- flashrom - mail.coreboot.org

USB programeron EBay
by Sjoer van der Ploeg 29 Apr '13

29 Apr '13

Dear FlashRom, There are a few USB programmers on EBay like: http://item.mobileweb.ebay.com/viewitem?itemId=150950459618 It looks like a modified Rayer design to me, but I'm not 100% sure. Did anyone try one of these with FlashRom? Yours, Sjoer van der Ploeg

1 0

Re: [flashrom] Multichip support for a dediprog SF100
by Stefan Tauner 29 Apr '13

29 Apr '13

On Sun, 28 Apr 2013 19:38:44 -0400 Joshua Zarr <joshuazarr(a)gmail.com> wrote: > I was going to ask you about that. What sort of tool would you need to do > that? Is there a program I can run under windows to do the trace or would i > need an external USB bus analyzer? There are several options to do this, but I have not tried a single one. Some of them look quite promising: - use linux as a host system for a virtual windows machine, forward USB traffic and capture it with e.g. wireshark (and the usbmon driver) on the host machine. - the latest development release of wireshark seems to support USB sniffing on windows natively (http://desowin.org/usbpcap/). - an older alternative named UsbSnoop that should work on newer windows versions too (despite all the warnings on its website): http://www.pcausa.com/Utilities/UsbSnoop/ All of those produce dump logs that are open and for which there exist a good number of tools to analyse them. I have no idea what was used previously for initial dediprog support... -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] Multichip support for a dediprog SF100
by Stefan Tauner 29 Apr '13

29 Apr '13

On Tue, 23 Apr 2013 10:16:27 -0600 Marc Jones <marcj303(a)gmail.com> wrote: > On Tue, Apr 23, 2013 at 9:21 AM, Joshua Zarr <joshuazarr(a)gmail.com> wrote: > > Hi All, > > > > I am using a dediprog SF100 to program the two flash chips (AT25DF321) on an > > intel Stargo CRB. Does flashrom support programming each chip individually? > > I ran into the same thing. I think that the flashrom dediprog support > needs a flag to switch the chipselect. > If anybody could supply us with traces of the USB traffic generated when another CS is used, we could probably add support for it. I dont know anything about the protocol or the vendor application but I guess it would be rather easy to find the interesting bits by creating and comparing dumps of two executions (e.g. the probing for a chip if that's supported) that differ only in the selected connection. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

Re: [flashrom] AMD - SP5100 - take SPI ownership (1/2)
by Martin Roth 26 Apr '13

26 Apr '13

Hi Wei, It's probably the xHCI controller code running. I'm not sure when it's actually active though - If you have any USB3 devices plugged into the system, you might want to remove those and try flashing again. It *MIGHT* be that simple, but we're probably not that lucky. If that *DOES* work, please let us know - I'd be very interested in knowing that. I didn't see what BIOS rom you were trying to flash - If it's an IBV BIOS, you could try rebooting and disabling USB3 in the setup engine. I'd expect that that would take care of the problem. Then we just need to figure out a way to disable this without disrupting the system at runtime... Hope this helps. Martin On 04/26/2013 01:04 PM, Wei Hu wrote: > Hi Rudolf, > > I wanted to follow up with an issue on my AMD chipset. Here is my > original question: > http://www.flashrom.org/pipermail/flashrom/2013-April/010924.html. > Basically the IMC bit in the LPC PCI config register at offset 0x40 is > not set, but flashrom still finds something else is accessing the > flash chip and decides to bail out. > > I was led to your patch so I gave it a try. I removed the IMC bit > check in your patch but still the IMC seems to be indeed inactive, > since mbox_port read 0. Also I noticed you wrote 0x5a to enter conf > mode and 0xa5 to exit conf mode. According to the datasheet 0x55 and > 0xaa should be written instead. I made that change but it didn't help > either. > > Can someone think of any other possible things that's accessing the chip? > > Thanks, > Wei > > _______________________________________________ > flashrom mailing list > flashrom(a)flashrom.org > http://www.flashrom.org/mailman/listinfo/flashrom >

2 1

W836xx: Asus M4A785T-M Running Coreboot: flashrom -V
by Denis 'GNUtoo' Carikli 26 Apr '13

26 Apr '13

Hi, Since flashrom(from last revision: 1671) produced a warning, I was told to report it: [gnutoo@m4a785t-m flashrom]$ sudo ./flashrom -V -pinternal flashrom v0.9.6.1-r1671 on Linux 3.8.8-1-LIBRE-PAE (i686) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.10, GCC 4.8.0 20130411 (prerelease), little endian Command line (2 args): ./flashrom -V -pinternal Calibrating delay loop... OS timer resolution is 1 usecs, 325M loops per second, delay more than 10% too short (got 88% of expected delay), recalculating... 325M loops per second, 10 myus = 14 us, 100 myus = 99 us, 1000 myus = 1002 us, 10000 myus = 10051 us, 4 myus = 11 us, OK. Initializing internal programmer Found candidate at: 00000500-00000510 Found coreboot table at 0x00000500. Found candidate at: 00000000-00000234 Found coreboot table at 0x00000000. coreboot table found at 0xaffee000. coreboot header(24) checksum: f4ee table(564) checksum: 7721 entries: 14 Vendor ID: ASUS, part ID: M4A785T-M DMI string system-manufacturer: "ASUS" DMI string system-product-name: "M4A785T-M" DMI string system-version: "1.0" DMI string baseboard-manufacturer: "" DMI string baseboard-product-name: "" DMI string baseboard-version: "" DMI string chassis-type: "Desktop" W836xx enter config mode worked or we were already in config mode. W836xx leave config mode had no effect. Active config mode, unknown reg 0x20 ID: 12. Please send the output of "flashrom -V" to flashrom(a)flashrom.org with W836xx: your board name: flashrom -V as the subject to help us finish support for your Super I/O. Thanks. W836xx enter config mode worked or we were already in config mode. W836xx leave config mode had no effect. Active config mode, unknown reg 0x20 ID: 12. Please send the output of "flashrom -V" to flashrom(a)flashrom.org with W836xx: your board name: flashrom -V as the subject to help us finish support for your Super I/O. Thanks. Found ITE Super I/O, ID 0x8712 on port 0x2e Found chipset "AMD SB7x0/SB8x0/SB9x0" with PCI ID 1002:439d. Enabling flash write... SPI base address is at 0xd9309600 AltSpiCSEnable=0, SpiRomEnable=1, AbortEnable=0 PrefetchEnSPIFromIMC=0, PrefetchEnSPIFromHost=1, SpiOpEnInLpcMode=0 SpiArbEnable=1, SpiAccessMacRomEn=1, SpiHostAccessRomEn=1, ArbWaitCount=4, SpiBridgeDisable=1, DropOneClkOnRd=0 NormSpeed is 16.5 MHz GPIO11 used for SPI_DO GPIO12 used for SPI_DI GPIO31 used for SPI_HOLD GPIO32 used for SPI_CS GPIO47 used for SPI_CLK SB700 IMC is not active. ROM strap override is not active OK. Super I/O ID 0x8712 is not on the list of flash capable controllers. The following protocols are supported: LPC, FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25F512, 64 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F512A, 64 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25F1024(A), 128 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F2048, 256 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F4096, 512 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1605D/MX25L1608D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3206E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L6405(D), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L6445E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L12805(D), 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV512(A), 64 kB: probe_spi_res3: id1 0x1313, id2 0x13 Probing for PMC Pm25LV010, 128 kB: probe_spi_res3: id1 0x1313, id2 0x13 Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25LF080(A), 1024 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Found Winbond flash chip "W25X80" (1024 kB, SPI) at physical address 0xfff00000. Chip status register is 0x00. Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Unknown SFDP-capable chip, 0 kB: No SFDP signature found. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0x5c, id2 0x61, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x20, id2 0xed, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x5c, id2 0x61, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x4c, id2 0x41, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x20, id2 0xed, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x5c, id2 0x61, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x4c, id2 0x41, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x20, id2 0xed, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x0f, id2 0xbb, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x5c, id2 0x61, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x5c, id2 0x61, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x4c, id2 0x41, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x4c, id2 0x41, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0x20, id2 0xed, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0x20, id2 0xed, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0x5c, id2 0x61, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0x5c, id2 0x61, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0x4c, id2 0x41, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x5c, id2 0x61, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x5c, id2 0x61, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x4c, id2 0x41, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x4c, id2 0x41, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x20, id2 0xed, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x5c, id2 0x61, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x4c, id2 0x41, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0x5c, id2 0x61, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0x5c, id2 0x61, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0x5c, id2 0x61, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x5c, id2 0x61, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x5c, id2 0x61, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x5c, id2 0x61, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0x4c, id2 0x41, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0x20, id2 0xed, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x20, id2 0xed, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x4c, id2 0x41, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x5c, id2 0x61, id1 parity violation, id1 is normal flash content, id2 is normal flash content Found Winbond flash chip "W25X80" (1024 kB, SPI). No operations were specified. And: [root@m4a785t-m superiotool]# ./superiotool -d superiotool r4.0-4078-g69ea2ab Found ITE IT8712F (id=0x8712, rev=0x8) at 0x2e Register dump: idx 20 21 22 23 24 2b val 87 12 08 00 00 00 def 87 12 08 00 00 00 LDN 0x00 (Floppy) idx 30 60 61 70 74 f0 f1 val 00 03 f0 06 02 00 00 def 00 03 f0 06 02 00 00 LDN 0x01 (COM1) idx 30 60 61 70 f0 f1 f2 f3 val 01 03 f8 04 00 50 00 7f def 00 03 f8 04 00 50 00 7f LDN 0x02 (COM2) idx 30 60 61 70 f0 f1 f2 f3 val 00 02 f8 03 00 50 00 7f def 00 02 f8 03 00 50 00 7f LDN 0x03 (Parallel port) idx 30 60 61 62 63 70 74 f0 val 00 03 78 07 78 07 04 03 def 00 03 78 07 78 07 03 03 LDN 0x04 (Environment controller) idx 30 60 61 62 63 70 f0 f1 f2 f3 f4 f5 f6 val 00 02 90 02 30 09 80 00 00 00 00 00 ff def 00 02 90 02 30 09 00 00 00 00 00 NA NA LDN 0x05 (Keyboard) idx 30 60 61 62 63 70 71 f0 val 01 00 60 00 64 01 02 48 def 01 00 60 00 64 01 02 08 LDN 0x06 (Mouse) idx 30 70 71 f0 val 01 0c 02 00 def 00 0c 02 00 LDN 0x07 (GPIO) idx 25 26 27 28 29 2a 2c 60 61 62 63 64 65 70 71 72 73 74 b0 b1 b2 b3 b4 b5 b8 b9 ba bb bc bd c0 c1 c2 c3 c4 c8 c9 ca cb cc e0 e1 e2 e3 e4 f0 f1 f2 f3 f4 f5 f6 f7 f8 f9 fa fb fc fd val 01 00 00 40 00 00 1f 00 00 00 00 00 00 00 01 00 38 00 00 00 00 00 00 00 20 00 00 00 00 00 01 00 00 40 00 01 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 def 01 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 40 00 01 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 NA 00 LDN 0x08 (MIDI port) idx 30 60 61 70 f0 val 00 03 00 0a 00 def 00 03 00 0a 00 LDN 0x09 (Game port) idx 30 60 61 val 00 02 01 def 00 02 01 LDN 0x0a (Consumer IR) idx 30 60 61 70 f0 val 00 03 10 0b 06 def 00 03 10 0b 00 Denis.

1 0

Re: [flashrom] AMD - SP5100 - take SPI ownership (1/2)
by Wei Hu 26 Apr '13

26 Apr '13

Hi Rudolf, I wanted to follow up with an issue on my AMD chipset. Here is my original question: http://www.flashrom.org/pipermail/flashrom/2013-April/010924.html. Basically the IMC bit in the LPC PCI config register at offset 0x40 is not set, but flashrom still finds something else is accessing the flash chip and decides to bail out. I was led to your patch so I gave it a try. I removed the IMC bit check in your patch but still the IMC seems to be indeed inactive, since mbox_port read 0. Also I noticed you wrote 0x5a to enter conf mode and 0xa5 to exit conf mode. According to the datasheet 0x55 and 0xaa should be written instead. I made that change but it didn't help either. Can someone think of any other possible things that's accessing the chip? Thanks, Wei

1 0

Verbose Log
by Adam F. 26 Apr '13

26 Apr '13

Calibrating delay loop... OS timer resolution is 1 usecs, 4799M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1000 us, 10000 myus = 10001 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "To Be Filled By O.E.M." DMI string system-product-name: "To Be Filled By O.E.M." DMI string system-version: "To Be Filled By O.E.M." DMI string baseboard-manufacturer: "ASRock" DMI string baseboard-product-name: "Z68 Extreme4 Gen3" DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found chipset "Intel Z68" with PCI ID 8086:1c44. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode enabled 0xff600000/0xff200000 FWH decode enabled 0xff500000/0xff100000 FWH decode enabled 0xff400000/0xff000000 FWH decode enabled Maximum FWH chip size: 0x100000 bytes BIOS_CNTL = 0x09: BIOS Lock Enable: disabled, BIOS Write Enable: enabled Root Complex Register Block address = 0xfed1c000 GCS = 0xc65: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0xe008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 Warning: SPI Configuration Lockdown activated. Reading OPCODES... done 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x50: 0x00000a0b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b 0x54: 0x000f0000 FREG0: Warning: Flash Descriptor region (0x00000000-0x0000ffff) is read-only. 0x58: 0x07ff0400 FREG1: BIOS region (0x00400000-0x007fffff) is read-write. 0x5C: 0x03ff0010 FREG2: Warning: Management Engine region (0x00010000-0x003fffff) is locked. Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on http://flashrom.org/Supported_hardware#Supported_mainboards yet. Writes have been disabled for safety reasons. You can enforce write support with the ich_spi_force programmer option, but you will most likely harm your hardware! If you force flashrom you will get no support if something breaks. On a few mainboards it is possible to enable write access by setting a jumper (see its documentation or the board itself). 0x90: 0xc4 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf94240 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=4, DBC=2, SME=0, SCF=1 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00802005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) SPI Read Configuration: prefetching enabled, caching enabled, OK. The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25F512, 64 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F512A, 64 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25F1024(A), 128 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F2048, 256 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F4096, 512 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1605D/MX25L1608D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3206E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L6405(D), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L6445E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L12805(D), 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV512(A), 64 kB: Invalid OPCODE 0xab, will not execute. Probing for PMC Pm25LV010, 128 kB: Invalid OPCODE 0xab, will not execute. Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25LF080(A), 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25VF010, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Found Winbond flash chip "W25X80" (1024 kB, SPI) at physical address 0xfff00000. Chip status register is 0x00. Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Unknown SFDP-capable chip, 0 kB: Invalid OPCODE 0x5a, will not execute. Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Found Winbond flash chip "W25X80" (1024 kB, SPI). No operations were specified. Restoring MMIO space at 0x7f55f3fd08a0 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

Something else is accessing the flash chip, what are the usual suspects?
by Wei Hu 26 Apr '13

26 Apr '13

Hello, I'm running Ubuntu 12.10 and the latest flashrom from subversion. I'm getting this warning and would like to know how to find the driver/program that's accessing the flash chip? Thanks! # ./flashrom --programmer internal -r /tmp/k -VVV flashrom v0.9.6.1-r1671 on Linux 3.5.0-25-generic (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.9, GCC 4.7.2, little endian ... Found chipset "AMD Hudson" with PCI ID 1022:780e. Enabling flash write... SPI base address is at 0xfec10000 AltSpiCSEnable=0, SpiRomEnable=1, AbortEnable=0 PrefetchEnSPIFromIMC=0, PrefetchEnSPIFromHost=1, SpiOpEnInLpcMode=1 SpiArbEnable=1, SpiAccessMacRomEn=1, SpiHostAccessRomEn=1, ArbWaitCount=7, SpiBridgeDisable=1, DropOneClkOnRd=0 NormSpeed is Reserved MHz GPIO11 used for SPI_DO GPIO12 used for SPI_DI GPIO31 used for SPI_HOLD GPIO32 used for SPI_CS GPIO47 used for SPI_CLK SB700 IMC is not active. ROM strap override is not active OK. The following protocols are supported: LPC, FWH, SPI. Probing for AMIC A25L05PT, 64 kB: sb600_spi_send_command, cmd=9f, writecnt=0, readcnt=4 Writing: SB600 FIFO pointer is 0, wanted 0 Executing: SB600 FIFO pointer corruption! Pointer is 3, wanted 4 Something else is accessing the flash chip and causes random corruption. Please stop all applications and drivers and IPMI which access the flash chip.

1 0

flashrom schedule 2013 (includes my GSoC proposal mostly :)
by Stefan Tauner 24 Apr '13

24 Apr '13

If mentors agree I would rather not set all project details in stone. My previous project of unlocking the ME had a very distinct goal but the outcome was something completely different but probably more useful to the project than if I would have succeeded IMHO :) Also, progress on single points might be delayed due to missing feedback or reviewing. Main coding period is from 2013-06-17 till 2013-09-23. Until then I would like to tag another stable release (0.9.6 was released in August 2012) and merge the larger chunks of the patch pile. While this might create intermittent problems without proper review it will guarantee that there wont be too many conflicts with the code to come and it will merge stuff that should have been merged way earlier... If there will be others working on flashrom (panic room, serialice or even "native" flashrom project(s)), this is even more important. Here is the list of the most important things I want to merge shortly after tagging the next stable: mine: - Layout patches - Automatic unmapping and rounding of physmaps - Internal DMI decoder others: - any makefile-related changes and patches that are waiting on makefile changes only if possible (e.g. libusb stuff) - rayer_spi/lpt_spi (if they do not make it into the stable) Please suggest other stuff that you think is ready (I probably forgot about some)! My goals for the actual coding season are (in planned chronological order): - integrate Nico's libflashrom patches - refine and merge check_trans patch(es). They will be very useful/required for the following goals to be implemented (safely). - add support for multiple write operations * similar to erasers but maybe using distinct enter/exit function pointers - add support for multiple read operations (like writes), allowing to: - add support for 4B-addressing (needed for chips >= 16MB) I have received sample chips from Spansion and Macronix (S25FL256, S25FL512, MX25L25635), but I need to adapt my programmer to work with SOIC16 packages. - improve SPI probing. Something long overdue IMHO. There are less than a dozen ways to identify SPI flash chips. Nevertheless flashrom uses no more than 3 and even those in a rather awkward way. * Determine the best way to allow for multiple probing results/matches per chip and/or how to separate SPI probing from the rest. Possibly split struct flashchip into a generic part and a more specific Non-SPI/SPI union. * Design a method to rank the received results and match the chip- * Implement probing accordingly. * Add more/generify probing methods (EDI). * Mark chips still not distinguishable (on permissive programmers/safely) as evil twins. Somewhere inbetween I will probably have to create a unified and distinct type for on-chip addresses, and possibly address ranges too (and functions to operate on those as if they were sets (union, intersection, difference)). If there is still time I could do other infrastructure improvements like automatic recovery if something fails etc. or reduce my TODO list (which is essentially the same thing). If there is a lot more time I would work on the locking interface that and/or improvements regarding the "Internal programmer improvements for complex systems" project. If everything works out as planned I would like to release another stable (or at least release candidate) a few months after the big changes have been merged, certainly before 2014. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

3 2

flashrom issues on our X86 blades.
by Andrew Zhao 24 Apr '13

24 Apr '13

Hi flashrom experts: When I run "flashrom" on our X86 blades, there are some WARNING info , I am very appreciated if you can take a look Into it and give some comments. Attachments are the output when I run the commands with "-V" option. When I run "flashrom -p internal" , the output is: ================================== root@ATCA-46XX@0-0-5:~# flashrom -p internal flashrom v0.9.6.1-r1564 on Linux 2.6.32-131.0.15.el6.x86_64 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "Intel X79". This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... FREG0: WARNING: Flash Descriptor region (0x00000000-0x0000ffff) is read-only. FREG2: WARNING: Management Engine region (0x00020000-0x007fffff) is locked. Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on http://flashrom.org/Supported_hardware#Supported_mainboards yet. Writes have been disabled. You can enforce write support with the ich_spi_force programmer option, but it will most likely harm your hardware! If you force flashrom you will get no support if something breaks. Enabling hardware sequencing due to multiple flash chips detected. OK. Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific) at physical address 0x0. No operations were specified. =================================== When I run "flashrom -p internal -r bios.bin" , the output is: =================================== root@ATCA-46XX@0-0-5:~# flashrom -p internal flashrom v0.9.6.1-r1564 on Linux 2.6.32-131.0.15.el6.x86_64 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "Intel X79". This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... FREG0: WARNING: Flash Descriptor region (0x00000000-0x0000ffff) is read-only. FREG2: WARNING: Management Engine region (0x00020000-0x007fffff) is locked. Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on http://flashrom.org/Supported_hardware#Supported_mainboards yet. Writes have been disabled. You can enforce write support with the ich_spi_force programmer option, but it will most likely harm your hardware! If you force flashrom you will get no support if something breaks. Enabling hardware sequencing due to multiple flash chips detected. OK. Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific) at physical address 0x0. No operations were specified. root@ATCA-46XX@0-0-5:~# flashrom -p internal -r bios.bin flashrom v0.9.6.1-r1564 on Linux 2.6.32-131.0.15.el6.x86_64 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "Intel X79". This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... FREG0: WARNING: Flash Descriptor region (0x00000000-0x0000ffff) is read-only. FREG2: WARNING: Management Engine region (0x00020000-0x007fffff) is locked. Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on http://flashrom.org/Supported_hardware#Supported_mainboards yet. Writes have been disabled. You can enforce write support with the ich_spi_force programmer option, but it will most likely harm your hardware! If you force flashrom you will get no support if something breaks. Enabling hardware sequencing due to multiple flash chips detected. OK. Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific) at physical address 0x0. Reading flash... Transaction error between offset 0x00020000 and 0x0002003f (= 0x00020000 + 63)! Read operation failed! FAILED. =================================================

1 0

[PATCH] Fix hwaccess (again).
by Stefan Tauner 23 Apr '13

23 Apr '13

Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- hwaccess.c | 32 +++++++++++++++++++------------- 1 file changed, 19 insertions(+), 13 deletions(-) diff --git a/hwaccess.c b/hwaccess.c index 598aa67..bad08d4 100644 --- a/hwaccess.c +++ b/hwaccess.c @@ -26,10 +26,9 @@ #error Unknown architecture #endif -#define IS_BSD (defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__) || defined(__OpenBSD__)) #define IS_LINUX (defined(__gnu_linux__) || defined(__linux__)) #define IS_MACOSX (defined(__APPLE__) && defined(__MACH__)) -#if !(IS_BSD || IS_LINUX || IS_MACOSX || defined(__DJGPP__) || defined(__LIBPAYLOAD__) || defined(__sun)) +#if !(IS_LINUX || IS_MACOSX || defined(__NetBSD__) || defined(__OpenBSD__) || defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__) || defined(__DJGPP__) || defined(__LIBPAYLOAD__) || defined(__sun)) #error "Unknown operating system" #endif @@ -47,7 +46,10 @@ #include "flash.h" #include "hwaccess.h" -#if IS_X86 && IS_BSD +#define USE_IOPL (IS_LINUX || IS_MACOSX || defined(__NetBSD__) || defined(__OpenBSD__)) +#define USE_DEV_IO (defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__)) + +#if IS_X86 && USE_DEV_IO int io_fd; #endif @@ -71,9 +73,9 @@ static int release_io_perms(void *p) { #if defined (__sun) sysi86(SI86V86, V86SC_IOPL, 0); -#elif IS_BSD +#elif USE_DEV_IO close(io_fd); -#elif IS_LINUX || IS_MACOSX +#elif USE_IOPL iopl(0); #endif return 0; @@ -86,17 +88,21 @@ int rget_io_perms(void) #if IS_X86 && !(defined(__DJGPP__) || defined(__LIBPAYLOAD__)) #if defined (__sun) if (sysi86(SI86V86, V86SC_IOPL, PS_IOPL) != 0) { -#elif IS_BSD +#elif USE_DEV_IO if ((io_fd = open("/dev/io", O_RDWR)) < 0) { -#elif IS_LINUX || IS_MACOSX +#elif USE_IOPL if (iopl(3) != 0) { #endif - msg_perr("ERROR: Could not get I/O privileges (%s).\n" - "You need to be root.\n", strerror(errno)); -#if defined (__OpenBSD__) - msg_perr("Please set securelevel=-1 in /etc/rc.securelevel and reboot, or reboot into \n"); - msg_perr("single user mode.\n"); -#endif + msg_perr("ERROR: Could not get I/O privileges (%s).\n", strerror(errno)); + msg_perr("You need to be root.\n"); +if defined (__OpenBSD__) + msg_perr("If you are root already please set securelevel=-1 in /etc/rc.securelevel and reboot\n" + "or reboot into single user mode.\n"); +#if defined(__NetBSD__) + msg_perr("If you are root already please set securelevel=-1 in /etc/rc.conf and reboot,\n" + "or reboot into single user mode, or check that your kernel configuration has" + "the option INSECURE enabled.\n"); +#el#endif return 1; } else { register_shutdown(release_io_perms, NULL); -- Kind regards, Stefan Tauner

1 0

Re: [flashrom] Multichip support for a dediprog SF100
by Marc Jones 23 Apr '13

23 Apr '13

Joshua, I ran into the same thing. I think that the flashrom dediprog support needs a flag to switch the chipselect. Marc On Tue, Apr 23, 2013 at 9:21 AM, Joshua Zarr <joshuazarr(a)gmail.com> wrote: > Hi All, > > I am using a dediprog SF100 to program the two flash chips (AT25DF321) on an > intel Stargo CRB. Does flashrom support programming each chip individually? > > Thanks, > Joshua Zarr > > _______________________________________________ > flashrom mailing list > flashrom(a)flashrom.org > http://www.flashrom.org/mailman/listinfo/flashrom -- http://se-eng.com

1 0

Multichip support for a dediprog SF100
by Joshua Zarr 23 Apr '13

23 Apr '13

Hi All, I am using a dediprog SF100 to program the two flash chips (AT25DF321) on an intel Stargo CRB. Does flashrom support programming each chip individually? Thanks, Joshua Zarr

1 0

Re: [flashrom] "MX25L12805(D)
by Stefan Tauner 23 Apr '13

23 Apr '13

On Mon, 22 Apr 2013 13:24:44 -0700 Skip WB6YMH <wb6ymh(a)gfrn.org> wrote: > I'd like to let you know that I successfully programmed the above > chip using a ft2232 based "TUMPA" interface card. I've programmed > two chips on two separate boards, but worked fine and booted > Linux. > > I did get one "get_buf failed: 1 > ftdi_write_data: -19, usb bulk write failed > send_buf failed at end: 1 > FAILED." > > Error, but that probably has nothing to do with the MX25L12805(D) chip. > > Thanks for the code ! > > Skip Hello Skip, thanks for your report! I have marked the flash chip as fully tested and will commit that later together with other small changes. Please include the complete log in future reports (and an additional one with verbose output (-V) if the normal run did not include that). That's especially interesting for error cases such as the one you mentioned. Do you remember when the error occurred exactly? -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

"MX25L12805(D)
by Skip WB6YMH 22 Apr '13

22 Apr '13

I'd like to let you know that I successfully programmed the above chip using a ft2232 based "TUMPA" interface card. I've programmed two chips on two separate boards, but worked fine and booted Linux. I did get one "get_buf failed: 1 ftdi_write_data: -19, usb bulk write failed send_buf failed at end: 1 FAILED." Error, but that probably has nothing to do with the MX25L12805(D) chip. Thanks for the code ! Skip

1 0

Report: Intel DQ77MK
by g_ml2000-x＠yahoo.de 20 Apr '13

20 Apr '13

2 1

report for ASUS P8B75M LE
by guido 20 Apr '13

20 Apr '13

root@sysresccd /root % flashrom -p internal -VV flashrom v0.9.6.1-runknown on Linux 3.4.35-std342-amd64 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.7, GCC 4.6.0 20110428 (Red Hat 4.6.0-6), little endian Command line (3 args): flashrom -p internal -VV Calibrating delay loop... OS timer resolution is 1 usecs, 3876M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1000 us, 10000 myus = 10003 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK COMPUTER INC." DMI string baseboard-product-name: "P8B75-M LE" DMI string baseboard-version: "Rev X.0x" DMI string chassis-type: "Desktop" Found chipset "Intel B75" with PCI ID 8086:1e49. This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode enabled 0xff600000/0xff200000 FWH decode enabled 0xff500000/0xff100000 FWH decode enabled 0xff400000/0xff000000 FWH decode enabled Maximum FWH chip size: 0x100000 bytes BIOS_CNTL = 0x09: BIOS Lock Enable: disabled, BIOS Write Enable: enabled Root Complex Register Block address = 0xfed1c000 GCS = 0xc65: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0xe008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 Warning: SPI Configuration Lockdown activated. Reading OPCODES... done OP Type Pre-OP op[0]: 0x02, write w/ addr, none op[1]: 0x03, read w/ addr, none op[2]: 0x20, write w/ addr, none op[3]: 0x05, read w/o addr, none op[4]: 0x9f, read w/o addr, none op[5]: 0x01, write w/o addr, none op[6]: 0x00, read w/o addr, none op[7]: 0x00, read w/o addr, none Pre-OP 0: 0x06, Pre-OP 1: 0x00 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00000000 (FADDR) 0x50: 0x00000a0b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b 0x54: 0x00000000 FREG0: Warning: Flash Descriptor region (0x00000000-0x00000fff) is read-only. 0x58: 0x0fff0800 FREG1: BIOS region (0x00800000-0x00ffffff) is read-write. 0x5C: 0x07ff0001 FREG2: Warning: Management Engine region (0x00001000-0x007fffff) is locked. 0x60: 0x00001fff FREG3: Gigabit Ethernet region is unused. 0x64: 0x00001fff FREG4: Platform Data region is unused. 0x74: 0x00000000 (PR0 is unused) 0x78: 0x00000000 (PR1 is unused) 0x7C: 0x00000000 (PR2 is unused) 0x80: 0x00000000 (PR3 is unused) 0x84: 0x00000000 (PR4 is unused) Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on http://flashrom.org/Supported_hardware#Supported_mainboards yet. Writes have been disabled for safety reasons. You can enforce write support with the ich_spi_force programmer option, but you will most likely harm your hardware! If you force flashrom you will get no support if something breaks. On a few mainboards it is possible to enable write access by setting a jumper (see its documentation or the board itself). 0x90: 0x80 (SSFS) SSFS: SCIP=0, FDONE=0, FCERR=0, AEL=0 0x91: 0xf94010 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=0, SME=0, SCF=1 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00802005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) Reading flash descriptors mapped by the chipset via FDOC/FDOD... done. === Content Section === FLVALSIG 0x0ff0a55a FLMAP0 0x02040103 FLMAP1 0x12100206 FLMAP2 0x00210120 --- Details --- NR (Number of Regions): 3 FRBA (Flash Region Base Address): 0x040 NC (Number of Components): 2 FCBA (Flash Component Base Address): 0x030 ISL (ICH/PCH Strap Length): 18 FISBA/FPSBA (Flash ICH/PCH Strap Base Address): 0x100 NM (Number of Masters): 3 FMBA (Flash Master Base Address): 0x060 MSL/PSL (MCH/PROC Strap Length): 1 FMSBA (Flash MCH/PROC Strap Base Address): 0x200 === Component Section === FLCOMP 0x09300024 FLILL 0x00000000 --- Details --- Component 1 density: 8 MB Component 2 density: 8 MB Read Clock Frequency: 20 MHz Read ID and Status Clock Freq.: 33 MHz Write and Erase Clock Freq.: 33 MHz Fast Read is supported. Fast Read Clock Frequency: 33 MHz No forbidden opcodes. === Region Section === FLREG0 0x00000000 FLREG1 0x0fff0800 FLREG2 0x07ff0001 FLREG3 0x00001fff --- Details --- Region 0 (Descr.) 0x00000000 - 0x00000fff Region 1 (BIOS ) 0x00800000 - 0x00ffffff Region 2 (ME ) 0x00001000 - 0x007fffff Region 3 (GbE ) is unused. === Master Section === FLMSTR1 0x0a0b0000 FLMSTR2 0x0c0d0000 FLMSTR3 0x08080118 --- Details --- Descr. BIOS ME GbE Platf. BIOS r rw rw ME r rw rw GbE rw Enabling hardware sequencing due to multiple flash chips detected. SPI Read Configuration: prefetching enabled, caching enabled, OK. The following protocols are supported: FWH, Programmer-specific. Probing for Programmer Opaque flash chip, 0 kB: Found 2 attached SPI flash chips with a combined density of 16384 kB. There is only one partition containing the whole address space (0x000000 - 0xffffff). There are 4096 erase blocks with 4096 B each. Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific) at physical address 0x0. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x00, id2 0x10, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Found Programmer flash chip "Opaque flash chip" (16384 kB, Programmer-specific). No operations were specified. Restoring MMIO space at 0xf77af8a0 Restoring PCI config space for 00:1f:0 reg 0xdc root@sysresccd /root %

2 1

AT25F512 recognized as AT25F1024
by Chi Zhang 19 Apr '13

19 Apr '13

Recently I got an AT25F512(no A) chip from my old nVidia Geforce FX 5200 card. However, flashrom seems to recognize it as AT25F1024: flashrom -p serprog:dev=/dev/ttyACM0:4000000,spispeed=1000000 flashrom v0.9.6.1-r1658 on Linux 3.2.0-39-generic (x86_64) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. serprog: Programmer name is "serprog-STM32VCP" Found Atmel flash chip "AT25F1024(A)" (128 kB, SPI) on serprog. No operations were specified. The detailed log with -VV canbe found at: http://paste.flashrom.org/view.php?id=1568

2 3

Re: [flashrom] [PATCH 2/2] Add support for PMC Pm25LD series.
by Stefan Tauner 19 Apr '13

19 Apr '13

On Tue, 2 Apr 2013 02:59:58 +0200 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> wrote: > This patch adds support for > - Pm25LD256C > - Pm25LD512(C) > - Pm25LD010(C) > - Pm25LD020(C) > - Pm25LD040(C) > > These seem to be the successors of the Pm25LV series. > The main difference seems to be the dual I/O and additional erase opcodes. > Some support an additional, complex locking register (maybe all of the > above, but available datahsheets do not indicate it for all). > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> refined, self-acked and committed in r1671. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] [PATCH 1/2] Refine PMC Pm25LV series.
by Stefan Tauner 19 Apr '13

19 Apr '13

On Tue, 2 Apr 2013 02:59:57 +0200 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> wrote: > - Resort > - Add Pm25LV512A and Pm25LV010A > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> refined and committed in r1670. the non-RDID probes in the datasheet are really spooky, any comments/insights/flames welcome. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[commit] r1671 - trunk
by repository service 19 Apr '13

19 Apr '13

Author: stefanct Date: Fri Apr 19 03:59:15 2013 New Revision: 1671 URL: http://flashrom.org/trac/flashrom/changeset/1671 Log: Add support for PMC Pm25LD series. This patch adds support for - Pm25LD256C - Pm25LD512(C) - Pm25LD010(C) - Pm25LD020(C) - Pm25LD040(C) These seem to be the successors of the Pm25LV series. The main difference seems to be the dual I/O and additional erase opcodes. Some support an additional, complex locking register (maybe all of the above, but available datahsheets do not indicate it for all). The Pm25LD512C was tested by Chi Zhang: http://paste.flashrom.org/view.php?id=1579 Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/flashchips.c trunk/flashchips.h trunk/spi25_statusreg.c Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Fri Apr 19 03:58:33 2013 (r1670) +++ trunk/flashchips.c Fri Apr 19 03:59:15 2013 (r1671) @@ -6562,6 +6562,195 @@ { .vendor = "PMC", + .name = "Pm25LD256C", + .bustype = BUS_SPI, + .manufacture_id = PMC_ID, + .model_id = PMC_PM25LD256C, + .total_size = 32, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 8} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 8} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {32 * 1024, 1} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {32 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {32 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp2, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ + .voltage = {2700, 3600}, + }, + { + .vendor = "PMC", + .name = "Pm25LD512(C)", + .bustype = BUS_SPI, + .manufacture_id = PMC_ID, + .model_id = PMC_PM25LD512, + .total_size = 64, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 16} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 16} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {32 * 1024, 2} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp2, + .unlock = spi_disable_blockprotect, /* FIXME: C version supports "Safe Guard" */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ + .voltage = {2300, 3600}, + }, + + { + .vendor = "PMC", + .name = "Pm25LD010(C)", + .bustype = BUS_SPI, + .manufacture_id = PMC_ID, + .model_id = PMC_PM25LD010, + .total_size = 128, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 32} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp2, + .unlock = spi_disable_blockprotect, /* FIXME: C version supports "Safe Guard" */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ + .voltage = {2700, 3600}, /* 2.3-3.6V for Pm25LD010 */ + }, + + { + .vendor = "PMC", + .name = "Pm25LD020(C)", + .bustype = BUS_SPI, + .manufacture_id = PMC_ID, + .model_id = PMC_PM25LD020, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {64 * 1024, 4} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp2, + .unlock = spi_disable_blockprotect, /* FIXME: C version supports "Safe Guard" */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ + .voltage = {2700, 3600}, /* 2.3-3.6V for Pm25LD020 */ + }, + + { + .vendor = "PMC", + .name = "Pm25LD040(C)", + .bustype = BUS_SPI, + .manufacture_id = PMC_ID, + .model_id = PMC_PM25LV040, + .total_size = 512, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {4 * 1024, 128} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {64 * 1024, 8} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {512 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp2, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ + .voltage = {2700, 3600}, /* 2.3-3.6V for Pm25LD040 */ + }, + +{ + .vendor = "PMC", .name = "Pm25LV512(A)", .bustype = BUS_SPI, .manufacture_id = PMC_ID, Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Fri Apr 19 03:58:33 2013 (r1670) +++ trunk/flashchips.h Fri Apr 19 03:59:15 2013 (r1671) @@ -450,6 +450,7 @@ /* * Programmable Micro Corp is listed in JEP106W in bank 2, so it should * have a 0x7F continuation code prefix. + * Apparently this name is owned by "Chingis Technology Corporation" http://www.chingistek.com. */ #define PMC_ID 0x7F9D /* PMC */ #define PMC_ID_NOPREFIX 0x9D /* PMC, missing 0x7F prefix */ @@ -460,7 +461,7 @@ #define PMC_PM25LV512 0x7B /* Same as Pm25LV512A */ #define PMC_PM25LV010 0x7C /* Same as Pm25LV010A, but the former does not support RDID but RES3 only. */ #define PMC_PM25LV020 0x7D -#define PMC_PM25LV040 0x7E +#define PMC_PM25LV040 0x7E /* Same as PM25LD040(C), but the latter supports more features. */ #define PMC_PM25LV080B 0x13 #define PMC_PM25LV016B 0x14 #define PMC_PM29F002T 0x1D Modified: trunk/spi25_statusreg.c ============================================================================== --- trunk/spi25_statusreg.c Fri Apr 19 03:58:33 2013 (r1670) +++ trunk/spi25_statusreg.c Fri Apr 19 03:59:15 2013 (r1671) @@ -262,6 +262,7 @@ /* Works for many chips of the * AMIC A25L series + * PMC Pm25LD series */ int spi_prettyprint_status_register_default_bp2(struct flashctx *flash) {

1 0

[commit] r1670 - trunk
by repository service 19 Apr '13

19 Apr '13

Author: stefanct Date: Fri Apr 19 03:58:33 2013 New Revision: 1670 URL: http://flashrom.org/trac/flashrom/changeset/1670 Log: Refine PMC Pm25LV series. - Add missing bits and resort chips - Refine Pm25LV512(A) and Pm25LV010 Due to manufacturer ID continuation this one needs a new probing function: probe_spi_res3() which should be refactored in the future. The datasheet describes a very weird order of ID bytes: Vendor byte, model byte, vendor continuation byte. Let's pretend we did not read that or the datasheet is bogus (although the datasheet of the successor series describes the same but luckily additionally to RDID). - Add Pm25LV010A This was tested by Chi Zhang: http://paste.flashrom.org/view.php?id=1573 Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/chipdrivers.h trunk/flashchips.c trunk/flashchips.h trunk/spi25.c Modified: trunk/chipdrivers.h ============================================================================== --- trunk/chipdrivers.h Sat Apr 13 02:29:30 2013 (r1669) +++ trunk/chipdrivers.h Fri Apr 19 03:58:33 2013 (r1670) @@ -38,6 +38,7 @@ int probe_spi_rems(struct flashctx *flash); int probe_spi_res1(struct flashctx *flash); int probe_spi_res2(struct flashctx *flash); +int probe_spi_res3(struct flashctx *flash); int probe_spi_at25f(struct flashctx *flash); int spi_write_enable(struct flashctx *flash); int spi_write_disable(struct flashctx *flash); Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Sat Apr 13 02:29:30 2013 (r1669) +++ trunk/flashchips.c Fri Apr 19 03:58:33 2013 (r1670) @@ -6562,6 +6562,38 @@ { .vendor = "PMC", + .name = "Pm25LV512(A)", + .bustype = BUS_SPI, + .manufacture_id = PMC_ID, + .model_id = PMC_PM25LV512, + .total_size = 64, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_UNTESTED, + .probe = probe_spi_res3, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 16} }, + .block_erase = spi_block_erase_d7, + }, { + .eraseblocks = { {32 * 1024, 2} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp1, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "PMC", .name = "Pm25LV010", .bustype = BUS_SPI, .manufacture_id = PMC_ID, @@ -6570,7 +6602,7 @@ .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, + .probe = probe_spi_res3, .probe_timing = TIMING_ZERO, .block_erasers = { @@ -6585,48 +6617,42 @@ .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .printlock = spi_prettyprint_status_register_default_bp1, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "PMC", - .name = "Pm25LV016B", + .name = "Pm25LV010A", .bustype = BUS_SPI, .manufacture_id = PMC_ID, - .model_id = PMC_PM25LV016B, - .total_size = 2048, + .model_id = PMC_PM25LV010, + .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { - .eraseblocks = { {4 * 1024, 512} }, + .eraseblocks = { {4 * 1024, 32} }, .block_erase = spi_block_erase_d7, }, { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, + .eraseblocks = { {32 * 1024, 4} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, + .eraseblocks = { {128 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .printlock = spi_prettyprint_status_register_default_bp1, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, @@ -6655,7 +6681,7 @@ .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .printlock = spi_prettyprint_status_register_default_bp2, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, .read = spi_chip_read, @@ -6687,10 +6713,10 @@ .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .printlock = spi_prettyprint_status_register_default_bp2, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, @@ -6725,20 +6751,20 @@ .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .printlock = spi_prettyprint_status_register_default_bp2, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, { .vendor = "PMC", - .name = "Pm25LV512", + .name = "Pm25LV016B", .bustype = BUS_SPI, .manufacture_id = PMC_ID, - .model_id = PMC_PM25LV512, - .total_size = 64, + .model_id = PMC_PM25LV016B, + .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, .tested = TEST_UNTESTED, @@ -6747,20 +6773,26 @@ .block_erasers = { { - .eraseblocks = { {4 * 1024, 16} }, + .eraseblocks = { {4 * 1024, 512} }, .block_erase = spi_block_erase_d7, }, { - .eraseblocks = { {32 * 1024, 2} }, + .eraseblocks = { {4 * 1024, 512} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 32} }, .block_erase = spi_block_erase_d8, }, { - .eraseblocks = { {64 * 1024, 1} }, + .eraseblocks = { {2 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2 * 1024 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ + .printlock = spi_prettyprint_status_register_default_bp2, .unlock = spi_disable_blockprotect, .write = spi_chip_write_256, - .read = spi_chip_read, + .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {2700, 3600}, }, Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Sat Apr 13 02:29:30 2013 (r1669) +++ trunk/flashchips.h Fri Apr 19 03:58:33 2013 (r1670) @@ -453,8 +453,12 @@ */ #define PMC_ID 0x7F9D /* PMC */ #define PMC_ID_NOPREFIX 0x9D /* PMC, missing 0x7F prefix */ -#define PMC_PM25LV512 0x7B -#define PMC_PM25LV010 0x7C +#define PMC_PM25LD256C 0x2F +#define PMC_PM25LD512 0x20 /* Same as Pm25LD512C, but the latter has more locking options. */ +#define PMC_PM25LD010 0x21 /* Same as Pm25LD010C, but the latter has more locking options. */ +#define PMC_PM25LD020 0x22 /* Same as Pm25LD020C, but the latter has more locking options. */ +#define PMC_PM25LV512 0x7B /* Same as Pm25LV512A */ +#define PMC_PM25LV010 0x7C /* Same as Pm25LV010A, but the former does not support RDID but RES3 only. */ #define PMC_PM25LV020 0x7D #define PMC_PM25LV040 0x7E #define PMC_PM25LV080B 0x13 Modified: trunk/spi25.c ============================================================================== --- trunk/spi25.c Sat Apr 13 02:29:30 2013 (r1669) +++ trunk/spi25.c Fri Apr 19 03:58:33 2013 (r1670) @@ -279,6 +279,26 @@ return 1; } +int probe_spi_res3(struct flashctx *flash) +{ + unsigned char readarr[3]; + uint32_t id1, id2; + + if (spi_res(flash, readarr, 3)) { + return 0; + } + + id1 = (readarr[0] << 8) | readarr[1]; + id2 = readarr[2]; + + msg_cdbg("%s: id1 0x%x, id2 0x%x\n", __func__, id1, id2); + + if (id1 != flash->chip->manufacture_id || id2 != flash->chip->model_id) + return 0; + + return 1; +} + /* Only used for some Atmel chips. */ int probe_spi_at25f(struct flashctx *flash) {

1 0

Re: [flashrom] Intel QM67 - Macronix MX25L6405 flash read problem
by Stefan Tauner 18 Apr '13

18 Apr '13

On Fri, 19 Apr 2013 00:20:54 +0300 George Ciobanu <mrg2k8(a)gmail.com> wrote: > Hello, > > It's me again. I had some free time so I decided to disassemble the > notebook and to wire it directly to the arduino, using Simon Inns' > schematic. I didn't desolder the chip. > > I've hit a roadblock, though. I get this message: *Probing for Macronix > MX25L6405(D), 8192 kB: RDID byte 0 parity violation. > probe_spi_rdid_generic: id1 0xff, id2 0xffff* > * > * > I tried patching flashrom with http://patchwork.coreboot.org/patch/3851/, > still with no luck. I am sure the flash model is correct, because I can > read it on the capsule. > > I've attached the logs, with and without the -c option. > > In the hope that a solution will arise, > I thank you again. Hello George, the output of the chip as seen by the arduino toggles a lot between the correct output and all high (or some corrupt bits too). This usually indicates a cabling problem. You should not need any patches additional to what is in our subversion repository's HEAD, just check that the connections are good (better :). -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] Intel QM67 - Macronix MX25L6405 flash read problem
by Stefan Tauner 18 Apr '13

18 Apr '13

On Fri, 15 Mar 2013 15:56:28 +0200 George Ciobanu <mrg2k8(a)gmail.com> wrote: > I've tried to read the contents of the memory in the subject, but it > failed. I'm using a Panasonic CF-53 Toughbook and I have attached the > verbose output. > 0x5C: 0x057f0003 FREG2: Warning: Management Engine region (0x00003000-0x0057ffff) is locked. Hello George, thanks for your report! The problem is the locked ME region as quoted above. We are working on unlocking it or working around it, but intel does not provide us any documentation so please do not expect a solution soon (or ever). > Do you think that I will be able to read the memory using serprog and an > Arduino, unsoldering it from the motherboard or will flashrom just give the > same error? The problem is the configuration of the mainboard chipset. Outside of the board flashrom will definitely be able to read and write the chip (there is a minor problem of misdetecting the MX25L6405 because Macronix used the same ID for different chips, but there is a patch for that http://patchwork.coreboot.org/patch/3851/ and a quick hack that you could apply locally is just a simple number change). You might be able to access the flash chip while it is still soldered, so that you do not need to desolder it (completely), see http://flashrom.org/ISP If you need to read the BIOS region only, there is a complete software-based solution too. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

[PATCH 2/2] sbxxx: hack to disable fast reads and force lowest possible SPI clock
by Stefan Tauner 18 Apr '13

18 Apr '13

Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- sb600spi.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/sb600spi.c b/sb600spi.c index 42a0ece..95e5ad1 100644 --- a/sb600spi.c +++ b/sb600spi.c @@ -246,6 +246,16 @@ int sb600_probe_spi(struct pci_dev *dev) msg_pdbg("PrefetchEnSPIFromHost=%i, SpiOpEnInLpcMode=%i\n", tmp & 0x1, (tmp & 0x20) >> 5); tmp = mmio_readl(sb600_spibar); + if (((tmp >> 18) & 0x3) != 0) { + msg_pdbg("Disabling fast reads and setting SPI clock to 16.5 MHz..."); + tmp &= ~(0x3 << 18); + mmio_writel(tmp, sb600_spibar); + mmio_writeb(mmio_readb(sb600_spibar + 0xd) | (0x3 << 4), sb600_spibar + 0xd); + + tmp = mmio_readl(sb600_spibar); + msg_pdbg(" done\n"); + } + /* FIXME: If SpiAccessMacRomEn or SpiHostAccessRomEn are zero on * SB700 or later, reads and writes will be corrupted. Abort in this * case. Make sure to avoid this check on SB600. -- Kind regards, Stefan Tauner

1 0

[PATCH 1/2] sbxxx: spibar[0] debug print refinements
by Stefan Tauner 18 Apr '13

18 Apr '13

Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- flash.h | 1 + sb600spi.c | 6 +++--- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/flash.h b/flash.h index 6ff691a..1857cc0 100644 --- a/flash.h +++ b/flash.h @@ -24,6 +24,7 @@ #ifndef __FLASH_H__ #define __FLASH_H__ 1 +#include <inttypes.h> #include <stdint.h> #include <stddef.h> #ifdef _WIN32 diff --git a/sb600spi.c b/sb600spi.c index fe60aa9..42a0ece 100644 --- a/sb600spi.c +++ b/sb600spi.c @@ -211,7 +211,7 @@ int sb600_probe_spi(struct pci_dev *dev) uint32_t tmp; uint8_t reg; static const char *const speed_names[4] = { - "Reserved", "33", "22", "16.5" + "66", "33", "22", "16.5" }; /* Read SPI_BaseAddr */ @@ -250,10 +250,10 @@ int sb600_probe_spi(struct pci_dev *dev) * SB700 or later, reads and writes will be corrupted. Abort in this * case. Make sure to avoid this check on SB600. */ - msg_pdbg("SpiArbEnable=%i, SpiAccessMacRomEn=%i, " + msg_pdbg("(0x08" PRIx32 ") fastReadEnable=%u, SpiArbEnable=%i, SpiAccessMacRomEn=%i, " "SpiHostAccessRomEn=%i, ArbWaitCount=%i, " "SpiBridgeDisable=%i, DropOneClkOnRd=%i\n", - (tmp >> 19) & 0x1, (tmp >> 22) & 0x1, + (tmp >> 18) & 0x3, (tmp >> 19) & 0x1, (tmp >> 22) & 0x1, (tmp >> 23) & 0x1, (tmp >> 24) & 0x7, (tmp >> 27) & 0x1, (tmp >> 28) & 0x1); tmp = (mmio_readb(sb600_spibar + 0xd) >> 4) & 0x3; -- Kind regards, Stefan Tauner

1 0

[PATCH 0/2] AMD sbxxx hacks.
by Stefan Tauner 18 Apr '13

18 Apr '13

andor had some problems with how coreboot configured the SPI controller. let's see if this hack fixes that. Stefan Tauner (2): sbxxx: spibar[0] debug print refinements sbxxx: hack to disable fast reads and force lowest possible SPI clock flash.h | 1 + sb600spi.c | 16 +++++++++++++--- 2 files changed, 14 insertions(+), 3 deletions(-) -- Kind regards, Stefan Tauner

1 0

MSR access fix on ALIX2D13 running OpenBSD-5.3
by Leonardo Guardati 17 Apr '13

17 Apr '13

Using flashrom-trunk on PCEngines' ALIX2D13 board running OpenBSD-5.3 (current) doesn't work. The chipset is AMD Geode CS5536. Here the steps: 1. Applied patch amdmsr.patch to openbsd kernel (/usr/src/sys/arch/i386/i386/amdmsr.c) Explaination: the original code checks for GPU presence (alix has no GPU) and fails; I just skip the check. 2. got last flashrom version (trunk) 3. applied given patch http://patchwork.coreboot.org/patch/3932/ 4. applied given patch http://patchwork.coreboot.org/patch/3933/ 5. applied patch hwaccess.patch Explaination: openbsd uses a different way to retrieve IO Priviledge Level, see i386_iopl(2) man page. 6. applied patch physmap.patch Explaination: minor code mismatches fixed and /dev/amdmsr0 changed to /dev/amdmsr. The 3 patches are attached. I confirm running "./flashrom -p internal -r bios.bin" extracts the same bios image got from flashrom run on linux. (md5 checks) Thank You. Leonardo.

2 4

Re: [flashrom] Sapphire IPC-E350M1 mainboard read success
by Антон Кочков 16 Apr '13

16 Apr '13

Reading flash http://paste.flashrom.org/view.php?id=1607 Writing flash http://paste.flashrom.org/view.php?id=1608 Best regards, Anton Kochkov. On Tue, Apr 16, 2013 at 4:06 PM, Антон Кочков <anton.kochkov(a)gmail.com> wrote: > Here is full read log on trunk flashrom > https://mega.co.nz/#!ndQhQLxL!NgMxOTwHi_oCGUD0663wjXKIcQoGWO1VU_XnXM_sY50 > > Sorry for using fileshare service, but full log is about 75Mb. > > Best regards, > Anton Kochkov.

1 0

flashrom layout patches testing on Intel DQ77MK mainboard
by Антон Кочков 16 Apr '13

16 Apr '13

Layout file - http://paste.flashrom.org/view.php?id=1602 Reading descriptors http://paste.flashrom.org/view.php?id=1603 Reading main image http://paste.flashrom.org/view.php?id=1604 Reading GbE http://paste.flashrom.org/view.php?id=1605 Reading ME (fail) http://paste.flashrom.org/view.php?id=1606 Best regards, Anton Kochkov.

1 0

Sapphire IPC-E350M1 mainboard read success
by Антон Кочков 16 Apr '13

16 Apr '13

Here is full read log on trunk flashrom https://mega.co.nz/#!ndQhQLxL!NgMxOTwHi_oCGUD0663wjXKIcQoGWO1VU_XnXM_sY50 Sorry for using fileshare service, but full log is about 75Mb. Best regards, Anton Kochkov.

1 0

problem with ASUS motherboard
by Carlos 15 Apr '13

15 Apr '13

hello, to update the chip w39v040bp w39v040fb and having the corrupted BIOS on a motherboard ASUS P4GE-mx erasing fault so could not write, and I need to get those bios urgent Thanks

2 2

Re: [flashrom] [PATCH] Introduce serialport_config().
by Stefan Tauner 13 Apr '13

13 Apr '13

On Mon, 1 Apr 2013 18:35:47 +0200 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> wrote: > Also, initialize sp_fd and fix baud rate setting on windows. I have extracted those two changes into a separate patch and committed them in r1669 - because... that's almost 2 weeks again. :/ -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[commit] r1669 - trunk
by repository service 13 Apr '13

13 Apr '13

Author: stefanct Date: Sat Apr 13 02:29:30 2013 New Revision: 1669 URL: http://flashrom.org/trac/flashrom/changeset/1669 Log: Initialize sp_fd and fix baud rate setting on windows. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/serial.c Modified: trunk/serial.c ============================================================================== --- trunk/serial.c Sun Apr 7 15:08:30 2013 (r1668) +++ trunk/serial.c Sat Apr 13 02:29:30 2013 (r1669) @@ -39,7 +39,7 @@ #include "flash.h" #include "programmer.h" -fdtype sp_fd; +fdtype sp_fd = SER_INV_FD; void __attribute__((noreturn)) sp_die(char *msg) { @@ -189,7 +189,7 @@ goto out_close; } const struct baudentry *entry = round_baud(baud); - dcb.BaudRate = entry->baud; + dcb.BaudRate = entry->flag; dcb.ByteSize = 8; dcb.Parity = NOPARITY; dcb.StopBits = ONESTOPBIT;

1 0

[PATCH 2/2] Add support for AMD Geode's MSR on OpenBSD.
by Stefan Tauner 13 Apr '13

13 Apr '13

Previously the default implementation was used, which always failed. On other systems than the Geode the code is not equal to that anymore, but should not explode because setup_cpu_msr() returns an error and therefore no other MSR functions should be called. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- physmap.c | 94 ++++++++++++++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 84 insertions(+), 10 deletions(-) diff --git a/physmap.c b/physmap.c index 4ebfb06..b6a9163 100644 --- a/physmap.c +++ b/physmap.c @@ -282,6 +282,8 @@ void *physmap_try_ro(const char *descr, unsigned long phys_addr, size_t len) PHYSMAP_RO); } +/* MSR abstraction implementations for Linux, OpenBSD, FreeBSD/Dragonfly, OSX, libpayload + * and a non-working default implemenation on the bottom. See also hwaccess.h for some (re)declarations. */ #if defined(__i386__) || defined(__x86_64__) #ifdef __linux__ @@ -381,8 +383,83 @@ void cleanup_cpu_msr(void) /* Clear MSR file descriptor. */ fd_msr = -1; } -#else -#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__) +#elif defined(__OpenBSD__) /* This does only work for certain AMD Geode LX systems see amdmsr(4). */ +#include <sys/ioctl.h> +#include <machine/amdmsr.h> + +static int fd_msr = -1; + +msr_t rdmsr(int addr) +{ + struct amdmsr_req args; + + msr_t msr = { 0xffffffff, 0xffffffff }; + + args.addr = (uint32_t)addr; + + if (ioctl(fd_msr, RDMSR, &args) < 0) { + msg_perr("Error while executing RDMSR ioctl: %s\n", strerror(errno)); + close(fd_msr); + exit(1); + } + + msr.lo = args.val & 0xffffffff; + msr.hi = args.val >> 32; + + return msr; +} + +int wrmsr(int addr, msr_t msr) +{ + struct amdmsr_req args; + + args.msr = addr; + args.val = (((uint64_t)msr.hi) << 32) | msr.lo; + + if (ioctl(fd_msr, WRMSR, &args) < 0) { + msg_perr("Error while executing WRMSR ioctl: %s\n", strerror(errno)); + close(fd_msr); + exit(1); + } + + return 0; +} + +int setup_cpu_msr(int cpu) +{ + char msrfilename[64]; + memset(msrfilename, 0, sizeof(msrfilename)); + snprintf(msrfilename, sizeof(msrfilename), "/dev/amdmsr"); + + if (fd_msr != -1) { + msg_pinfo("MSR was already initialized\n"); + return -1; + } + + fd_msr = open(msrfilename, O_RDWR); + + if (fd_msr < 0) { + msg_perr("Error while opening %s: %s\n", msrfilename, strerror(errno)); + return -1; + } + + return 0; +} + +void cleanup_cpu_msr(void) +{ + if (fd_msr == -1) { + msg_pinfo("No MSR initialized.\n"); + return; + } + + close(fd_msr); + + /* Clear MSR file descriptor. */ + fd_msr = -1; +} + +#elif defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__) #include <sys/ioctl.h> typedef struct { @@ -465,9 +542,7 @@ void cleanup_cpu_msr(void) fd_msr = -1; } -#else - -#if defined(__MACH__) && defined(__APPLE__) +#elif defined(__MACH__) && defined(__APPLE__) int setup_cpu_msr(int cpu) { // Always succeed for now @@ -494,6 +569,7 @@ int libpayload_wrmsr(int addr, msr_t msr) return 0; } #else +/* default MSR implementation */ msr_t rdmsr(int addr) { msr_t ret = { 0xffffffff, 0xffffffff }; @@ -516,9 +592,7 @@ void cleanup_cpu_msr(void) { // Nothing, yet. } -#endif -#endif -#endif -#else +#endif // OS switches for MSR code +#else // x86 /* Does MSR exist on non-x86 architectures? */ -#endif +#endif // arch switches for MSR code -- Kind regards, Stefan Tauner

1 0

[PATCH 1/2] Fix hwaccess (again).
by Stefan Tauner 13 Apr '13

13 Apr '13

Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- hwaccess.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/hwaccess.c b/hwaccess.c index 598aa67..df0306f 100644 --- a/hwaccess.c +++ b/hwaccess.c @@ -26,10 +26,9 @@ #error Unknown architecture #endif -#define IS_BSD (defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__) || defined(__OpenBSD__)) #define IS_LINUX (defined(__gnu_linux__) || defined(__linux__)) #define IS_MACOSX (defined(__APPLE__) && defined(__MACH__)) -#if !(IS_BSD || IS_LINUX || IS_MACOSX || defined(__DJGPP__) || defined(__LIBPAYLOAD__) || defined(__sun)) +#if !(IS_LINUX || IS_MACOSX || defined(__NetBSD__) || defined(__OpenBSD__) || defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__) || defined(__DJGPP__) || defined(__LIBPAYLOAD__) || defined(__sun)) #error "Unknown operating system" #endif @@ -47,7 +46,10 @@ #include "flash.h" #include "hwaccess.h" -#if IS_X86 && IS_BSD +#define USE_IOPL (IS_LINUX || IS_MACOSX || defined(__NetBSD__) || defined(__OpenBSD__)) +#define USE_DEV_IO (defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__)) + +#if IS_X86 && USE_DEV_IO int io_fd; #endif @@ -71,9 +73,9 @@ static int release_io_perms(void *p) { #if defined (__sun) sysi86(SI86V86, V86SC_IOPL, 0); -#elif IS_BSD +#elif USE_DEV_IO close(io_fd); -#elif IS_LINUX || IS_MACOSX +#elif USE_IOPL iopl(0); #endif return 0; @@ -86,14 +88,14 @@ int rget_io_perms(void) #if IS_X86 && !(defined(__DJGPP__) || defined(__LIBPAYLOAD__)) #if defined (__sun) if (sysi86(SI86V86, V86SC_IOPL, PS_IOPL) != 0) { -#elif IS_BSD +#elif USE_DEV_IO if ((io_fd = open("/dev/io", O_RDWR)) < 0) { -#elif IS_LINUX || IS_MACOSX +#elif USE_IOPL if (iopl(3) != 0) { #endif msg_perr("ERROR: Could not get I/O privileges (%s).\n" "You need to be root.\n", strerror(errno)); -#if defined (__OpenBSD__) +#if defined(__NetBSD__) || defined (__OpenBSD__) msg_perr("Please set securelevel=-1 in /etc/rc.securelevel and reboot, or reboot into \n"); msg_perr("single user mode.\n"); #endif -- Kind regards, Stefan Tauner

1 0

Re: [flashrom] Added chipsets
by Stefan Tauner 12 Apr '13

12 Apr '13

> On Apr 12, 2013 1:42 AM, "Николай Николаев" <evrinoma(a)gmail.com> wrote: > > i think if the flashrom wiki page to give the link on chip documentation > that It will be great decision to avoid problem with name chip and > searching documentations. the problem is that most flash chip datasheets are not available (any longer) from the original manufacturer and that we can not host them on our own (although there might be some legal loopholes to do so, this is pretty much out of question). maintaining a list to somewhat stable manufacturer sites is a lot of work. i know that because i am mostly the one who maintains the mainboard links. maintaining a list of links to other sources like alldatasheets.com or whatever will be even more work because they change URLs or become otherwise defunct is even more frequently. if someone wants to do this feel free to create a wikipage for it, i certainly will not. the solution that has worked in the past is: naming the revision of datasheets and source links in reviews and patches, especially in cases of ambiguity; and if the datasheets are not available anymore one can share them privately without a huge legal risk. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

Re: [flashrom] Added chipsets
by Steven Zakulec 12 Apr '13

12 Apr '13

Thanks- please keep the flashrom list included so everyone else can see your response as well. On Apr 12, 2013 1:42 AM, "Николай Николаев" <evrinoma(a)gmail.com> wrote: > > hi > > |Eon EN25S10: > |+ .eraseblocks = { {32 * 1024, 4} }, > |+ .block_erase = spi_block_erase_d8, > |The .block_erase appears to be wrong here- it should be spi_block_erase_52 according to the datasheet. > | > |Eon EN25S16: > |+ .eraseblocks = { {32 * 1024, 64} }, > |+ .block_erase = spi_block_erase_52, > > |It appears both the .eraseblocks and the .block_erase are wrong: > |.eraseblocks should be { {64 * 1024, 32} } - there are 32 blocks of 64 KBytes, not 64 blocks of 32 KBytes. > |.block_erase uses spi_block_erase_52 when it should use spi_block_erase_d8. > > > you are right. this is my a typos. And i rechecked my patch with all chips parameters and found new some typos. I will rewrite a patch and resend him. > > |AMIC A25LQ016: I couldn't find a datasheet for this chip available- I've got a A25LQ032 datasheet, but not one for the A25LQ016. Could you point me to that > |sheet, or provide me with a copy? > > Sorry this is my typos. > Could you try to search again something like a A25LQ16 > > |Eon EN25S32: > |+ .eraseblocks = { {32 * 1024, 128} }, > |+ .block_erase = spi_block_erase_52, > |I don't see where you are getting that .eraseblocks from- I can't find it in the datasheet. > |I also don't know where the .block_erase came from- there is no 0x52 opcode in the datasheet. > > http://www.transonics.com/images/file/pdf/eon/EN25S32.pdf > please see page 1 and page 5 - memory organization > •Uniform Sector Architecture: > -1024 sectors of 4-Kbyte > -128 blocks of 32-Kbyte > -64 blocks of 64-Kbyte > -Any sector or block can be erased individually > > please see page 12 - Table 4A. Instruction Set > this is chip has a 0x52 opcode in the datasheet > > i think if the flashrom wiki page to give the link on chip documentation that It will be great decision to avoid problem with name chip and searching documentations. > > -- > With best regards Nikolay Nikolaev > С Уважением Николаев Николай

1 0

Re: [flashrom] Added chipsets
by Steven Zakulec 11 Apr '13

11 Apr '13

On Mon, Mar 4, 2013 at 7:00 AM, Николай Николаев <evrinoma(a)gmail.com> wrote: > > Hi > > "Some additions of chips are non-functional yet... e.g. there is no > support for more than 24 bits in addresses, but some chips require that. > Also, please do not send patches as base64 encoded attachments." > > All these chips has a 24 addressing limit, or three bytes. To addressing > above 16Mbyte we must program special register - extend addressing space - > it's look like a fetcher bit. > > "I took a closer look at your patch. It contains a lot of white space > errors. Please make sure that this won't happen again. Checking data > sheets to review such patches is no fun, dealing with other's > white space errors is even worse ;)" > > sorry i now rechecked my patches by linux checkpatch.pl script. > > 8) > -- > With best regards Nikolay Nikolaev > С Уважением Николаев Николай > > _______________________________________________ > flashrom mailing list > flashrom(a)flashrom.org > http://www.flashrom.org/mailman/listinfo/flashrom > So, I've started reviewing some of this patch against the datasheets. General questions to flashrom developers/things I haven't reviewed/non-specific comments: .manufacture_id, model_id: Not sure how to check these. .page_size: I assume they are all 256 as per point 6 here: http://flashrom.org/index.php?title=Development_Guidelines .probe, .probe_timing: Make sure it has probe_spi_rdid & TIMING_ZERO if SPI chip and probe opcode 0x9F. .printlock, .unlock, .write, .read : I'm not sure how to review any of these items. Comments on specific chips: AMIC A25LQ016: I couldn't find a datasheet for this chip available- I've got a A25LQ032 datasheet, but not one for the A25LQ016. Could you point me to that sheet, or provide me with a copy? Eon EN25S10: + .eraseblocks = { {32 * 1024, 4} }, + .block_erase = spi_block_erase_d8, The .block_erase appears to be wrong here- it should be spi_block_erase_52 according to the datasheet. Eon EN25S16: + .eraseblocks = { {32 * 1024, 64} }, + .block_erase = spi_block_erase_52, It appears both the .eraseblocks and the .block_erase are wrong: .eraseblocks should be { {64 * 1024, 32} } - there are 32 blocks of 64 KBytes, not 64 blocks of 32 KBytes. .block_erase uses spi_block_erase_52 when it should use spi_block_erase_d8. Eon EN25S32: + .eraseblocks = { {32 * 1024, 128} }, + .block_erase = spi_block_erase_52, I don't see where you are getting that .eraseblocks from- I can't find it in the datasheet. I also don't know where the .block_erase came from- there is no 0x52 opcode in the datasheet. I'll send follow-up emails later for the next group of chips.

1 0

Re: [flashrom] [PATCH 1/2] Get rid of perror().
by Carl-Daniel Hailfinger 08 Apr '13

08 Apr '13

Am 07.04.2013 04:30 schrieb Stefan Tauner: > It prints to stderr and that's not what we want necesserily; > using msg_*err gives us more control. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Thanks! A long overdue cleanup. Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Regards, Carl-Daniel -- http://www.hailfinger.org/

2 1

What alternatives of SPI flash Winbond 25Q32BVSIG is exists?
by CarelessChaser 08 Apr '13

08 Apr '13

Hi guys! I have motherboard Gigabyte GA-970A-UD3 with DualBIOS (two chips Winbond 25Q32BVSIG). I want to test coreboot, and I'm looking for alternatives of Winbond 25Q32BVSIG. Can you help me? //Also, I'm planning to buy BusPirate. Is this good choice for newbie?

2 1

[commit] r1668 - trunk
by repository service 07 Apr '13

07 Apr '13

Author: stefanct Date: Sun Apr 7 15:08:30 2013 New Revision: 1668 URL: http://flashrom.org/trac/flashrom/changeset/1668 Log: Get rid of perror(). It prints to stderr and that's not what we want necesserily; using msg_*err gives us more control. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Modified: trunk/cli_output.c trunk/flashrom.c trunk/physmap.c Modified: trunk/cli_output.c ============================================================================== --- trunk/cli_output.c Fri Apr 5 10:06:10 2013 (r1667) +++ trunk/cli_output.c Sun Apr 7 15:08:30 2013 (r1668) @@ -50,7 +50,7 @@ return 1; } if ((logfile = fopen(filename, "w")) == NULL) { - perror(filename); + msg_gerr("Error: opening log file \"%s\" failed: %s\n", filename, strerror(errno)); return 1; } return 0; Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Fri Apr 5 10:06:10 2013 (r1667) +++ trunk/flashrom.c Sun Apr 7 15:08:30 2013 (r1668) @@ -29,6 +29,7 @@ #endif #include <string.h> #include <stdlib.h> +#include <errno.h> #include <ctype.h> #include <getopt.h> #if HAVE_UTSNAME == 1 @@ -1158,11 +1159,11 @@ struct stat image_stat; if ((image = fopen(filename, "rb")) == NULL) { - perror(filename); + msg_gerr("Error: opening file \"%s\" failed: %s\n", filename, strerror(errno)); return 1; } if (fstat(fileno(image), &image_stat) != 0) { - perror(filename); + msg_gerr("Error: getting metadata of file \"%s\" failed: %s\n", filename, strerror(errno)); fclose(image); return 1; } @@ -1174,7 +1175,7 @@ } numbytes = fread(buf, 1, size, image); if (fclose(image)) { - perror(filename); + msg_gerr("Error: closing file \"%s\" failed: %s\n", filename, strerror(errno)); return 1; } if (numbytes != size) { @@ -1196,7 +1197,7 @@ return 1; } if ((image = fopen(filename, "wb")) == NULL) { - perror(filename); + msg_gerr("Error: opening file \"%s\" failed: %s\n", filename, strerror(errno)); return 1; } Modified: trunk/physmap.c ============================================================================== --- trunk/physmap.c Fri Apr 5 10:06:10 2013 (r1667) +++ trunk/physmap.c Sun Apr 7 15:08:30 2013 (r1668) @@ -172,7 +172,7 @@ if (-1 == fd_mem) { /* Open the memory device UNCACHED. Important for MMIO. */ if (-1 == (fd_mem = open(MEM_DEV, O_RDWR | O_SYNC))) { - perror("Critical error: open(" MEM_DEV ")"); + msg_perr("Critical error: open(" MEM_DEV "): %s\n", strerror(errno)); exit(2); } } @@ -192,8 +192,7 @@ if (-1 == fd_mem_cached) { /* Open the memory device CACHED. */ if (-1 == (fd_mem_cached = open(MEM_DEV, O_RDWR))) { - msg_perr("Critical error: open(" MEM_DEV "): %s", - strerror(errno)); + msg_perr("Critical error: open(" MEM_DEV "): %s\n", strerror(errno)); exit(2); } } @@ -250,7 +249,7 @@ descr = "memory"; msg_perr("Error accessing %s, 0x%lx bytes at 0x%08lx\n", descr, (unsigned long)len, phys_addr); - perror(MEM_DEV " mmap failed"); + msg_perr(MEM_DEV " mmap failed: %s\n", strerror(errno)); #ifdef __linux__ if (EINVAL == errno) { msg_perr("In Linux this error can be caused by the CONFIG_NONPROMISC_DEVMEM (<2.6.27),\n"); @@ -302,7 +301,7 @@ msr_t msr = { 0xffffffff, 0xffffffff }; if (lseek(fd_msr, (off_t) addr, SEEK_SET) == -1) { - perror("Could not lseek() to MSR"); + msg_perr("Could not lseek() MSR: %s\n", strerror(errno)); close(fd_msr); exit(1); } @@ -315,7 +314,7 @@ if (errno != EIO) { // A severe error. - perror("Could not read() MSR"); + msg_perr("Could not read() MSR: %s\n", strerror(errno)); close(fd_msr); exit(1); } @@ -330,13 +329,13 @@ buf[1] = msr.hi; if (lseek(fd_msr, (off_t) addr, SEEK_SET) == -1) { - perror("Could not lseek() to MSR"); + msg_perr("Could not lseek() MSR: %s\n", strerror(errno)); close(fd_msr); exit(1); } if (write(fd_msr, buf, 8) != 8 && errno != EIO) { - perror("Could not write() MSR"); + msg_perr("Could not write() MSR: %s\n", strerror(errno)); close(fd_msr); exit(1); } @@ -362,7 +361,7 @@ fd_msr = open(msrfilename, O_RDWR); if (fd_msr < 0) { - perror("Error while opening /dev/cpu/0/msr"); + msg_perr("Error while opening %s: %s\n", msrfilename, strerror(errno)); msg_pinfo("Did you run 'modprobe msr'?\n"); return -1; } @@ -404,7 +403,7 @@ args.msr = addr; if (ioctl(fd_msr, CPU_RDMSR, &args) < 0) { - perror("CPU_RDMSR"); + msg_perr("Error while executing CPU_RDMSR ioctl: %s\n", strerror(errno)); close(fd_msr); exit(1); } @@ -423,7 +422,7 @@ args.data = (((uint64_t)msr.hi) << 32) | msr.lo; if (ioctl(fd_msr, CPU_WRMSR, &args) < 0) { - perror("CPU_WRMSR"); + msg_perr("Error while executing CPU_WRMSR ioctl: %s\n", strerror(errno)); close(fd_msr); exit(1); } @@ -445,7 +444,7 @@ fd_msr = open(msrfilename, O_RDWR); if (fd_msr < 0) { - perror("Error while opening /dev/cpu0"); + msg_perr("Error while opening %s: %s\n", msrfilename, strerror(errno)); msg_pinfo("Did you install ports/sysutils/devcpu?\n"); return -1; }

1 0

[PATCH 2/2] Add support for AMD Geode's MSR on OpenBSD.
by Stefan Tauner 07 Apr '13

07 Apr '13

NB: On other systems the code is not equal to the default implementation, but should not explode because setup_cpu_msr() returns an error and therefore no other functions should be called. --- The whole code needs some refactoring: - error handling for rdmsr (e.g. add msr_t *parameter and return int instead) - lots of duplicate code... Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- physmap.c | 94 ++++++++++++++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 84 insertions(+), 10 deletions(-) diff --git a/physmap.c b/physmap.c index 4ebfb06..f625b5a 100644 --- a/physmap.c +++ b/physmap.c @@ -282,6 +282,8 @@ void *physmap_try_ro(const char *descr, unsigned long phys_addr, size_t len) PHYSMAP_RO); } +/* MSR abstraction implementations for Linux, OpenBSD, FreeBSD/Dragonfly, OSX, libpayload + * and a non-working default implemenation on the bottom. See also hwaccess.h for some (re)declarations. */ #if defined(__i386__) || defined(__x86_64__) #ifdef __linux__ @@ -381,8 +383,83 @@ void cleanup_cpu_msr(void) /* Clear MSR file descriptor. */ fd_msr = -1; } -#else -#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__) +#elif defined(__OpenBSD__) /* This does only work for certain AMD Geode LX systems see amdmsr(4). */ +#include <sys/ioctl.h> +#include <machine/amdmsr.h> + +static int fd_msr = -1; + +msr_t rdmsr(int addr) +{ + amdmsr_req args; + + msr_t msr = { 0xffffffff, 0xffffffff }; + + args.addr = (uint32_t)addr; + + if (ioctl(fd_msr, RDMSR, &args) < 0) { + msg_perr("Error while executing RDMSR ioctl: %s\n", strerror(errno)); + close(fd_msr); + exit(1); + } + + msr.lo = args.val & 0xffffffff; + msr.hi = args.val >> 32; + + return msr; +} + +int wrmsr(int addr, msr_t msr) +{ + cpu_msr_args_t args; + + args.msr = addr; + args.val = (((uint64_t)msr.hi) << 32) | msr.lo; + + if (ioctl(fd_msr, WRMSR, &args) < 0) { + msg_perr("Error while executing WRMSR ioctl: %s\n", strerror(errno)); + close(fd_msr); + exit(1); + } + + return 0; +} + +int setup_cpu_msr(int cpu) +{ + char msrfilename[64]; + memset(msrfilename, 0, sizeof(msrfilename)); + snprintf(msrfilename, sizeof(msrfilename), "/dev/amdmsr%d", cpu); + + if (fd_msr != -1) { + msg_pinfo("MSR was already initialized\n"); + return -1; + } + + fd_msr = open(msrfilename, O_RDWR); + + if (fd_msr < 0) { + msg_perr("Error while opening %s: %s\n", msrfilename, strerror(errno)); + return -1; + } + + return 0; +} + +void cleanup_cpu_msr(void) +{ + if (fd_msr == -1) { + msg_pinfo("No MSR initialized.\n"); + return; + } + + close(fd_msr); + + /* Clear MSR file descriptor. */ + fd_msr = -1; +} + +#elif defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || defined(__DragonFly__) #include <sys/ioctl.h> typedef struct { @@ -465,9 +542,7 @@ void cleanup_cpu_msr(void) fd_msr = -1; } -#else - -#if defined(__MACH__) && defined(__APPLE__) +#elif defined(__MACH__) && defined(__APPLE__) int setup_cpu_msr(int cpu) { // Always succeed for now @@ -494,6 +569,7 @@ int libpayload_wrmsr(int addr, msr_t msr) return 0; } #else +/* default MSR implementation */ msr_t rdmsr(int addr) { msr_t ret = { 0xffffffff, 0xffffffff }; @@ -516,9 +592,7 @@ void cleanup_cpu_msr(void) { // Nothing, yet. } -#endif -#endif -#endif -#else +#endif // OS switches for MSR code +#else // x86 /* Does MSR exist on non-x86 architectures? */ -#endif +#endif // arch switches for MSR code -- Kind regards, Stefan Tauner

1 0

[PATCH 1/2] Get rid of perror().
by Stefan Tauner 07 Apr '13

07 Apr '13

It prints to stderr and that's not what we want necesserily; using msg_*err gives us more control. Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> --- cli_output.c | 2 +- flashrom.c | 9 +++++---- physmap.c | 23 +++++++++++------------ 3 files changed, 17 insertions(+), 17 deletions(-) diff --git a/cli_output.c b/cli_output.c index 54b09a6..476b2bf 100644 --- a/cli_output.c +++ b/cli_output.c @@ -50,7 +50,7 @@ int open_logfile(const char * const filename) return 1; } if ((logfile = fopen(filename, "w")) == NULL) { - perror(filename); + msg_gerr("Error: opening log file \"%s\" failed: %s\n", filename, strerror(errno)); return 1; } return 0; diff --git a/flashrom.c b/flashrom.c index 14bb1b3..c11f723 100644 --- a/flashrom.c +++ b/flashrom.c @@ -29,6 +29,7 @@ #endif #include <string.h> #include <stdlib.h> +#include <errno.h> #include <ctype.h> #include <getopt.h> #if HAVE_UTSNAME == 1 @@ -1158,11 +1159,11 @@ int read_buf_from_file(unsigned char *buf, unsigned long size, struct stat image_stat; if ((image = fopen(filename, "rb")) == NULL) { - perror(filename); + msg_gerr("Error: opening file \"%s\" failed: %s\n", filename, strerror(errno)); return 1; } if (fstat(fileno(image), &image_stat) != 0) { - perror(filename); + msg_gerr("Error: getting metadata of file \"%s\" failed: %s\n", filename, strerror(errno)); fclose(image); return 1; } @@ -1174,7 +1175,7 @@ int read_buf_from_file(unsigned char *buf, unsigned long size, } numbytes = fread(buf, 1, size, image); if (fclose(image)) { - perror(filename); + msg_gerr("Error: closing file \"%s\" failed: %s\n", filename, strerror(errno)); return 1; } if (numbytes != size) { @@ -1196,7 +1197,7 @@ int write_buf_to_file(unsigned char *buf, unsigned long size, return 1; } if ((image = fopen(filename, "wb")) == NULL) { - perror(filename); + msg_gerr("Error: opening file \"%s\" failed: %s\n", filename, strerror(errno)); return 1; } diff --git a/physmap.c b/physmap.c index 5aa9874..4ebfb06 100644 --- a/physmap.c +++ b/physmap.c @@ -172,7 +172,7 @@ static void *sys_physmap_rw_uncached(unsigned long phys_addr, size_t len) if (-1 == fd_mem) { /* Open the memory device UNCACHED. Important for MMIO. */ if (-1 == (fd_mem = open(MEM_DEV, O_RDWR | O_SYNC))) { - perror("Critical error: open(" MEM_DEV ")"); + msg_perr("Critical error: open(" MEM_DEV "): %s\n", strerror(errno)); exit(2); } } @@ -192,8 +192,7 @@ static void *sys_physmap_ro_cached(unsigned long phys_addr, size_t len) if (-1 == fd_mem_cached) { /* Open the memory device CACHED. */ if (-1 == (fd_mem_cached = open(MEM_DEV, O_RDWR))) { - msg_perr("Critical error: open(" MEM_DEV "): %s", - strerror(errno)); + msg_perr("Critical error: open(" MEM_DEV "): %s\n", strerror(errno)); exit(2); } } @@ -250,7 +249,7 @@ static void *physmap_common(const char *descr, unsigned long phys_addr, descr = "memory"; msg_perr("Error accessing %s, 0x%lx bytes at 0x%08lx\n", descr, (unsigned long)len, phys_addr); - perror(MEM_DEV " mmap failed"); + msg_perr(MEM_DEV " mmap failed: %s\n", strerror(errno)); #ifdef __linux__ if (EINVAL == errno) { msg_perr("In Linux this error can be caused by the CONFIG_NONPROMISC_DEVMEM (<2.6.27),\n"); @@ -302,7 +301,7 @@ msr_t rdmsr(int addr) msr_t msr = { 0xffffffff, 0xffffffff }; if (lseek(fd_msr, (off_t) addr, SEEK_SET) == -1) { - perror("Could not lseek() to MSR"); + msg_perr("Could not lseek() MSR: %s\n", strerror(errno)); close(fd_msr); exit(1); } @@ -315,7 +314,7 @@ msr_t rdmsr(int addr) if (errno != EIO) { // A severe error. - perror("Could not read() MSR"); + msg_perr("Could not read() MSR: %s\n", strerror(errno)); close(fd_msr); exit(1); } @@ -330,13 +329,13 @@ int wrmsr(int addr, msr_t msr) buf[1] = msr.hi; if (lseek(fd_msr, (off_t) addr, SEEK_SET) == -1) { - perror("Could not lseek() to MSR"); + msg_perr("Could not lseek() MSR: %s\n", strerror(errno)); close(fd_msr); exit(1); } if (write(fd_msr, buf, 8) != 8 && errno != EIO) { - perror("Could not write() MSR"); + msg_perr("Could not write() MSR: %s\n", strerror(errno)); close(fd_msr); exit(1); } @@ -362,7 +361,7 @@ int setup_cpu_msr(int cpu) fd_msr = open(msrfilename, O_RDWR); if (fd_msr < 0) { - perror("Error while opening /dev/cpu/0/msr"); + msg_perr("Error while opening %s: %s\n", msrfilename, strerror(errno)); msg_pinfo("Did you run 'modprobe msr'?\n"); return -1; } @@ -404,7 +403,7 @@ msr_t rdmsr(int addr) args.msr = addr; if (ioctl(fd_msr, CPU_RDMSR, &args) < 0) { - perror("CPU_RDMSR"); + msg_perr("Error while executing CPU_RDMSR ioctl: %s\n", strerror(errno)); close(fd_msr); exit(1); } @@ -423,7 +422,7 @@ int wrmsr(int addr, msr_t msr) args.data = (((uint64_t)msr.hi) << 32) | msr.lo; if (ioctl(fd_msr, CPU_WRMSR, &args) < 0) { - perror("CPU_WRMSR"); + msg_perr("Error while executing CPU_WRMSR ioctl: %s\n", strerror(errno)); close(fd_msr); exit(1); } @@ -445,7 +444,7 @@ int setup_cpu_msr(int cpu) fd_msr = open(msrfilename, O_RDWR); if (fd_msr < 0) { - perror("Error while opening /dev/cpu0"); + msg_perr("Error while opening %s: %s\n", msrfilename, strerror(errno)); msg_pinfo("Did you install ports/sysutils/devcpu?\n"); return -1; } -- Kind regards, Stefan Tauner

1 0

[PATCH 3/3] udelay.c: usleep() not found in MinGW, used Sleep()
by Maksim Kuleshov 05 Apr '13

05 Apr '13

>From 62ffe98744aba140e5959635abb46c32a47887d2 Mon Sep 17 00:00:00 2001 From: Maksim Kuleshov <mmcx(a)mail.ru> Date: Mon, 1 Apr 2013 19:03:43 +0400 Subject: [PATCH 3/3] udelay.c: usleep() not found in MinGW, used Sleep() Signed-off-by: Maksim Kuleshov <mmcx(a)mail.ru> --- udelay.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/udelay.c b/udelay.c index 9f5e562..e589afb 100644 --- a/udelay.c +++ b/udelay.c @@ -175,7 +175,11 @@ void internal_delay(int usecs) * be so precise. */ if (usecs > 1000000) { +#ifdef _WIN32 + Sleep((usecs + 999) / 1000); +#else usleep(usecs); +#endif } else { myusec_delay(usecs); } -- 1.7.10.4

5 7

[PATCH 2/3] serprog.c: usleep() not found in MinGW, replaced to internal_delay()
by Maksim Kuleshov 05 Apr '13

05 Apr '13

>From 845f59d1aab099ccfe8536adb438371207c65aed Mon Sep 17 00:00:00 2001 From: Maksim Kuleshov <mmcx(a)mail.ru> Date: Mon, 1 Apr 2013 18:56:24 +0400 Subject: [PATCH 2/3] serprog.c: usleep() not found in MinGW, replaced to internal_delay() Signed-off-by: Maksim Kuleshov <mmcx(a)mail.ru> --- serprog.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/serprog.c b/serprog.c index c36c93d..5d1eea4 100644 --- a/serprog.c +++ b/serprog.c @@ -130,7 +130,7 @@ static int sp_sync_read_timeout(unsigned int loops, unsigned char *c) msg_perr("read: %s\n", strerror(errno)); return -1; } - usleep(1000); /* 1ms units */ + internal_delay(1000); /* 1ms units */ } return 1; } @@ -157,7 +157,7 @@ static int sp_synchronize(void) goto err_out; } /* A second should be enough to get all the answers to the buffer */ - usleep(1000 * 1000); + internal_delay(1000 * 1000); sp_flush_incoming(); /* Then try up to 8 times to send syncnop and get the correct special * -- 1.7.10.4

3 2

[PATCH 1/3] buspirate_spi.c: usleep() not found in MinGW, replaced to internal_delay()
by Maksim Kuleshov 05 Apr '13

05 Apr '13

>From d831258e8d7a3e3821d605703f11e72ef022d56f Mon Sep 17 00:00:00 2001 From: Maksim Kuleshov <mmcx(a)mail.ru> Date: Mon, 1 Apr 2013 18:56:07 +0400 Subject: [PATCH 1/3] buspirate_spi.c: usleep() not found in MinGW, replaced to internal_delay() Signed-off-by: Maksim Kuleshov <mmcx(a)mail.ru> --- buspirate_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/buspirate_spi.c b/buspirate_spi.c index d2ebc75..64128dd 100644 --- a/buspirate_spi.c +++ b/buspirate_spi.c @@ -286,7 +286,7 @@ int buspirate_spi_init(void) /* The Bus Pirate can't handle UART input buffer overflow in BBIO mode, and sending a sequence * of 0x00 too fast apparently triggers such an UART input buffer overflow. */ - usleep(10000); + internal_delay(10000); } /* We know that 20 commands of \0 should elicit at least one BBIO1 response. */ if ((ret = buspirate_wait_for_string(bp_commbuf, "BBIO"))) -- 1.7.10.4

2 1

[commit] r1667 - trunk
by repository service 05 Apr '13

05 Apr '13

Author: hailfinger Date: Fri Apr 5 10:06:10 2013 New Revision: 1667 URL: http://flashrom.org/trac/flashrom/changeset/1667 Log: usleep() is not found in all versions of MinGW, use Sleep() on Windows. Handle long sleeps on non-Windows correctly. Signed-off-by: Maksim Kuleshov <mmcx(a)mail.ru> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Acked-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> Modified: trunk/buspirate_spi.c trunk/programmer.h trunk/udelay.c Modified: trunk/buspirate_spi.c ============================================================================== --- trunk/buspirate_spi.c Mon Apr 1 21:34:53 2013 (r1666) +++ trunk/buspirate_spi.c Fri Apr 5 10:06:10 2013 (r1667) @@ -286,7 +286,7 @@ /* The Bus Pirate can't handle UART input buffer overflow in BBIO mode, and sending a sequence * of 0x00 too fast apparently triggers such an UART input buffer overflow. */ - usleep(10000); + internal_sleep(10000); } /* We know that 20 commands of \0 should elicit at least one BBIO1 response. */ if ((ret = buspirate_wait_for_string(bp_commbuf, "BBIO"))) Modified: trunk/programmer.h ============================================================================== --- trunk/programmer.h Mon Apr 1 21:34:53 2013 (r1666) +++ trunk/programmer.h Fri Apr 5 10:06:10 2013 (r1667) @@ -250,6 +250,7 @@ /* udelay.c */ void myusec_delay(int usecs); void myusec_calibrate_delay(void); +void internal_sleep(int usecs); void internal_delay(int usecs); #if CONFIG_INTERNAL == 1 Modified: trunk/udelay.c ============================================================================== --- trunk/udelay.c Mon Apr 1 21:34:53 2013 (r1666) +++ trunk/udelay.c Fri Apr 5 10:06:10 2013 (r1667) @@ -169,13 +169,23 @@ msg_pinfo("OK.\n"); } +/* Not very precise sleep. */ +void internal_sleep(int usecs) +{ +#ifdef _WIN32 + Sleep((usecs + 999) / 1000); +#else + sleep(usecs / 1000000); + usleep(usecs % 1000000); +#endif +} + +/* Precise delay. */ void internal_delay(int usecs) { - /* If the delay is >1 s, use usleep because timing does not need to - * be so precise. - */ + /* If the delay is >1 s, use internal_sleep because timing does not need to be so precise. */ if (usecs > 1000000) { - usleep(usecs); + internal_sleep(usecs); } else { myusec_delay(usecs); }

1 0

Report: MSI H77MA-G43 (MS-7756) V1.11 write
by dpcimanager＠users.sourceforge.net 05 Apr '13

05 Apr '13

flashrom v0.9.6.1-r1653 on Darwin 12.3.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.10, LLVM Clang 4.2 (clang-425.0.24), little endian Command line (5 args): ~/Downloads/DPCIManager/DPCIManager.app/Contents/MacOS/flashrom -VV -w /var/folders/5g/z9x4lc990c34292gzfltr3w40000gn/T/DPCIQYUSsh.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 411M loops per second, 10 myus = 9 us, 100 myus = 90 us, 1000 myus = 905 us, 10000 myus = 9483 us, 4 myus = 4 us, OK. Initializing internal programmer Mapping low megabyte at 0x00000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x00000400. No coreboot table found. DMI string system-manufacturer: "MSI" DMI string system-product-name: "MS-7756" DMI string system-version: "1.0" DMI string baseboard-manufacturer: "MSI" DMI string baseboard-product-name: "H77MA-G43 (MS-7756)" DMI string baseboard-version: "1.0" DMI string chassis-type: "Desktop" Found chipset "Intel H77" with PCI ID 8086:1e4a. This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode enabled 0xff600000/0xff200000 FWH decode enabled 0xff500000/0xff100000 FWH decode enabled 0xff400000/0xff000000 FWH decode enabled Maximum FWH chip size: 0x100000 bytes BIOS_CNTL = 0x09: BIOS Lock Enable: disabled, BIOS Write Enable: enabled Root Complex Register Block address = 0xfed1c000 GCS = 0xc61: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0xe008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 Warning: SPI Configuration Lockdown activated. Reading OPCODES... done OP Type Pre-OP op[0]: 0x02, write w/ addr, none op[1]: 0x3b, read w/ addr, none op[2]: 0x20, write w/ addr, none op[3]: 0x05, read w/o addr, none op[4]: 0x9f, read w/o addr, none op[5]: 0x01, write w/o addr, none op[6]: 0x00, read w/o addr, none op[7]: 0x00, read w/o addr, none Pre-OP 0: 0x06, Pre-OP 1: 0x00 0x06: 0x3f00 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=63, SME=0 0x08: 0x007fffc0 (FADDR) 0x50: 0x0000ffff (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff 0x54: 0x00000000 FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-write. 0x58: 0x07ff0200 FREG1: BIOS region (0x00200000-0x007fffff) is read-write. 0x5C: 0x01ff0001 FREG2: Management Engine region (0x00001000-0x001fffff) is read-write. 0x60: 0x00001fff FREG3: Gigabit Ethernet region is unused. 0x64: 0x00001fff FREG4: Platform Data region is unused. 0x74: 0x00000000 (PR0 is unused) 0x78: 0x00000000 (PR1 is unused) 0x7C: 0x00000000 (PR2 is unused) 0x80: 0x00000000 (PR3 is unused) 0x84: 0x00000000 (PR4 is unused) 0x90: 0xc0 (SSFS) SSFS: SCIP=0, FDONE=0, FCERR=0, AEL=0 0x91: 0xfc4010 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=0, SME=0, SCF=4 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05203b02 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00802005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) Reading flash descriptors mapped by the chipset via FDOC/FDOD... done. === Content Section === FLVALSIG 0x0ff0a55a FLMAP0 0x02040003 FLMAP1 0x12100206 FLMAP2 0x00210120 --- Details --- NR (Number of Regions): 3 FRBA (Flash Region Base Address): 0x040 NC (Number of Components): 1 FCBA (Flash Component Base Address): 0x030 ISL (ICH/PCH Strap Length): 18 FISBA/FPSBA (Flash ICH/PCH Strap Base Address): 0x100 NM (Number of Masters): 3 FMBA (Flash Master Base Address): 0x060 MSL/PSL (MCH/PROC Strap Length): 1 FMSBA (Flash MCH/PROC Strap Base Address): 0x200 === Component Section === FLCOMP 0x64900024 FLILL 0x00000000 --- Details --- Component 1 density: 8 MB Component 2 is not used. Read Clock Frequency: 20 MHz Read ID and Status Clock Freq.: 50 MHz Write and Erase Clock Freq.: 50 MHz Fast Read is supported. Fast Read Clock Frequency: 50 MHz No forbidden opcodes. === Region Section === FLREG0 0x00000000 FLREG1 0x07ff0200 FLREG2 0x01ff0001 FLREG3 0x00001fff --- Details --- Region 0 (Descr.) 0x00000000 - 0x00000fff Region 1 (BIOS ) 0x00200000 - 0x007fffff Region 2 (ME ) 0x00001000 - 0x001fffff Region 3 (GbE ) is unused. === Master Section === FLMSTR1 0xffff0000 FLMSTR2 0xffff0000 FLMSTR3 0xffff0118 --- Details --- Descr. BIOS ME GbE Platf. BIOS rw rw rw rw rw ME rw rw rw rw rw GbE rw rw rw rw rw Enabling hardware sequencing because some important opcode is locked. SPI Read Configuration: prefetching enabled, caching enabled, OK. The following protocols are supported: FWH, Programmer-specific. Probing for Programmer Opaque flash chip, 0 kB: Found 1 attached SPI flash chip with a density of 8192 kB. There is only one partition containing the whole address space (0x000000 - 0x7fffff). There are 2048 erase blocks with 4096 B each. Found Programmer flash chip "Opaque flash chip" (8192 kB, Programmer-specific) at physical address 0x0. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x4c, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x00, id2 0x08, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x4c, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x00, id2 0x08, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x4c, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xef, id2 0x21, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x00, id2 0x08, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x00, id2 0x08, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x25, id2 0xa2, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x00, id2 0x08, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x00, id2 0x08, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x4c, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x25, id2 0xa2, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x00, id2 0x08, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x00, id2 0x08, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x00, id2 0x08, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x00, id2 0x08, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x4c, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x00, id2 0x08, id1 parity violation, id1 is normal flash content, id2 is normal flash content Found Programmer flash chip "Opaque flash chip" (8192 kB, Programmer-specific). Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... Reading 8388608 bytes starting at 0x000000. done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:S, 0x001000-0x001fff:S, 0x002000-0x002fff:S, 0x003000-0x003fff:S, 0x004000-0x004fff:S, 0x005000-0x005fff:S, 0x006000-0x006fff:S, 0x007000-0x007fff:S, 0x008000-0x008fff:S, 0x009000-0x009fff:S, 0x00a000-0x00afff:S, 0x00b000-0x00bfff:S, 0x00c000-0x00cfff:S, 0x00d000-0x00dfff:S, 0x00e000-0x00efff:S, 0x00f000-0x00ffff:S, 0x010000-0x010fff:S, 0x011000-0x011fff:S, 0x012000-0x012fff:S, 0x013000-0x013fff:S, 0x014000-0x014fff:S, 0x015000-0x015fff:S, 0x016000-0x016fff:S, 0x017000-0x017fff:S, 0x018000-0x018fff:S, 0x019000-0x019fff:S, 0x01a000-0x01afff:S, 0x01b000-0x01bfff:S, 0x01c000-0x01cfff:S, 0x01d000-0x01dfff:S, 0x01e000-0x01efff:S, 0x01f000-0x01ffff:S, 0x020000-0x020fff:S, 0x021000-0x021fff:S, 0x022000-0x022fff:S, 0x023000-0x023fff:S, 0x024000-0x024fff:S, 0x025000-0x025fff:S, 0x026000-0x026fff:S, 0x027000-0x027fff:S, 0x028000-0x028fff:S, 0x029000-0x029fff:S, 0x02a000-0x02afff:S, 0x02b000-0x02bfff:S, 0x02c000-0x02cfff:S, 0x02d000-0x02dfff:S, 0x02e000-0x02efff:S, 0x02f000-0x02ffff:S, 0x030000-0x030fff:S, 0x031000-0x031fff:S, 0x032000-0x032fff:S, 0x033000-0x033fff:S, 0x034000-0x034fff:S, 0x035000-0x035fff:S, 0x036000-0x036fff:S, 0x037000-0x037fff:S, 0x038000-0x038fff:S, 0x039000-0x039fff:S, 0x03a000-0x03afff:S, 0x03b000-0x03bfff:S, 0x03c000-0x03cfff:S, 0x03d000-0x03dfff:S, 0x03e000-0x03efff:S, 0x03f000-0x03ffff:S, 0x040000-0x040fff:S, 0x041000-0x041fff:S, 0x042000-0x042fff:S, 0x043000-0x043fff:S, 0x044000-0x044fff:S, 0x045000-0x045fff:S, 0x046000-0x046fff:S, 0x047000-0x047fff:S, 0x048000-0x048fff:S, 0x049000-0x049fff:S, 0x04a000-0x04afff:S, 0x04b000-0x04bfff:S, 0x04c000-0x04cfff:S, 0x04d000-0x04dfff:S, 0x04e000-0x04efff:S, 0x04f000-0x04ffff:S, 0x050000-0x050fff:S, 0x051000-0x051fff:S, 0x052000-0x052fff:S, 0x053000-0x053fff:S, 0x054000-0x054fff:S, 0x055000-0x055fff:S, 0x056000-0x056fff:S, 0x057000-0x057fff:S, 0x058000-0x058fff:S, 0x059000-0x059fff:S, 0x05a000-0x05afff:S, 0x05b000-0x05bfff:S, 0x05c000-0x05cfff:S, 0x05d000-0x05dfff:S, 0x05e000-0x05efff:S, 0x05f000-0x05ffff:S, 0x060000-0x060fff:S, 0x061000-0x061fff:S, 0x062000-0x062fff:S, 0x063000-0x063fff:S, 0x064000-0x064fff:S, 0x065000-0x065fff:S, 0x066000-0x066fff:S, 0x067000-0x067fff:S, 0x068000-0x068fff:S, 0x069000-0x069fff:S, 0x06a000-0x06afff:S, 0x06b000-0x06bfff:S, 0x06c000-0x06cfff:S, 0x06d000-0x06dfff:S, 0x06e000-0x06efff:S, 0x06f000-0x06ffff:S, 0x070000-0x070fff:S, 0x071000-0x071fff:S, 0x072000-0x072fff:S, 0x073000-0x073fff:S, 0x074000-0x074fff:S, 0x075000-0x075fff:S, 0x076000-0x076fff:S, 0x077000-0x077fff:S, 0x078000-0x078fff:S, 0x079000-0x079fff:S, 0x07a000-0x07afff:S, 0x07b000-0x07bfff:S, 0x07c000-0x07cfff:S, 0x07d000-0x07dfff:S, 0x07e000-0x07efff:S, 0x07f000-0x07ffff:S, 0x080000-0x080fff:S, 0x081000-0x081fff:S, 0x082000-0x082fff:S, 0x083000-0x083fff:S, 0x084000-0x084fff:S, 0x085000-0x085fff:S, 0x086000-0x086fff:S, 0x087000-0x087fff:S, 0x088000-0x088fff:S, 0x089000-0x089fff:S, 0x08a000-0x08afff:S, 0x08b000-0x08bfff:S, 0x08c000-0x08cfff:S, 0x08d000-0x08dfff:S, 0x08e000-0x08efff:S, 0x08f000-0x08ffff:S, 0x090000-0x090fff:S, 0x091000-0x091fff:S, 0x092000-0x092fff:S, 0x093000-0x093fff:S, 0x094000-0x094fff:S, 0x095000-0x095fff:S, 0x096000-0x096fff:S, 0x097000-0x097fff:S, 0x098000-0x098fff:S, 0x099000-0x099fff:S, 0x09a000-0x09afff:S, 0x09b000-0x09bfff:S, 0x09c000-0x09cfff:S, 0x09d000-0x09dfff:S, 0x09e000-0x09efff:S, 0x09f000-0x09ffff:S, 0x0a0000-0x0a0fff:S, 0x0a1000-0x0a1fff:S, 0x0a2000-0x0a2fff:S, 0x0a3000-0x0a3fff:S, 0x0a4000-0x0a4fff:S, 0x0a5000-0x0a5fff:S, 0x0a6000-0x0a6fff:S, 0x0a7000-0x0a7fff:S, 0x0a8000-0x0a8fff:S, 0x0a9000-0x0a9fff:S, 0x0aa000-0x0aafff:S, 0x0ab000-0x0abfff:S, 0x0ac000-0x0acfff:S, 0x0ad000-0x0adfff:S, 0x0ae000-0x0aefff:S, 0x0af000-0x0affff:S, 0x0b0000-0x0b0fff:S, 0x0b1000-0x0b1fff:S, 0x0b2000-0x0b2fff:S, 0x0b3000-0x0b3fff:S, 0x0b4000-0x0b4fff:S, 0x0b5000-0x0b5fff:S, 0x0b6000-0x0b6fff:S, 0x0b7000-0x0b7fff:S, 0x0b8000-0x0b8fff:S, 0x0b9000-0x0b9fff:S, 0x0ba000-0x0bafff:S, 0x0bb000-0x0bbfff:S, 0x0bc000-0x0bcfff:S, 0x0bd000-0x0bdfff:S, 0x0be000-0x0befff:S, 0x0bf000-0x0bffff:S, 0x0c0000-0x0c0fff:S, 0x0c1000-0x0c1fff:S, 0x0c2000-0x0c2fff:S, 0x0c3000-0x0c3fff:S, 0x0c4000-0x0c4fff:S, 0x0c5000-0x0c5fff:S, 0x0c6000-0x0c6fff:S, 0x0c7000-0x0c7fff:S, 0x0c8000-0x0c8fff:S, 0x0c9000-0x0c9fff:S, 0x0ca000-0x0cafff:S, 0x0cb000-0x0cbfff:S, 0x0cc000-0x0ccfff:S, 0x0cd000-0x0cdfff:S, 0x0ce000-0x0cefff:S, 0x0cf000-0x0cffff:S, 0x0d0000-0x0d0fff:S, 0x0d1000-0x0d1fff:S, 0x0d2000-0x0d2fff:S, 0x0d3000-0x0d3fff:S, 0x0d4000-0x0d4fff:S, 0x0d5000-0x0d5fff:S, 0x0d6000-0x0d6fff:S, 0x0d7000-0x0d7fff:S, 0x0d8000-0x0d8fff:S, 0x0d9000-0x0d9fff:S, 0x0da000-0x0dafff:S, 0x0db000-0x0dbfff:S, 0x0dc000-0x0dcfff:S, 0x0dd000-0x0ddfff:S, 0x0de000-0x0defff:S, 0x0df000-0x0dffff:S, 0x0e0000-0x0e0fff:S, 0x0e1000-0x0e1fff:S, 0x0e2000-0x0e2fff:S, 0x0e3000-0x0e3fff:S, 0x0e4000-0x0e4fff:S, 0x0e5000-0x0e5fff:S, 0x0e6000-0x0e6fff:S, 0x0e7000-0x0e7fff:S, 0x0e8000-0x0e8fff:S, 0x0e9000-0x0e9fff:S, 0x0ea000-0x0eafff:S, 0x0eb000-0x0ebfff:S, 0x0ec000-0x0ecfff:S, 0x0ed000-0x0edfff:S, 0x0ee000-0x0eefff:S, 0x0ef000-0x0effff:S, 0x0f0000-0x0f0fff:S, 0x0f1000-0x0f1fff:S, 0x0f2000-0x0f2fff:S, 0x0f3000-0x0f3fff:S, 0x0f4000-0x0f4fff:S, 0x0f5000-0x0f5fff:S, 0x0f6000-0x0f6fff:S, 0x0f7000-0x0f7fff:S, 0x0f8000-0x0f8fff:S, 0x0f9000-0x0f9fff:S, 0x0fa000-0x0fafff:S, 0x0fb000-0x0fbfff:S, 0x0fc000-0x0fcfff:S, 0x0fd000-0x0fdfff:S, 0x0fe000-0x0fefff:S, 0x0ff000-0x0fffff:S, 0x100000-0x100fff:S, 0x101000-0x101fff:S, 0x102000-0x102fff:S, 0x103000-0x103fff:S, 0x104000-0x104fff:S, 0x105000-0x105fff:S, 0x106000-0x106fff:S, 0x107000-0x107fff:S, 0x108000-0x108fff:S, 0x109000-0x109fff:S, 0x10a000-0x10afff:S, 0x10b000-0x10bfff:S, 0x10c000-0x10cfff:S, 0x10d000-0x10dfff:S, 0x10e000-0x10efff:S, 0x10f000-0x10ffff:S, 0x110000-0x110fff:S, 0x111000-0x111fff:S, 0x112000-0x112fff:S, 0x113000-0x113fff:S, 0x114000-0x114fff:S, 0x115000-0x115fff:S, 0x116000-0x116fff:S, 0x117000-0x117fff:S, 0x118000-0x118fff:S, 0x119000-0x119fff:S, 0x11a000-0x11afff:S, 0x11b000-0x11bfff:S, 0x11c000-0x11cfff:S, 0x11d000-0x11dfff:S, 0x11e000-0x11efff:S, 0x11f000-0x11ffff:S, 0x120000-0x120fff:S, 0x121000-0x121fff:S, 0x122000-0x122fff:S, 0x123000-0x123fff:S, 0x124000-0x124fff:S, 0x125000-0x125fff:S, 0x126000-0x126fff:S, 0x127000-0x127fff:S, 0x128000-0x128fff:S, 0x129000-0x129fff:S, 0x12a000-0x12afff:S, 0x12b000-0x12bfff:S, 0x12c000-0x12cfff:S, 0x12d000-0x12dfff:S, 0x12e000-0x12efff:S, 0x12f000-0x12ffff:S, 0x130000-0x130fff:S, 0x131000-0x131fff:S, 0x132000-0x132fff:S, 0x133000-0x133fff:S, 0x134000-0x134fff:S, 0x135000-0x135fff:S, 0x136000-0x136fff:S, 0x137000-0x137fff:S, 0x138000-0x138fff:S, 0x139000-0x139fff:S, 0x13a000-0x13afff:S, 0x13b000-0x13bfff:S, 0x13c000-0x13cfff:S, 0x13d000-0x13dfff:S, 0x13e000-0x13efff:S, 0x13f000-0x13ffff:S, 0x140000-0x140fff:S, 0x141000-0x141fff:S, 0x142000-0x142fff:S, 0x143000-0x143fff:S, 0x144000-0x144fff:S, 0x145000-0x145fff:S, 0x146000-0x146fff:S, 0x147000-0x147fff:S, 0x148000-0x148fff:S, 0x149000-0x149fff:S, 0x14a000-0x14afff:S, 0x14b000-0x14bfff:S, 0x14c000-0x14cfff:S, 0x14d000-0x14dfff:S, 0x14e000-0x14efff:S, 0x14f000-0x14ffff:S, 0x150000-0x150fff:S, 0x151000-0x151fff:S, 0x152000-0x152fff:S, 0x153000-0x153fff:S, 0x154000-0x154fff:S, 0x155000-0x155fff:S, 0x156000-0x156fff:S, 0x157000-0x157fff:S, 0x158000-0x158fff:S, 0x159000-0x159fff:S, 0x15a000-0x15afff:S, 0x15b000-0x15bfff:S, 0x15c000-0x15cfff:S, 0x15d000-0x15dfff:S, 0x15e000-0x15efff:S, 0x15f000-0x15ffff:S, 0x160000-0x160fff:S, 0x161000-0x161fff:S, 0x162000-0x162fff:S, 0x163000-0x163fff:S, 0x164000-0x164fff:S, 0x165000-0x165fff:S, 0x166000-0x166fff:S, 0x167000-0x167fff:S, 0x168000-0x168fff:S, 0x169000-0x169fff:S, 0x16a000-0x16afff:S, 0x16b000-0x16bfff:S, 0x16c000-0x16cfff:S, 0x16d000-0x16dfff:S, 0x16e000-0x16efff:S, 0x16f000-0x16ffff:S, 0x170000-0x170fff:S, 0x171000-0x171fff:S, 0x172000-0x172fff:S, 0x173000-0x173fff:S, 0x174000-0x174fff:S, 0x175000-0x175fff:S, 0x176000-0x176fff:S, 0x177000-0x177fff:S, 0x178000-0x178fff:S, 0x179000-0x179fff:S, 0x17a000-0x17afff:S, 0x17b000-0x17bfff:S, 0x17c000-0x17cfff:S, 0x17d000-0x17dfff:S, 0x17e000-0x17efff:S, 0x17f000-0x17ffff:S, 0x180000-0x180fff:S, 0x181000-0x181fff:S, 0x182000-0x182fff:S, 0x183000-0x183fff:S, 0x184000-0x184fff:S, 0x185000-0x185fff:S, 0x186000-0x186fff:S, 0x187000-0x187fff:S, 0x188000-0x188fff:S, 0x189000-0x189fff:S, 0x18a000-0x18afff:S, 0x18b000-0x18bfff:S, 0x18c000-0x18cfff:S, 0x18d000-0x18dfff:S, 0x18e000-0x18efff:S, 0x18f000-0x18ffff:S, 0x190000-0x190fff:S, 0x191000-0x191fff:S, 0x192000-0x192fff:S, 0x193000-0x193fff:S, 0x194000-0x194fff:S, 0x195000-0x195fff:S, 0x196000-0x196fff:S, 0x197000-0x197fff:S, 0x198000-0x198fff:S, 0x199000-0x199fff:S, 0x19a000-0x19afff:S, 0x19b000-0x19bfff:S, 0x19c000-0x19cfff:S, 0x19d000-0x19dfff:S, 0x19e000-0x19efff:S, 0x19f000-0x19ffff:S, 0x1a0000-0x1a0fff:S, 0x1a1000-0x1a1fff:S, 0x1a2000-0x1a2fff:S, 0x1a3000-0x1a3fff:S, 0x1a4000-0x1a4fff:S, 0x1a5000-0x1a5fff:S, 0x1a6000-0x1a6fff:S, 0x1a7000-0x1a7fff:S, 0x1a8000-0x1a8fff:S, 0x1a9000-0x1a9fff:S, 0x1aa000-0x1aafff:S, 0x1ab000-0x1abfff:S, 0x1ac000-0x1acfff:S, 0x1ad000-0x1adfff:S, 0x1ae000-0x1aefff:S, 0x1af000-0x1affff:S, 0x1b0000-0x1b0fff:S, 0x1b1000-0x1b1fff:S, 0x1b2000-0x1b2fff:S, 0x1b3000-0x1b3fff:S, 0x1b4000-0x1b4fff:S, 0x1b5000-0x1b5fff:S, 0x1b6000-0x1b6fff:S, 0x1b7000-0x1b7fff:S, 0x1b8000-0x1b8fff:S, 0x1b9000-0x1b9fff:S, 0x1ba000-0x1bafff:S, 0x1bb000-0x1bbfff:S, 0x1bc000-0x1bcfff:S, 0x1bd000-0x1bdfff:S, 0x1be000-0x1befff:S, 0x1bf000-0x1bffff:S, 0x1c0000-0x1c0fff:S, 0x1c1000-0x1c1fff:S, 0x1c2000-0x1c2fff:S, 0x1c3000-0x1c3fff:S, 0x1c4000-0x1c4fff:S, 0x1c5000-0x1c5fff:S, 0x1c6000-0x1c6fff:S, 0x1c7000-0x1c7fff:S, 0x1c8000-0x1c8fff:S, 0x1c9000-0x1c9fff:S, 0x1ca000-0x1cafff:S, 0x1cb000-0x1cbfff:S, 0x1cc000-0x1ccfff:S, 0x1cd000-0x1cdfff:S, 0x1ce000-0x1cefff:S, 0x1cf000-0x1cffff:S, 0x1d0000-0x1d0fff:S, 0x1d1000-0x1d1fff:S, 0x1d2000-0x1d2fff:S, 0x1d3000-0x1d3fff:S, 0x1d4000-0x1d4fff:S, 0x1d5000-0x1d5fff:S, 0x1d6000-0x1d6fff:S, 0x1d7000-0x1d7fff:S, 0x1d8000-0x1d8fff:S, 0x1d9000-0x1d9fff:S, 0x1da000-0x1dafff:S, 0x1db000-0x1dbfff:S, 0x1dc000-0x1dcfff:S, 0x1dd000-0x1ddfff:S, 0x1de000-0x1defff:S, 0x1df000-0x1dffff:S, 0x1e0000-0x1e0fff:S, 0x1e1000-0x1e1fff:S, 0x1e2000-0x1e2fff:S, 0x1e3000-0x1e3fff:S, 0x1e4000-0x1e4fff:S, 0x1e5000-0x1e5fff:S, 0x1e6000-0x1e6fff:S, 0x1e7000-0x1e7fff:S, 0x1e8000-0x1e8fff:S, 0x1e9000-0x1e9fff:S, 0x1ea000-0x1eafff:S, 0x1eb000-0x1ebfff:S, 0x1ec000-0x1ecfff:S, 0x1ed000-0x1edfff:S, 0x1ee000-0x1eefff:S, 0x1ef000-0x1effff:S, 0x1f0000-0x1f0fff:S, 0x1f1000-0x1f1fff:S, 0x1f2000-0x1f2fff:S, 0x1f3000-0x1f3fff:S, 0x1f4000-0x1f4fff:S, 0x1f5000-0x1f5fff:S, 0x1f6000-0x1f6fff:S, 0x1f7000-0x1f7fff:S, 0x1f8000-0x1f8fff:S, 0x1f9000-0x1f9fff:S, 0x1fa000-0x1fafff:S, 0x1fb000-0x1fbfff:S, 0x1fc000-0x1fcfff:S, 0x1fd000-0x1fdfff:S, 0x1fe000-0x1fefff:S, 0x1ff000-0x1fffff:S, 0x200000-0x200fff:S, 0x201000-0x201fff:S, 0x202000-0x202fff:S, 0x203000-0x203fff:S, 0x204000-0x204fff:S, 0x205000-0x205fff:S, 0x206000-0x206fff:S, 0x207000-0x207fff:S, 0x208000-0x208fff:S, 0x209000-0x209fff:S, 0x20a000-0x20afff:S, 0x20b000-0x20bfff:S, 0x20c000-0x20cfff:S, 0x20d000-0x20dfff:S, 0x20e000-0x20efff:S, 0x20f000-0x20ffff:S, 0x210000-0x210fff:S, 0x211000-0x211fff:S, 0x212000-0x212fff:S, 0x213000-0x213fff:S, 0x214000-0x214fff:S, 0x215000-0x215fff:S, 0x216000-0x216fff:S, 0x217000-0x217fff:S, 0x218000-0x218fff:S, 0x219000-0x219fff:S, 0x21a000-0x21afff:S, 0x21b000-0x21bfff:S, 0x21c000-0x21cfff:S, 0x21d000-0x21dfff:S, 0x21e000-0x21efff:S, 0x21f000-0x21ffff:S, 0x220000-0x220fff:S, 0x221000-0x221fff:S, 0x222000-0x222fff:S, 0x223000-0x223fff:S, 0x224000-0x224fff:S, 0x225000-0x225fff:S, 0x226000-0x226fff:S, 0x227000-0x227fff:S, 0x228000-0x228fff:S, 0x229000-0x229fff:S, 0x22a000-0x22afff:S, 0x22b000-0x22bfff:S, 0x22c000-0x22cfff:S, 0x22d000-0x22dfff:S, 0x22e000-0x22efff:S, 0x22f000-0x22ffff:S, 0x230000-0x230fff:S, 0x231000-0x231fff:S, 0x232000-0x232fff:S, 0x233000-0x233fff:S, 0x234000-0x234fff:S, 0x235000-0x235fff:S, 0x236000-0x236fff:S, 0x237000-0x237fff:S, 0x238000-0x238fff:S, 0x239000-0x239fff:S, 0x23a000-0x23afff:S, 0x23b000-0x23bfff:S, 0x23c000-0x23cfff:S, 0x23d000-0x23dfff:S, 0x23e000-0x23efff:S, 0x23f000-0x23ffff:S, 0x240000-0x240fff:S, 0x241000-0x241fff:S, 0x242000-0x242fff:S, 0x243000-0x243fff:S, 0x244000-0x244fff:S, 0x245000-0x245fff:S, 0x246000-0x246fff:S, 0x247000-0x247fff:S, 0x248000-0x248fff:S, 0x249000-0x249fff:S, 0x24a000-0x24afff:S, 0x24b000-0x24bfff:S, 0x24c000-0x24cfff:S, 0x24d000-0x24dfff:S, 0x24e000-0x24efff:S, 0x24f000-0x24ffff:S, 0x250000-0x250fff:S, 0x251000-0x251fff:S, 0x252000-0x252fff:S, 0x253000-0x253fff:S, 0x254000-0x254fff:S, 0x255000-0x255fff:S, 0x256000-0x256fff:S, 0x257000-0x257fff:S, 0x258000-0x258fff:S, 0x259000-0x259fff:S, 0x25a000-0x25afff:S, 0x25b000-0x25bfff:S, 0x25c000-0x25cfff:S, 0x25d000-0x25dfff:S, 0x25e000-0x25efff:S, 0x25f000-0x25ffff:S, 0x260000-0x260fff:S, 0x261000-0x261fff:S, 0x262000-0x262fff:S, 0x263000-0x263fff:S, 0x264000-0x264fff:S, 0x265000-0x265fff:S, 0x266000-0x266fff:S, 0x267000-0x267fff:S, 0x268000-0x268fff:S, 0x269000-0x269fff:S, 0x26a000-0x26afff:S, 0x26b000-0x26bfff:S, 0x26c000-0x26cfff:S, 0x26d000-0x26dfff:S, 0x26e000-0x26efff:S, 0x26f000-0x26ffff:S, 0x270000-0x270fff:S, 0x271000-0x271fff:S, 0x272000-0x272fff:S, 0x273000-0x273fff:S, 0x274000-0x274fff:S, 0x275000-0x275fff:S, 0x276000-0x276fff:S, 0x277000-0x277fff:S, 0x278000-0x278fff:S, 0x279000-0x279fff:S, 0x27a000-0x27afff:S, 0x27b000-0x27bfff:S, 0x27c000-0x27cfff:S, 0x27d000-0x27dfff:S, 0x27e000-0x27efff:S, 0x27f000-0x27ffff:S, 0x280000-0x280fff:S, 0x281000-0x281fff:S, 0x282000-0x282fff:S, 0x283000-0x283fff:S, 0x284000-0x284fff:S, 0x285000-0x285fff:S, 0x286000-0x286fff:S, 0x287000-0x287fff:S, 0x288000-0x288fff:S, 0x289000-0x289fff:S, 0x28a000-0x28afff:S, 0x28b000-0x28bfff:S, 0x28c000-0x28cfff:S, 0x28d000-0x28dfff:S, 0x28e000-0x28efff:S, 0x28f000-0x28ffff:S, 0x290000-0x290fff:S, 0x291000-0x291fff:S, 0x292000-0x292fff:S, 0x293000-0x293fff:S, 0x294000-0x294fff:S, 0x295000-0x295fff:S, 0x296000-0x296fff:S, 0x297000-0x297fff:S, 0x298000-0x298fff:S, 0x299000-0x299fff:S, 0x29a000-0x29afff:S, 0x29b000-0x29bfff:S, 0x29c000-0x29cfff:S, 0x29d000-0x29dfff:S, 0x29e000-0x29efff:S, 0x29f000-0x29ffff:S, 0x2a0000-0x2a0fff:S, 0x2a1000-0x2a1fff:S, 0x2a2000-0x2a2fff:S, 0x2a3000-0x2a3fff:S, 0x2a4000-0x2a4fff:S, 0x2a5000-0x2a5fff:S, 0x2a6000-0x2a6fff:S, 0x2a7000-0x2a7fff:S, 0x2a8000-0x2a8fff:S, 0x2a9000-0x2a9fff:S, 0x2aa000-0x2aafff:S, 0x2ab000-0x2abfff:S, 0x2ac000-0x2acfff:S, 0x2ad000-0x2adfff:S, 0x2ae000-0x2aefff:S, 0x2af000-0x2affff:S, 0x2b0000-0x2b0fff:S, 0x2b1000-0x2b1fff:S, 0x2b2000-0x2b2fff:S, 0x2b3000-0x2b3fff:S, 0x2b4000-0x2b4fff:S, 0x2b5000-0x2b5fff:S, 0x2b6000-0x2b6fff:S, 0x2b7000-0x2b7fff:S, 0x2b8000-0x2b8fff:S, 0x2b9000-0x2b9fff:S, 0x2ba000-0x2bafff:S, 0x2bb000-0x2bbfff:S, 0x2bc000-0x2bcfff:S, 0x2bd000-0x2bdfff:S, 0x2be000-0x2befff:S, 0x2bf000-0x2bffff:S, 0x2c0000-0x2c0fff:S, 0x2c1000-0x2c1fff:S, 0x2c2000-0x2c2fff:S, 0x2c3000-0x2c3fff:S, 0x2c4000-0x2c4fff:S, 0x2c5000-0x2c5fff:S, 0x2c6000-0x2c6fff:S, 0x2c7000-0x2c7fff:S, 0x2c8000-0x2c8fff:S, 0x2c9000-0x2c9fff:S, 0x2ca000-0x2cafff:S, 0x2cb000-0x2cbfff:S, 0x2cc000-0x2ccfff:S, 0x2cd000-0x2cdfff:S, 0x2ce000-0x2cefff:S, 0x2cf000-0x2cffff:S, 0x2d0000-0x2d0fff:S, 0x2d1000-0x2d1fff:S, 0x2d2000-0x2d2fff:S, 0x2d3000-0x2d3fff:S, 0x2d4000-0x2d4fff:S, 0x2d5000-0x2d5fff:S, 0x2d6000-0x2d6fff:S, 0x2d7000-0x2d7fff:S, 0x2d8000-0x2d8fff:S, 0x2d9000-0x2d9fff:S, 0x2da000-0x2dafff:S, 0x2db000-0x2dbfff:S, 0x2dc000-0x2dcfff:S, 0x2dd000-0x2ddfff:S, 0x2de000-0x2defff:S, 0x2df000-0x2dffff:S, 0x2e0000-0x2e0fff:S, 0x2e1000-0x2e1fff:S, 0x2e2000-0x2e2fff:S, 0x2e3000-0x2e3fff:S, 0x2e4000-0x2e4fff:S, 0x2e5000-0x2e5fff:S, 0x2e6000-0x2e6fff:S, 0x2e7000-0x2e7fff:S, 0x2e8000-0x2e8fff:S, 0x2e9000-0x2e9fff:S, 0x2ea000-0x2eafff:S, 0x2eb000-0x2ebfff:S, 0x2ec000-0x2ecfff:S, 0x2ed000-0x2edfff:S, 0x2ee000-0x2eefff:S, 0x2ef000-0x2effff:S, 0x2f0000-0x2f0fff:S, 0x2f1000-0x2f1fff:S, 0x2f2000-0x2f2fff:S, 0x2f3000-0x2f3fff:S, 0x2f4000-0x2f4fff:S, 0x2f5000-0x2f5fff:S, 0x2f6000-0x2f6fff:S, 0x2f7000-0x2f7fff:S, 0x2f8000-0x2f8fff:S, 0x2f9000-0x2f9fff:S, 0x2fa000-0x2fafff:S, 0x2fb000-0x2fbfff:S, 0x2fc000-0x2fcfff:S, 0x2fd000-0x2fdfff:S, 0x2fe000-0x2fefff:S, 0x2ff000-0x2fffff:S, 0x300000-0x300fff:S, 0x301000-0x301fff:S, 0x302000-0x302fff:S, 0x303000-0x303fff:S, 0x304000-0x304fff:S, 0x305000-0x305fff:S, 0x306000-0x306fff:S, 0x307000-0x307fff:S, 0x308000-0x308fff:S, 0x309000-0x309fff:S, 0x30a000-0x30afff:S, 0x30b000-0x30bfff:S, 0x30c000-0x30cfff:S, 0x30d000-0x30dfff:S, 0x30e000-0x30efff:S, 0x30f000-0x30ffff:S, 0x310000-0x310fff:S, 0x311000-0x311fff:S, 0x312000-0x312fff:S, 0x313000-0x313fff:S, 0x314000-0x314fff:S, 0x315000-0x315fff:S, 0x316000-0x316fff:S, 0x317000-0x317fff:S, 0x318000-0x318fff:S, 0x319000-0x319fff:S, 0x31a000-0x31afff:S, 0x31b000-0x31bfff:S, 0x31c000-0x31cfff:S, 0x31d000-0x31dfff:S, 0x31e000-0x31efff:S, 0x31f000-0x31ffff:S, 0x320000-0x320fff:S, 0x321000-0x321fff:S, 0x322000-0x322fff:S, 0x323000-0x323fff:S, 0x324000-0x324fff:S, 0x325000-0x325fff:S, 0x326000-0x326fff:S, 0x327000-0x327fff:S, 0x328000-0x328fff:S, 0x329000-0x329fff:S, 0x32a000-0x32afff:S, 0x32b000-0x32bfff:S, 0x32c000-0x32cfff:S, 0x32d000-0x32dfff:S, 0x32e000-0x32efff:S, 0x32f000-0x32ffff:S, 0x330000-0x330fff:S, 0x331000-0x331fff:S, 0x332000-0x332fff:S, 0x333000-0x333fff:S, 0x334000-0x334fff:S, 0x335000-0x335fff:S, 0x336000-0x336fff:S, 0x337000-0x337fff:S, 0x338000-0x338fff:S, 0x339000-0x339fff:S, 0x33a000-0x33afff:S, 0x33b000-0x33bfff:S, 0x33c000-0x33cfff:S, 0x33d000-0x33dfff:S, 0x33e000-0x33efff:S, 0x33f000-0x33ffff:S, 0x340000-0x340fff:S, 0x341000-0x341fff:S, 0x342000-0x342fff:S, 0x343000-0x343fff:S, 0x344000-0x344fff:S, 0x345000-0x345fff:S, 0x346000-0x346fff:S, 0x347000-0x347fff:S, 0x348000-0x348fff:S, 0x349000-0x349fff:S, 0x34a000-0x34afff:S, 0x34b000-0x34bfff:S, 0x34c000-0x34cfff:S, 0x34d000-0x34dfff:S, 0x34e000-0x34efff:S, 0x34f000-0x34ffff:S, 0x350000-0x350fff:S, 0x351000-0x351fff:S, 0x352000-0x352fff:S, 0x353000-0x353fff:S, 0x354000-0x354fff:S, 0x355000-0x355fff:S, 0x356000-0x356fff:S, 0x357000-0x357fff:S, 0x358000-0x358fff:S, 0x359000-0x359fff:S, 0x35a000-0x35afff:S, 0x35b000-0x35bfff:S, 0x35c000-0x35cfff:S, 0x35d000-0x35dfff:S, 0x35e000-0x35efff:S, 0x35f000-0x35ffff:S, 0x360000-0x360fff:S, 0x361000-0x361fff:S, 0x362000-0x362fff:S, 0x363000-0x363fff:S, 0x364000-0x364fff:S, 0x365000-0x365fff:S, 0x366000-0x366fff:S, 0x367000-0x367fff:S, 0x368000-0x368fff:S, 0x369000-0x369fff:S, 0x36a000-0x36afff:S, 0x36b000-0x36bfff:S, 0x36c000-0x36cfff:S, 0x36d000-0x36dfff:S, 0x36e000-0x36efff:S, 0x36f000-0x36ffff:S, 0x370000-0x370fff:S, 0x371000-0x371fff:S, 0x372000-0x372fff:S, 0x373000-0x373fff:S, 0x374000-0x374fff:S, 0x375000-0x375fff:S, 0x376000-0x376fff:S, 0x377000-0x377fff:S, 0x378000-0x378fff:S, 0x379000-0x379fff:S, 0x37a000-0x37afff:S, 0x37b000-0x37bfff:S, 0x37c000-0x37cfff:S, 0x37d000-0x37dfff:S, 0x37e000-0x37efff:S, 0x37f000-0x37ffff:EErasing 4096 bytes starting at 0x37f000. HSFC used for block erasing: HSFC: FGO=1, FCYCLE=3, FDBC=63, SME=0 Reading 4096 bytes starting at 0x37f000. WWriting 4096 bytes starting at 0x37f000. , 0x380000-0x380fff:EErasing 4096 bytes starting at 0x380000. HSFC used for block erasing: HSFC: FGO=1, FCYCLE=3, FDBC=63, SME=0 Reading 4096 bytes starting at 0x380000. WWriting 4096 bytes starting at 0x380000. , 0x381000-0x381fff:EErasing 4096 bytes starting at 0x381000. HSFC used for block erasing: HSFC: FGO=1, FCYCLE=3, FDBC=63, SME=0 Reading 4096 bytes starting at 0x381000. WWriting 4096 bytes starting at 0x381000. , 0x382000-0x382fff:EErasing 4096 bytes starting at 0x382000. HSFC used for block erasing: HSFC: FGO=1, FCYCLE=3, FDBC=63, SME=0 Reading 4096 bytes starting at 0x382000. WWriting 4096 bytes starting at 0x382000. , 0x383000-0x383fff:S, 0x384000-0x384fff:S, 0x385000-0x385fff:S, 0x386000-0x386fff:S, 0x387000-0x387fff:S, 0x388000-0x388fff:S, 0x389000-0x389fff:S, 0x38a000-0x38afff:S, 0x38b000-0x38bfff:S, 0x38c000-0x38cfff:S, 0x38d000-0x38dfff:S, 0x38e000-0x38efff:S, 0x38f000-0x38ffff:S, 0x390000-0x390fff:S, 0x391000-0x391fff:S, 0x392000-0x392fff:S, 0x393000-0x393fff:S, 0x394000-0x394fff:S, 0x395000-0x395fff:S, 0x396000-0x396fff:S, 0x397000-0x397fff:S, 0x398000-0x398fff:S, 0x399000-0x399fff:S, 0x39a000-0x39afff:S, 0x39b000-0x39bfff:S, 0x39c000-0x39cfff:S, 0x39d000-0x39dfff:S, 0x39e000-0x39efff:S, 0x39f000-0x39ffff:S, 0x3a0000-0x3a0fff:S, 0x3a1000-0x3a1fff:S, 0x3a2000-0x3a2fff:S, 0x3a3000-0x3a3fff:S, 0x3a4000-0x3a4fff:S, 0x3a5000-0x3a5fff:S, 0x3a6000-0x3a6fff:S, 0x3a7000-0x3a7fff:S, 0x3a8000-0x3a8fff:S, 0x3a9000-0x3a9fff:S, 0x3aa000-0x3aafff:S, 0x3ab000-0x3abfff:S, 0x3ac000-0x3acfff:S, 0x3ad000-0x3adfff:S, 0x3ae000-0x3aefff:S, 0x3af000-0x3affff:S, 0x3b0000-0x3b0fff:S, 0x3b1000-0x3b1fff:S, 0x3b2000-0x3b2fff:S, 0x3b3000-0x3b3fff:S, 0x3b4000-0x3b4fff:S, 0x3b5000-0x3b5fff:S, 0x3b6000-0x3b6fff:S, 0x3b7000-0x3b7fff:S, 0x3b8000-0x3b8fff:S, 0x3b9000-0x3b9fff:S, 0x3ba000-0x3bafff:S, 0x3bb000-0x3bbfff:S, 0x3bc000-0x3bcfff:S, 0x3bd000-0x3bdfff:S, 0x3be000-0x3befff:S, 0x3bf000-0x3bffff:S, 0x3c0000-0x3c0fff:S, 0x3c1000-0x3c1fff:S, 0x3c2000-0x3c2fff:S, 0x3c3000-0x3c3fff:S, 0x3c4000-0x3c4fff:S, 0x3c5000-0x3c5fff:S, 0x3c6000-0x3c6fff:S, 0x3c7000-0x3c7fff:S, 0x3c8000-0x3c8fff:S, 0x3c9000-0x3c9fff:S, 0x3ca000-0x3cafff:S, 0x3cb000-0x3cbfff:S, 0x3cc000-0x3ccfff:S, 0x3cd000-0x3cdfff:S, 0x3ce000-0x3cefff:S, 0x3cf000-0x3cffff:S, 0x3d0000-0x3d0fff:S, 0x3d1000-0x3d1fff:S, 0x3d2000-0x3d2fff:S, 0x3d3000-0x3d3fff:S, 0x3d4000-0x3d4fff:S, 0x3d5000-0x3d5fff:S, 0x3d6000-0x3d6fff:S, 0x3d7000-0x3d7fff:S, 0x3d8000-0x3d8fff:S, 0x3d9000-0x3d9fff:S, 0x3da000-0x3dafff:S, 0x3db000-0x3dbfff:S, 0x3dc000-0x3dcfff:S, 0x3dd000-0x3ddfff:S, 0x3de000-0x3defff:S, 0x3df000-0x3dffff:S, 0x3e0000-0x3e0fff:S, 0x3e1000-0x3e1fff:S, 0x3e2000-0x3e2fff:S, 0x3e3000-0x3e3fff:S, 0x3e4000-0x3e4fff:S, 0x3e5000-0x3e5fff:S, 0x3e6000-0x3e6fff:S, 0x3e7000-0x3e7fff:S, 0x3e8000-0x3e8fff:S, 0x3e9000-0x3e9fff:S, 0x3ea000-0x3eafff:S, 0x3eb000-0x3ebfff:S, 0x3ec000-0x3ecfff:S, 0x3ed000-0x3edfff:S, 0x3ee000-0x3eefff:S, 0x3ef000-0x3effff:S, 0x3f0000-0x3f0fff:S, 0x3f1000-0x3f1fff:S, 0x3f2000-0x3f2fff:S, 0x3f3000-0x3f3fff:S, 0x3f4000-0x3f4fff:S, 0x3f5000-0x3f5fff:S, 0x3f6000-0x3f6fff:S, 0x3f7000-0x3f7fff:S, 0x3f8000-0x3f8fff:S, 0x3f9000-0x3f9fff:S, 0x3fa000-0x3fafff:S, 0x3fb000-0x3fbfff:S, 0x3fc000-0x3fcfff:S, 0x3fd000-0x3fdfff:S, 0x3fe000-0x3fefff:S, 0x3ff000-0x3fffff:S, 0x400000-0x400fff:S, 0x401000-0x401fff:S, 0x402000-0x402fff:S, 0x403000-0x403fff:S, 0x404000-0x404fff:S, 0x405000-0x405fff:S, 0x406000-0x406fff:S, 0x407000-0x407fff:S, 0x408000-0x408fff:S, 0x409000-0x409fff:S, 0x40a000-0x40afff:S, 0x40b000-0x40bfff:S, 0x40c000-0x40cfff:S, 0x40d000-0x40dfff:S, 0x40e000-0x40efff:S, 0x40f000-0x40ffff:S, 0x410000-0x410fff:S, 0x411000-0x411fff:S, 0x412000-0x412fff:S, 0x413000-0x413fff:S, 0x414000-0x414fff:S, 0x415000-0x415fff:S, 0x416000-0x416fff:S, 0x417000-0x417fff:S, 0x418000-0x418fff:S, 0x419000-0x419fff:S, 0x41a000-0x41afff:S, 0x41b000-0x41bfff:S, 0x41c000-0x41cfff:S, 0x41d000-0x41dfff:S, 0x41e000-0x41efff:S, 0x41f000-0x41ffff:S, 0x420000-0x420fff:S, 0x421000-0x421fff:S, 0x422000-0x422fff:S, 0x423000-0x423fff:S, 0x424000-0x424fff:S, 0x425000-0x425fff:S, 0x426000-0x426fff:S, 0x427000-0x427fff:S, 0x428000-0x428fff:S, 0x429000-0x429fff:S, 0x42a000-0x42afff:S, 0x42b000-0x42bfff:S, 0x42c000-0x42cfff:S, 0x42d000-0x42dfff:S, 0x42e000-0x42efff:S, 0x42f000-0x42ffff:S, 0x430000-0x430fff:S, 0x431000-0x431fff:S, 0x432000-0x432fff:S, 0x433000-0x433fff:S, 0x434000-0x434fff:S, 0x435000-0x435fff:S, 0x436000-0x436fff:S, 0x437000-0x437fff:S, 0x438000-0x438fff:S, 0x439000-0x439fff:S, 0x43a000-0x43afff:S, 0x43b000-0x43bfff:S, 0x43c000-0x43cfff:S, 0x43d000-0x43dfff:S, 0x43e000-0x43efff:S, 0x43f000-0x43ffff:S, 0x440000-0x440fff:S, 0x441000-0x441fff:S, 0x442000-0x442fff:S, 0x443000-0x443fff:S, 0x444000-0x444fff:S, 0x445000-0x445fff:S, 0x446000-0x446fff:S, 0x447000-0x447fff:S, 0x448000-0x448fff:S, 0x449000-0x449fff:S, 0x44a000-0x44afff:S, 0x44b000-0x44bfff:S, 0x44c000-0x44cfff:S, 0x44d000-0x44dfff:S, 0x44e000-0x44efff:S, 0x44f000-0x44ffff:S, 0x450000-0x450fff:S, 0x451000-0x451fff:S, 0x452000-0x452fff:S, 0x453000-0x453fff:S, 0x454000-0x454fff:S, 0x455000-0x455fff:S, 0x456000-0x456fff:S, 0x457000-0x457fff:S, 0x458000-0x458fff:S, 0x459000-0x459fff:S, 0x45a000-0x45afff:S, 0x45b000-0x45bfff:S, 0x45c000-0x45cfff:S, 0x45d000-0x45dfff:S, 0x45e000-0x45efff:S, 0x45f000-0x45ffff:S, 0x460000-0x460fff:S, 0x461000-0x461fff:S, 0x462000-0x462fff:S, 0x463000-0x463fff:S, 0x464000-0x464fff:S, 0x465000-0x465fff:S, 0x466000-0x466fff:S, 0x467000-0x467fff:S, 0x468000-0x468fff:S, 0x469000-0x469fff:S, 0x46a000-0x46afff:S, 0x46b000-0x46bfff:S, 0x46c000-0x46cfff:S, 0x46d000-0x46dfff:S, 0x46e000-0x46efff:S, 0x46f000-0x46ffff:S, 0x470000-0x470fff:S, 0x471000-0x471fff:S, 0x472000-0x472fff:S, 0x473000-0x473fff:S, 0x474000-0x474fff:S, 0x475000-0x475fff:S, 0x476000-0x476fff:S, 0x477000-0x477fff:S, 0x478000-0x478fff:S, 0x479000-0x479fff:S, 0x47a000-0x47afff:S, 0x47b000-0x47bfff:S, 0x47c000-0x47cfff:S, 0x47d000-0x47dfff:S, 0x47e000-0x47efff:S, 0x47f000-0x47ffff:S, 0x480000-0x480fff:S, 0x481000-0x481fff:S, 0x482000-0x482fff:S, 0x483000-0x483fff:S, 0x484000-0x484fff:S, 0x485000-0x485fff:S, 0x486000-0x486fff:S, 0x487000-0x487fff:S, 0x488000-0x488fff:S, 0x489000-0x489fff:S, 0x48a000-0x48afff:S, 0x48b000-0x48bfff:S, 0x48c000-0x48cfff:S, 0x48d000-0x48dfff:S, 0x48e000-0x48efff:S, 0x48f000-0x48ffff:S, 0x490000-0x490fff:S, 0x491000-0x491fff:S, 0x492000-0x492fff:S, 0x493000-0x493fff:S, 0x494000-0x494fff:S, 0x495000-0x495fff:S, 0x496000-0x496fff:S, 0x497000-0x497fff:S, 0x498000-0x498fff:S, 0x499000-0x499fff:S, 0x49a000-0x49afff:S, 0x49b000-0x49bfff:S, 0x49c000-0x49cfff:S, 0x49d000-0x49dfff:S, 0x49e000-0x49efff:S, 0x49f000-0x49ffff:S, 0x4a0000-0x4a0fff:S, 0x4a1000-0x4a1fff:S, 0x4a2000-0x4a2fff:S, 0x4a3000-0x4a3fff:S, 0x4a4000-0x4a4fff:S, 0x4a5000-0x4a5fff:S, 0x4a6000-0x4a6fff:S, 0x4a7000-0x4a7fff:S, 0x4a8000-0x4a8fff:S, 0x4a9000-0x4a9fff:S, 0x4aa000-0x4aafff:S, 0x4ab000-0x4abfff:S, 0x4ac000-0x4acfff:S, 0x4ad000-0x4adfff:S, 0x4ae000-0x4aefff:S, 0x4af000-0x4affff:S, 0x4b0000-0x4b0fff:S, 0x4b1000-0x4b1fff:S, 0x4b2000-0x4b2fff:S, 0x4b3000-0x4b3fff:S, 0x4b4000-0x4b4fff:S, 0x4b5000-0x4b5fff:S, 0x4b6000-0x4b6fff:S, 0x4b7000-0x4b7fff:S, 0x4b8000-0x4b8fff:S, 0x4b9000-0x4b9fff:S, 0x4ba000-0x4bafff:S, 0x4bb000-0x4bbfff:S, 0x4bc000-0x4bcfff:S, 0x4bd000-0x4bdfff:S, 0x4be000-0x4befff:S, 0x4bf000-0x4bffff:S, 0x4c0000-0x4c0fff:S, 0x4c1000-0x4c1fff:S, 0x4c2000-0x4c2fff:S, 0x4c3000-0x4c3fff:S, 0x4c4000-0x4c4fff:S, 0x4c5000-0x4c5fff:S, 0x4c6000-0x4c6fff:S, 0x4c7000-0x4c7fff:S, 0x4c8000-0x4c8fff:S, 0x4c9000-0x4c9fff:S, 0x4ca000-0x4cafff:S, 0x4cb000-0x4cbfff:S, 0x4cc000-0x4ccfff:S, 0x4cd000-0x4cdfff:S, 0x4ce000-0x4cefff:S, 0x4cf000-0x4cffff:S, 0x4d0000-0x4d0fff:S, 0x4d1000-0x4d1fff:S, 0x4d2000-0x4d2fff:S, 0x4d3000-0x4d3fff:S, 0x4d4000-0x4d4fff:S, 0x4d5000-0x4d5fff:S, 0x4d6000-0x4d6fff:S, 0x4d7000-0x4d7fff:S, 0x4d8000-0x4d8fff:S, 0x4d9000-0x4d9fff:S, 0x4da000-0x4dafff:S, 0x4db000-0x4dbfff:S, 0x4dc000-0x4dcfff:S, 0x4dd000-0x4ddfff:S, 0x4de000-0x4defff:S, 0x4df000-0x4dffff:S, 0x4e0000-0x4e0fff:S, 0x4e1000-0x4e1fff:S, 0x4e2000-0x4e2fff:S, 0x4e3000-0x4e3fff:S, 0x4e4000-0x4e4fff:S, 0x4e5000-0x4e5fff:S, 0x4e6000-0x4e6fff:S, 0x4e7000-0x4e7fff:S, 0x4e8000-0x4e8fff:S, 0x4e9000-0x4e9fff:S, 0x4ea000-0x4eafff:S, 0x4eb000-0x4ebfff:S, 0x4ec000-0x4ecfff:S, 0x4ed000-0x4edfff:S, 0x4ee000-0x4eefff:S, 0x4ef000-0x4effff:S, 0x4f0000-0x4f0fff:S, 0x4f1000-0x4f1fff:S, 0x4f2000-0x4f2fff:S, 0x4f3000-0x4f3fff:S, 0x4f4000-0x4f4fff:S, 0x4f5000-0x4f5fff:S, 0x4f6000-0x4f6fff:S, 0x4f7000-0x4f7fff:S, 0x4f8000-0x4f8fff:S, 0x4f9000-0x4f9fff:S, 0x4fa000-0x4fafff:S, 0x4fb000-0x4fbfff:S, 0x4fc000-0x4fcfff:S, 0x4fd000-0x4fdfff:S, 0x4fe000-0x4fefff:S, 0x4ff000-0x4fffff:S, 0x500000-0x500fff:S, 0x501000-0x501fff:S, 0x502000-0x502fff:S, 0x503000-0x503fff:S, 0x504000-0x504fff:S, 0x505000-0x505fff:S, 0x506000-0x506fff:S, 0x507000-0x507fff:S, 0x508000-0x508fff:S, 0x509000-0x509fff:S, 0x50a000-0x50afff:S, 0x50b000-0x50bfff:S, 0x50c000-0x50cfff:S, 0x50d000-0x50dfff:S, 0x50e000-0x50efff:S, 0x50f000-0x50ffff:S, 0x510000-0x510fff:S, 0x511000-0x511fff:S, 0x512000-0x512fff:S, 0x513000-0x513fff:S, 0x514000-0x514fff:S, 0x515000-0x515fff:S, 0x516000-0x516fff:S, 0x517000-0x517fff:S, 0x518000-0x518fff:S, 0x519000-0x519fff:S, 0x51a000-0x51afff:S, 0x51b000-0x51bfff:S, 0x51c000-0x51cfff:S, 0x51d000-0x51dfff:S, 0x51e000-0x51efff:S, 0x51f000-0x51ffff:S, 0x520000-0x520fff:S, 0x521000-0x521fff:S, 0x522000-0x522fff:S, 0x523000-0x523fff:S, 0x524000-0x524fff:S, 0x525000-0x525fff:S, 0x526000-0x526fff:S, 0x527000-0x527fff:S, 0x528000-0x528fff:S, 0x529000-0x529fff:S, 0x52a000-0x52afff:S, 0x52b000-0x52bfff:S, 0x52c000-0x52cfff:S, 0x52d000-0x52dfff:S, 0x52e000-0x52efff:S, 0x52f000-0x52ffff:S, 0x530000-0x530fff:S, 0x531000-0x531fff:S, 0x532000-0x532fff:S, 0x533000-0x533fff:S, 0x534000-0x534fff:S, 0x535000-0x535fff:S, 0x536000-0x536fff:S, 0x537000-0x537fff:S, 0x538000-0x538fff:S, 0x539000-0x539fff:S, 0x53a000-0x53afff:S, 0x53b000-0x53bfff:S, 0x53c000-0x53cfff:S, 0x53d000-0x53dfff:S, 0x53e000-0x53efff:S, 0x53f000-0x53ffff:S, 0x540000-0x540fff:S, 0x541000-0x541fff:S, 0x542000-0x542fff:S, 0x543000-0x543fff:S, 0x544000-0x544fff:S, 0x545000-0x545fff:S, 0x546000-0x546fff:S, 0x547000-0x547fff:S, 0x548000-0x548fff:S, 0x549000-0x549fff:S, 0x54a000-0x54afff:S, 0x54b000-0x54bfff:S, 0x54c000-0x54cfff:S, 0x54d000-0x54dfff:S, 0x54e000-0x54efff:S, 0x54f000-0x54ffff:S, 0x550000-0x550fff:S, 0x551000-0x551fff:S, 0x552000-0x552fff:S, 0x553000-0x553fff:S, 0x554000-0x554fff:S, 0x555000-0x555fff:S, 0x556000-0x556fff:S, 0x557000-0x557fff:S, 0x558000-0x558fff:S, 0x559000-0x559fff:S, 0x55a000-0x55afff:S, 0x55b000-0x55bfff:S, 0x55c000-0x55cfff:S, 0x55d000-0x55dfff:S, 0x55e000-0x55efff:S, 0x55f000-0x55ffff:S, 0x560000-0x560fff:S, 0x561000-0x561fff:S, 0x562000-0x562fff:S, 0x563000-0x563fff:S, 0x564000-0x564fff:S, 0x565000-0x565fff:S, 0x566000-0x566fff:S, 0x567000-0x567fff:S, 0x568000-0x568fff:S, 0x569000-0x569fff:S, 0x56a000-0x56afff:S, 0x56b000-0x56bfff:S, 0x56c000-0x56cfff:S, 0x56d000-0x56dfff:S, 0x56e000-0x56efff:S, 0x56f000-0x56ffff:S, 0x570000-0x570fff:S, 0x571000-0x571fff:S, 0x572000-0x572fff:S, 0x573000-0x573fff:S, 0x574000-0x574fff:S, 0x575000-0x575fff:S, 0x576000-0x576fff:S, 0x577000-0x577fff:S, 0x578000-0x578fff:S, 0x579000-0x579fff:S, 0x57a000-0x57afff:S, 0x57b000-0x57bfff:S, 0x57c000-0x57cfff:S, 0x57d000-0x57dfff:S, 0x57e000-0x57efff:S, 0x57f000-0x57ffff:S, 0x580000-0x580fff:S, 0x581000-0x581fff:S, 0x582000-0x582fff:S, 0x583000-0x583fff:S, 0x584000-0x584fff:S, 0x585000-0x585fff:S, 0x586000-0x586fff:S, 0x587000-0x587fff:S, 0x588000-0x588fff:S, 0x589000-0x589fff:S, 0x58a000-0x58afff:S, 0x58b000-0x58bfff:S, 0x58c000-0x58cfff:S, 0x58d000-0x58dfff:S, 0x58e000-0x58efff:S, 0x58f000-0x58ffff:S, 0x590000-0x590fff:S, 0x591000-0x591fff:S, 0x592000-0x592fff:S, 0x593000-0x593fff:S, 0x594000-0x594fff:S, 0x595000-0x595fff:S, 0x596000-0x596fff:S, 0x597000-0x597fff:S, 0x598000-0x598fff:S, 0x599000-0x599fff:S, 0x59a000-0x59afff:S, 0x59b000-0x59bfff:S, 0x59c000-0x59cfff:S, 0x59d000-0x59dfff:S, 0x59e000-0x59efff:S, 0x59f000-0x59ffff:S, 0x5a0000-0x5a0fff:S, 0x5a1000-0x5a1fff:S, 0x5a2000-0x5a2fff:S, 0x5a3000-0x5a3fff:S, 0x5a4000-0x5a4fff:S, 0x5a5000-0x5a5fff:S, 0x5a6000-0x5a6fff:S, 0x5a7000-0x5a7fff:S, 0x5a8000-0x5a8fff:S, 0x5a9000-0x5a9fff:S, 0x5aa000-0x5aafff:S, 0x5ab000-0x5abfff:S, 0x5ac000-0x5acfff:S, 0x5ad000-0x5adfff:S, 0x5ae000-0x5aefff:S, 0x5af000-0x5affff:S, 0x5b0000-0x5b0fff:S, 0x5b1000-0x5b1fff:S, 0x5b2000-0x5b2fff:S, 0x5b3000-0x5b3fff:S, 0x5b4000-0x5b4fff:S, 0x5b5000-0x5b5fff:S, 0x5b6000-0x5b6fff:S, 0x5b7000-0x5b7fff:S, 0x5b8000-0x5b8fff:S, 0x5b9000-0x5b9fff:S, 0x5ba000-0x5bafff:S, 0x5bb000-0x5bbfff:S, 0x5bc000-0x5bcfff:S, 0x5bd000-0x5bdfff:S, 0x5be000-0x5befff:S, 0x5bf000-0x5bffff:S, 0x5c0000-0x5c0fff:S, 0x5c1000-0x5c1fff:S, 0x5c2000-0x5c2fff:S, 0x5c3000-0x5c3fff:S, 0x5c4000-0x5c4fff:S, 0x5c5000-0x5c5fff:S, 0x5c6000-0x5c6fff:S, 0x5c7000-0x5c7fff:S, 0x5c8000-0x5c8fff:S, 0x5c9000-0x5c9fff:S, 0x5ca000-0x5cafff:S, 0x5cb000-0x5cbfff:S, 0x5cc000-0x5ccfff:S, 0x5cd000-0x5cdfff:S, 0x5ce000-0x5cefff:S, 0x5cf000-0x5cffff:S, 0x5d0000-0x5d0fff:S, 0x5d1000-0x5d1fff:S, 0x5d2000-0x5d2fff:S, 0x5d3000-0x5d3fff:S, 0x5d4000-0x5d4fff:S, 0x5d5000-0x5d5fff:S, 0x5d6000-0x5d6fff:S, 0x5d7000-0x5d7fff:S, 0x5d8000-0x5d8fff:S, 0x5d9000-0x5d9fff:S, 0x5da000-0x5dafff:S, 0x5db000-0x5dbfff:S, 0x5dc000-0x5dcfff:S, 0x5dd000-0x5ddfff:S, 0x5de000-0x5defff:S, 0x5df000-0x5dffff:S, 0x5e0000-0x5e0fff:S, 0x5e1000-0x5e1fff:S, 0x5e2000-0x5e2fff:S, 0x5e3000-0x5e3fff:S, 0x5e4000-0x5e4fff:S, 0x5e5000-0x5e5fff:S, 0x5e6000-0x5e6fff:S, 0x5e7000-0x5e7fff:S, 0x5e8000-0x5e8fff:S, 0x5e9000-0x5e9fff:S, 0x5ea000-0x5eafff:S, 0x5eb000-0x5ebfff:S, 0x5ec000-0x5ecfff:S, 0x5ed000-0x5edfff:S, 0x5ee000-0x5eefff:S, 0x5ef000-0x5effff:S, 0x5f0000-0x5f0fff:S, 0x5f1000-0x5f1fff:S, 0x5f2000-0x5f2fff:S, 0x5f3000-0x5f3fff:S, 0x5f4000-0x5f4fff:S, 0x5f5000-0x5f5fff:S, 0x5f6000-0x5f6fff:S, 0x5f7000-0x5f7fff:S, 0x5f8000-0x5f8fff:S, 0x5f9000-0x5f9fff:S, 0x5fa000-0x5fafff:S, 0x5fb000-0x5fbfff:S, 0x5fc000-0x5fcfff:S, 0x5fd000-0x5fdfff:S, 0x5fe000-0x5fefff:S, 0x5ff000-0x5fffff:S, 0x600000-0x600fff:S, 0x601000-0x601fff:S, 0x602000-0x602fff:S, 0x603000-0x603fff:S, 0x604000-0x604fff:S, 0x605000-0x605fff:S, 0x606000-0x606fff:S, 0x607000-0x607fff:S, 0x608000-0x608fff:S, 0x609000-0x609fff:S, 0x60a000-0x60afff:S, 0x60b000-0x60bfff:S, 0x60c000-0x60cfff:S, 0x60d000-0x60dfff:S, 0x60e000-0x60efff:S, 0x60f000-0x60ffff:S, 0x610000-0x610fff:S, 0x611000-0x611fff:S, 0x612000-0x612fff:S, 0x613000-0x613fff:S, 0x614000-0x614fff:S, 0x615000-0x615fff:S, 0x616000-0x616fff:S, 0x617000-0x617fff:S, 0x618000-0x618fff:S, 0x619000-0x619fff:S, 0x61a000-0x61afff:S, 0x61b000-0x61bfff:S, 0x61c000-0x61cfff:S, 0x61d000-0x61dfff:S, 0x61e000-0x61efff:S, 0x61f000-0x61ffff:S, 0x620000-0x620fff:S, 0x621000-0x621fff:S, 0x622000-0x622fff:S, 0x623000-0x623fff:S, 0x624000-0x624fff:S, 0x625000-0x625fff:S, 0x626000-0x626fff:S, 0x627000-0x627fff:S, 0x628000-0x628fff:S, 0x629000-0x629fff:S, 0x62a000-0x62afff:S, 0x62b000-0x62bfff:S, 0x62c000-0x62cfff:S, 0x62d000-0x62dfff:S, 0x62e000-0x62efff:S, 0x62f000-0x62ffff:S, 0x630000-0x630fff:S, 0x631000-0x631fff:S, 0x632000-0x632fff:S, 0x633000-0x633fff:S, 0x634000-0x634fff:S, 0x635000-0x635fff:S, 0x636000-0x636fff:S, 0x637000-0x637fff:S, 0x638000-0x638fff:S, 0x639000-0x639fff:S, 0x63a000-0x63afff:S, 0x63b000-0x63bfff:S, 0x63c000-0x63cfff:S, 0x63d000-0x63dfff:S, 0x63e000-0x63efff:S, 0x63f000-0x63ffff:S, 0x640000-0x640fff:S, 0x641000-0x641fff:S, 0x642000-0x642fff:S, 0x643000-0x643fff:S, 0x644000-0x644fff:S, 0x645000-0x645fff:S, 0x646000-0x646fff:S, 0x647000-0x647fff:S, 0x648000-0x648fff:S, 0x649000-0x649fff:S, 0x64a000-0x64afff:S, 0x64b000-0x64bfff:S, 0x64c000-0x64cfff:S, 0x64d000-0x64dfff:S, 0x64e000-0x64efff:S, 0x64f000-0x64ffff:S, 0x650000-0x650fff:S, 0x651000-0x651fff:S, 0x652000-0x652fff:S, 0x653000-0x653fff:S, 0x654000-0x654fff:S, 0x655000-0x655fff:S, 0x656000-0x656fff:S, 0x657000-0x657fff:S, 0x658000-0x658fff:S, 0x659000-0x659fff:S, 0x65a000-0x65afff:S, 0x65b000-0x65bfff:S, 0x65c000-0x65cfff:S, 0x65d000-0x65dfff:S, 0x65e000-0x65efff:S, 0x65f000-0x65ffff:S, 0x660000-0x660fff:S, 0x661000-0x661fff:S, 0x662000-0x662fff:S, 0x663000-0x663fff:S, 0x664000-0x664fff:S, 0x665000-0x665fff:S, 0x666000-0x666fff:S, 0x667000-0x667fff:S, 0x668000-0x668fff:S, 0x669000-0x669fff:S, 0x66a000-0x66afff:S, 0x66b000-0x66bfff:S, 0x66c000-0x66cfff:S, 0x66d000-0x66dfff:S, 0x66e000-0x66efff:S, 0x66f000-0x66ffff:S, 0x670000-0x670fff:S, 0x671000-0x671fff:S, 0x672000-0x672fff:S, 0x673000-0x673fff:S, 0x674000-0x674fff:S, 0x675000-0x675fff:S, 0x676000-0x676fff:S, 0x677000-0x677fff:S, 0x678000-0x678fff:S, 0x679000-0x679fff:S, 0x67a000-0x67afff:S, 0x67b000-0x67bfff:S, 0x67c000-0x67cfff:S, 0x67d000-0x67dfff:S, 0x67e000-0x67efff:S, 0x67f000-0x67ffff:S, 0x680000-0x680fff:S, 0x681000-0x681fff:S, 0x682000-0x682fff:S, 0x683000-0x683fff:S, 0x684000-0x684fff:S, 0x685000-0x685fff:S, 0x686000-0x686fff:S, 0x687000-0x687fff:S, 0x688000-0x688fff:S, 0x689000-0x689fff:S, 0x68a000-0x68afff:S, 0x68b000-0x68bfff:S, 0x68c000-0x68cfff:S, 0x68d000-0x68dfff:S, 0x68e000-0x68efff:S, 0x68f000-0x68ffff:S, 0x690000-0x690fff:S, 0x691000-0x691fff:S, 0x692000-0x692fff:S, 0x693000-0x693fff:S, 0x694000-0x694fff:S, 0x695000-0x695fff:S, 0x696000-0x696fff:S, 0x697000-0x697fff:S, 0x698000-0x698fff:S, 0x699000-0x699fff:S, 0x69a000-0x69afff:S, 0x69b000-0x69bfff:S, 0x69c000-0x69cfff:S, 0x69d000-0x69dfff:S, 0x69e000-0x69efff:S, 0x69f000-0x69ffff:S, 0x6a0000-0x6a0fff:S, 0x6a1000-0x6a1fff:S, 0x6a2000-0x6a2fff:S, 0x6a3000-0x6a3fff:S, 0x6a4000-0x6a4fff:S, 0x6a5000-0x6a5fff:S, 0x6a6000-0x6a6fff:S, 0x6a7000-0x6a7fff:S, 0x6a8000-0x6a8fff:S, 0x6a9000-0x6a9fff:S, 0x6aa000-0x6aafff:S, 0x6ab000-0x6abfff:S, 0x6ac000-0x6acfff:S, 0x6ad000-0x6adfff:S, 0x6ae000-0x6aefff:S, 0x6af000-0x6affff:S, 0x6b0000-0x6b0fff:S, 0x6b1000-0x6b1fff:S, 0x6b2000-0x6b2fff:S, 0x6b3000-0x6b3fff:S, 0x6b4000-0x6b4fff:S, 0x6b5000-0x6b5fff:S, 0x6b6000-0x6b6fff:S, 0x6b7000-0x6b7fff:S, 0x6b8000-0x6b8fff:S, 0x6b9000-0x6b9fff:S, 0x6ba000-0x6bafff:S, 0x6bb000-0x6bbfff:S, 0x6bc000-0x6bcfff:S, 0x6bd000-0x6bdfff:S, 0x6be000-0x6befff:S, 0x6bf000-0x6bffff:S, 0x6c0000-0x6c0fff:S, 0x6c1000-0x6c1fff:S, 0x6c2000-0x6c2fff:S, 0x6c3000-0x6c3fff:S, 0x6c4000-0x6c4fff:S, 0x6c5000-0x6c5fff:S, 0x6c6000-0x6c6fff:S, 0x6c7000-0x6c7fff:S, 0x6c8000-0x6c8fff:S, 0x6c9000-0x6c9fff:S, 0x6ca000-0x6cafff:S, 0x6cb000-0x6cbfff:S, 0x6cc000-0x6ccfff:S, 0x6cd000-0x6cdfff:S, 0x6ce000-0x6cefff:S, 0x6cf000-0x6cffff:S, 0x6d0000-0x6d0fff:S, 0x6d1000-0x6d1fff:S, 0x6d2000-0x6d2fff:S, 0x6d3000-0x6d3fff:S, 0x6d4000-0x6d4fff:S, 0x6d5000-0x6d5fff:S, 0x6d6000-0x6d6fff:S, 0x6d7000-0x6d7fff:S, 0x6d8000-0x6d8fff:S, 0x6d9000-0x6d9fff:S, 0x6da000-0x6dafff:S, 0x6db000-0x6dbfff:S, 0x6dc000-0x6dcfff:S, 0x6dd000-0x6ddfff:S, 0x6de000-0x6defff:S, 0x6df000-0x6dffff:S, 0x6e0000-0x6e0fff:S, 0x6e1000-0x6e1fff:S, 0x6e2000-0x6e2fff:S, 0x6e3000-0x6e3fff:S, 0x6e4000-0x6e4fff:S, 0x6e5000-0x6e5fff:S, 0x6e6000-0x6e6fff:S, 0x6e7000-0x6e7fff:S, 0x6e8000-0x6e8fff:S, 0x6e9000-0x6e9fff:S, 0x6ea000-0x6eafff:S, 0x6eb000-0x6ebfff:S, 0x6ec000-0x6ecfff:S, 0x6ed000-0x6edfff:S, 0x6ee000-0x6eefff:S, 0x6ef000-0x6effff:S, 0x6f0000-0x6f0fff:S, 0x6f1000-0x6f1fff:S, 0x6f2000-0x6f2fff:S, 0x6f3000-0x6f3fff:S, 0x6f4000-0x6f4fff:S, 0x6f5000-0x6f5fff:S, 0x6f6000-0x6f6fff:S, 0x6f7000-0x6f7fff:S, 0x6f8000-0x6f8fff:S, 0x6f9000-0x6f9fff:S, 0x6fa000-0x6fafff:S, 0x6fb000-0x6fbfff:S, 0x6fc000-0x6fcfff:S, 0x6fd000-0x6fdfff:S, 0x6fe000-0x6fefff:S, 0x6ff000-0x6fffff:S, 0x700000-0x700fff:S, 0x701000-0x701fff:S, 0x702000-0x702fff:S, 0x703000-0x703fff:S, 0x704000-0x704fff:S, 0x705000-0x705fff:S, 0x706000-0x706fff:S, 0x707000-0x707fff:S, 0x708000-0x708fff:S, 0x709000-0x709fff:S, 0x70a000-0x70afff:S, 0x70b000-0x70bfff:S, 0x70c000-0x70cfff:S, 0x70d000-0x70dfff:S, 0x70e000-0x70efff:S, 0x70f000-0x70ffff:S, 0x710000-0x710fff:S, 0x711000-0x711fff:S, 0x712000-0x712fff:S, 0x713000-0x713fff:S, 0x714000-0x714fff:S, 0x715000-0x715fff:S, 0x716000-0x716fff:S, 0x717000-0x717fff:S, 0x718000-0x718fff:S, 0x719000-0x719fff:S, 0x71a000-0x71afff:S, 0x71b000-0x71bfff:S, 0x71c000-0x71cfff:S, 0x71d000-0x71dfff:S, 0x71e000-0x71efff:S, 0x71f000-0x71ffff:S, 0x720000-0x720fff:S, 0x721000-0x721fff:S, 0x722000-0x722fff:S, 0x723000-0x723fff:S, 0x724000-0x724fff:S, 0x725000-0x725fff:S, 0x726000-0x726fff:S, 0x727000-0x727fff:S, 0x728000-0x728fff:S, 0x729000-0x729fff:S, 0x72a000-0x72afff:S, 0x72b000-0x72bfff:S, 0x72c000-0x72cfff:S, 0x72d000-0x72dfff:S, 0x72e000-0x72efff:S, 0x72f000-0x72ffff:S, 0x730000-0x730fff:S, 0x731000-0x731fff:S, 0x732000-0x732fff:S, 0x733000-0x733fff:S, 0x734000-0x734fff:S, 0x735000-0x735fff:S, 0x736000-0x736fff:S, 0x737000-0x737fff:S, 0x738000-0x738fff:S, 0x739000-0x739fff:S, 0x73a000-0x73afff:S, 0x73b000-0x73bfff:S, 0x73c000-0x73cfff:S, 0x73d000-0x73dfff:S, 0x73e000-0x73efff:S, 0x73f000-0x73ffff:S, 0x740000-0x740fff:S, 0x741000-0x741fff:S, 0x742000-0x742fff:S, 0x743000-0x743fff:S, 0x744000-0x744fff:S, 0x745000-0x745fff:S, 0x746000-0x746fff:S, 0x747000-0x747fff:S, 0x748000-0x748fff:S, 0x749000-0x749fff:S, 0x74a000-0x74afff:S, 0x74b000-0x74bfff:S, 0x74c000-0x74cfff:S, 0x74d000-0x74dfff:S, 0x74e000-0x74efff:S, 0x74f000-0x74ffff:S, 0x750000-0x750fff:S, 0x751000-0x751fff:S, 0x752000-0x752fff:S, 0x753000-0x753fff:S, 0x754000-0x754fff:S, 0x755000-0x755fff:S, 0x756000-0x756fff:S, 0x757000-0x757fff:S, 0x758000-0x758fff:S, 0x759000-0x759fff:S, 0x75a000-0x75afff:S, 0x75b000-0x75bfff:S, 0x75c000-0x75cfff:S, 0x75d000-0x75dfff:S, 0x75e000-0x75efff:S, 0x75f000-0x75ffff:S, 0x760000-0x760fff:S, 0x761000-0x761fff:S, 0x762000-0x762fff:S, 0x763000-0x763fff:S, 0x764000-0x764fff:S, 0x765000-0x765fff:S, 0x766000-0x766fff:S, 0x767000-0x767fff:S, 0x768000-0x768fff:S, 0x769000-0x769fff:S, 0x76a000-0x76afff:S, 0x76b000-0x76bfff:S, 0x76c000-0x76cfff:S, 0x76d000-0x76dfff:S, 0x76e000-0x76efff:S, 0x76f000-0x76ffff:S, 0x770000-0x770fff:S, 0x771000-0x771fff:S, 0x772000-0x772fff:S, 0x773000-0x773fff:S, 0x774000-0x774fff:S, 0x775000-0x775fff:S, 0x776000-0x776fff:S, 0x777000-0x777fff:S, 0x778000-0x778fff:S, 0x779000-0x779fff:S, 0x77a000-0x77afff:S, 0x77b000-0x77bfff:S, 0x77c000-0x77cfff:S, 0x77d000-0x77dfff:S, 0x77e000-0x77efff:S, 0x77f000-0x77ffff:S, 0x780000-0x780fff:S, 0x781000-0x781fff:S, 0x782000-0x782fff:S, 0x783000-0x783fff:S, 0x784000-0x784fff:S, 0x785000-0x785fff:S, 0x786000-0x786fff:S, 0x787000-0x787fff:S, 0x788000-0x788fff:S, 0x789000-0x789fff:S, 0x78a000-0x78afff:S, 0x78b000-0x78bfff:S, 0x78c000-0x78cfff:S, 0x78d000-0x78dfff:S, 0x78e000-0x78efff:S, 0x78f000-0x78ffff:S, 0x790000-0x790fff:S, 0x791000-0x791fff:S, 0x792000-0x792fff:S, 0x793000-0x793fff:S, 0x794000-0x794fff:S, 0x795000-0x795fff:S, 0x796000-0x796fff:S, 0x797000-0x797fff:S, 0x798000-0x798fff:S, 0x799000-0x799fff:S, 0x79a000-0x79afff:S, 0x79b000-0x79bfff:S, 0x79c000-0x79cfff:S, 0x79d000-0x79dfff:S, 0x79e000-0x79efff:S, 0x79f000-0x79ffff:S, 0x7a0000-0x7a0fff:S, 0x7a1000-0x7a1fff:S, 0x7a2000-0x7a2fff:S, 0x7a3000-0x7a3fff:S, 0x7a4000-0x7a4fff:S, 0x7a5000-0x7a5fff:S, 0x7a6000-0x7a6fff:S, 0x7a7000-0x7a7fff:S, 0x7a8000-0x7a8fff:S, 0x7a9000-0x7a9fff:S, 0x7aa000-0x7aafff:S, 0x7ab000-0x7abfff:S, 0x7ac000-0x7acfff:S, 0x7ad000-0x7adfff:S, 0x7ae000-0x7aefff:S, 0x7af000-0x7affff:S, 0x7b0000-0x7b0fff:S, 0x7b1000-0x7b1fff:S, 0x7b2000-0x7b2fff:S, 0x7b3000-0x7b3fff:S, 0x7b4000-0x7b4fff:S, 0x7b5000-0x7b5fff:S, 0x7b6000-0x7b6fff:S, 0x7b7000-0x7b7fff:S, 0x7b8000-0x7b8fff:S, 0x7b9000-0x7b9fff:S, 0x7ba000-0x7bafff:S, 0x7bb000-0x7bbfff:S, 0x7bc000-0x7bcfff:S, 0x7bd000-0x7bdfff:S, 0x7be000-0x7befff:S, 0x7bf000-0x7bffff:S, 0x7c0000-0x7c0fff:S, 0x7c1000-0x7c1fff:S, 0x7c2000-0x7c2fff:S, 0x7c3000-0x7c3fff:S, 0x7c4000-0x7c4fff:S, 0x7c5000-0x7c5fff:S, 0x7c6000-0x7c6fff:S, 0x7c7000-0x7c7fff:S, 0x7c8000-0x7c8fff:S, 0x7c9000-0x7c9fff:S, 0x7ca000-0x7cafff:S, 0x7cb000-0x7cbfff:S, 0x7cc000-0x7ccfff:S, 0x7cd000-0x7cdfff:S, 0x7ce000-0x7cefff:S, 0x7cf000-0x7cffff:S, 0x7d0000-0x7d0fff:S, 0x7d1000-0x7d1fff:S, 0x7d2000-0x7d2fff:S, 0x7d3000-0x7d3fff:S, 0x7d4000-0x7d4fff:S, 0x7d5000-0x7d5fff:S, 0x7d6000-0x7d6fff:S, 0x7d7000-0x7d7fff:S, 0x7d8000-0x7d8fff:S, 0x7d9000-0x7d9fff:S, 0x7da000-0x7dafff:S, 0x7db000-0x7dbfff:S, 0x7dc000-0x7dcfff:S, 0x7dd000-0x7ddfff:S, 0x7de000-0x7defff:S, 0x7df000-0x7dffff:S, 0x7e0000-0x7e0fff:S, 0x7e1000-0x7e1fff:S, 0x7e2000-0x7e2fff:S, 0x7e3000-0x7e3fff:S, 0x7e4000-0x7e4fff:S, 0x7e5000-0x7e5fff:S, 0x7e6000-0x7e6fff:S, 0x7e7000-0x7e7fff:S, 0x7e8000-0x7e8fff:S, 0x7e9000-0x7e9fff:S, 0x7ea000-0x7eafff:S, 0x7eb000-0x7ebfff:S, 0x7ec000-0x7ecfff:S, 0x7ed000-0x7edfff:S, 0x7ee000-0x7eefff:S, 0x7ef000-0x7effff:S, 0x7f0000-0x7f0fff:S, 0x7f1000-0x7f1fff:S, 0x7f2000-0x7f2fff:S, 0x7f3000-0x7f3fff:S, 0x7f4000-0x7f4fff:S, 0x7f5000-0x7f5fff:S, 0x7f6000-0x7f6fff:S, 0x7f7000-0x7f7fff:S, 0x7f8000-0x7f8fff:S, 0x7f9000-0x7f9fff:S, 0x7fa000-0x7fafff:S, 0x7fb000-0x7fbfff:S, 0x7fc000-0x7fcfff:S, 0x7fd000-0x7fdfff:S, 0x7fe000-0x7fefff:S, 0x7ff000-0x7fffff:S Erase/write done. Verifying flash... Reading 8388608 bytes starting at 0x000000. VERIFIED. Restoring MMIO space at 0x1095a68a0 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

Report: MSI H77MA-G43 (MS-7756) V1.11 read
by dpcimanager＠users.sourceforge.net 05 Apr '13

05 Apr '13

flashrom v0.9.6.1-r1653 on Darwin 12.3.0 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.10, LLVM Clang 4.2 (clang-425.0.24), little endian Command line (5 args): ~/Downloads/DPCIManager/DPCIManager.app/Contents/MacOS/flashrom -VV -r /var/folders/5g/z9x4lc990c34292gzfltr3w40000gn/T/DPCIQYUSsh.rom -p internal Calibrating delay loop... OS timer resolution is 1 usecs, 411M loops per second, 10 myus = 10 us, 100 myus = 95 us, 1000 myus = 961 us, 10000 myus = 9103 us, 4 myus = 5 us, OK. Initializing internal programmer Mapping low megabyte at 0x00000400, unaligned size 0xffc00. Mapping low megabyte, 0xffc00 bytes at unaligned 0x00000400. No coreboot table found. DMI string system-manufacturer: "MSI" DMI string system-product-name: "MS-7756" DMI string system-version: "1.0" DMI string baseboard-manufacturer: "MSI" DMI string baseboard-product-name: "H77MA-G43 (MS-7756)" DMI string baseboard-version: "1.0" DMI string chassis-type: "Desktop" Found chipset "Intel H77" with PCI ID 8086:1e4a. This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode enabled 0xff600000/0xff200000 FWH decode enabled 0xff500000/0xff100000 FWH decode enabled 0xff400000/0xff000000 FWH decode enabled Maximum FWH chip size: 0x100000 bytes BIOS_CNTL = 0x09: BIOS Lock Enable: disabled, BIOS Write Enable: enabled Root Complex Register Block address = 0xfed1c000 GCS = 0xc61: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0xe008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 Warning: SPI Configuration Lockdown activated. Reading OPCODES... done OP Type Pre-OP op[0]: 0x02, write w/ addr, none op[1]: 0x3b, read w/ addr, none op[2]: 0x20, write w/ addr, none op[3]: 0x05, read w/o addr, none op[4]: 0x9f, read w/o addr, none op[5]: 0x01, write w/o addr, none op[6]: 0x00, read w/o addr, none op[7]: 0x00, read w/o addr, none Pre-OP 0: 0x06, Pre-OP 1: 0x00 0x06: 0x3f00 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=63, SME=0 0x08: 0x007fffc0 (FADDR) 0x50: 0x0000ffff (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff 0x54: 0x00000000 FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-write. 0x58: 0x07ff0200 FREG1: BIOS region (0x00200000-0x007fffff) is read-write. 0x5C: 0x01ff0001 FREG2: Management Engine region (0x00001000-0x001fffff) is read-write. 0x60: 0x00001fff FREG3: Gigabit Ethernet region is unused. 0x64: 0x00001fff FREG4: Platform Data region is unused. 0x74: 0x00000000 (PR0 is unused) 0x78: 0x00000000 (PR1 is unused) 0x7C: 0x00000000 (PR2 is unused) 0x80: 0x00000000 (PR3 is unused) 0x84: 0x00000000 (PR4 is unused) 0x90: 0xc0 (SSFS) SSFS: SCIP=0, FDONE=0, FCERR=0, AEL=0 0x91: 0xfc4010 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=0, SME=0, SCF=4 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05203b02 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00802005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) Reading flash descriptors mapped by the chipset via FDOC/FDOD... done. === Content Section === FLVALSIG 0x0ff0a55a FLMAP0 0x02040003 FLMAP1 0x12100206 FLMAP2 0x00210120 --- Details --- NR (Number of Regions): 3 FRBA (Flash Region Base Address): 0x040 NC (Number of Components): 1 FCBA (Flash Component Base Address): 0x030 ISL (ICH/PCH Strap Length): 18 FISBA/FPSBA (Flash ICH/PCH Strap Base Address): 0x100 NM (Number of Masters): 3 FMBA (Flash Master Base Address): 0x060 MSL/PSL (MCH/PROC Strap Length): 1 FMSBA (Flash MCH/PROC Strap Base Address): 0x200 === Component Section === FLCOMP 0x64900024 FLILL 0x00000000 --- Details --- Component 1 density: 8 MB Component 2 is not used. Read Clock Frequency: 20 MHz Read ID and Status Clock Freq.: 50 MHz Write and Erase Clock Freq.: 50 MHz Fast Read is supported. Fast Read Clock Frequency: 50 MHz No forbidden opcodes. === Region Section === FLREG0 0x00000000 FLREG1 0x07ff0200 FLREG2 0x01ff0001 FLREG3 0x00001fff --- Details --- Region 0 (Descr.) 0x00000000 - 0x00000fff Region 1 (BIOS ) 0x00200000 - 0x007fffff Region 2 (ME ) 0x00001000 - 0x001fffff Region 3 (GbE ) is unused. === Master Section === FLMSTR1 0xffff0000 FLMSTR2 0xffff0000 FLMSTR3 0xffff0118 --- Details --- Descr. BIOS ME GbE Platf. BIOS rw rw rw rw rw ME rw rw rw rw rw GbE rw rw rw rw rw Enabling hardware sequencing because some important opcode is locked. SPI Read Configuration: prefetching enabled, caching enabled, OK. The following protocols are supported: FWH, Programmer-specific. Probing for Programmer Opaque flash chip, 0 kB: Found 1 attached SPI flash chip with a density of 8192 kB. There is only one partition containing the whole address space (0x000000 - 0x7fffff). There are 2048 erase blocks with 4096 B each. Found Programmer flash chip "Opaque flash chip" (8192 kB, Programmer-specific) at physical address 0x0. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x4c, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x00, id2 0x08, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x4c, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x00, id2 0x08, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x4c, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xef, id2 0x21, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x00, id2 0x08, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x00, id2 0x08, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x25, id2 0xa2, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x00, id2 0x08, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x00, id2 0x08, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x4c, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x25, id2 0xa2, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x00, id2 0x08, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x00, id2 0x08, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x00, id2 0x08, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x00, id2 0x08, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x4c, id2 0x8b, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0x00, id2 0x08, id1 parity violation, id1 is normal flash content, id2 is normal flash content Found Programmer flash chip "Opaque flash chip" (8192 kB, Programmer-specific). Reading flash... Reading 8388608 bytes starting at 0x000000. done. Restoring MMIO space at 0x1022ef8a0 Restoring PCI config space for 00:1f:0 reg 0xdc

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom