000000. Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0x0, id2 0x0 Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x56, id2 0xe8, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH00B4, 512 kB: probe_82802ab: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH004, 512 kB: probe_82802ab: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x8d, id2 0x1c, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x56, id2 0xe8, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x8d, id2 0x1c, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x56, id2 0xe8, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xfa, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x8d, id2 0x1c, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x8d, id2 0x1c, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0x56, id2 0xe8, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0x56, id2 0xe8, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x8d, id2 0x1c, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x8d, id2 0x1c, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x8d, id2 0x1c, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x56, id2 0xe8, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x8d, id2 0x1c, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW080, 1024 kB: probe_82802ab: id1 0x8d, id2 0x1c, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0x8d, id2 0x1c, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0x56, id2 0xe8, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x56, id2 0xe8, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x8d, id2 0x1c, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x02, id2 0x00, id1 is normal flash content, id2 is normal flash content Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI). === This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash chip. Please include the flashrom log file for all operations you tested (see the man page for details), and mention which mainboard or programmer you tested in the subject line. Thanks for your help! No operations were specified. Restoring MMIO space at 0x7f6c91fde00d

1 0

Re: [flashrom] Compile under MinGW32, how? (Topolinux)
by Topolinux 05 Apr '15

05 Apr '15

Hi Stefan, thank you very much for the prompt reply! Honestly I don't understand all you wrote although I'll do my best in order to do it. In the meantime I'm digging the matter having find some answers to my questions, but seems to me too complicated for me, out of my capabilities. OK, I can turn off libusb, but then the program that I'll get will be working? I guess it will be. Now I understand why nobody provide Windows version of flashrom each time there is an upgrade. Only Linux version that it is more easily obtainable. You wrote about cross-compiling flashrom for Windows, maybe that is more easy than compiling on a Windows system, which could be one solution. By reading http://flashrom.org/Windows page seems to me cross-compiling on Linux for Windows is more complicated though. If it isn't too much trouble could you please describe how do the job? I mean a description of your MinGW installation and the exact commands issued. Instructions on the site say $ cd flashrom $ make are enough in order to compile under Windows. Instead on Linux for Windows you need $ make CC=i586-mingw32msvc-gcc CPPFLAGS="-I.../libusb-headers/ -I.../libftdi-headers/" LDFLAGS="-L.../libusb-static/ -L.../libftdi-static/" If it could be possible to see a real life example I think it would be of much help. Another thing. In your example you compile with "i686" option while in the instructions on the flashrom Windows site it's used the "i586". Compiling by $ cd flashrom $ make there isn't any of the two options, so which option will be used in order to compile? My purpose is to get a flahrom executable which will be able to run on any generic Windows machine. Snapshots on http://ra.openbios.org/~idwer/flashrom/mingw/ I guess have been compiled in that way, apart from the mingw32-w64-flashrom-r1781.exe of course. Thanks again Stefan, Mit Freundlichen Grüßen, Topolinux Il Lunedì 16 Marzo 2015 12:00, "flashrom-request(a)flashrom.org" <flashrom-request(a)flashrom.org> ha scritto: Send flashrom mailing list submissions to flashrom(a)flashrom.org To subscribe or unsubscribe via the World Wide Web, visit http://www.flashrom.org/mailman/listinfo/flashrom or, via email, send a message with subject or body 'help' to flashrom-request(a)flashrom.org You can reach the person managing the list at flashrom-owner(a)flashrom.org When replying, please edit your Subject line so it is more specific than "Re: Contents of flashrom digest..." Today's Topics: 1. Re: Compile under MinGW32, how? (Stefan Tauner) ---------------------------------------------------------------------- Message: 1 Date: Sun, 15 Mar 2015 23:14:51 +0100 From: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> To: Topolinux <mailing_l1st(a)yahoo.it> Cc: flashrom(a)flashrom.org Subject: Re: [flashrom] Compile under MinGW32, how? Message-ID: <201503152214.t2FMEqKP009468(a)mail2.student.tuwien.ac.at> Content-Type: text/plain; charset=UTF-8 On Sun, 15 Mar 2015 20:41:22 +0000 (UTC) Topolinux <mailing_l1st(a)yahoo.it> wrote: > Hi guys, > sorry to disturb you. > Based on instructions I saw here: > http://flashrom.org/Windows > I installed MinGW32 on my Windows XP machine in order to try to compile the latest flashrom release which I need. > Sadly I'm unable to compile anything because I get the errors as follow: > > ************************************************************************************** > $ make > Files don't seem to be under version control. Replacing all version templates wi > th 0.9.8-r1888. > Package libftdi was not found in the pkg-config search path. > Perhaps you should add the directory containing `libftdi.pc' > to the PKG_CONFIG_PATH environment variable > No package 'libftdi' found > Package libusb was not found in the pkg-config search path. > Perhaps you should add the directory containing `libusb.pc' > to the PKG_CONFIG_PATH environment variable > No package 'libusb' found > Checking for a C compiler... found. > Target arch is x86 > Target OS is MinGW > Checking for libusb-0.1/libusb-compat headers... .test.c:3:23: fatal error: lusb > 0_usb.h: No such file or directory > ?#include <lusb0_usb.h> > ?????????????????????? ^ > compilation terminated. > not found. > > Please install libusb-0.1 headers or libusb-compat headers. > See README for more information. > > make: *** [hwlibs] Error 1 > ************************************************************************************** > > A weird thing is that I had to manually install the pkg-config package, that isn't listed in the instructions. > Anyway I'm pretty sure I have all the files in the right places and I guess my fault is due the fact I'm not able to figure how and where edit the PKG_CONFIG_PATH that indeed I haven't in nowhere. > I wonder where I can see an example of PKG_CONFIG_PATH, any suggestions? > Thanks. > I need compile flashrom for Bus Pirate, so is there any mandatory flag that have to be set? > Honestly I didn't know it was so complicated to compile for Windows, by read of the instructions it seemed to me pretty easy, but it isn't. > Is perhaps there any documentations that explain clearly how do the job? > I think that a description of the folders and the files inside them can be enough in order to understand, sadly I have seen nothing like that. > Last but not least. > Maybe I'm wrong, though seems to me that the way as MinGW is installed allows to move the installation easily, almost like an portable application. > Am I wrong? > If I'm not wrong this means that should be possible achieve a running environment if someone would provide one. > Anyway I'm pretty sure that being be able to see a working installation would help to settle the matter. > Thanks for reading! The documentation is not up to date. flashrom requires libusb now at build time because of the inclusion of a libusb-based programmer. You can turn it off (and thus enable compilation without libusb) by adding CONFIG_PICKIT2_SPI=no to the command line (for now). I am only cross-compiling flashrom for windows so I am not sure if that helps you, but there I am using the newly introduced LIBS_BASE make parameter to indicate the path containing the include and lib directories with the respective header and library files like so: make LIBS_BASE=/home/flashrom/cross-libs/i686-w64-mingw32 The layout within that directory should look like the common unix layout, i.e. /lib containing *.a, /bin with *.dll and /include with *.h files. The PKG_CONFIG_PATH message can be ignored usually. The default will probably work anyway. -- Kind regards/Mit freundlichen Gr??en, Stefan Tauner ------------------------------ Subject: Digest Footer _______________________________________________ flashrom mailing list flashrom(a)flashrom.org http://www.flashrom.org/mailman/listinfo/flashrom ------------------------------ End of flashrom Digest, Vol 70, Issue 28 ****************************************

2 2

Re: [flashrom] Failed
by Stefan Tauner 04 Apr '15

04 Apr '15

On Sat, 4 Apr 2015 18:48:50 +0000 (UTC) Julio Cesar Lucas <jcalucas(a)yahoo.com.br> wrote: > Hi friends, i have been trying write Eprom Macronix MX25L3206E (4MB) > Program "SPIPGM.exe is OK ! But, flashrom.exe -p rayer_spi -w boot.bin (not work)I have checked connections, port LPT and solder points. I guess nothing is wrong. > Get message error "Uh oh erese/write failed" > Attached 2 screens, > Please, i need help > Thanks in advanced,Julio LucasBrazil Hi Julio, the MX25L3206E is different from MX25L3205 variations although they share the same ID. We have changed flashrom in r1657 to make that more obvious to the user. However, these differences of the chips do only explain the first two erase failures. The last two tries should erase the full chip and that should always work. I have no theory why it does not. You could try a newer version of flashrom but I can't think of any change since your version that could fix your problem. Have you connected all pins of the flash chip? You said SPIPGM is ok... but have you tried writing with it as well or just probing the chip? By the way you create log files with the --output (or -o for short) option. These would be very much preferred to big (incomplete) pictures :) -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

W836xx: GIGABYTE GA-MA785GMT-UD2H rev 1.1 : flashrom -V
by George Chriss 04 Apr '15

04 Apr '15

attached

1 0

Re: [flashrom] [PATCH] add support for Pm25LQ032
by Stefan Tauner 04 Apr '15

04 Apr '15

On Sat, 14 Mar 2015 15:00:10 +0000 Steven Honeyman <stevenhoneyman(a)gmail.com> wrote: > I found this in a Chinese router, read tested (twice, successful) but > not yet write/erase tested. > Based on information from the datasheet at > http://www.chingistek.com/img/Product_Files/Pm25LQ032C%20datasheet%20v1.6.1… > > Signed-off-by: Steven Honeyman <stevenhoneyman(a)gmail.com> Hi Steven, thanks for your patch. There are a number of similar chips (Pm25LQ020, Pm25LQ040, Pm25LQ080, Pm25LQ016). Do you want to add support for them too? > Index: flashchips.c > =================================================================== > --- flashchips.c (revision 1888) > +++ flashchips.c (working copy) > @@ -9708,8 +9708,46 @@ > .voltage = {2700, 3600}, /* 2.3-3.6V for Pm25LD040 */ > }, > > -{ > + { > .vendor = "PMC", > + .name = "Pm25LQ032", Have you found any traces of a Pm25LQ032 without a C suffix? I don't and would rather add the C suffix here (and in the ID macro) until we have proof they really exist. > + .bustype = BUS_SPI, > + .manufacture_id = PMC_ID, > + .model_id = PMC_PM25LQ032, > + .total_size = 4096, > + .page_size = 256, > + .feature_bits = FEATURE_WRSR_WREN, Missing OTP flag and information. > + .tested = TEST_OK_PR, > + .probe = probe_spi_rdid, > + .probe_timing = TIMING_ZERO, > + .block_erasers = > + { > + { > + .eraseblocks = { {4 * 1024, 1024} }, > + .block_erase = spi_block_erase_20, /* sector erase */ All these comments are redundant. Experienced flashrom hacker will instantly deduce that from the erase block size(s). > + }, { > + .eraseblocks = { {4 * 1024, 1024} }, > + .block_erase = spi_block_erase_d7, /* sector erase */ > + }, { > + .eraseblocks = { {64 * 1024, 64} }, > + .block_erase = spi_block_erase_d8, /* block erase */ > + }, { > + .eraseblocks = { {4096 * 1024, 1} }, > + .block_erase = spi_block_erase_60, /* chip erase */ > + }, { > + .eraseblocks = { {4096 * 1024, 1} }, > + .block_erase = spi_block_erase_c7, /* chip erase */ > + } > + }, > + .printlock = spi_prettyprint_status_register_bp3_srwd, bit 6 is quad enable > + .unlock = spi_disable_blockprotect_bp3_srwd, > + .write = spi_chip_write_256, > + .read = spi_chip_read, /* Fast read (0x0B), dual I/O > supported */ Actually it supports even multi I/O > + .voltage = {2700, 3600}, /* 2.7-3.6V for Pm25Q032 */ The comment there is redundant (and contains a typo). We only comment the cases where multiple chips share the same ID but have different voltage ranges. The smaller range goes into the code, the broader one gets commented. > + }, > + > + { > + .vendor = "PMC", > .name = "Pm25LV512(A)", > .bustype = BUS_SPI, > .manufacture_id = PMC_ID_NOPREFIX, > Index: flashchips.h > =================================================================== > --- flashchips.h (revision 1888) > +++ flashchips.h (working copy) > @@ -560,6 +560,7 @@ > #define PMC_PM25LD512 0x20 /* Same as Pm25LD512C, but the > latter has more locking options. */ > #define PMC_PM25LD010 0x21 /* Same as Pm25LD010C, but the > latter has more locking options. */ > #define PMC_PM25LD020 0x22 /* Same as Pm25LD020C, but the > latter has more locking options. */ > +#define PMC_PM25LQ032 0x46 > #define PMC_PM25LV512 0x7B /* Same as Pm25LV512A */ > #define PMC_PM25LV010 0x7C /* Same as Pm25LV010A, but the > former does not support RDID but RES3 only. */ > #define PMC_PM25LV020 0x7D The important parts are all correct and I think erase/write should just work, thank you. If you plan to add the other members of this chip's family please supersede this patch with the new one and include the corrections mentioned above. If you do not want to add them please say so and I'll correct it myself before committing. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

Results for "AT45DB321D"
by The Raven 04 Apr '15

04 Apr '15

Hi All Operations work fine! Chip can be marked as tested.

2 1

Re: [flashrom] Intel 28F001BN/BX-T erase/write operation verified on 3C905B-TXNM
by Stefan Tauner 04 Apr '15

04 Apr '15

On Sun, 4 Jan 2015 01:36:53 +0800 Lu Xie <lxie1(a)andrew.cmu.edu> wrote: > Hi, > > I performed another erase and 5 write operations on that chip with the same > network adapter. Hopefully it has some useful data here. > I flashed the chip with different BIOS's and they work on their desired > boards. Hello Lu, thanks for your effort! I just wanted to make sure everything is fine, hence my question. I have marked the flash chip as fully tested and will commit that later together with other small changes. Sorry for the delay. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

my new motherboard
by Big Valley Radio 04 Apr '15

04 Apr '15

so new it does not work! I need sound for Rivendell. Everything else seems to function. Attached file should have what you need to know. ASROCK H81M-DGS R2.0 Intel CPU thanks for being there! I spent a few days on this regards Robert Jeffares

1 0

Re: [flashrom] [PATCH] New GigaDevice chips
by Stefan Tauner 03 Apr '15

03 Apr '15

On Mon, 9 Mar 2015 10:18:36 +1000 Roman Titov <titovroman(a)gmail.com> wrote: Hello Roman! > Well, I think this could be the result of my inexperience with svn > (and git-svn). > > So, here's my steps: > 1. git svn clone -rHEAD (r1887, to be exact) flashrom-trunk (I have an > error, when I'm trying to make full git svn clone, looks like git bug > :/) > 2. *code* > 3. make 2 local commits > 4. git format-patch, and it throw me 2 patches for 2 latest commits > not over current origin (and I think thats is the reason) > 5. send patches to mailing list That's perfectly fine and how I work too (well, I use git send-email for 4 and 5). > My suggestions would be: > 1. shallow copying broke smth (idea, that git svn could bond git stuff > to full svn history stuff came to me just right now) > 2. formating 2 patches broke smth > 3. both? The problem is/was the last hunk. I guess you have opened the patch file in an editor that removes white space at the end of lines. The patch application does not seem to care but git-am does. Anyway, here is a list of things I have noticed in the patch. > From 3612049b7f6b2283ae4e593e66f369144b9e997b Mon Sep 17 00:00:00 2001 > From: Roman Titov <titovroman(a)gmail.com> > Date: Fri, 6 Mar 2015 17:18:43 +1000 > Subject: [PATCH 1/2] flashchips: new GigaDevice chips (GD25LQ40, GD25LQ80, > GD25LQ16, GD25LQ64(B), GD25LQ128) > > Signed-off-by: Roman Titov <titovroman(a)gmail.com> > > --- > flashchips.c | 197 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++- > 1 file changed, 196 insertions(+), 1 deletion(-) > > diff --git a/flashchips.c b/flashchips.c > index 8b5d1ec..31541ea 100644 > --- a/flashchips.c > +++ b/flashchips.c > @@ -5466,6 +5466,123 @@ const struct flashchip flashchips[] = { > > { > .vendor = "GigaDevice", > + .name = "GD25LQ40", > + .bustype = BUS_SPI, > + .manufacture_id = GIGADEVICE_ID, > + .model_id = GIGADEVICE_GD25LQ40, > + .total_size = 512, > + .page_size = 256, > + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ > + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, > + .tested = TEST_OK_PREW, According to the line above and the respective ones later, you had all that hardware at hand and tested it successfully. Correct me if I am wrong, but I don't think that's the case ;) > + .probe = probe_spi_rdid, > + .probe_timing = TIMING_ZERO, > + .block_erasers = > + { > + { > + .eraseblocks = { {4 * 1024, 128} }, > + .block_erase = spi_block_erase_20, > + }, { > + .eraseblocks = { {32 * 1024, 16} }, > + .block_erase = spi_block_erase_52, > + }, { > + .eraseblocks = { {64 * 1024, 8} }, > + .block_erase = spi_block_erase_d8, > + }, { > + .eraseblocks = { {512 * 1024, 1} }, > + .block_erase = spi_block_erase_60, > + }, { > + .eraseblocks = { {512 * 1024, 1} }, > + .block_erase = spi_block_erase_c7, > + } > + }, > + .printlock = spi_prettyprint_status_register_bp4_srwd, > + .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ > + .write = spi_chip_write_256, > + .read = spi_chip_read, The chips support multiple read and opcodes (unlike flashrom yet!). We note that at least for new chips by adding a comment like this: /* Fast read (0x0B) and multi I/O supported */ (cf. with similar comments throughout the file). > + .voltage = {1700, 1950}, It should actually be 1695, 1950 instead. This is also an error in the existing definition of the GD25LQ32. Apart from these repeated copy & paste errors it looks good. Please fix them so that I can commit your first flashrom contribution, thanks! Have you noticed any differences between the GD25LQ64 and its B revision? -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom