flashrom

flashrom@flashrom.org

5 participants
9161 discussions

Any chance of getting Flashrom 0.9.8 for DOS?
by Lu Xie 04 Dec '16

04 Dec '16

Hi, I have been quite happy with the 0.9.6.1 release for DOS and I decided to get a newer version. I tried several compiled executables from the buildbot repository but they are all unstable. I did a search in the wayback machine and found that 0.9.8 was the last stable release that had a DOS executable stored outside the buildbot repository, but the link (http://ra.openbios.org/~idwer/flashrom/dos/) seems to be dead. I googled for hours but couldn't find a copy of a 0.9.8 DOS executable. Could you please send me a copy of it from your archive or repository? Thanks. Lu

1 0

[PATCH] internal: Dont define functions on yet unsupported architechtures
by Urja Rannikko 04 Dec '16

04 Dec '16

This fixes a warning with newer (6.1) gcc on ARM, as tested by swiftgeek on irc. Signed-off-by: Urja Rannikko <urjaman(a)gmail.com> --- internal.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/internal.c b/internal.c index 4062b64..aa5f1d1 100644 --- a/internal.c +++ b/internal.c @@ -131,6 +131,8 @@ int register_superio(struct superio s) int is_laptop = 0; int laptop_ok = 0; +/* This matches with the #if for the registration of par_master_internal */ +#if IS_X86 || IS_MIPS static void internal_chip_writeb(const struct flashctx *flash, uint8_t val, chipaddr addr); static void internal_chip_writew(const struct flashctx *flash, uint16_t val, @@ -155,6 +157,7 @@ static const struct par_master par_master_internal = { .chip_writel = internal_chip_writel, .chip_writen = fallback_chip_writen, }; +#endif enum chipbustype internal_buses_supported = BUS_NONE; @@ -358,6 +361,8 @@ int internal_init(void) } #endif +/* This matches with the #if for the registration of par_master_internal */ +#if IS_X86 || IS_MIPS static void internal_chip_writeb(const struct flashctx *flash, uint8_t val, chipaddr addr) { @@ -400,3 +405,4 @@ static void internal_chip_readn(const struct flashctx *flash, uint8_t *buf, mmio_readn((void *)addr, buf, len); return; } +#endif -- 2.9.3

2 1

Re: [flashrom] [patch] serprog hangs under FreeBSD
by Stefan Tauner 04 Dec '16

04 Dec '16

On Fri, 2 Dec 2016 18:41:26 +0300 Michael Zhilin <mizhka(a)gmail.com> wrote: > Hi, > > This is attached patch to avoid hang of serprog under FreeBSD. Patch is > against trunk (r1955, 10 context lines). > > My use case is flashrom+serprog to read SPI flash (MX25L6406) via Arduino > Nano V3. Actual command is: > /usr/local/bin/flashrom -p serprog:dev=/dev/cuaU0:57600 -c > MX25L6406E/MX25L6408E -r tcw770.dump > > Using flashrom 0.9.9 it hangs after 5 seconds on read from tty ("ttyin"). > The problem is that kernel method "ttydisc_rint" ignore same bytes. It > happens due to enabled IEXTEN local flag of termios. TTY cuts few bytes, > Arduino reads 11264 bytes, but flashrom gets 11244 bytes (corrupted) and > waits for remaining 20 bytes. > > The fix is simple: turn off IEXTEN local flag. > > Tested on Arduino Nano V3 + FreeBSD 12-CURRENT. But I didn't check > compilation on other BSD / Linux distros. Could you please test it and let > me know results? > > Signed-off-by: Michael Zhilin <mizhka(a)gmail.com> > I've added signed-off-by here, because I don't know how to add it into svn > patch. > It's my first patch, so please let me know if i miss anything. Thank you Michael! I have verified that it builds fine: http://buildbot.flashrom.org/buildresults/flashrom-000559-9j8/results.html I will merge it as soon as we finished migrating to git (and gerrit+jenkins). -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] In-System Programming
by Arian Sanusi 03 Dec '16

03 Dec '16

Hi Lorentz > Now what I am wondering if I can do In-System Programming by powering up the mainboard and only use the data pins of the spi header. Problem is I don't know if this is possible, because CS# and DO are also on high level! And what do I do with the clk signal? Is it povided by the mainboard and messes up with the signal of the programmer? Or is it possible that the chip is electrically damaged, although I can read out its ID? Soldering it out is what I want to do last! Check whether CS#, DO are connected by pull-ups with an ohmmeter when the system is shut down. I think I saw a board where CS# was wired that way. That way you can actively drive down CS# and be fine. However, I'd at least check whether there's bus activity before doing anything... cheers, Arian

1 0

[patch] serprog hangs under FreeBSD
by Michael Zhilin 02 Dec '16

02 Dec '16

Hi, This is attached patch to avoid hang of serprog under FreeBSD. Patch is against trunk (r1955, 10 context lines). My use case is flashrom+serprog to read SPI flash (MX25L6406) via Arduino Nano V3. Actual command is: /usr/local/bin/flashrom -p serprog:dev=/dev/cuaU0:57600 -c MX25L6406E/MX25L6408E -r tcw770.dump Using flashrom 0.9.9 it hangs after 5 seconds on read from tty ("ttyin"). The problem is that kernel method "ttydisc_rint" ignore same bytes. It happens due to enabled IEXTEN local flag of termios. TTY cuts few bytes, Arduino reads 11264 bytes, but flashrom gets 11244 bytes (corrupted) and waits for remaining 20 bytes. The fix is simple: turn off IEXTEN local flag. Tested on Arduino Nano V3 + FreeBSD 12-CURRENT. But I didn't check compilation on other BSD / Linux distros. Could you please test it and let me know results? Signed-off-by: Michael Zhilin <mizhka(a)gmail.com> I've added signed-off-by here, because I don't know how to add it into svn patch. It's my first patch, so please let me know if i miss anything. Thanks, Michael!

1 0

In-System Programming
by Lorenz Litzenberger 02 Dec '16

02 Dec '16

1 0

Re: [flashrom] How to only flash BIOS region on braswell.
by Nico Huber 23 Nov '16

23 Nov '16

On 23.11.2016 08:46, Sampson Lee wrote: > Hi Nico, > > The BIOS bin and log in attachment. the `--layout` parameter needs a special file that only specifies the layout. You'd still give your flash image to the `-w` parameter. Please read the section about the `--layout` parameter in the flashrom manual page (e.g. [1]). As you are working with coreboot, you can generate the layout file from the flash image with ifdtool's `-f` parameter (it's in util/ifdtool/ in the coreboot source tree). Hope that helps, Nico [1] https://linux.die.net/man/8/flashrom > > Thanks. > Sampson. > > 2016-11-23 3:20 GMT+08:00 Nico Huber <nico.h(a)gmx.de>: > >> Hi Sampson, >> >> On 21.11.2016 04:33, Sampson Lee wrote: >>> I add a few point: >>> >>> I use flshrom version:0.99. >>> I try command "--layout" to read my rom file,but it show error message >>> "error parsing layout file". >> >> well, it means what it says, flashrom can't understand the file you gave >> to the `--layout` parameter. >> >> Please send us your layout file and a full log of the failing command >> (e.g. by adding `-o logfile.txt` to the flashrom command line). >> >> Regards, >> Nico >> >> >

1 0

[PATCH] Convert flashrom to git
by Stefan Tauner 23 Nov '16

23 Nov '16

- Drop support for Subversion in the getrevision script and Makefile. - Add .gitignore file - Restore modification dates of the exported files from the SCM. - Stop exporting SCM log dumps to CHANGELOG. This makes no sense. - Do not export the pre-"compiled" manpage. It can be generated like anything else from the code dump when we export the respective variable. The latter is added with this change. - Add some initial client-side git hooks * When committing check for obvious stuff you never want anyway: - white space errors - duplicate sign-offs * When pushing to the upstream repository check mandatory rules: - existing signoffs and acks in all new commits - no deletions or creation of branches - do not rewrite history of the precious branches, even if forced - Change version string of flashrom as follows. Previously, we included the last stable version according to a hard- coded string in the Makefile and appended the subversion revision number. With this patch the version string includes the last reachable git tag, number of commits since said tag in the upstream branches (if any), the name of said upstream branch, number of commits since that branch (if any), and the shortened git hash. In case there are uncommitted changes a "-dirty" indicator is also added. The case of unknown versions is explicitly handled in getrevision instead of simply appending "-unknown" to a hardcoded release number. The version information is either taken from an existing git remote pointing to an upstream repository (or a known mirror), or if that is not available - with the user's consent - a shadow copy is fetched from the upstream repo that is updated on every build (usually takes less than a second). In the following some examples of the version string changes are shown. Basically we print the distance to the last known upstream tag, which comprises any upstream commits since that tag as well as local commits on top of that. Additionally we handle upstream's stable and staging branches specially. Old output: flashrom v0.9.7-r1716 on Linux 3.8.0-6-generic (x86_64) New output variants: Build of the 0.9.99 release without any changes: flashrom 0.9.99-e4f6643 on Linux 3.13.0-76-generic (x86_64) 5 commits since last tag in upstream's stable branch: flashrom 0.9.99-5-stable-e4f6643-dirty on Linux 3.13.0-76-generic (x86_64) 3 commits since last tag in upstream's staging branch and 4 local commits on top of that: flashrom 0.9.99-3-staging-4-e4f6643 on Linux 3.13.0-76-generic (x86_64) 3 commits since last tag in upstream's staging branch and 4 local commits on top of that, and some local uncommitted changes too: flashrom 0.9.99-3-staging-4-e4f6643-dirty on Linux 3.13.0-76-generic (x86_64) 3 commits since the last tag in an unrelated upstream branch (e.g., a stable release *branch* such as 0.9.99) or local branch: flashrom 0.9.99-3-e4f6643 on Linux 3.13.0-76-generic (x86_64) No tags reachable from current commit (generic git fallback): flashrom d95935a version on Linux 3.13.0-76-generic (x86_64) Not in a repository: flashrom unknown version on Linux 3.13.0-76-generic (x86_64) Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> --- .gitignore | 14 +++ Makefile | 45 +++++--- flashrom.c | 2 +- util/getrevision.sh | 257 +++++++++++++++++++++++++++--------------- util/git-hooks/applypatch-msg | 15 +++ util/git-hooks/commit-msg | 15 +++ util/git-hooks/install.sh | 17 +++ util/git-hooks/pre-applypatch | 12 ++ util/git-hooks/pre-commit | 9 ++ util/git-hooks/pre-push | 74 ++++++++++++ util/git-hooks/wrapper.sh | 10 ++ 11 files changed, 360 insertions(+), 110 deletions(-) create mode 100644 .gitignore create mode 100755 util/git-hooks/applypatch-msg create mode 100755 util/git-hooks/commit-msg create mode 100755 util/git-hooks/install.sh create mode 100755 util/git-hooks/pre-applypatch create mode 100755 util/git-hooks/pre-commit create mode 100755 util/git-hooks/pre-push create mode 100755 util/git-hooks/wrapper.sh This is my current state of the infrastructure "needed" for flashrom to convert to git. Most of it is concerned with the version string generation and I had to jump through a number of hoops to get this far. The exact version strings are not final (e.g., tags and thus the first part of the string will get a 'v' prepended). We also need to find a proper way to integrate this into Gerrit... but it's a start *ahem* ;) You can test this code and the respective repo by cloning from here: https://flashrom.org/git/flashrom.git However, this is not final and *will* change before we finalize the migration. Currently the genuine source of flashrom's source is still the subversion repo! diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..c478a67 --- /dev/null +++ b/.gitignore @@ -0,0 +1,14 @@ +*.d +*.o +/.features +/.dependencies +/.libdeps +/build_details.txt +/flashrom +/flashrom.exe +/flashrom.8 + +/util/ich_descriptors_tool/ich_descriptors_tool +/util/ich_descriptors_tool/ich_descriptors_tool.exe +/util/ich_descriptors_tool/.dep +/util/ich_descriptors_tool/.obj diff --git a/Makefile b/Makefile index 4ebde1e..c880764 100644 --- a/Makefile +++ b/Makefile @@ -526,18 +526,20 @@ LIB_OBJS = layout.o flashrom.o udelay.o programmer.o helpers.o CLI_OBJS = cli_classic.o cli_output.o cli_common.o print.o -# Set the flashrom version string from the highest revision number of the checked out flashrom files. +# Set the flashrom version string from the repository metadata (cf. util/getrevision.sh). # Note to packagers: Any tree exported with "make export" or "make tarball" -# will not require subversion. The downloadable snapshots are already exported. -SVNVERSION := $(shell ./util/getrevision.sh -u 2>/dev/null ) - -RELEASE := 0.9.9 -VERSION := $(RELEASE)-$(SVNVERSION) -RELEASENAME ?= $(VERSION) +# will not require git. The downloadable snapshots are already exported. +VERSION := $(shell ./util/getrevision.sh --revision) +# VERSION equals "offline" if online access is required but the respective git config variable is not set yet. +ifeq ($(VERSION),offline) + $(error Aborting.) +endif +SCMDEF := -D'FLASHROM_VERSION="$(VERSION)"' -SVNDEF := -D'FLASHROM_VERSION="$(VERSION)"' +# No spaces in release names unless set explicitly +RELEASENAME ?= $(shell echo "$(VERSION)" | sed -e 's/ /_/') -# Inform user if there is no meaningful version string. If there is version information from a VCS print +# Inform user about the version string used. If there is no version information from a VCS then print # something anyway because $(info...) will print a line break in any case which would look suspicious. # The && between the echos is a workaround for old versions of GNU make that issue the error "unterminated # variable reference" if a semicolon is used instead. @@ -1024,7 +1026,7 @@ libflashrom.a: $(LIBFLASHROM_OBJS) TAROPTIONS = $(shell LC_ALL=C tar --version|grep -q GNU && echo "--owner=root --group=root") %.o: %.c .features - $(CC) -MMD $(CFLAGS) $(CPPFLAGS) $(FLASHROM_CFLAGS) $(FEATURE_CFLAGS) $(SVNDEF) -o $@ -c $< + $(CC) -MMD $(CFLAGS) $(CPPFLAGS) $(FLASHROM_CFLAGS) $(FEATURE_CFLAGS) $(SCMDEF) -o $@ -c $< # Make sure to add all names of generated binaries here. # This includes all frontends and libflashrom. @@ -1344,12 +1346,16 @@ endif @$(DIFF) -q .features.tmp .features >/dev/null 2>&1 && rm .features.tmp || mv .features.tmp .features @rm -f .featuretest.c .featuretest$(EXEC_SUFFIX) + +$(shell ./util/git-hooks/install.sh) # Automatically install if need be + $(PROGRAM).8.html: $(PROGRAM).8 @groff -mandoc -Thtml $< >$@ +MAN_DATE := $(shell ./util/getrevision.sh -d $(PROGRAM).8.tmpl 2>/dev/null) $(PROGRAM).8: $(PROGRAM).8.tmpl @# Add the man page change date and version to the man page - @sed -e 's#.TH FLASHROM 8 ".*".*#.TH FLASHROM 8 "$(shell ./util/getrevision.sh -d $(PROGRAM).8.tmpl 2>/dev/null)" "$(VERSION)"#' <$< >$@ + @sed -e 's#.TH FLASHROM 8 .*#.TH FLASHROM 8 "$(MAN_DATE)" "$(VERSION)" "$(MAN_DATE)"#' <$< >$@ install: $(PROGRAM)$(EXEC_SUFFIX) $(PROGRAM).8 mkdir -p $(DESTDIR)$(PREFIX)/sbin @@ -1358,12 +1364,17 @@ install: $(PROGRAM)$(EXEC_SUFFIX) $(PROGRAM).8 $(INSTALL) -m 0644 $(PROGRAM).8 $(DESTDIR)$(MANDIR)/man8 export: $(PROGRAM).8 - @rm -rf $(EXPORTDIR)/flashrom-$(RELEASENAME) - @svn export -r BASE . $(EXPORTDIR)/flashrom-$(RELEASENAME) - @sed "s/^SVNVERSION.*/SVNVERSION := $(SVNVERSION)/" Makefile >$(EXPORTDIR)/flashrom-$(RELEASENAME)/Makefile - @cp $(PROGRAM).8 "$(EXPORTDIR)/flashrom-$(RELEASENAME)/$(PROGRAM).8" - @svn log >$(EXPORTDIR)/flashrom-$(RELEASENAME)/ChangeLog - @echo Exported $(EXPORTDIR)/flashrom-$(RELEASENAME)/ + @rm -rf "$(EXPORTDIR)/flashrom-$(RELEASENAME)" + @mkdir -p "$(EXPORTDIR)/flashrom-$(RELEASENAME)" + @git archive HEAD | tar -x -C "$(EXPORTDIR)/flashrom-$(RELEASENAME)" + @sed -e 's/^VERSION :=.*/VERSION := $(VERSION)/' \ + -e 's/^MAN_DATE :=.*/MAN_DATE := $(MAN_DATE)/' \ + -e 's#./util/getrevision.sh -c#false#' \ + Makefile >"$(EXPORTDIR)/flashrom-$(RELEASENAME)/Makefile" + @for f in `git ls-tree -r -t --full-name --name-only HEAD` ; do \ + touch -d `git log --pretty=format:%cI -1 HEAD -- "$$f"` "$(EXPORTDIR)/flashrom-$(RELEASENAME)/$$f"; \ + done + @echo "Exported $(EXPORTDIR)/flashrom-$(RELEASENAME)/" tarball: export @tar cjf $(EXPORTDIR)/flashrom-$(RELEASENAME).tar.bz2 -C $(EXPORTDIR)/ $(TAROPTIONS) flashrom-$(RELEASENAME)/ diff --git a/flashrom.c b/flashrom.c index 25e53f2..1a43303 100644 --- a/flashrom.c +++ b/flashrom.c @@ -1801,7 +1801,7 @@ void print_buildinfo(void) void print_version(void) { - msg_ginfo("flashrom v%s", flashrom_version); + msg_ginfo("flashrom %s", flashrom_version); print_sysinfo(); msg_ginfo("\n"); } diff --git a/util/getrevision.sh b/util/getrevision.sh index 1012058..1240e95 100755 --- a/util/getrevision.sh +++ b/util/getrevision.sh @@ -5,7 +5,7 @@ # Copyright (C) 2005 coresystems GmbH <stepan(a)coresystems.de> # Copyright (C) 2009,2010 Carl-Daniel Hailfinger # Copyright (C) 2010 Chromium OS Authors -# Copyright (C) 2013 Stefan Tauner +# Copyright (C) 2013-2016 Stefan Tauner # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -30,31 +30,73 @@ export LC_ALL=C # nor local times or dates export TZ=UTC0 -# Helper functions -# First argument is the path to inspect (usually optional; w/o it the whole repository will be considered) -svn_has_local_changes() { - svn status "$1" | egrep '^ *[ADMR] *' >/dev/null +# List of important upstream branches... +upstream_branches="stable staging" +upstream_url="https://flashrom.org/git/flashrom.git" +upstream_patterns="github\.com.flashrom/flashrom\.git|flashrom\.org.git/flashrom\.git" + +upcache_prefix="refs/flashrom_org/" +# Generate upcache_refs +for b in $upstream_branches ; do + upcache_refs="$upcache_refs ${upcache_prefix}$b" +done + +# We need to update our upstream information sometimes so that we can create detailed version information. +# To that end the code below fetches parts of the upstream repository via https. +# This takes about one second or less under normal circumstances. +# +# It can be called manually, but is usually called via +# - the Makefile (implicitly via revision()) when there is no upstream information in any existing remote +forced_update() { + local rev_remote_refs + for ref in $upcache_refs ; do + rev_remote_refs="$rev_remote_refs +${ref##*/}:$ref" + done + git fetch -q "$upstream_url" --tags $rev_remote_refs && echo "Success." } +update() { + offline=$(git config flashrom.offline-builds 2>/dev/null) + if [ -z "$offline" ]; then + echo "To produce useful version information the build process needs access to the commit +history from an upstream repository. If no git remote is pointing to one we +can store the necessary information out of sight and update it on every build. +To enable this functionality and fetch the upstream commits from $upstream_url +please execute 'git config flashrom.offline-builds false' or add one of the +upstream repositories as git remote to rely on that information. +However, if you want to work completely offline and generate meaningless version +strings then disable it with 'git config flashrom.offline-builds true' +You can force updating the local commit cache with '$0 --forced-update'">&2 + return 1 + elif [ "x$offline" = "xfalse" ]; then + echo "Fetching commit history from upstream repository $upstream_url +To disable any network activity execute 'git config flashrom.offline-builds true'.">&2 + forced_update >/dev/null + else + echo "Fetching commit history from upstream is disabled - version strings might be misleading. +To ensure proper version strings and allow network access run 'git config flashrom.offline-builds false'.">&2 + fi + return 0 +} + +# Helper functions +# First argument is the path to inspect (usually optional; w/o it the whole repository will be considered) git_has_local_changes() { git update-index -q --refresh >/dev/null ! git diff-index --quiet HEAD -- "$1" } git_last_commit() { + # git rev-parse --short HEAD would suffice if repository as a whole is of interest (no $1) git log --pretty=format:"%h" -1 -- "$1" } -svn_is_file_tracked() { - svn info "$1" >/dev/null 2>&1 -} - git_is_file_tracked() { git ls-files --error-unmatch -- "$1" >/dev/null 2>&1 } is_file_tracked() { - svn_is_file_tracked "$1" || git_is_file_tracked "$1" + git_is_file_tracked "$1" } # Tries to find a remote source for the changes committed locally. @@ -89,13 +131,7 @@ git_url() { scm_url() { local url= - # for a primitive VCS like subversion finding the URL is easy: there is only one upstream host - if svn_is_file_tracked "$1" ; then - url="$(svn info "$1" 2>/dev/null | - grep URL: | - sed 's/.*URL:[[:blank:]]*//;s/:\/\/.*@/:\/\//' | - grep ^.)" - elif git_is_file_tracked "$1" ; then + if git_is_file_tracked "$1" ; then url="$(git_url "$1")" else return ${EXIT_FAILURE} @@ -116,29 +152,7 @@ timestamp() { # freebsd date [-jnu] [-d dst] [-r seconds] [-f fmt date | [[[[[cc]yy]mm]dd]HH]MM[.ss]] [+format] [...] # dragonflybsd date [-jnu] [-d dst] [-r seconds] [-f fmt date | [[[[[cc]yy]mm]dd]HH]MM[.ss]] [+format] [...] # openbsd date [-aju] [-d dst] [-r seconds] [+format] [[[[[[cc]yy]mm]dd]HH]MM[.SS]] [...] - if svn_is_file_tracked "$2" ; then - if svn_has_local_changes "$2"; then - t=$(date -u "$1") - else - # No local changes, get date of the last log record. Subversion provides that in - # ISO 8601 format when using the --xml switch. The sed call extracts that ignoring any - # fractional parts started by a comma or a dot. - local last_commit_date="$(svn info --xml "$2"| \ - sed -n -e 's/<date>$[^,\.]*$$[\.,].*$*Z<\/date>/\1Z/p')" - - case $(uname) in - # Most BSD dates do not support parsing date values from user input with -d but all of - # them support parsing the syntax with [[[[[[cc]yy]mm]dd]HH]MM[.ss]]. We have to - # transform the ISO8601 date first though. - NetBSD|OpenBSD|DragonFly|FreeBSD) - last_commit_date="$(echo ${last_commit_date} | \ - sed -n -e 's/$....$-$..$-$..$T$..$:$..$:$..$Z/\1\2\3\4\5\.\6/p')" - t=$(date -u -j "${last_commit_date}" "$1" 2>/dev/null);; - *) - t=$(date -u -d "${last_commit_date}" "$1" 2>/dev/null);; - esac - fi - elif git_is_file_tracked "$2" ; then + if git_is_file_tracked "$2" ; then # are there local changes? if git_has_local_changes "$2" ; then t=$(date -u "${1}") @@ -163,55 +177,102 @@ timestamp() { echo "${t}" } -# Retrieve local SCM revision info. This is useful if we're working in a different SCM than upstream and/or -# have local changes. -local_revision() { - local r= - - if svn_is_file_tracked "$1" ; then - r=$(svn_has_local_changes "$1" && echo "dirty") - elif git_is_file_tracked "$1" ; then - r=$(git_last_commit "$1") - - local svn_base=$(git log --grep=git-svn-id -1 --format='%h') - if [ "$svn_base" != "" ] ; then - local diff_to_svn=$(git rev-list --count ${svn_base}..${r}) - if [ "$diff_to_svn" -gt 0 ] ; then - r="$r-$diff_to_svn" - fi - fi +tag() { + local t= - if git_has_local_changes "$1" ; then - r="$r-dirty" + if git_is_file_tracked "$1" ; then + local sha=$(git_last_commit "$1") + t=$(git describe --abbrev=0 "$sha") + fi + if [ -z "$t" ]; then + t="unknown" # default to unknown + fi + echo "${t}" +} + +find_upremote() { + # Try to find upstream's remote name + for remote in $(git remote) ; do + local url=$(git ls-remote --get-url $remote) + if echo "$url" | grep -q -E "$upstream_patterns" ; then + echo "$remote" + return fi + done +} + +revision() { + local sha=$(git_last_commit "$1" 2>/dev/null) + # No git no fun + if [ -z "$sha" ]; then + echo "unknown" + return + fi + + local r="$sha" + if git_has_local_changes "$1" ; then + r="$r-dirty" + fi + + # sha + possibly dirty info is not exactly verbose, therefore the code below tries to use tags and + # branches from the upstream repos to derive a more previse version string. + # To that end we try to use the existing remotes first. + # If the upstream repos (and its mirrors) are not available as remotes, use a shadow copy instead. + + local up_refs + local up_remote=$(find_upremote) + if [ -n "$up_remote" ]; then + for b in $upstream_branches ; do + up_refs="$up_refs ${up_remote}/${b}" + done else - return ${EXIT_FAILURE} + update || { echo "offline" ; return ; } + up_refs=$upcache_refs fi - echo "${r}" -} + # Find nearest commit contained in this branch that is also in any of the up_refs, i.e. the branch point + # of the current branch. This might be the latest commit if it's in any of the upstream branches. + local merge_point=$(git merge-base ${sha} ${up_refs}) + local upstream_branch + if [ -z "$merge_point" ]; then + echo "$sha" + return + fi -# Get the upstream flashrom revision stored in SVN metadata. -upstream_revision() { - local r= - - if svn_is_file_tracked "$1" ; then - r=$(svn info "$1" 2>/dev/null | \ - grep "Last Changed Rev:" | \ - sed -e "s/^Last Changed Rev: *//" -e "s/$[0-9]*$.*/r\1/" | \ - grep "r[0-9]") - elif git_is_file_tracked "$1" ; then - # If this is a "native" git-svn clone we could use git svn log: - # git svn log --oneline -1 | sed 's/^r//;s/[[:blank:]].*//' or even git svn find-rev - # but it is easier to just grep for the git-svn-id unconditionally - r=$(git log --grep=git-svn-id -1 -- "$1" | \ - grep git-svn-id | \ - sed 's/.*@/r/;s/[[:blank:]].*//') + # If the current commit is reachable from any remote branch, append the branch name and its + # distance to the nearest earlier tag to that tag name itself (tag-distance-branch). + # If multiple branches are reachable then we use the newest one (by commit date). + # If none is reachable we use the nearest tag and ? for distances and remote branch name. + + local cnt_upstream_branch2sha=$(git rev-list --count "${merge_point}..${sha}" 2>/dev/null) + + local lasttag=$(git describe --abbrev=0 "$merge_point" 2>/dev/null) + if [ -z "$lasttag" ]; then + echo "Could not find tag reachable from merge point!">&2 + echo "$sha" + return fi - if [ -z "$r" ]; then - r="unknown" # default to unknown + local cnt_tag2upstream_branch + for ref in $up_refs ; do + if git merge-base --is-ancestor ${merge_point} ${ref}; then + upstream_branch=${ref##*/} # remove everything till last / + cnt_tag2upstream_branch=$(git rev-list --count "${lasttag}..${merge_point}" 2>/dev/null) + break + fi + done + + if [ "$cnt_upstream_branch2sha" -gt 0 ]; then + r="$cnt_upstream_branch2sha-$r" + fi + if [ "$cnt_tag2upstream_branch" -gt 0 ]; then + if [ -n "$upstream_branch" ]; then + r="$upstream_branch-$r" + fi + r="$cnt_tag2upstream_branch-$r" fi + r="$lasttag-$r" + echo "${r}" } @@ -228,16 +289,20 @@ Commands this message -c or --check test if path is under version control at all - -l or --local - local revision information including an indicator for uncommitted changes - -u or --upstream - upstream revision - -U or --url + -T or --tag + returns the name of the last release/tag + -r or --revision + return unique revision information including the last tag and an indicator for uncommitted changes + -u or --url URL associated with the latest commit -d or --date date of most recent modification -t or --timestamp timestamp of most recent modification + -U or --update + update local shadow copy of upstream commits if need be and offline builds are not enforced + --forced-update + force updating the local shadow copy of upstream commits " return } @@ -260,15 +325,15 @@ main() { -h|--help) action=show_help; shift;; - -l|--local) + -T|--tag) check_action $1 - action=local_revision + action=tag shift;; - -u|--upstream) + -r|--revision) check_action $1 - action=upstream_revision + action=revision shift;; - -U|--url) + -u|--url) check_action $1 action=scm_url shift;; @@ -280,9 +345,17 @@ main() { check_action $1 action="timestamp +%Y-%m-%dT%H:%M:%SZ" # There is only one valid time format! ISO 8601 shift;; + -U|--update) + check_action $1 + action=update + shift;; + --forced-update) + check_action $1 + action=forced_update + shift;; -c|--check) - check_action=$1 - action="is_tracked" + check_action $1 + action=is_tracked shift;; -*) show_help; diff --git a/util/git-hooks/applypatch-msg b/util/git-hooks/applypatch-msg new file mode 100755 index 0000000..32ff6c7 --- /dev/null +++ b/util/git-hooks/applypatch-msg @@ -0,0 +1,15 @@ +#!/bin/sh +# +# A hook script to check the commit log message taken by +# applypatch from an e-mail message (via git-am). +# We simply do the same as for other commit messages +# +# The hook should exit with non-zero status after issuing an +# appropriate message if it wants to stop the commit. The hook is +# allowed to edit the commit message file. +# + +. git-sh-setup +test -x "$GIT_DIR/hooks/commit-msg" && + exec "$GIT_DIR/hooks/commit-msg" ${1+"$@"} +: diff --git a/util/git-hooks/commit-msg b/util/git-hooks/commit-msg new file mode 100755 index 0000000..710fe78 --- /dev/null +++ b/util/git-hooks/commit-msg @@ -0,0 +1,15 @@ +#!/bin/sh +# +# A hook script to check the commit log message. +# Called by "git commit" with one argument, the name of the file +# that has the commit message. The hook should exit with non-zero +# status after issuing an appropriate message if it wants to stop the +# commit. The hook is allowed to edit the commit message file. +# + +# Catches duplicate Signed-off-by lines. +test "" = "$(grep '^Signed-off-by: ' "$1" | + sort | uniq -c | sed -e '/^[ ]*1[ ]/d')" || { + echo "Duplicate Signed-off-by lines." >&2 + exit 1 +} diff --git a/util/git-hooks/install.sh b/util/git-hooks/install.sh new file mode 100755 index 0000000..84151d0 --- /dev/null +++ b/util/git-hooks/install.sh @@ -0,0 +1,17 @@ +#!/bin/sh -e + +root=$(git rev-parse --show-cdup 2>/dev/null) || ( echo "Not under git control. Cannot install git hooks." >&2 ; exit 0 ) +dst="${root}"$(git rev-parse --git-path hooks/) +src=util/git-hooks/ # relative to root +hooks=$(cd "${root}${src}" && git ls-files -c | grep -Ev 'install.sh|wrapper.sh') + +for h in $hooks; do + # Test if hook is not already installed, i.e. doesn't point at the wrapper + if [ ! "${dst}$h" -ef "${root}${src}wrapper.sh" ]; then + # preserve custom hooks if any + if [ -e "${dst}$h" ]; then + mv "${dst}$h" "${dst}$h.local" + fi + ln -s "../../${src}wrapper.sh" "${dst}$h" + fi +done diff --git a/util/git-hooks/pre-applypatch b/util/git-hooks/pre-applypatch new file mode 100755 index 0000000..2ed28f7 --- /dev/null +++ b/util/git-hooks/pre-applypatch @@ -0,0 +1,12 @@ +#!/bin/sh +# +# An example hook script to verify what is about to be committed +# by applypatch from an e-mail message. +# +# The hook should exit with non-zero status after issuing an +# appropriate message if it wants to stop the commit. + +. git-sh-setup +test -x "$GIT_DIR/hooks/pre-commit" && + exec "$GIT_DIR/hooks/pre-commit" ${1+"$@"} +: diff --git a/util/git-hooks/pre-commit b/util/git-hooks/pre-commit new file mode 100755 index 0000000..dbccb9e --- /dev/null +++ b/util/git-hooks/pre-commit @@ -0,0 +1,9 @@ +#!/bin/sh +# +# A hook script to verify what is about to be committed. +# Called by "git commit" with no arguments. The hook should +# exit with non-zero status after issuing an appropriate message if +# it wants to stop the commit. + +# Check for whitespace errors +git diff-index --check --cached HEAD -- || exit 1 diff --git a/util/git-hooks/pre-push b/util/git-hooks/pre-push new file mode 100755 index 0000000..3fab8c4 --- /dev/null +++ b/util/git-hooks/pre-push @@ -0,0 +1,74 @@ +#!/bin/sh + +# A hook script to verify what is about to be pushed. Called by "git +# push" after it has checked the remote status, but before anything has been +# pushed. If this script exits with a non-zero status nothing will be pushed. +# +# This hook is called with the following parameters: +# +# $1 -- Name of the remote to which the push is being done +# $2 -- URL to which the push is being done +# +# If pushing without using a named remote those arguments will be equal. +# +# Information about the commits which are being pushed is supplied as lines to +# the standard input in the form: +# +# <local ref> <local sha1> <remote ref> <remote sha1> + +remote="$1" +url="$2" + +zero=0000000000000000000000000000000000000000 + +upstream_pattern="flashrom.org.*git/flashrom.git" +precious_branches=( stable staging ) + +# Only care about the upstream repository +if echo "$url" | grep -q -v -E "$upstream_pattern" ; then + exit 0 +fi + +while read local_ref local_sha remote_ref remote_sha ; do + if [ "$remote_ref" != "refs/heads/staging" -a "$remote_ref" != "refs/heads/stable" ]; then + echo "Feature branches not allowed ($remote_ref)." >&2 + exit 1 + fi + + if [ "$local_sha" = $zero ]; then + echo "Deletion of branches is prohibited." >&2 + exit 1 + else + if [ "$remote_sha" = "$zero" ]; then + echo "No new branches allowed." >&2 + exit 1 + else + range="$remote_sha..$local_sha" + fi + + # Check for Signed-off-by and Acked-by + commit=$(git rev-list -n 1 --all-match --invert-grep -E \ + --grep '^Signed-off-by: .+ <.+@.+\..+>$' --grep '^Acked-by: .+ <.+@.+\..+>$' "$range") + if [ -n "$commit" ]; then + echo "No Signoff or Ack found in commit $local_sha in $local_ref, not pushing." >&2 + exit 1 + fi + + # Make _really_ sure we do not rewrite precious history + for lbranch in "${precious_branches[@]}"; do + if [ "$remote_ref" = "refs/heads/$lbranch" ]; then + nonreachable=$(git rev-list $remote_sha ^$local_sha) + if [ -n "$nonreachable" ]; then + echo "Only fast-forward pushes are allowed on $lbranch." >&2 + echo "$nonreachable is not included in $remote_sha while pusing to $remote_ref" >&2 + exit 1 + fi + fi + done + + # FIXME: check commit log format (subject without full stop at the end etc). + # FIXME: do buildbot checks if authorized? + fi +done + +exit 0 diff --git a/util/git-hooks/wrapper.sh b/util/git-hooks/wrapper.sh new file mode 100755 index 0000000..3fc3e05 --- /dev/null +++ b/util/git-hooks/wrapper.sh @@ -0,0 +1,10 @@ +#!/bin/sh + +if [ -x $0.local ]; then + $0.local "$@" || exit $? +fi + +hook=$(git rev-parse --show-toplevel)"/util/git-hooks/"$(basename $0) +if [ -x $hook ]; then + $hook "$@" || exit $? +fi -- Kind regards, Stefan Tauner

2 2

Re: [flashrom] How to only flash BIOS region on braswell.
by Nico Huber 22 Nov '16

22 Nov '16

Hi Sampson, On 21.11.2016 04:33, Sampson Lee wrote: > I add a few point: > > I use flshrom version:0.99. > I try command "--layout" to read my rom file,but it show error message > "error parsing layout file". well, it means what it says, flashrom can't understand the file you gave to the `--layout` parameter. Please send us your layout file and a full log of the failing command (e.g. by adding `-o logfile.txt` to the flashrom command line). Regards, Nico

1 0

Re: [flashrom] How to only flash BIOS region on braswell.
by Sampson Lee 21 Nov '16

21 Nov '16

I add a few point: I use flshrom version:0.99. I try command "--layout" to read my rom file,but it show error message "error parsing layout file". So I can not use command "--image". Anybody have any idea?

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom