- flashrom - mail.coreboot.org

flashrom
by Michel BOUNY 02 May '14

02 May '14

bonjour ci-joint, fichier, issue de la commande flashrom -V >N68GSFX.txt. mon chipset n'est apparement pas reconnu. pour info merci

2 1

Re: [flashrom] Serprog/Arduino flasher
by Stefan Tauner 02 May '14

02 May '14

On Sat, 14 Dec 2013 02:46:57 -0600 Eric Marks <bigmarkslp(a)gmail.com> wrote: > I successfully used a Arduino Uno as a serprog programmer to program a > SST25VF016B with > Flashrom 0.9.5.2-r1517 on Ubuntu. > > I had tried hooking the eeprom up to the Arduino via level shifting > via resistors, and then via level shifting mosfets + resistors, and finally > via a level conversion chip, but none of them worked reliably. I finally > converted my Ardruino Uno to 3.3v by replacing the regulator. > > http://learn.adafruit.com/arduino-tips-tricks-and-techniques/3-3v-conversion > > This was a much easier solution, and it worked reliably. Once converted to > 3.3v, no extra components are needed. Just wire the eeprom directly to > pins 10,11,12,13, GND, and 5V (which is now actually 3.3v). Remember, > three pins of the eeprom go to 3.3v. > > I still had to slow the UART speed down to 115200 for the Arduino sketch on > the Uno, and while reading took a normal amount of time, it took several > hours to program the chip. I used -VVV to enable very very verbose output > to monitor the progress. > > Could someone update the wiki with this information? It didn't look like > there was any place to sign up and edit it myself. > > http://www.flashrom.org/Serprog/Arduino_flasher > > Thanks for helping me save a server! Thanks for your report and sorry for the late reply. I have created a wiki account for you in case you still want to contribute. The Arduino page requires quite some clean up IIRC. The original author really likes to be verbose... ;) The level shifting is indeed a delicate issue sometimes. Some chips react way worse to imperfect signals than others. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] Report: Intel QM67 - Tested OK
by Stefan Tauner 02 May '14

02 May '14

On Wed, 11 Dec 2013 07:55:06 +0100 omr Obermair Thomas <omr(a)keba.com> wrote: > flashrom v0.9.7-r1711 on Linux 3.2.51-keba0-rt72 (i686) > flashrom is free software, get the source code at http://www.flashrom.org > > flashrom was built with libpci 3.1.7, GCC 4.4.5, little endian > Command line (11 args): ./flashrom_eg -p internal -c MX25L6406E/MX25L6436E -l bios.layout -i bios -w EXHR0202_8MB.rom -V > romlayout 00000000 - 005fffff named me > romlayout 00600000 - 007fffff named bios > Using region: "bios". > Calibrating delay loop... OS timer resolution is 1 usecs, 2092M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1002 us, 10000 myus = 10001 us, 4 myus = 5 us, OK. > Initializing internal programmer > No coreboot table found. > DMI string system-manufacturer: "ADLINK Technology Inc." > DMI string system-product-name: "Express-HR" > DMI string system-version: "72120-0B10-4060" > DMI string baseboard-manufacturer: "To be filled by O.E.M." > DMI string baseboard-product-name: "To be filled by O.E.M." > DMI string baseboard-version: "To be filled by O.E.M." > DMI string chassis-type: "Desktop" > Found chipset "Intel QM67" with PCI ID 8086:1c4f. > This chipset is marked as untested. If you are using an up-to-date version > of flashrom *and* were (not) able to successfully update your firmware with it, > then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. > […] Hello Thomas, thanks for your report! I have added your chipset *and* your board to our list of supported hardware and will commit that later together with other small changes. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] HM87 test report
by Stefan Tauner 02 May '14

02 May '14

On Fri, 2 May 2014 22:59:14 +0400 Vasiliy Vylegzhanin <6vasia(a)gmail.com> wrote: > On Fri, May 2, 2014 at 10:52 PM, Stefan Tauner > <stefan.tauner(a)alumni.tuwien.ac.at> wrote: > > On Fri, 2 May 2014 04:06:39 +0400 > > Vasiliy Vylegzhanin <6vasia(a)gmail.com> wrote: > > > >> On Fri, May 2, 2014 at 3:28 AM, Stefan Tauner > >> <stefan.tauner(a)alumni.tuwien.ac.at> wrote: > >> > On Fri, 2 May 2014 00:44:41 +0400 > >> > Vasiliy Vylegzhanin <6vasia(a)gmail.com> wrote: > >> > > >> >> On Fri, May 2, 2014 at 12:06 AM, Stefan Tauner > >> >> <stefan.tauner(a)alumni.tuwien.ac.at> wrote: > >> >> > Also interesting would be what board that is? > >> >> > >> >> MSI GT60 notebook. Also, I had some HM77 based notebooks, which I > >> >> could test, if any left. > >> > > >> > There are two versions of the GT60, which one is it? > >> > http://www.msi.com/product/nb/GT60_2OC.html#specification > >> > http://www.msi.com/product/nb/GT60_0NC.html#?div=Specification > >> > >> GT60 20D :) http://www.msi.com/product/nb/GT60_2OD.html#specification > > > > OK, thank you! I have added your laptop to our list of supported > > hardware and will commit that later together with other small changes. > > > > -- > > Kind regards/Mit freundlichen Grüßen, Stefan Tauner > > I am not sure, if this notebook is fully supported by upstream > flashrom. I use layout patches, cause on most intel-based boards ROMs > have locked regions. Right, thanks for noticing that, I have missed it. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] HM87 test report
by Stefan Tauner 02 May '14

02 May '14

On Fri, 2 May 2014 04:06:39 +0400 Vasiliy Vylegzhanin <6vasia(a)gmail.com> wrote: > On Fri, May 2, 2014 at 3:28 AM, Stefan Tauner > <stefan.tauner(a)alumni.tuwien.ac.at> wrote: > > On Fri, 2 May 2014 00:44:41 +0400 > > Vasiliy Vylegzhanin <6vasia(a)gmail.com> wrote: > > > >> On Fri, May 2, 2014 at 12:06 AM, Stefan Tauner > >> <stefan.tauner(a)alumni.tuwien.ac.at> wrote: > >> > Also interesting would be what board that is? > >> > >> MSI GT60 notebook. Also, I had some HM77 based notebooks, which I > >> could test, if any left. > > > > There are two versions of the GT60, which one is it? > > http://www.msi.com/product/nb/GT60_2OC.html#specification > > http://www.msi.com/product/nb/GT60_0NC.html#?div=Specification > > GT60 20D :) http://www.msi.com/product/nb/GT60_2OD.html#specification OK, thank you! I have added your laptop to our list of supported hardware and will commit that later together with other small changes. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

TYAN Computer Corp. S2721-533 Thunder i7501 Pro/S2721-533 Thunder i7501 Pro
by Bozhan Boiadzhiev 02 May '14

02 May '14

TYAN Computer Corp. S2721-533 Thunder i7501 Pro/S2721-533 Thunder i7501 Pro root@satlan:~/tyan_bios# flashrom -p internal -V flashrom v0.9.6.1-r1563 on Linux 3.11-2-686-pae (i686) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.9, GCC 4.7.1, little endian Command line (3 args): flashrom -p internal -V Calibrating delay loop... OS timer resolution is 1 usecs, 1597M loops per second, 10 myus = 11 us, 100 myus = 100 us, 1000 myus = 999 us, 10000 myus = 13228 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "TYAN Computer Corp." DMI string system-product-name: "S2721-533 Thunder i7501 Pro" DMI string system-version: "To Be Filled By O.E.M." DMI string baseboard-manufacturer: "TYAN Computer Corp." DMI string baseboard-product-name: "S2721-533 Thunder i7501 Pro" DMI string baseboard-version: " To be filled by O.E.M." DMI string chassis-type: "Desktop" Found Winbond Super I/O, id 52 Found chipset "Intel ICH3-S" with PCI ID 8086:2480. Enabling flash write... BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0 OK. The following protocols are supported: FWH. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xfb, id2 0x05, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x60 Found SST flash chip "SST49LF004A/B" (512 kB, FWH) at physical address 0xfff80000. Lock status for 0x000000 (size 0x010000) is 00, full access Lock status for 0x010000 (size 0x010000) is 00, full access Lock status for 0x020000 (size 0x010000) is 00, full access Lock status for 0x030000 (size 0x010000) is 00, full access Lock status for 0x040000 (size 0x010000) is 00, full access Lock status for 0x050000 (size 0x010000) is 00, full access Lock status for 0x060000 (size 0x010000) is 00, full access Lock status for 0x070000 (size 0x010000) is 00, full access Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xfb, id2 0x05, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xbf, id2 0x60 Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xbf, id2 0x60 Found SST flash chip "SST49LF004A/B" (512 kB, FWH). No operations were specified. Restoring PCI config space for 00:1f:0 reg 0x4e root@satlan:~/tyan_bios# lspci -nnvvxxx 00:00.0 Host bridge [0600]: Intel Corporation E7501 Memory Controller Hub [8086:254c] (rev 01) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [40] Vendor Specific Information: Len=05 <?> 00: 86 80 4c 25 06 01 90 00 01 00 00 06 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 40: 09 00 05 11 00 00 00 00 00 00 00 00 00 00 00 00 50: 04 60 0d 00 00 00 00 00 00 10 11 11 00 00 33 33 60: 00 00 00 00 08 10 10 10 00 00 00 00 00 00 00 00 70: 00 00 33 00 00 00 00 00 14 02 01 39 79 02 67 20 80: b1 0b 71 00 00 00 00 00 00 98 10 d2 8b 00 00 00 90: 00 00 00 00 00 00 00 00 55 05 55 05 03 1a 38 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 44 c0 50 11 00 40 ff 03 00 00 00 00 00 00 00 00 d0: 02 28 00 0e 03 00 00 33 80 09 31 b5 00 00 01 01 e0: 1d 1d 00 00 00 00 00 00 4e 50 00 00 00 00 00 00 f0: 00 00 00 00 74 00 30 40 40 0f 00 00 00 00 00 00 00:02.0 PCI bridge [0604]: Intel Corporation E7500/E7501 Hub Interface B PCI-to-PCI Bridge [8086:2543] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=05, subordinate=07, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fe800000-feafffff Prefetchable memory behind bridge: ff700000-ff9fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00: 86 80 43 25 07 01 a0 00 01 00 04 06 00 40 01 00 10: 00 00 00 00 00 00 00 00 00 05 07 00 d0 d0 a0 02 20: 80 fe a0 fe 70 ff 90 ff 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 3e 00 00 0e 4e 4e 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:03.0 PCI bridge [0604]: Intel Corporation E7500/E7501 Hub Interface C PCI-to-PCI Bridge [8086:2545] (rev 01) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=02, subordinate=04, sec-latency=0 Memory behind bridge: fe500000-fe7fffff Prefetchable memory behind bridge: ff400000-ff6fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00: 86 80 45 25 06 01 a0 00 01 00 04 06 00 40 01 00 10: 00 00 00 00 00 00 00 00 00 02 04 00 f0 00 a0 22 20: 50 fe 70 fe 40 ff 60 ff 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 3e 00 00 0e 4e 50 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:1d.0 USB controller [0c03]: Intel Corporation 82801CA/CAM USB Controller #1 [8086:2482] (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corporation Device [8086:2480] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at e800 [size=32] Kernel driver in use: uhci_hcd 00: 86 80 82 24 05 00 80 02 02 00 03 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 e8 00 00 00 00 00 00 00 00 00 00 86 80 80 24 30: 00 00 00 00 00 00 00 00 00 00 00 00 09 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 00 00 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 42) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fc400000-fe4fffff Prefetchable memory behind bridge: ff300000-ff3fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00: 86 80 4e 24 07 01 80 00 42 00 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 20 c0 c0 80 22 20: 40 fc 40 fe 30 ff 30 ff 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0a 00 40: 02 28 20 20 00 01 00 00 00 00 00 00 00 00 00 00 50: 02 14 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 88 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 10 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 01 00 02 00 00 00 c0 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 69 2e 00:1f.0 ISA bridge [0601]: Intel Corporation 82801CA LPC Interface Controller [8086:2480] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel driver in use: lpc_ich 00: 86 80 80 24 0f 00 80 02 02 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 01 04 00 00 10 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 01 05 00 00 10 00 00 00 60: 89 80 8b 85 d1 00 00 00 80 80 80 80 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: ff fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 02 00 00 00 00 00 00 0d 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 86 21 00 00 02 02 00 00 04 00 00 00 00 00 00 00 e0: 10 00 00 c0 00 00 0f 14 33 22 11 00 00 00 67 45 f0: 00 00 60 86 00 00 00 00 47 0f 0e 00 00 00 81 00 00:1f.1 IDE interface [0101]: Intel Corporation 82801CA Ultra ATA Storage Controller [8086:248b] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Intel Corporation Device [8086:2480] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 Region 4: I/O ports at ffa0 [size=16] Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K] Kernel driver in use: ata_piix 00: 86 80 8b 24 07 00 80 02 02 8a 01 01 00 00 00 00 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 20: a1 ff 00 00 00 00 00 40 00 00 00 00 86 80 80 24 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 40: 07 e3 03 e3 00 00 00 00 05 00 01 02 00 00 00 00 50: 00 00 00 00 30 14 00 00 00 00 00 00 00 00 00 00 60: 08 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 00 00 00:1f.3 SMBus [0c05]: Intel Corporation 82801CA/CAM SMBus Controller [8086:2483] (rev 02) Subsystem: Intel Corporation Device [8086:2480] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 0540 [size=32] Kernel driver in use: i801_smbus 00: 86 80 83 24 01 00 80 02 02 00 05 0c 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 41 05 00 00 00 00 00 00 00 00 00 00 86 80 80 24 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00 40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 00 00 01:01.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 [8086:1229] (rev 10) Subsystem: Intel Corporation EtherExpress PRO/100 S Server Adapter [8086:1040] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at fe4fe000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at c400 [size=64] Region 2: Memory at fe4a0000 (32-bit, non-prefetchable) [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME- Kernel driver in use: e100 00: 86 80 29 12 17 01 90 02 10 00 00 02 10 40 00 00 10: 00 e0 4f fe 01 c4 00 00 00 00 4a fe 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 40 10 30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 08 38 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 22 fe e0: 00 40 00 4b 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01:02.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Rage XL PCI [1002:4752] (rev 27) (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Rage XL [1002:8008] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: I/O ports at c800 [size=256] Region 2: Memory at fe4ff000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at fe4c0000 [disabled] [size=128K] Capabilities: [5c] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- 00: 02 10 52 47 87 00 90 02 27 00 00 03 10 40 00 00 10: 00 00 00 fd 01 c8 00 00 00 f0 4f fe 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 08 80 30: 00 00 4c fe 5c 00 00 00 00 00 00 00 0b 01 08 00 40: 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 02 5c 10 00 01 00 00 ff 00 00 00 00 01 00 02 06 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02:1c.0 PIC [0800]: Intel Corporation 82870P2 P64H2 I/OxAPIC [8086:1461] (rev 04) (prog-if 20 [IO(X)-APIC]) Subsystem: Intel Corporation 82870P2 P64H2 I/OxAPIC [8086:1461] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at fe7fe000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] PCI-X non-bridge device Command: DPERE- ERO- RBC=512 OST=1 Status: Dev=02:1c.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=512 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz- 00: 86 80 61 14 06 01 30 00 04 20 00 08 00 00 00 00 10: 00 e0 7f fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 61 14 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 00 00 40: 14 88 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 07 00 00 00 e0 02 03 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 3f 00 00 00 3f 00 00 00 3f 00 00 00 3f 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 96 00 00 00 96 00 00 00 96 00 00 00 96 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02:1d.0 PCI bridge [0604]: Intel Corporation 82870P2 P64H2 Hub PCI Bridge [8086:1460] (rev 04) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Bus: primary=02, secondary=04, subordinate=04, sec-latency=64 Memory behind bridge: fe600000-fe6fffff Prefetchable memory behind bridge: 00000000ff500000-00000000ff5fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=100MHz Status: Dev=02:1d.0 64bit+ 133MHz+ SCD- USC- SCO- SRD- Upstream: Capacity=65535 CommitmentLimit=65535 Downstream: Capacity=65535 CommitmentLimit=65535 00: 86 80 60 14 06 01 30 00 04 00 04 06 10 40 01 00 10: 00 00 00 00 00 00 00 00 02 04 04 40 f0 00 a0 22 20: 60 fe 60 fe 51 ff 51 ff 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 06 00 40: 80 e1 08 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 07 00 83 00 e8 02 03 00 ff ff ff ff ff ff ff ff 60: 00 04 e0 00 00 00 00 00 00 00 00 00 0f 0a 00 00 70: 00 f8 00 00 00 00 00 00 04 e8 02 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 8f c3 00 00 22 20 00 00 00 00 00 00 00 00 00 00 f0: 12 02 04 00 00 00 00 00 23 22 37 77 ff bf ff bf 02:1e.0 PIC [0800]: Intel Corporation 82870P2 P64H2 I/OxAPIC [8086:1461] (rev 04) (prog-if 20 [IO(X)-APIC]) Subsystem: Intel Corporation 82870P2 P64H2 I/OxAPIC [8086:1461] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at fe7ff000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] PCI-X non-bridge device Command: DPERE- ERO- RBC=512 OST=1 Status: Dev=02:1e.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=512 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz- 00: 86 80 61 14 06 01 30 00 04 20 00 08 00 00 00 00 10: 00 f0 7f fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 61 14 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 00 00 40: 10 88 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 07 00 00 00 f0 02 03 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 3f 00 00 00 3f 00 00 00 3f 00 00 00 3f 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02:1f.0 PCI bridge [0604]: Intel Corporation 82870P2 P64H2 Hub PCI Bridge [8086:1460] (rev 04) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Bus: primary=02, secondary=03, subordinate=03, sec-latency=64 Memory behind bridge: fe500000-fe5fffff Prefetchable memory behind bridge: 00000000ff400000-00000000ff4fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz Status: Dev=02:1f.0 64bit+ 133MHz+ SCD- USC- SCO- SRD- Upstream: Capacity=65535 CommitmentLimit=65535 Downstream: Capacity=65535 CommitmentLimit=65535 00: 86 80 60 14 06 01 30 00 04 00 04 06 10 40 01 00 10: 00 00 00 00 00 00 00 00 02 03 03 40 f0 00 a0 22 20: 50 fe 50 fe 41 ff 41 ff 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 06 00 40: c0 f1 08 00 01 00 00 00 00 00 00 00 00 00 00 00 50: 07 00 c3 00 f8 02 03 00 ff ff ff ff ff ff ff ff 60: 00 04 f0 00 00 00 00 00 00 00 00 00 0f 0a 00 00 70: 00 f8 00 00 00 00 00 00 ff ff ff ff 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 8f c3 00 00 24 20 00 00 00 00 00 00 00 00 00 00 f0: 32 02 04 c0 5b 20 00 00 23 22 37 77 ff bf ff bf 05:1c.0 PIC [0800]: Intel Corporation 82870P2 P64H2 I/OxAPIC [8086:1461] (rev 04) (prog-if 20 [IO(X)-APIC]) Subsystem: Intel Corporation 82870P2 P64H2 I/OxAPIC [8086:1461] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at feafe000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] PCI-X non-bridge device Command: DPERE- ERO- RBC=512 OST=1 Status: Dev=05:1c.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=512 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz- 00: 86 80 61 14 06 01 30 00 04 20 00 08 00 00 00 00 10: 00 e0 af fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 61 14 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 00 00 40: 04 88 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 07 00 00 00 e0 05 03 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 10 00 00 00 10 00 00 00 10 00 00 00 10 00 00 00 90: 61 a9 00 00 61 a9 00 00 61 a9 00 00 61 a9 00 00 a0: 80 00 00 00 80 00 00 00 80 00 00 00 80 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05:1d.0 PCI bridge [0604]: Intel Corporation 82870P2 P64H2 Hub PCI Bridge [8086:1460] (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Bus: primary=05, secondary=07, subordinate=07, sec-latency=64 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fe900000-fe9fffff Prefetchable memory behind bridge: 00000000ff800000-00000000ff8fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz Status: Dev=05:1d.0 64bit+ 133MHz+ SCD- USC- SCO- SRD- Upstream: Capacity=65535 CommitmentLimit=65535 Downstream: Capacity=65535 CommitmentLimit=65535 00: 86 80 60 14 07 01 30 00 04 00 04 06 10 40 01 00 10: 00 00 00 00 00 00 00 00 05 07 07 40 d0 d0 a0 02 20: 90 fe 90 fe 81 ff 81 ff 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 06 00 40: c0 f1 08 00 01 00 00 00 00 00 00 00 00 00 00 00 50: 07 00 c3 00 e8 05 03 00 ff ff ff ff ff ff ff ff 60: 00 04 e0 00 00 00 00 00 00 00 00 00 0f 0a 00 00 70: 00 f8 00 00 00 00 00 00 07 e8 05 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 8f c3 00 00 22 20 00 00 00 00 00 00 00 00 00 00 f0: 12 02 04 00 00 00 00 00 23 22 37 77 ff bf ff bf 05:1e.0 PIC [0800]: Intel Corporation 82870P2 P64H2 I/OxAPIC [8086:1461] (rev 04) (prog-if 20 [IO(X)-APIC]) Subsystem: Intel Corporation 82870P2 P64H2 I/OxAPIC [8086:1461] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] PCI-X non-bridge device Command: DPERE- ERO- RBC=512 OST=1 Status: Dev=05:1e.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=512 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz- 00: 86 80 61 14 06 01 30 00 04 20 00 08 00 00 00 00 10: 00 f0 af fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 61 14 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 00 00 40: 00 88 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 07 00 00 00 f0 05 03 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 3f 00 00 00 3f 00 00 00 3f 00 00 00 3f 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 80 00 00 00 80 00 00 00 80 00 00 00 80 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05:1f.0 PCI bridge [0604]: Intel Corporation 82870P2 P64H2 Hub PCI Bridge [8086:1460] (rev 04) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Bus: primary=05, secondary=06, subordinate=06, sec-latency=64 Memory behind bridge: fe800000-fe8fffff Prefetchable memory behind bridge: 00000000ff700000-00000000ff7fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] PCI-X bridge device Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz Status: Dev=05:1f.0 64bit+ 133MHz+ SCD- USC- SCO- SRD- Upstream: Capacity=65535 CommitmentLimit=65535 Downstream: Capacity=65535 CommitmentLimit=65535 00: 86 80 60 14 06 01 30 00 04 00 04 06 10 40 01 00 10: 00 00 00 00 00 00 00 00 05 06 06 40 f0 00 a0 22 20: 80 fe 80 fe 71 ff 71 ff 00 00 00 00 00 00 00 00 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 06 00 40: c0 f1 08 00 01 00 00 00 00 00 00 00 00 00 00 00 50: 07 00 c3 00 f8 05 03 00 ff ff ff ff ff ff ff ff 60: 00 04 f0 00 00 00 00 00 00 00 00 00 0f 0a 00 00 70: 00 f8 00 00 00 00 00 00 ff ff ff ff 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 8f c3 00 00 23 20 00 00 00 00 00 00 00 00 00 00 f0: 32 02 04 c2 5b 21 00 00 23 22 37 77 ff bf ff bf 07:01.0 Ethernet controller [0200]: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) [8086:1010] (rev 01) Subsystem: Intel Corporation PRO/1000 MT Dual Port Server Adapter [8086:1011] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (63750ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 48 Region 0: Memory at fe9c0000 (64-bit, non-prefetchable) [size=128K] Region 4: I/O ports at d400 [size=64] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [e4] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=1 Status: Dev=07:01.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz- Capabilities: [f0] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Kernel driver in use: e1000 00: 86 80 10 10 17 01 30 02 01 00 00 02 10 40 80 00 10: 04 00 9c fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 d4 00 00 00 00 00 00 00 00 00 00 86 80 11 10 30: 00 00 00 00 dc 00 00 00 00 00 00 00 09 01 ff 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 e4 22 48 e0: 00 20 00 28 07 f0 02 00 08 07 43 04 00 00 00 00 f0: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 07:01.1 Ethernet controller [0200]: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) [8086:1010] (rev 01) Subsystem: Intel Corporation PRO/1000 MT Dual Port Server Adapter [8086:1011] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (63750ns min), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 49 Region 0: Memory at fe9e0000 (64-bit, non-prefetchable) [size=128K] Region 4: I/O ports at d800 [size=64] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [e4] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=1 Status: Dev=07:01.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz- Capabilities: [f0] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Kernel driver in use: e1000 00: 86 80 10 10 17 01 30 02 01 00 00 02 10 40 80 00 10: 04 00 9e fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 d8 00 00 00 00 00 00 00 00 00 00 86 80 11 10 30: 00 00 00 00 dc 00 00 00 00 00 00 00 09 02 ff 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 e4 22 48 e0: 00 20 00 28 07 f0 02 00 09 07 43 04 00 00 00 00 f0: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 root@satlan:~/tyan_bios# superiotool -deV superiotool r6637 Probing for ALi Super I/O at 0x3f0... Failed. Returned data: id=0xffff, rev=0xff Probing for ALi Super I/O at 0x370... Failed. Returned data: id=0xffff, rev=0xff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0x44fe, id=0x1752 Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for Fintek Super I/O at 0x2e... Failed. Returned data: vid=0x0000, id=0x0000 Probing for Fintek Super I/O at 0x4e... Failed. Returned data: vid=0xffff, id=0xffff Probing for ITE Super I/O (init=standard) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8502e) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x25e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=standard) at 0x2e... Failed. Returned data: id=0x0000, rev=0x0 Probing for ITE Super I/O (init=it8502e) at 0x2e... Failed. Returned data: id=0x0000, rev=0x0 Probing for ITE Super I/O (init=it8761e) at 0x2e... Failed. Returned data: id=0x0000, rev=0x0 Probing for ITE Super I/O (init=it8228e) at 0x2e... Failed. Returned data: id=0x0000, rev=0x0 Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... Failed. Returned data: id=0x5217, rev=0xf Probing for ITE Super I/O (init=standard) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8502e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8761e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=it8228e) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... Failed. Returned data: id=0xffff, rev=0xf Probing for NSC Super I/O at 0x2e... Failed. Returned data: port=0x00, port+1=0x00 Probing for NSC Super I/O at 0x4e... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x15c... Failed. Returned data: port=0xff, port+1=0xff Probing for NSC Super I/O at 0x164e... Failed. Returned data: port=0xff, port+1=0xff Probing for Nuvoton Super I/O at 0x164e... Failed. Returned data: chip_id=0xffff Probing for Nuvoton Super I/O (sid=0xfc) at 0x164e... Failed. Returned data: sid=0xff, id=0xffff, rev=0x00 Probing for Nuvoton Super I/O at 0x2e... Failed. Returned data: chip_id=0x5217 Probing for Nuvoton Super I/O (sid=0xfc) at 0x2e... Failed. Returned data: sid=0x00, id=0x5217, rev=0x00 Probing for Nuvoton Super I/O at 0x4e... Failed. Returned data: chip_id=0xffff Probing for Nuvoton Super I/O (sid=0xfc) at 0x4e... Failed. Returned data: sid=0xff, id=0xffff, rev=0x00 Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... Failed. Returned data: id=0x00, rev=0x00 Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... Failed. Returned data: id=0x00, rev=0x00 Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... Failed. Returned data: id=0xff, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x2e... Failed. Returned data: id/oldid=0x00/0x00, rev=0x00 Probing for Winbond Super I/O (init=0x89) at 0x2e... Failed. Returned data: id/oldid=0x00/0x00, rev=0x00 Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... Failed. Returned data: id/oldid=0x00/0x00, rev=0x00 Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... Found Winbond W83627HF/F/HG/G (id=0x52, rev=0x17) at 0x2e Register dump: idx 02 20 21 22 23 24 25 26 28 29 2a 2b 2c 2e 2f val ff 52 17 ff fe 44 00 00 00 00 7c 00 ff 00 ff def 00 52 NA ff 00 MM 00 00 00 00 7c c0 00 00 00 LDN 0x00 (Floppy) idx 30 60 61 70 74 f0 f1 f2 f4 f5 val 00 03 f0 06 02 0e 00 ff 00 00 def 01 03 f0 06 02 0e 00 ff 00 00 LDN 0x01 (Parallel port) idx 30 60 61 70 74 f0 val 00 03 78 00 04 3c def 01 03 78 07 04 3f LDN 0x02 (COM1) idx 30 60 61 70 f0 val 00 03 f8 04 00 def 01 03 f8 04 00 LDN 0x03 (COM2) idx 30 60 61 70 f0 f1 val 00 02 f8 03 00 00 def 01 02 f8 03 00 00 LDN 0x05 (Keyboard) idx 30 60 61 62 63 70 72 f0 val 01 00 60 00 64 01 0c 82 def 01 00 60 00 64 01 0c 80 LDN 0x06 (Consumer IR) idx 30 60 61 70 val 01 03 e0 0a def 00 00 00 00 LDN 0x07 (Game port, MIDI port, GPIO 1) idx 30 60 61 62 63 70 f0 f1 f2 val 00 02 01 03 30 00 ff ff ff def 00 02 01 03 30 09 ff 00 00 LDN 0x08 (GPIO 2, watchdog timer) idx 30 f0 f1 f2 f3 f5 f6 f6 f7 val 00 ff ff ff 00 40 00 00 00 def 00 ff 00 00 00 00 00 00 00 LDN 0x09 (GPIO 3) idx 30 f0 f1 f2 f3 val 00 ff ff ff 00 def 00 ff 00 00 00 LDN 0x0a (ACPI) idx 30 70 e0 e1 e2 e3 e4 e5 e6 e7 f0 f1 f3 f4 f6 f7 f9 fe ff val 00 00 00 00 20 00 00 00 00 00 00 cf 30 00 00 00 00 00 00 def 00 00 00 00 NA NA 00 00 00 00 00 00 00 00 00 00 00 00 00 LDN 0x0b (Hardware monitor) idx 30 60 61 70 f0 val 01 02 90 00 00 def 00 00 00 00 00 Hardware monitor (0x0295) Probing for Winbond Super I/O (init=0x88) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x88) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x89) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff Probing for VIA Super I/O at 0x3f0... PCI device 1106:0686 not found. Probing for Server Engines Super I/O at 0x2e... Failed. Returned data: id=0x0000, rev=0x00

2 1

Re: [flashrom] Pegatron IPP7A-CP: flashrom -V
by Stefan Tauner 02 May '14

02 May '14

Hello Илья, thanks for your report! I have added your board to our list of supported hardware and will commit that later together with other small changes. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

Report: Gigabyte X79-UP4 F5c write
by George Spelvin 02 May '14

02 May '14

After the built-in Q-Bios would not program the flash ("The current flash utility is outdated"), and failing to find where Gigabyte hid the DOS-based flash utilities, I fired up flashrom. I got the latest r1764 from SVN, and it proceeded to complain about Macronix's ambiguous chip IDs: [501]# flashrom -p internal flashrom v0.9.7-r1764 on Linux 3.12.1-00045-g27b879d64d (x86_64) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "Intel X79". Enabling flash write... OK. Found Macronix flash chip "MX25L6405(D)" (8192 kB, SPI) at physical address 0xff800000. Found Macronix flash chip "MX25L6406E/MX25L6436E" (8192 kB, SPI) at physical address 0xff800000. Found Macronix flash chip "MX25L6445E" (8192 kB, SPI) at physical address 0xff800000. Multiple flash chip definitions match the detected chip(s): "MX25L6405(D)", "MX25L6406E/MX25L6436E", "MX25L6445E" Please specify which chip definition to use with the -c <chipname> option. After failing to read the chip ID without removing my motherboard, I found a high-resolution picture at http://forums.overclockers.co.uk/showthread.php?t=18477560 (search for "The DualBIOS chips.") This confirmed the Flash as MX25L6406E, so I added the appropriate -c option, and... success! It had to reboot a few times before popping into the BIOS, but it worked. The only problem is that the BIOS settings were blown away (a fairly simple reset procedure) and my ethernet MAC address got reset to 88:88:88:88:87:88 (working on fixing that). Looking in the -V output, I see some mention of 0x54: 0x00000000 FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-write. 0x58: 0x07ff0000 FREG1: BIOS region (0x00000000-0x007fffff) is read-write. 0x5C: 0x01ff0003 FREG2: Management Engine region (0x00003000-0x001fffff) is read-write. 0x60: 0x00020001 FREG3: Gigabit Ethernet region (0x00001000-0x00002fff) is read-write. And, indeed, the 4K pages at 0x001000 and 0x002000 include the old MAC address in the first 8 bytes. So let me try creating a layout file: 000000:000fff descriptor 001000:002fff enet 003000:01ffff management 020000:7fffff bios And try restoring that oprtion from the backup I took: flashrom -p internal -c MX25L6406E/MX25L6436E -V -l layout -i enet -w X79UP4.F2a flashrom v0.9.7-r1764 on Linux 3.12.1-00045-g27b879d64d (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.0, GCC 4.8.2, little endian Command line (11 args): flashrom -p internal -c MX25L6406E/MX25L6436E -V -l layout -i enet -w X79UP4.F2a romlayout 00000000 - 00000fff named descriptor romlayout 00001000 - 00002fff named enet romlayout 00003000 - 0001ffff named management romlayout 00020000 - 007fffff named bios Using region: "enet". Calibrating delay loop... OS timer resolution is 1 usecs, 3546M loops per second, 10 myus = 10 us, 100 myus = 95 us, 1000 myus = 939 us, 10000 myus = 9345 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. Using Internal DMI decoder. DMI string chassis-type: "Desktop" DMI string system-manufacturer: "Gigabyte Technology Co., Ltd." DMI string system-product-name: "To be filled by O.E.M." DMI string system-version: "To be filled by O.E.M." DMI string baseboard-manufacturer: "Gigabyte Technology Co., Ltd." DMI string baseboard-product-name: "X79-UP4" DMI string baseboard-version: "To be filled by O.E.M." Found ITE Super I/O, ID 0x8728 on port 0x2e Found chipset "Intel X79" with PCI ID 8086:1d41. Enabling flash write... Root Complex Register Block address = 0xfed1c000 GCS = 0xc04: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x3 (SPI) Top Swap : not enabled 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytesSPI Read Configuration: prefetching enabled, caching enabled, BIOS_CNTL = 0x09: BIOS Lock Enable: disabled, BIOS Write Enable: enabled SPIBAR = 0xf772c000 + 0x3800 0x04: 0x6008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=0 Programming OPCODES... done 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x50: 0x0000ffff (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff 0x54: 0x00000000 FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-write. 0x58: 0x07ff0000 FREG1: BIOS region (0x00000000-0x007fffff) is read-write. 0x5C: 0x01ff0003 FREG2: Management Engine region (0x00003000-0x001fffff) is read-write. 0x60: 0x00020001 FREG3: Gigabit Ethernet region (0x00001000-0x00002fff) is read-write. 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf87f10 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=0 0x94: 0x5006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x00002005 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xC8: 0x00002005 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x00000000 (FPB) OK. No IT87* serial flash segment enabled. The following protocols are supported: FWH, SPI. Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2017 Found Macronix flash chip "MX25L6406E/MX25L6436E" (8192 kB, SPI) at physical address 0xff800000. Chip status register is 0x00. Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set Chip status register: Bit 6 is not set Chip status register: Block Protect 3 (BP3) is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:S, 0x001000-0x001fff:EW, 0x002000-0x002fff:EW, 0x003000-0x003fff:S, 0x004000-0x004fff:S, 0x005000-0x005fff:S, 0x006000-0x006fff:S, 0x007000-0x007fff:S, 0x008000-0x008fff:S, 0x009000-0x009fff:S, 0x00a000-0x00afff:S, 0x00b000-0x00bfff:S, 0x00c000-0x00cfff:S, 0x00d000-0x00dfff:S, 0x00e000-0x00efff:S, 0x00f000-0x00ffff:S, 0x010000-0x010fff:S, 0x011000-0x011fff:S, 0x012000-0x012fff:S, 0x013000-0x013fff:S, 0x014000-0x014fff:S, 0x015000-0x015fff:S, 0x016000-0x016fff:S, 0x017000-0x017fff:S, 0x018000-0x018fff:S, 0x019000-0x019fff:S, 0x01a000-0x01afff:S, 0x01b000-0x01bfff:S, 0x01c000-0x01cfff:S, 0x01d000-0x01dfff:S, 0x01e000-0x01efff:S, 0x01f000-0x01ffff:S, 0x020000-0x020fff:S, 0x021000-0x021fff:S, 0x022000-0x022fff:S, 0x023000-0x023fff:S, 0x024000-0x024fff:S, 0x025000-0x025fff:S, 0x026000-0x026fff:S, 0x027000-0x027fff:S, 0x028000-0x028fff:S, 0x029000-0x029fff:S, 0x02a000-0x02afff:S, 0x02b000-0x02bfff:S, 0x02c000-0x02cfff:S, 0x02d000-0x02dfff:S, 0x02e000-0x02efff:S, 0x02f000-0x02ffff:S, 0x030000-0x030fff:S, 0x031000-0x031fff:S, 0x032000-0x032fff:S, 0x033000-0x033fff:S, 0x034000-0x034fff:S, 0x035000-0x035fff:S, 0x036000-0x036fff:S, 0x037000-0x037fff:S, 0x038000-0x038fff:S, 0x039000-0x039fff:S, 0x03a000-0x03afff:S, 0x03b000-0x03bfff:S, 0x03c000-0x03cfff:S, 0x03d000-0x03dfff:S, 0x03e000-0x03efff:S, 0x03f000-0x03ffff:S, 0x040000-0x040fff:S, 0x041000-0x041fff:S, 0x042000-0x042fff:S, 0x043000-0x043fff:S, 0x044000-0x044fff:S, 0x045000-0x045fff:S, 0x046000-0x046fff:S, 0x047000-0x047fff:S, 0x048000-0x048fff:S, 0x049000-0x049fff:S, 0x04a000-0x04afff:S, 0x04b000-0x04bfff:S, 0x04c000-0x04cfff:S, 0x04d000-0x04dfff:S, 0x04e000-0x04efff:S, 0x04f000-0x04ffff:S, 0x050000-0x050fff:S, 0x051000-0x051fff:S, 0x052000-0x052fff:S, 0x053000-0x053fff:S, 0x054000-0x054fff:S, 0x055000-0x055fff:S, 0x056000-0x056fff:S, 0x057000-0x057fff:S, 0x058000-0x058fff:S, 0x059000-0x059fff:S, 0x05a000-0x05afff:S, 0x05b000-0x05bfff:S, 0x05c000-0x05cfff:S, 0x05d000-0x05dfff:S, 0x05e000-0x05efff:S, 0x05f000-0x05ffff:S, 0x060000-0x060fff:S, 0x061000-0x061fff:S, 0x062000-0x062fff:S, 0x063000-0x063fff:S, 0x064000-0x064fff:S, 0x065000-0x065fff:S, 0x066000-0x066fff:S, 0x067000-0x067fff:S, 0x068000-0x068fff:S, 0x069000-0x069fff:S, 0x06a000-0x06afff:S, 0x06b000-0x06bfff:S, 0x06c000-0x06cfff:S, 0x06d000-0x06dfff:S, 0x06e000-0x06efff:S, 0x06f000-0x06ffff:S, 0x070000-0x070fff:S, 0x071000-0x071fff:S, 0x072000-0x072fff:S, 0x073000-0x073fff:S, 0x074000-0x074fff:S, 0x075000-0x075fff:S, 0x076000-0x076fff:S, 0x077000-0x077fff:S, 0x078000-0x078fff:S, 0x079000-0x079fff:S, 0x07a000-0x07afff:S, 0x07b000-0x07bfff:S, 0x07c000-0x07cfff:S, 0x07d000-0x07dfff:S, 0x07e000-0x07efff:S, 0x07f000-0x07ffff:S, 0x080000-0x080fff:S, 0x081000-0x081fff:S, 0x082000-0x082fff:S, 0x083000-0x083fff:S, 0x084000-0x084fff:S, 0x085000-0x085fff:S, 0x086000-0x086fff:S, 0x087000-0x087fff:S, 0x088000-0x088fff:S, 0x089000-0x089fff:S, 0x08a000-0x08afff:S, 0x08b000-0x08bfff:S, 0x08c000-0x08cfff:S, 0x08d000-0x08dfff:S, 0x08e000-0x08efff:S, 0x08f000-0x08ffff:S, 0x090000-0x090fff:S, 0x091000-0x091fff:S, 0x092000-0x092fff:S, 0x093000-0x093fff:S, 0x094000-0x094fff:S, 0x095000-0x095fff:S, 0x096000-0x096fff:S, 0x097000-0x097fff:S, 0x098000-0x098fff:S, 0x099000-0x099fff:S, 0x09a000-0x09afff:S, 0x09b000-0x09bfff:S, 0x09c000-0x09cfff:S, 0x09d000-0x09dfff:S, 0x09e000-0x09efff:S, 0x09f000-0x09ffff:S, 0x0a0000-0x0a0fff:S, 0x0a1000-0x0a1fff:S, 0x0a2000-0x0a2fff:S, 0x0a3000-0x0a3fff:S, 0x0a4000-0x0a4fff:S, 0x0a5000-0x0a5fff:S, 0x0a6000-0x0a6fff:S, 0x0a7000-0x0a7fff:S, 0x0a8000-0x0a8fff:S, 0x0a9000-0x0a9fff:S, 0x0aa000-0x0aafff:S, 0x0ab000-0x0abfff:S, 0x0ac000-0x0acfff:S, 0x0ad000-0x0adfff:S, 0x0ae000-0x0aefff:S, 0x0af000-0x0affff:S, 0x0b0000-0x0b0fff:S, 0x0b1000-0x0b1fff:S, 0x0b2000-0x0b2fff:S, 0x0b3000-0x0b3fff:S, 0x0b4000-0x0b4fff:S, 0x0b5000-0x0b5fff:S, 0x0b6000-0x0b6fff:S, 0x0b7000-0x0b7fff:S, 0x0b8000-0x0b8fff:S, 0x0b9000-0x0b9fff:S, 0x0ba000-0x0bafff:S, 0x0bb000-0x0bbfff:S, 0x0bc000-0x0bcfff:S, 0x0bd000-0x0bdfff:S, 0x0be000-0x0befff:S, 0x0bf000-0x0bffff:S, 0x0c0000-0x0c0fff:S, 0x0c1000-0x0c1fff:S, 0x0c2000-0x0c2fff:S, 0x0c3000-0x0c3fff:S, 0x0c4000-0x0c4fff:S, 0x0c5000-0x0c5fff:S, 0x0c6000-0x0c6fff:S, 0x0c7000-0x0c7fff:S, 0x0c8000-0x0c8fff:S, 0x0c9000-0x0c9fff:S, 0x0ca000-0x0cafff:S, 0x0cb000-0x0cbfff:S, 0x0cc000-0x0ccfff:S, 0x0cd000-0x0cdfff:S, 0x0ce000-0x0cefff:S, 0x0cf000-0x0cffff:S, 0x0d0000-0x0d0fff:S, 0x0d1000-0x0d1fff:S, 0x0d2000-0x0d2fff:S, 0x0d3000-0x0d3fff:S, 0x0d4000-0x0d4fff:S, 0x0d5000-0x0d5fff:S, 0x0d6000-0x0d6fff:S, 0x0d7000-0x0d7fff:S, 0x0d8000-0x0d8fff:S, 0x0d9000-0x0d9fff:S, 0x0da000-0x0dafff:S, 0x0db000-0x0dbfff:S, 0x0dc000-0x0dcfff:S, 0x0dd000-0x0ddfff:S, 0x0de000-0x0defff:S, 0x0df000-0x0dffff:S, 0x0e0000-0x0e0fff:S, 0x0e1000-0x0e1fff:S, 0x0e2000-0x0e2fff:S, 0x0e3000-0x0e3fff:S, 0x0e4000-0x0e4fff:S, 0x0e5000-0x0e5fff:S, 0x0e6000-0x0e6fff:S, 0x0e7000-0x0e7fff:S, 0x0e8000-0x0e8fff:S, 0x0e9000-0x0e9fff:S, 0x0ea000-0x0eafff:S, 0x0eb000-0x0ebfff:S, 0x0ec000-0x0ecfff:S, 0x0ed000-0x0edfff:S, 0x0ee000-0x0eefff:S, 0x0ef000-0x0effff:S, 0x0f0000-0x0f0fff:S, 0x0f1000-0x0f1fff:S, 0x0f2000-0x0f2fff:S, 0x0f3000-0x0f3fff:S, 0x0f4000-0x0f4fff:S, 0x0f5000-0x0f5fff:S, 0x0f6000-0x0f6fff:S, 0x0f7000-0x0f7fff:S, 0x0f8000-0x0f8fff:S, 0x0f9000-0x0f9fff:S, 0x0fa000-0x0fafff:S, 0x0fb000-0x0fbfff:S, 0x0fc000-0x0fcfff:S, 0x0fd000-0x0fdfff:S, 0x0fe000-0x0fefff:S, 0x0ff000-0x0fffff:S, 0x100000-0x100fff:S, 0x101000-0x101fff:S, 0x102000-0x102fff:S, 0x103000-0x103fff:S, 0x104000-0x104fff:S, 0x105000-0x105fff:S, 0x106000-0x106fff:S, 0x107000-0x107fff:S, 0x108000-0x108fff:S, 0x109000-0x109fff:S, 0x10a000-0x10afff:S, 0x10b000-0x10bfff:S, 0x10c000-0x10cfff:S, 0x10d000-0x10dfff:S, 0x10e000-0x10efff:S, 0x10f000-0x10ffff:S, 0x110000-0x110fff:S, 0x111000-0x111fff:S, 0x112000-0x112fff:S, 0x113000-0x113fff:S, 0x114000-0x114fff:S, 0x115000-0x115fff:S, 0x116000-0x116fff:S, 0x117000-0x117fff:S, 0x118000-0x118fff:S, 0x119000-0x119fff:S, 0x11a000-0x11afff:S, 0x11b000-0x11bfff:S, 0x11c000-0x11cfff:S, 0x11d000-0x11dfff:S, 0x11e000-0x11efff:S, 0x11f000-0x11ffff:S, 0x120000-0x120fff:S, 0x121000-0x121fff:S, 0x122000-0x122fff:S, 0x123000-0x123fff:S, 0x124000-0x124fff:S, 0x125000-0x125fff:S, 0x126000-0x126fff:S, 0x127000-0x127fff:S, 0x128000-0x128fff:S, 0x129000-0x129fff:S, 0x12a000-0x12afff:S, 0x12b000-0x12bfff:S, 0x12c000-0x12cfff:S, 0x12d000-0x12dfff:S, 0x12e000-0x12efff:S, 0x12f000-0x12ffff:S, 0x130000-0x130fff:S, 0x131000-0x131fff:S, 0x132000-0x132fff:S, 0x133000-0x133fff:S, 0x134000-0x134fff:S, 0x135000-0x135fff:S, 0x136000-0x136fff:S, 0x137000-0x137fff:S, 0x138000-0x138fff:S, 0x139000-0x139fff:S, 0x13a000-0x13afff:S, 0x13b000-0x13bfff:S, 0x13c000-0x13cfff:S, 0x13d000-0x13dfff:S, 0x13e000-0x13efff:S, 0x13f000-0x13ffff:S, 0x140000-0x140fff:S, 0x141000-0x141fff:S, 0x142000-0x142fff:S, 0x143000-0x143fff:S, 0x144000-0x144fff:S, 0x145000-0x145fff:S, 0x146000-0x146fff:S, 0x147000-0x147fff:S, 0x148000-0x148fff:S, 0x149000-0x149fff:S, 0x14a000-0x14afff:S, 0x14b000-0x14bfff:S, 0x14c000-0x14cfff:S, 0x14d000-0x14dfff:S, 0x14e000-0x14efff:S, 0x14f000-0x14ffff:S, 0x150000-0x150fff:S, 0x151000-0x151fff:S, 0x152000-0x152fff:S, 0x153000-0x153fff:S, 0x154000-0x154fff:S, 0x155000-0x155fff:S, 0x156000-0x156fff:S, 0x157000-0x157fff:S, 0x158000-0x158fff:S, 0x159000-0x159fff:S, 0x15a000-0x15afff:S, 0x15b000-0x15bfff:S, 0x15c000-0x15cfff:S, 0x15d000-0x15dfff:S, 0x15e000-0x15efff:S, 0x15f000-0x15ffff:S, 0x160000-0x160fff:S, 0x161000-0x161fff:S, 0x162000-0x162fff:S, 0x163000-0x163fff:S, 0x164000-0x164fff:S, 0x165000-0x165fff:S, 0x166000-0x166fff:S, 0x167000-0x167fff:S, 0x168000-0x168fff:S, 0x169000-0x169fff:S, 0x16a000-0x16afff:S, 0x16b000-0x16bfff:S, 0x16c000-0x16cfff:S, 0x16d000-0x16dfff:S, 0x16e000-0x16efff:S, 0x16f000-0x16ffff:S, 0x170000-0x170fff:S, 0x171000-0x171fff:S, 0x172000-0x172fff:S, 0x173000-0x173fff:S, 0x174000-0x174fff:S, 0x175000-0x175fff:S, 0x176000-0x176fff:S, 0x177000-0x177fff:S, 0x178000-0x178fff:S, 0x179000-0x179fff:S, 0x17a000-0x17afff:S, 0x17b000-0x17bfff:S, 0x17c000-0x17cfff:S, 0x17d000-0x17dfff:S, 0x17e000-0x17efff:S, 0x17f000-0x17ffff:S, 0x180000-0x180fff:S, 0x181000-0x181fff:S, 0x182000-0x182fff:S, 0x183000-0x183fff:S, 0x184000-0x184fff:S, 0x185000-0x185fff:S, 0x186000-0x186fff:S, 0x187000-0x187fff:S, 0x188000-0x188fff:S, 0x189000-0x189fff:S, 0x18a000-0x18afff:S, 0x18b000-0x18bfff:S, 0x18c000-0x18cfff:S, 0x18d000-0x18dfff:S, 0x18e000-0x18efff:S, 0x18f000-0x18ffff:S, 0x190000-0x190fff:S, 0x191000-0x191fff:S, 0x192000-0x192fff:S, 0x193000-0x193fff:S, 0x194000-0x194fff:S, 0x195000-0x195fff:S, 0x196000-0x196fff:S, 0x197000-0x197fff:S, 0x198000-0x198fff:S, 0x199000-0x199fff:S, 0x19a000-0x19afff:S, 0x19b000-0x19bfff:S, 0x19c000-0x19cfff:S, 0x19d000-0x19dfff:S, 0x19e000-0x19efff:S, 0x19f000-0x19ffff:S, 0x1a0000-0x1a0fff:S, 0x1a1000-0x1a1fff:S, 0x1a2000-0x1a2fff:S, 0x1a3000-0x1a3fff:S, 0x1a4000-0x1a4fff:S, 0x1a5000-0x1a5fff:S, 0x1a6000-0x1a6fff:S, 0x1a7000-0x1a7fff:S, 0x1a8000-0x1a8fff:S, 0x1a9000-0x1a9fff:S, 0x1aa000-0x1aafff:S, 0x1ab000-0x1abfff:S, 0x1ac000-0x1acfff:S, 0x1ad000-0x1adfff:S, 0x1ae000-0x1aefff:S, 0x1af000-0x1affff:S, 0x1b0000-0x1b0fff:S, 0x1b1000-0x1b1fff:S, 0x1b2000-0x1b2fff:S, 0x1b3000-0x1b3fff:S, 0x1b4000-0x1b4fff:S, 0x1b5000-0x1b5fff:S, 0x1b6000-0x1b6fff:S, 0x1b7000-0x1b7fff:S, 0x1b8000-0x1b8fff:S, 0x1b9000-0x1b9fff:S, 0x1ba000-0x1bafff:S, 0x1bb000-0x1bbfff:S, 0x1bc000-0x1bcfff:S, 0x1bd000-0x1bdfff:S, 0x1be000-0x1befff:S, 0x1bf000-0x1bffff:S, 0x1c0000-0x1c0fff:S, 0x1c1000-0x1c1fff:S, 0x1c2000-0x1c2fff:S, 0x1c3000-0x1c3fff:S, 0x1c4000-0x1c4fff:S, 0x1c5000-0x1c5fff:S, 0x1c6000-0x1c6fff:S, 0x1c7000-0x1c7fff:S, 0x1c8000-0x1c8fff:S, 0x1c9000-0x1c9fff:S, 0x1ca000-0x1cafff:S, 0x1cb000-0x1cbfff:S, 0x1cc000-0x1ccfff:S, 0x1cd000-0x1cdfff:S, 0x1ce000-0x1cefff:S, 0x1cf000-0x1cffff:S, 0x1d0000-0x1d0fff:S, 0x1d1000-0x1d1fff:S, 0x1d2000-0x1d2fff:S, 0x1d3000-0x1d3fff:S, 0x1d4000-0x1d4fff:S, 0x1d5000-0x1d5fff:S, 0x1d6000-0x1d6fff:S, 0x1d7000-0x1d7fff:S, 0x1d8000-0x1d8fff:S, 0x1d9000-0x1d9fff:S, 0x1da000-0x1dafff:S, 0x1db000-0x1dbfff:S, 0x1dc000-0x1dcfff:S, 0x1dd000-0x1ddfff:S, 0x1de000-0x1defff:S, 0x1df000-0x1dffff:S, 0x1e0000-0x1e0fff:S, 0x1e1000-0x1e1fff:S, 0x1e2000-0x1e2fff:S, 0x1e3000-0x1e3fff:S, 0x1e4000-0x1e4fff:S, 0x1e5000-0x1e5fff:S, 0x1e6000-0x1e6fff:S, 0x1e7000-0x1e7fff:S, 0x1e8000-0x1e8fff:S, 0x1e9000-0x1e9fff:S, 0x1ea000-0x1eafff:S, 0x1eb000-0x1ebfff:S, 0x1ec000-0x1ecfff:S, 0x1ed000-0x1edfff:S, 0x1ee000-0x1eefff:S, 0x1ef000-0x1effff:S, 0x1f0000-0x1f0fff:S, 0x1f1000-0x1f1fff:S, 0x1f2000-0x1f2fff:S, 0x1f3000-0x1f3fff:S, 0x1f4000-0x1f4fff:S, 0x1f5000-0x1f5fff:S, 0x1f6000-0x1f6fff:S, 0x1f7000-0x1f7fff:S, 0x1f8000-0x1f8fff:S, 0x1f9000-0x1f9fff:S, 0x1fa000-0x1fafff:S, 0x1fb000-0x1fbfff:S, 0x1fc000-0x1fcfff:S, 0x1fd000-0x1fdfff:S, 0x1fe000-0x1fefff:S, 0x1ff000-0x1fffff:S, 0x200000-0x200fff:S, 0x201000-0x201fff:S, 0x202000-0x202fff:S, 0x203000-0x203fff:S, 0x204000-0x204fff:S, 0x205000-0x205fff:S, 0x206000-0x206fff:S, 0x207000-0x207fff:S, 0x208000-0x208fff:S, 0x209000-0x209fff:S, 0x20a000-0x20afff:S, 0x20b000-0x20bfff:S, 0x20c000-0x20cfff:S, 0x20d000-0x20dfff:S, 0x20e000-0x20efff:S, 0x20f000-0x20ffff:S, 0x210000-0x210fff:S, 0x211000-0x211fff:S, 0x212000-0x212fff:S, 0x213000-0x213fff:S, 0x214000-0x214fff:S, 0x215000-0x215fff:S, 0x216000-0x216fff:S, 0x217000-0x217fff:S, 0x218000-0x218fff:S, 0x219000-0x219fff:S, 0x21a000-0x21afff:S, 0x21b000-0x21bfff:S, 0x21c000-0x21cfff:S, 0x21d000-0x21dfff:S, 0x21e000-0x21efff:S, 0x21f000-0x21ffff:S, 0x220000-0x220fff:S, 0x221000-0x221fff:S, 0x222000-0x222fff:S, 0x223000-0x223fff:S, 0x224000-0x224fff:S, 0x225000-0x225fff:S, 0x226000-0x226fff:S, 0x227000-0x227fff:S, 0x228000-0x228fff:S, 0x229000-0x229fff:S, 0x22a000-0x22afff:S, 0x22b000-0x22bfff:S, 0x22c000-0x22cfff:S, 0x22d000-0x22dfff:S, 0x22e000-0x22efff:S, 0x22f000-0x22ffff:S, 0x230000-0x230fff:S, 0x231000-0x231fff:S, 0x232000-0x232fff:S, 0x233000-0x233fff:S, 0x234000-0x234fff:S, 0x235000-0x235fff:S, 0x236000-0x236fff:S, 0x237000-0x237fff:S, 0x238000-0x238fff:S, 0x239000-0x239fff:S, 0x23a000-0x23afff:S, 0x23b000-0x23bfff:S, 0x23c000-0x23cfff:S, 0x23d000-0x23dfff:S, 0x23e000-0x23efff:S, 0x23f000-0x23ffff:S, 0x240000-0x240fff:S, 0x241000-0x241fff:S, 0x242000-0x242fff:S, 0x243000-0x243fff:S, 0x244000-0x244fff:S, 0x245000-0x245fff:S, 0x246000-0x246fff:S, 0x247000-0x247fff:S, 0x248000-0x248fff:S, 0x249000-0x249fff:S, 0x24a000-0x24afff:S, 0x24b000-0x24bfff:S, 0x24c000-0x24cfff:S, 0x24d000-0x24dfff:S, 0x24e000-0x24efff:S, 0x24f000-0x24ffff:S, 0x250000-0x250fff:S, 0x251000-0x251fff:S, 0x252000-0x252fff:S, 0x253000-0x253fff:S, 0x254000-0x254fff:S, 0x255000-0x255fff:S, 0x256000-0x256fff:S, 0x257000-0x257fff:S, 0x258000-0x258fff:S, 0x259000-0x259fff:S, 0x25a000-0x25afff:S, 0x25b000-0x25bfff:S, 0x25c000-0x25cfff:S, 0x25d000-0x25dfff:S, 0x25e000-0x25efff:S, 0x25f000-0x25ffff:S, 0x260000-0x260fff:S, 0x261000-0x261fff:S, 0x262000-0x262fff:S, 0x263000-0x263fff:S, 0x264000-0x264fff:S, 0x265000-0x265fff:S, 0x266000-0x266fff:S, 0x267000-0x267fff:S, 0x268000-0x268fff:S, 0x269000-0x269fff:S, 0x26a000-0x26afff:S, 0x26b000-0x26bfff:S, 0x26c000-0x26cfff:S, 0x26d000-0x26dfff:S, 0x26e000-0x26efff:S, 0x26f000-0x26ffff:S, 0x270000-0x270fff:S, 0x271000-0x271fff:S, 0x272000-0x272fff:S, 0x273000-0x273fff:S, 0x274000-0x274fff:S, 0x275000-0x275fff:S, 0x276000-0x276fff:S, 0x277000-0x277fff:S, 0x278000-0x278fff:S, 0x279000-0x279fff:S, 0x27a000-0x27afff:S, 0x27b000-0x27bfff:S, 0x27c000-0x27cfff:S, 0x27d000-0x27dfff:S, 0x27e000-0x27efff:S, 0x27f000-0x27ffff:S, 0x280000-0x280fff:S, 0x281000-0x281fff:S, 0x282000-0x282fff:S, 0x283000-0x283fff:S, 0x284000-0x284fff:S, 0x285000-0x285fff:S, 0x286000-0x286fff:S, 0x287000-0x287fff:S, 0x288000-0x288fff:S, 0x289000-0x289fff:S, 0x28a000-0x28afff:S, 0x28b000-0x28bfff:S, 0x28c000-0x28cfff:S, 0x28d000-0x28dfff:S, 0x28e000-0x28efff:S, 0x28f000-0x28ffff:S, 0x290000-0x290fff:S, 0x291000-0x291fff:S, 0x292000-0x292fff:S, 0x293000-0x293fff:S, 0x294000-0x294fff:S, 0x295000-0x295fff:S, 0x296000-0x296fff:S, 0x297000-0x297fff:S, 0x298000-0x298fff:S, 0x299000-0x299fff:S, 0x29a000-0x29afff:S, 0x29b000-0x29bfff:S, 0x29c000-0x29cfff:S, 0x29d000-0x29dfff:S, 0x29e000-0x29efff:S, 0x29f000-0x29ffff:S, 0x2a0000-0x2a0fff:S, 0x2a1000-0x2a1fff:S, 0x2a2000-0x2a2fff:S, 0x2a3000-0x2a3fff:S, 0x2a4000-0x2a4fff:S, 0x2a5000-0x2a5fff:S, 0x2a6000-0x2a6fff:S, 0x2a7000-0x2a7fff:S, 0x2a8000-0x2a8fff:S, 0x2a9000-0x2a9fff:S, 0x2aa000-0x2aafff:S, 0x2ab000-0x2abfff:S, 0x2ac000-0x2acfff:S, 0x2ad000-0x2adfff:S, 0x2ae000-0x2aefff:S, 0x2af000-0x2affff:S, 0x2b0000-0x2b0fff:S, 0x2b1000-0x2b1fff:S, 0x2b2000-0x2b2fff:S, 0x2b3000-0x2b3fff:S, 0x2b4000-0x2b4fff:S, 0x2b5000-0x2b5fff:S, 0x2b6000-0x2b6fff:S, 0x2b7000-0x2b7fff:S, 0x2b8000-0x2b8fff:S, 0x2b9000-0x2b9fff:S, 0x2ba000-0x2bafff:S, 0x2bb000-0x2bbfff:S, 0x2bc000-0x2bcfff:S, 0x2bd000-0x2bdfff:S, 0x2be000-0x2befff:S, 0x2bf000-0x2bffff:S, 0x2c0000-0x2c0fff:S, 0x2c1000-0x2c1fff:S, 0x2c2000-0x2c2fff:S, 0x2c3000-0x2c3fff:S, 0x2c4000-0x2c4fff:S, 0x2c5000-0x2c5fff:S, 0x2c6000-0x2c6fff:S, 0x2c7000-0x2c7fff:S, 0x2c8000-0x2c8fff:S, 0x2c9000-0x2c9fff:S, 0x2ca000-0x2cafff:S, 0x2cb000-0x2cbfff:S, 0x2cc000-0x2ccfff:S, 0x2cd000-0x2cdfff:S, 0x2ce000-0x2cefff:S, 0x2cf000-0x2cffff:S, 0x2d0000-0x2d0fff:S, 0x2d1000-0x2d1fff:S, 0x2d2000-0x2d2fff:S, 0x2d3000-0x2d3fff:S, 0x2d4000-0x2d4fff:S, 0x2d5000-0x2d5fff:S, 0x2d6000-0x2d6fff:S, 0x2d7000-0x2d7fff:S, 0x2d8000-0x2d8fff:S, 0x2d9000-0x2d9fff:S, 0x2da000-0x2dafff:S, 0x2db000-0x2dbfff:S, 0x2dc000-0x2dcfff:S, 0x2dd000-0x2ddfff:S, 0x2de000-0x2defff:S, 0x2df000-0x2dffff:S, 0x2e0000-0x2e0fff:S, 0x2e1000-0x2e1fff:S, 0x2e2000-0x2e2fff:S, 0x2e3000-0x2e3fff:S, 0x2e4000-0x2e4fff:S, 0x2e5000-0x2e5fff:S, 0x2e6000-0x2e6fff:S, 0x2e7000-0x2e7fff:S, 0x2e8000-0x2e8fff:S, 0x2e9000-0x2e9fff:S, 0x2ea000-0x2eafff:S, 0x2eb000-0x2ebfff:S, 0x2ec000-0x2ecfff:S, 0x2ed000-0x2edfff:S, 0x2ee000-0x2eefff:S, 0x2ef000-0x2effff:S, 0x2f0000-0x2f0fff:S, 0x2f1000-0x2f1fff:S, 0x2f2000-0x2f2fff:S, 0x2f3000-0x2f3fff:S, 0x2f4000-0x2f4fff:S, 0x2f5000-0x2f5fff:S, 0x2f6000-0x2f6fff:S, 0x2f7000-0x2f7fff:S, 0x2f8000-0x2f8fff:S, 0x2f9000-0x2f9fff:S, 0x2fa000-0x2fafff:S, 0x2fb000-0x2fbfff:S, 0x2fc000-0x2fcfff:S, 0x2fd000-0x2fdfff:S, 0x2fe000-0x2fefff:S, 0x2ff000-0x2fffff:S, 0x300000-0x300fff:S, 0x301000-0x301fff:S, 0x302000-0x302fff:S, 0x303000-0x303fff:S, 0x304000-0x304fff:S, 0x305000-0x305fff:S, 0x306000-0x306fff:S, 0x307000-0x307fff:S, 0x308000-0x308fff:S, 0x309000-0x309fff:S, 0x30a000-0x30afff:S, 0x30b000-0x30bfff:S, 0x30c000-0x30cfff:S, 0x30d000-0x30dfff:S, 0x30e000-0x30efff:S, 0x30f000-0x30ffff:S, 0x310000-0x310fff:S, 0x311000-0x311fff:S, 0x312000-0x312fff:S, 0x313000-0x313fff:S, 0x314000-0x314fff:S, 0x315000-0x315fff:S, 0x316000-0x316fff:S, 0x317000-0x317fff:S, 0x318000-0x318fff:S, 0x319000-0x319fff:S, 0x31a000-0x31afff:S, 0x31b000-0x31bfff:S, 0x31c000-0x31cfff:S, 0x31d000-0x31dfff:S, 0x31e000-0x31efff:S, 0x31f000-0x31ffff:S, 0x320000-0x320fff:S, 0x321000-0x321fff:S, 0x322000-0x322fff:S, 0x323000-0x323fff:S, 0x324000-0x324fff:S, 0x325000-0x325fff:S, 0x326000-0x326fff:S, 0x327000-0x327fff:S, 0x328000-0x328fff:S, 0x329000-0x329fff:S, 0x32a000-0x32afff:S, 0x32b000-0x32bfff:S, 0x32c000-0x32cfff:S, 0x32d000-0x32dfff:S, 0x32e000-0x32efff:S, 0x32f000-0x32ffff:S, 0x330000-0x330fff:S, 0x331000-0x331fff:S, 0x332000-0x332fff:S, 0x333000-0x333fff:S, 0x334000-0x334fff:S, 0x335000-0x335fff:S, 0x336000-0x336fff:S, 0x337000-0x337fff:S, 0x338000-0x338fff:S, 0x339000-0x339fff:S, 0x33a000-0x33afff:S, 0x33b000-0x33bfff:S, 0x33c000-0x33cfff:S, 0x33d000-0x33dfff:S, 0x33e000-0x33efff:S, 0x33f000-0x33ffff:S, 0x340000-0x340fff:S, 0x341000-0x341fff:S, 0x342000-0x342fff:S, 0x343000-0x343fff:S, 0x344000-0x344fff:S, 0x345000-0x345fff:S, 0x346000-0x346fff:S, 0x347000-0x347fff:S, 0x348000-0x348fff:S, 0x349000-0x349fff:S, 0x34a000-0x34afff:S, 0x34b000-0x34bfff:S, 0x34c000-0x34cfff:S, 0x34d000-0x34dfff:S, 0x34e000-0x34efff:S, 0x34f000-0x34ffff:S, 0x350000-0x350fff:S, 0x351000-0x351fff:S, 0x352000-0x352fff:S, 0x353000-0x353fff:S, 0x354000-0x354fff:S, 0x355000-0x355fff:S, 0x356000-0x356fff:S, 0x357000-0x357fff:S, 0x358000-0x358fff:S, 0x359000-0x359fff:S, 0x35a000-0x35afff:S, 0x35b000-0x35bfff:S, 0x35c000-0x35cfff:S, 0x35d000-0x35dfff:S, 0x35e000-0x35efff:S, 0x35f000-0x35ffff:S, 0x360000-0x360fff:S, 0x361000-0x361fff:S, 0x362000-0x362fff:S, 0x363000-0x363fff:S, 0x364000-0x364fff:S, 0x365000-0x365fff:S, 0x366000-0x366fff:S, 0x367000-0x367fff:S, 0x368000-0x368fff:S, 0x369000-0x369fff:S, 0x36a000-0x36afff:S, 0x36b000-0x36bfff:S, 0x36c000-0x36cfff:S, 0x36d000-0x36dfff:S, 0x36e000-0x36efff:S, 0x36f000-0x36ffff:S, 0x370000-0x370fff:S, 0x371000-0x371fff:S, 0x372000-0x372fff:S, 0x373000-0x373fff:S, 0x374000-0x374fff:S, 0x375000-0x375fff:S, 0x376000-0x376fff:S, 0x377000-0x377fff:S, 0x378000-0x378fff:S, 0x379000-0x379fff:S, 0x37a000-0x37afff:S, 0x37b000-0x37bfff:S, 0x37c000-0x37cfff:S, 0x37d000-0x37dfff:S, 0x37e000-0x37efff:S, 0x37f000-0x37ffff:S, 0x380000-0x380fff:S, 0x381000-0x381fff:S, 0x382000-0x382fff:S, 0x383000-0x383fff:S, 0x384000-0x384fff:S, 0x385000-0x385fff:S, 0x386000-0x386fff:S, 0x387000-0x387fff:S, 0x388000-0x388fff:S, 0x389000-0x389fff:S, 0x38a000-0x38afff:S, 0x38b000-0x38bfff:S, 0x38c000-0x38cfff:S, 0x38d000-0x38dfff:S, 0x38e000-0x38efff:S, 0x38f000-0x38ffff:S, 0x390000-0x390fff:S, 0x391000-0x391fff:S, 0x392000-0x392fff:S, 0x393000-0x393fff:S, 0x394000-0x394fff:S, 0x395000-0x395fff:S, 0x396000-0x396fff:S, 0x397000-0x397fff:S, 0x398000-0x398fff:S, 0x399000-0x399fff:S, 0x39a000-0x39afff:S, 0x39b000-0x39bfff:S, 0x39c000-0x39cfff:S, 0x39d000-0x39dfff:S, 0x39e000-0x39efff:S, 0x39f000-0x39ffff:S, 0x3a0000-0x3a0fff:S, 0x3a1000-0x3a1fff:S, 0x3a2000-0x3a2fff:S, 0x3a3000-0x3a3fff:S, 0x3a4000-0x3a4fff:S, 0x3a5000-0x3a5fff:S, 0x3a6000-0x3a6fff:S, 0x3a7000-0x3a7fff:S, 0x3a8000-0x3a8fff:S, 0x3a9000-0x3a9fff:S, 0x3aa000-0x3aafff:S, 0x3ab000-0x3abfff:S, 0x3ac000-0x3acfff:S, 0x3ad000-0x3adfff:S, 0x3ae000-0x3aefff:S, 0x3af000-0x3affff:S, 0x3b0000-0x3b0fff:S, 0x3b1000-0x3b1fff:S, 0x3b2000-0x3b2fff:S, 0x3b3000-0x3b3fff:S, 0x3b4000-0x3b4fff:S, 0x3b5000-0x3b5fff:S, 0x3b6000-0x3b6fff:S, 0x3b7000-0x3b7fff:S, 0x3b8000-0x3b8fff:S, 0x3b9000-0x3b9fff:S, 0x3ba000-0x3bafff:S, 0x3bb000-0x3bbfff:S, 0x3bc000-0x3bcfff:S, 0x3bd000-0x3bdfff:S, 0x3be000-0x3befff:S, 0x3bf000-0x3bffff:S, 0x3c0000-0x3c0fff:S, 0x3c1000-0x3c1fff:S, 0x3c2000-0x3c2fff:S, 0x3c3000-0x3c3fff:S, 0x3c4000-0x3c4fff:S, 0x3c5000-0x3c5fff:S, 0x3c6000-0x3c6fff:S, 0x3c7000-0x3c7fff:S, 0x3c8000-0x3c8fff:S, 0x3c9000-0x3c9fff:S, 0x3ca000-0x3cafff:S, 0x3cb000-0x3cbfff:S, 0x3cc000-0x3ccfff:S, 0x3cd000-0x3cdfff:S, 0x3ce000-0x3cefff:S, 0x3cf000-0x3cffff:S, 0x3d0000-0x3d0fff:S, 0x3d1000-0x3d1fff:S, 0x3d2000-0x3d2fff:S, 0x3d3000-0x3d3fff:S, 0x3d4000-0x3d4fff:S, 0x3d5000-0x3d5fff:S, 0x3d6000-0x3d6fff:S, 0x3d7000-0x3d7fff:S, 0x3d8000-0x3d8fff:S, 0x3d9000-0x3d9fff:S, 0x3da000-0x3dafff:S, 0x3db000-0x3dbfff:S, 0x3dc000-0x3dcfff:S, 0x3dd000-0x3ddfff:S, 0x3de000-0x3defff:S, 0x3df000-0x3dffff:S, 0x3e0000-0x3e0fff:S, 0x3e1000-0x3e1fff:S, 0x3e2000-0x3e2fff:S, 0x3e3000-0x3e3fff:S, 0x3e4000-0x3e4fff:S, 0x3e5000-0x3e5fff:S, 0x3e6000-0x3e6fff:S, 0x3e7000-0x3e7fff:S, 0x3e8000-0x3e8fff:S, 0x3e9000-0x3e9fff:S, 0x3ea000-0x3eafff:S, 0x3eb000-0x3ebfff:S, 0x3ec000-0x3ecfff:S, 0x3ed000-0x3edfff:S, 0x3ee000-0x3eefff:S, 0x3ef000-0x3effff:S, 0x3f0000-0x3f0fff:S, 0x3f1000-0x3f1fff:S, 0x3f2000-0x3f2fff:S, 0x3f3000-0x3f3fff:S, 0x3f4000-0x3f4fff:S, 0x3f5000-0x3f5fff:S, 0x3f6000-0x3f6fff:S, 0x3f7000-0x3f7fff:S, 0x3f8000-0x3f8fff:S, 0x3f9000-0x3f9fff:S, 0x3fa000-0x3fafff:S, 0x3fb000-0x3fbfff:S, 0x3fc000-0x3fcfff:S, 0x3fd000-0x3fdfff:S, 0x3fe000-0x3fefff:S, 0x3ff000-0x3fffff:S, 0x400000-0x400fff:S, 0x401000-0x401fff:S, 0x402000-0x402fff:S, 0x403000-0x403fff:S, 0x404000-0x404fff:S, 0x405000-0x405fff:S, 0x406000-0x406fff:S, 0x407000-0x407fff:S, 0x408000-0x408fff:S, 0x409000-0x409fff:S, 0x40a000-0x40afff:S, 0x40b000-0x40bfff:S, 0x40c000-0x40cfff:S, 0x40d000-0x40dfff:S, 0x40e000-0x40efff:S, 0x40f000-0x40ffff:S, 0x410000-0x410fff:S, 0x411000-0x411fff:S, 0x412000-0x412fff:S, 0x413000-0x413fff:S, 0x414000-0x414fff:S, 0x415000-0x415fff:S, 0x416000-0x416fff:S, 0x417000-0x417fff:S, 0x418000-0x418fff:S, 0x419000-0x419fff:S, 0x41a000-0x41afff:S, 0x41b000-0x41bfff:S, 0x41c000-0x41cfff:S, 0x41d000-0x41dfff:S, 0x41e000-0x41efff:S, 0x41f000-0x41ffff:S, 0x420000-0x420fff:S, 0x421000-0x421fff:S, 0x422000-0x422fff:S, 0x423000-0x423fff:S, 0x424000-0x424fff:S, 0x425000-0x425fff:S, 0x426000-0x426fff:S, 0x427000-0x427fff:S, 0x428000-0x428fff:S, 0x429000-0x429fff:S, 0x42a000-0x42afff:S, 0x42b000-0x42bfff:S, 0x42c000-0x42cfff:S, 0x42d000-0x42dfff:S, 0x42e000-0x42efff:S, 0x42f000-0x42ffff:S, 0x430000-0x430fff:S, 0x431000-0x431fff:S, 0x432000-0x432fff:S, 0x433000-0x433fff:S, 0x434000-0x434fff:S, 0x435000-0x435fff:S, 0x436000-0x436fff:S, 0x437000-0x437fff:S, 0x438000-0x438fff:S, 0x439000-0x439fff:S, 0x43a000-0x43afff:S, 0x43b000-0x43bfff:S, 0x43c000-0x43cfff:S, 0x43d000-0x43dfff:S, 0x43e000-0x43efff:S, 0x43f000-0x43ffff:S, 0x440000-0x440fff:S, 0x441000-0x441fff:S, 0x442000-0x442fff:S, 0x443000-0x443fff:S, 0x444000-0x444fff:S, 0x445000-0x445fff:S, 0x446000-0x446fff:S, 0x447000-0x447fff:S, 0x448000-0x448fff:S, 0x449000-0x449fff:S, 0x44a000-0x44afff:S, 0x44b000-0x44bfff:S, 0x44c000-0x44cfff:S, 0x44d000-0x44dfff:S, 0x44e000-0x44efff:S, 0x44f000-0x44ffff:S, 0x450000-0x450fff:S, 0x451000-0x451fff:S, 0x452000-0x452fff:S, 0x453000-0x453fff:S, 0x454000-0x454fff:S, 0x455000-0x455fff:S, 0x456000-0x456fff:S, 0x457000-0x457fff:S, 0x458000-0x458fff:S, 0x459000-0x459fff:S, 0x45a000-0x45afff:S, 0x45b000-0x45bfff:S, 0x45c000-0x45cfff:S, 0x45d000-0x45dfff:S, 0x45e000-0x45efff:S, 0x45f000-0x45ffff:S, 0x460000-0x460fff:S, 0x461000-0x461fff:S, 0x462000-0x462fff:S, 0x463000-0x463fff:S, 0x464000-0x464fff:S, 0x465000-0x465fff:S, 0x466000-0x466fff:S, 0x467000-0x467fff:S, 0x468000-0x468fff:S, 0x469000-0x469fff:S, 0x46a000-0x46afff:S, 0x46b000-0x46bfff:S, 0x46c000-0x46cfff:S, 0x46d000-0x46dfff:S, 0x46e000-0x46efff:S, 0x46f000-0x46ffff:S, 0x470000-0x470fff:S, 0x471000-0x471fff:S, 0x472000-0x472fff:S, 0x473000-0x473fff:S, 0x474000-0x474fff:S, 0x475000-0x475fff:S, 0x476000-0x476fff:S, 0x477000-0x477fff:S, 0x478000-0x478fff:S, 0x479000-0x479fff:S, 0x47a000-0x47afff:S, 0x47b000-0x47bfff:S, 0x47c000-0x47cfff:S, 0x47d000-0x47dfff:S, 0x47e000-0x47efff:S, 0x47f000-0x47ffff:S, 0x480000-0x480fff:S, 0x481000-0x481fff:S, 0x482000-0x482fff:S, 0x483000-0x483fff:S, 0x484000-0x484fff:S, 0x485000-0x485fff:S, 0x486000-0x486fff:S, 0x487000-0x487fff:S, 0x488000-0x488fff:S, 0x489000-0x489fff:S, 0x48a000-0x48afff:S, 0x48b000-0x48bfff:S, 0x48c000-0x48cfff:S, 0x48d000-0x48dfff:S, 0x48e000-0x48efff:S, 0x48f000-0x48ffff:S, 0x490000-0x490fff:S, 0x491000-0x491fff:S, 0x492000-0x492fff:S, 0x493000-0x493fff:S, 0x494000-0x494fff:S, 0x495000-0x495fff:S, 0x496000-0x496fff:S, 0x497000-0x497fff:S, 0x498000-0x498fff:S, 0x499000-0x499fff:S, 0x49a000-0x49afff:S, 0x49b000-0x49bfff:S, 0x49c000-0x49cfff:S, 0x49d000-0x49dfff:S, 0x49e000-0x49efff:S, 0x49f000-0x49ffff:S, 0x4a0000-0x4a0fff:S, 0x4a1000-0x4a1fff:S, 0x4a2000-0x4a2fff:S, 0x4a3000-0x4a3fff:S, 0x4a4000-0x4a4fff:S, 0x4a5000-0x4a5fff:S, 0x4a6000-0x4a6fff:S, 0x4a7000-0x4a7fff:S, 0x4a8000-0x4a8fff:S, 0x4a9000-0x4a9fff:S, 0x4aa000-0x4aafff:S, 0x4ab000-0x4abfff:S, 0x4ac000-0x4acfff:S, 0x4ad000-0x4adfff:S, 0x4ae000-0x4aefff:S, 0x4af000-0x4affff:S, 0x4b0000-0x4b0fff:S, 0x4b1000-0x4b1fff:S, 0x4b2000-0x4b2fff:S, 0x4b3000-0x4b3fff:S, 0x4b4000-0x4b4fff:S, 0x4b5000-0x4b5fff:S, 0x4b6000-0x4b6fff:S, 0x4b7000-0x4b7fff:S, 0x4b8000-0x4b8fff:S, 0x4b9000-0x4b9fff:S, 0x4ba000-0x4bafff:S, 0x4bb000-0x4bbfff:S, 0x4bc000-0x4bcfff:S, 0x4bd000-0x4bdfff:S, 0x4be000-0x4befff:S, 0x4bf000-0x4bffff:S, 0x4c0000-0x4c0fff:S, 0x4c1000-0x4c1fff:S, 0x4c2000-0x4c2fff:S, 0x4c3000-0x4c3fff:S, 0x4c4000-0x4c4fff:S, 0x4c5000-0x4c5fff:S, 0x4c6000-0x4c6fff:S, 0x4c7000-0x4c7fff:S, 0x4c8000-0x4c8fff:S, 0x4c9000-0x4c9fff:S, 0x4ca000-0x4cafff:S, 0x4cb000-0x4cbfff:S, 0x4cc000-0x4ccfff:S, 0x4cd000-0x4cdfff:S, 0x4ce000-0x4cefff:S, 0x4cf000-0x4cffff:S, 0x4d0000-0x4d0fff:S, 0x4d1000-0x4d1fff:S, 0x4d2000-0x4d2fff:S, 0x4d3000-0x4d3fff:S, 0x4d4000-0x4d4fff:S, 0x4d5000-0x4d5fff:S, 0x4d6000-0x4d6fff:S, 0x4d7000-0x4d7fff:S, 0x4d8000-0x4d8fff:S, 0x4d9000-0x4d9fff:S, 0x4da000-0x4dafff:S, 0x4db000-0x4dbfff:S, 0x4dc000-0x4dcfff:S, 0x4dd000-0x4ddfff:S, 0x4de000-0x4defff:S, 0x4df000-0x4dffff:S, 0x4e0000-0x4e0fff:S, 0x4e1000-0x4e1fff:S, 0x4e2000-0x4e2fff:S, 0x4e3000-0x4e3fff:S, 0x4e4000-0x4e4fff:S, 0x4e5000-0x4e5fff:S, 0x4e6000-0x4e6fff:S, 0x4e7000-0x4e7fff:S, 0x4e8000-0x4e8fff:S, 0x4e9000-0x4e9fff:S, 0x4ea000-0x4eafff:S, 0x4eb000-0x4ebfff:S, 0x4ec000-0x4ecfff:S, 0x4ed000-0x4edfff:S, 0x4ee000-0x4eefff:S, 0x4ef000-0x4effff:S, 0x4f0000-0x4f0fff:S, 0x4f1000-0x4f1fff:S, 0x4f2000-0x4f2fff:S, 0x4f3000-0x4f3fff:S, 0x4f4000-0x4f4fff:S, 0x4f5000-0x4f5fff:S, 0x4f6000-0x4f6fff:S, 0x4f7000-0x4f7fff:S, 0x4f8000-0x4f8fff:S, 0x4f9000-0x4f9fff:S, 0x4fa000-0x4fafff:S, 0x4fb000-0x4fbfff:S, 0x4fc000-0x4fcfff:S, 0x4fd000-0x4fdfff:S, 0x4fe000-0x4fefff:S, 0x4ff000-0x4fffff:S, 0x500000-0x500fff:S, 0x501000-0x501fff:S, 0x502000-0x502fff:S, 0x503000-0x503fff:S, 0x504000-0x504fff:S, 0x505000-0x505fff:S, 0x506000-0x506fff:S, 0x507000-0x507fff:S, 0x508000-0x508fff:S, 0x509000-0x509fff:S, 0x50a000-0x50afff:S, 0x50b000-0x50bfff:S, 0x50c000-0x50cfff:S, 0x50d000-0x50dfff:S, 0x50e000-0x50efff:S, 0x50f000-0x50ffff:S, 0x510000-0x510fff:S, 0x511000-0x511fff:S, 0x512000-0x512fff:S, 0x513000-0x513fff:S, 0x514000-0x514fff:S, 0x515000-0x515fff:S, 0x516000-0x516fff:S, 0x517000-0x517fff:S, 0x518000-0x518fff:S, 0x519000-0x519fff:S, 0x51a000-0x51afff:S, 0x51b000-0x51bfff:S, 0x51c000-0x51cfff:S, 0x51d000-0x51dfff:S, 0x51e000-0x51efff:S, 0x51f000-0x51ffff:S, 0x520000-0x520fff:S, 0x521000-0x521fff:S, 0x522000-0x522fff:S, 0x523000-0x523fff:S, 0x524000-0x524fff:S, 0x525000-0x525fff:S, 0x526000-0x526fff:S, 0x527000-0x527fff:S, 0x528000-0x528fff:S, 0x529000-0x529fff:S, 0x52a000-0x52afff:S, 0x52b000-0x52bfff:S, 0x52c000-0x52cfff:S, 0x52d000-0x52dfff:S, 0x52e000-0x52efff:S, 0x52f000-0x52ffff:S, 0x530000-0x530fff:S, 0x531000-0x531fff:S, 0x532000-0x532fff:S, 0x533000-0x533fff:S, 0x534000-0x534fff:S, 0x535000-0x535fff:S, 0x536000-0x536fff:S, 0x537000-0x537fff:S, 0x538000-0x538fff:S, 0x539000-0x539fff:S, 0x53a000-0x53afff:S, 0x53b000-0x53bfff:S, 0x53c000-0x53cfff:S, 0x53d000-0x53dfff:S, 0x53e000-0x53efff:S, 0x53f000-0x53ffff:S, 0x540000-0x540fff:S, 0x541000-0x541fff:S, 0x542000-0x542fff:S, 0x543000-0x543fff:S, 0x544000-0x544fff:S, 0x545000-0x545fff:S, 0x546000-0x546fff:S, 0x547000-0x547fff:S, 0x548000-0x548fff:S, 0x549000-0x549fff:S, 0x54a000-0x54afff:S, 0x54b000-0x54bfff:S, 0x54c000-0x54cfff:S, 0x54d000-0x54dfff:S, 0x54e000-0x54efff:S, 0x54f000-0x54ffff:S, 0x550000-0x550fff:S, 0x551000-0x551fff:S, 0x552000-0x552fff:S, 0x553000-0x553fff:S, 0x554000-0x554fff:S, 0x555000-0x555fff:S, 0x556000-0x556fff:S, 0x557000-0x557fff:S, 0x558000-0x558fff:S, 0x559000-0x559fff:S, 0x55a000-0x55afff:S, 0x55b000-0x55bfff:S, 0x55c000-0x55cfff:S, 0x55d000-0x55dfff:S, 0x55e000-0x55efff:S, 0x55f000-0x55ffff:S, 0x560000-0x560fff:S, 0x561000-0x561fff:S, 0x562000-0x562fff:S, 0x563000-0x563fff:S, 0x564000-0x564fff:S, 0x565000-0x565fff:S, 0x566000-0x566fff:S, 0x567000-0x567fff:S, 0x568000-0x568fff:S, 0x569000-0x569fff:S, 0x56a000-0x56afff:S, 0x56b000-0x56bfff:S, 0x56c000-0x56cfff:S, 0x56d000-0x56dfff:S, 0x56e000-0x56efff:S, 0x56f000-0x56ffff:S, 0x570000-0x570fff:S, 0x571000-0x571fff:S, 0x572000-0x572fff:S, 0x573000-0x573fff:S, 0x574000-0x574fff:S, 0x575000-0x575fff:S, 0x576000-0x576fff:S, 0x577000-0x577fff:S, 0x578000-0x578fff:S, 0x579000-0x579fff:S, 0x57a000-0x57afff:S, 0x57b000-0x57bfff:S, 0x57c000-0x57cfff:S, 0x57d000-0x57dfff:S, 0x57e000-0x57efff:S, 0x57f000-0x57ffff:S, 0x580000-0x580fff:S, 0x581000-0x581fff:S, 0x582000-0x582fff:S, 0x583000-0x583fff:S, 0x584000-0x584fff:S, 0x585000-0x585fff:S, 0x586000-0x586fff:S, 0x587000-0x587fff:S, 0x588000-0x588fff:S, 0x589000-0x589fff:S, 0x58a000-0x58afff:S, 0x58b000-0x58bfff:S, 0x58c000-0x58cfff:S, 0x58d000-0x58dfff:S, 0x58e000-0x58efff:S, 0x58f000-0x58ffff:S, 0x590000-0x590fff:S, 0x591000-0x591fff:S, 0x592000-0x592fff:S, 0x593000-0x593fff:S, 0x594000-0x594fff:S, 0x595000-0x595fff:S, 0x596000-0x596fff:S, 0x597000-0x597fff:S, 0x598000-0x598fff:S, 0x599000-0x599fff:S, 0x59a000-0x59afff:S, 0x59b000-0x59bfff:S, 0x59c000-0x59cfff:S, 0x59d000-0x59dfff:S, 0x59e000-0x59efff:S, 0x59f000-0x59ffff:S, 0x5a0000-0x5a0fff:S, 0x5a1000-0x5a1fff:S, 0x5a2000-0x5a2fff:S, 0x5a3000-0x5a3fff:S, 0x5a4000-0x5a4fff:S, 0x5a5000-0x5a5fff:S, 0x5a6000-0x5a6fff:S, 0x5a7000-0x5a7fff:S, 0x5a8000-0x5a8fff:S, 0x5a9000-0x5a9fff:S, 0x5aa000-0x5aafff:S, 0x5ab000-0x5abfff:S, 0x5ac000-0x5acfff:S, 0x5ad000-0x5adfff:S, 0x5ae000-0x5aefff:S, 0x5af000-0x5affff:S, 0x5b0000-0x5b0fff:S, 0x5b1000-0x5b1fff:S, 0x5b2000-0x5b2fff:S, 0x5b3000-0x5b3fff:S, 0x5b4000-0x5b4fff:S, 0x5b5000-0x5b5fff:S, 0x5b6000-0x5b6fff:S, 0x5b7000-0x5b7fff:S, 0x5b8000-0x5b8fff:S, 0x5b9000-0x5b9fff:S, 0x5ba000-0x5bafff:S, 0x5bb000-0x5bbfff:S, 0x5bc000-0x5bcfff:S, 0x5bd000-0x5bdfff:S, 0x5be000-0x5befff:S, 0x5bf000-0x5bffff:S, 0x5c0000-0x5c0fff:S, 0x5c1000-0x5c1fff:S, 0x5c2000-0x5c2fff:S, 0x5c3000-0x5c3fff:S, 0x5c4000-0x5c4fff:S, 0x5c5000-0x5c5fff:S, 0x5c6000-0x5c6fff:S, 0x5c7000-0x5c7fff:S, 0x5c8000-0x5c8fff:S, 0x5c9000-0x5c9fff:S, 0x5ca000-0x5cafff:S, 0x5cb000-0x5cbfff:S, 0x5cc000-0x5ccfff:S, 0x5cd000-0x5cdfff:S, 0x5ce000-0x5cefff:S, 0x5cf000-0x5cffff:S, 0x5d0000-0x5d0fff:S, 0x5d1000-0x5d1fff:S, 0x5d2000-0x5d2fff:S, 0x5d3000-0x5d3fff:S, 0x5d4000-0x5d4fff:S, 0x5d5000-0x5d5fff:S, 0x5d6000-0x5d6fff:S, 0x5d7000-0x5d7fff:S, 0x5d8000-0x5d8fff:S, 0x5d9000-0x5d9fff:S, 0x5da000-0x5dafff:S, 0x5db000-0x5dbfff:S, 0x5dc000-0x5dcfff:S, 0x5dd000-0x5ddfff:S, 0x5de000-0x5defff:S, 0x5df000-0x5dffff:S, 0x5e0000-0x5e0fff:S, 0x5e1000-0x5e1fff:S, 0x5e2000-0x5e2fff:S, 0x5e3000-0x5e3fff:S, 0x5e4000-0x5e4fff:S, 0x5e5000-0x5e5fff:S, 0x5e6000-0x5e6fff:S, 0x5e7000-0x5e7fff:S, 0x5e8000-0x5e8fff:S, 0x5e9000-0x5e9fff:S, 0x5ea000-0x5eafff:S, 0x5eb000-0x5ebfff:S, 0x5ec000-0x5ecfff:S, 0x5ed000-0x5edfff:S, 0x5ee000-0x5eefff:S, 0x5ef000-0x5effff:S, 0x5f0000-0x5f0fff:S, 0x5f1000-0x5f1fff:S, 0x5f2000-0x5f2fff:S, 0x5f3000-0x5f3fff:S, 0x5f4000-0x5f4fff:S, 0x5f5000-0x5f5fff:S, 0x5f6000-0x5f6fff:S, 0x5f7000-0x5f7fff:S, 0x5f8000-0x5f8fff:S, 0x5f9000-0x5f9fff:S, 0x5fa000-0x5fafff:S, 0x5fb000-0x5fbfff:S, 0x5fc000-0x5fcfff:S, 0x5fd000-0x5fdfff:S, 0x5fe000-0x5fefff:S, 0x5ff000-0x5fffff:S, 0x600000-0x600fff:S, 0x601000-0x601fff:S, 0x602000-0x602fff:S, 0x603000-0x603fff:S, 0x604000-0x604fff:S, 0x605000-0x605fff:S, 0x606000-0x606fff:S, 0x607000-0x607fff:S, 0x608000-0x608fff:S, 0x609000-0x609fff:S, 0x60a000-0x60afff:S, 0x60b000-0x60bfff:S, 0x60c000-0x60cfff:S, 0x60d000-0x60dfff:S, 0x60e000-0x60efff:S, 0x60f000-0x60ffff:S, 0x610000-0x610fff:S, 0x611000-0x611fff:S, 0x612000-0x612fff:S, 0x613000-0x613fff:S, 0x614000-0x614fff:S, 0x615000-0x615fff:S, 0x616000-0x616fff:S, 0x617000-0x617fff:S, 0x618000-0x618fff:S, 0x619000-0x619fff:S, 0x61a000-0x61afff:S, 0x61b000-0x61bfff:S, 0x61c000-0x61cfff:S, 0x61d000-0x61dfff:S, 0x61e000-0x61efff:S, 0x61f000-0x61ffff:S, 0x620000-0x620fff:S, 0x621000-0x621fff:S, 0x622000-0x622fff:S, 0x623000-0x623fff:S, 0x624000-0x624fff:S, 0x625000-0x625fff:S, 0x626000-0x626fff:S, 0x627000-0x627fff:S, 0x628000-0x628fff:S, 0x629000-0x629fff:S, 0x62a000-0x62afff:S, 0x62b000-0x62bfff:S, 0x62c000-0x62cfff:S, 0x62d000-0x62dfff:S, 0x62e000-0x62efff:S, 0x62f000-0x62ffff:S, 0x630000-0x630fff:S, 0x631000-0x631fff:S, 0x632000-0x632fff:S, 0x633000-0x633fff:S, 0x634000-0x634fff:S, 0x635000-0x635fff:S, 0x636000-0x636fff:S, 0x637000-0x637fff:S, 0x638000-0x638fff:S, 0x639000-0x639fff:S, 0x63a000-0x63afff:S, 0x63b000-0x63bfff:S, 0x63c000-0x63cfff:S, 0x63d000-0x63dfff:S, 0x63e000-0x63efff:S, 0x63f000-0x63ffff:S, 0x640000-0x640fff:S, 0x641000-0x641fff:S, 0x642000-0x642fff:S, 0x643000-0x643fff:S, 0x644000-0x644fff:S, 0x645000-0x645fff:S, 0x646000-0x646fff:S, 0x647000-0x647fff:S, 0x648000-0x648fff:S, 0x649000-0x649fff:S, 0x64a000-0x64afff:S, 0x64b000-0x64bfff:S, 0x64c000-0x64cfff:S, 0x64d000-0x64dfff:S, 0x64e000-0x64efff:S, 0x64f000-0x64ffff:S, 0x650000-0x650fff:S, 0x651000-0x651fff:S, 0x652000-0x652fff:S, 0x653000-0x653fff:S, 0x654000-0x654fff:S, 0x655000-0x655fff:S, 0x656000-0x656fff:S, 0x657000-0x657fff:S, 0x658000-0x658fff:S, 0x659000-0x659fff:S, 0x65a000-0x65afff:S, 0x65b000-0x65bfff:S, 0x65c000-0x65cfff:S, 0x65d000-0x65dfff:S, 0x65e000-0x65efff:S, 0x65f000-0x65ffff:S, 0x660000-0x660fff:S, 0x661000-0x661fff:S, 0x662000-0x662fff:S, 0x663000-0x663fff:S, 0x664000-0x664fff:S, 0x665000-0x665fff:S, 0x666000-0x666fff:S, 0x667000-0x667fff:S, 0x668000-0x668fff:S, 0x669000-0x669fff:S, 0x66a000-0x66afff:S, 0x66b000-0x66bfff:S, 0x66c000-0x66cfff:S, 0x66d000-0x66dfff:S, 0x66e000-0x66efff:S, 0x66f000-0x66ffff:S, 0x670000-0x670fff:S, 0x671000-0x671fff:S, 0x672000-0x672fff:S, 0x673000-0x673fff:S, 0x674000-0x674fff:S, 0x675000-0x675fff:S, 0x676000-0x676fff:S, 0x677000-0x677fff:S, 0x678000-0x678fff:S, 0x679000-0x679fff:S, 0x67a000-0x67afff:S, 0x67b000-0x67bfff:S, 0x67c000-0x67cfff:S, 0x67d000-0x67dfff:S, 0x67e000-0x67efff:S, 0x67f000-0x67ffff:S, 0x680000-0x680fff:S, 0x681000-0x681fff:S, 0x682000-0x682fff:S, 0x683000-0x683fff:S, 0x684000-0x684fff:S, 0x685000-0x685fff:S, 0x686000-0x686fff:S, 0x687000-0x687fff:S, 0x688000-0x688fff:S, 0x689000-0x689fff:S, 0x68a000-0x68afff:S, 0x68b000-0x68bfff:S, 0x68c000-0x68cfff:S, 0x68d000-0x68dfff:S, 0x68e000-0x68efff:S, 0x68f000-0x68ffff:S, 0x690000-0x690fff:S, 0x691000-0x691fff:S, 0x692000-0x692fff:S, 0x693000-0x693fff:S, 0x694000-0x694fff:S, 0x695000-0x695fff:S, 0x696000-0x696fff:S, 0x697000-0x697fff:S, 0x698000-0x698fff:S, 0x699000-0x699fff:S, 0x69a000-0x69afff:S, 0x69b000-0x69bfff:S, 0x69c000-0x69cfff:S, 0x69d000-0x69dfff:S, 0x69e000-0x69efff:S, 0x69f000-0x69ffff:S, 0x6a0000-0x6a0fff:S, 0x6a1000-0x6a1fff:S, 0x6a2000-0x6a2fff:S, 0x6a3000-0x6a3fff:S, 0x6a4000-0x6a4fff:S, 0x6a5000-0x6a5fff:S, 0x6a6000-0x6a6fff:S, 0x6a7000-0x6a7fff:S, 0x6a8000-0x6a8fff:S, 0x6a9000-0x6a9fff:S, 0x6aa000-0x6aafff:S, 0x6ab000-0x6abfff:S, 0x6ac000-0x6acfff:S, 0x6ad000-0x6adfff:S, 0x6ae000-0x6aefff:S, 0x6af000-0x6affff:S, 0x6b0000-0x6b0fff:S, 0x6b1000-0x6b1fff:S, 0x6b2000-0x6b2fff:S, 0x6b3000-0x6b3fff:S, 0x6b4000-0x6b4fff:S, 0x6b5000-0x6b5fff:S, 0x6b6000-0x6b6fff:S, 0x6b7000-0x6b7fff:S, 0x6b8000-0x6b8fff:S, 0x6b9000-0x6b9fff:S, 0x6ba000-0x6bafff:S, 0x6bb000-0x6bbfff:S, 0x6bc000-0x6bcfff:S, 0x6bd000-0x6bdfff:S, 0x6be000-0x6befff:S, 0x6bf000-0x6bffff:S, 0x6c0000-0x6c0fff:S, 0x6c1000-0x6c1fff:S, 0x6c2000-0x6c2fff:S, 0x6c3000-0x6c3fff:S, 0x6c4000-0x6c4fff:S, 0x6c5000-0x6c5fff:S, 0x6c6000-0x6c6fff:S, 0x6c7000-0x6c7fff:S, 0x6c8000-0x6c8fff:S, 0x6c9000-0x6c9fff:S, 0x6ca000-0x6cafff:S, 0x6cb000-0x6cbfff:S, 0x6cc000-0x6ccfff:S, 0x6cd000-0x6cdfff:S, 0x6ce000-0x6cefff:S, 0x6cf000-0x6cffff:S, 0x6d0000-0x6d0fff:S, 0x6d1000-0x6d1fff:S, 0x6d2000-0x6d2fff:S, 0x6d3000-0x6d3fff:S, 0x6d4000-0x6d4fff:S, 0x6d5000-0x6d5fff:S, 0x6d6000-0x6d6fff:S, 0x6d7000-0x6d7fff:S, 0x6d8000-0x6d8fff:S, 0x6d9000-0x6d9fff:S, 0x6da000-0x6dafff:S, 0x6db000-0x6dbfff:S, 0x6dc000-0x6dcfff:S, 0x6dd000-0x6ddfff:S, 0x6de000-0x6defff:S, 0x6df000-0x6dffff:S, 0x6e0000-0x6e0fff:S, 0x6e1000-0x6e1fff:S, 0x6e2000-0x6e2fff:S, 0x6e3000-0x6e3fff:S, 0x6e4000-0x6e4fff:S, 0x6e5000-0x6e5fff:S, 0x6e6000-0x6e6fff:S, 0x6e7000-0x6e7fff:S, 0x6e8000-0x6e8fff:S, 0x6e9000-0x6e9fff:S, 0x6ea000-0x6eafff:S, 0x6eb000-0x6ebfff:S, 0x6ec000-0x6ecfff:S, 0x6ed000-0x6edfff:S, 0x6ee000-0x6eefff:S, 0x6ef000-0x6effff:S, 0x6f0000-0x6f0fff:S, 0x6f1000-0x6f1fff:S, 0x6f2000-0x6f2fff:S, 0x6f3000-0x6f3fff:S, 0x6f4000-0x6f4fff:S, 0x6f5000-0x6f5fff:S, 0x6f6000-0x6f6fff:S, 0x6f7000-0x6f7fff:S, 0x6f8000-0x6f8fff:S, 0x6f9000-0x6f9fff:S, 0x6fa000-0x6fafff:S, 0x6fb000-0x6fbfff:S, 0x6fc000-0x6fcfff:S, 0x6fd000-0x6fdfff:S, 0x6fe000-0x6fefff:S, 0x6ff000-0x6fffff:S, 0x700000-0x700fff:S, 0x701000-0x701fff:S, 0x702000-0x702fff:S, 0x703000-0x703fff:S, 0x704000-0x704fff:S, 0x705000-0x705fff:S, 0x706000-0x706fff:S, 0x707000-0x707fff:S, 0x708000-0x708fff:S, 0x709000-0x709fff:S, 0x70a000-0x70afff:S, 0x70b000-0x70bfff:S, 0x70c000-0x70cfff:S, 0x70d000-0x70dfff:S, 0x70e000-0x70efff:S, 0x70f000-0x70ffff:S, 0x710000-0x710fff:S, 0x711000-0x711fff:S, 0x712000-0x712fff:S, 0x713000-0x713fff:S, 0x714000-0x714fff:S, 0x715000-0x715fff:S, 0x716000-0x716fff:S, 0x717000-0x717fff:S, 0x718000-0x718fff:S, 0x719000-0x719fff:S, 0x71a000-0x71afff:S, 0x71b000-0x71bfff:S, 0x71c000-0x71cfff:S, 0x71d000-0x71dfff:S, 0x71e000-0x71efff:S, 0x71f000-0x71ffff:S, 0x720000-0x720fff:S, 0x721000-0x721fff:S, 0x722000-0x722fff:S, 0x723000-0x723fff:S, 0x724000-0x724fff:S, 0x725000-0x725fff:S, 0x726000-0x726fff:S, 0x727000-0x727fff:S, 0x728000-0x728fff:S, 0x729000-0x729fff:S, 0x72a000-0x72afff:S, 0x72b000-0x72bfff:S, 0x72c000-0x72cfff:S, 0x72d000-0x72dfff:S, 0x72e000-0x72efff:S, 0x72f000-0x72ffff:S, 0x730000-0x730fff:S, 0x731000-0x731fff:S, 0x732000-0x732fff:S, 0x733000-0x733fff:S, 0x734000-0x734fff:S, 0x735000-0x735fff:S, 0x736000-0x736fff:S, 0x737000-0x737fff:S, 0x738000-0x738fff:S, 0x739000-0x739fff:S, 0x73a000-0x73afff:S, 0x73b000-0x73bfff:S, 0x73c000-0x73cfff:S, 0x73d000-0x73dfff:S, 0x73e000-0x73efff:S, 0x73f000-0x73ffff:S, 0x740000-0x740fff:S, 0x741000-0x741fff:S, 0x742000-0x742fff:S, 0x743000-0x743fff:S, 0x744000-0x744fff:S, 0x745000-0x745fff:S, 0x746000-0x746fff:S, 0x747000-0x747fff:S, 0x748000-0x748fff:S, 0x749000-0x749fff:S, 0x74a000-0x74afff:S, 0x74b000-0x74bfff:S, 0x74c000-0x74cfff:S, 0x74d000-0x74dfff:S, 0x74e000-0x74efff:S, 0x74f000-0x74ffff:S, 0x750000-0x750fff:S, 0x751000-0x751fff:S, 0x752000-0x752fff:S, 0x753000-0x753fff:S, 0x754000-0x754fff:S, 0x755000-0x755fff:S, 0x756000-0x756fff:S, 0x757000-0x757fff:S, 0x758000-0x758fff:S, 0x759000-0x759fff:S, 0x75a000-0x75afff:S, 0x75b000-0x75bfff:S, 0x75c000-0x75cfff:S, 0x75d000-0x75dfff:S, 0x75e000-0x75efff:S, 0x75f000-0x75ffff:S, 0x760000-0x760fff:S, 0x761000-0x761fff:S, 0x762000-0x762fff:S, 0x763000-0x763fff:S, 0x764000-0x764fff:S, 0x765000-0x765fff:S, 0x766000-0x766fff:S, 0x767000-0x767fff:S, 0x768000-0x768fff:S, 0x769000-0x769fff:S, 0x76a000-0x76afff:S, 0x76b000-0x76bfff:S, 0x76c000-0x76cfff:S, 0x76d000-0x76dfff:S, 0x76e000-0x76efff:S, 0x76f000-0x76ffff:S, 0x770000-0x770fff:S, 0x771000-0x771fff:S, 0x772000-0x772fff:S, 0x773000-0x773fff:S, 0x774000-0x774fff:S, 0x775000-0x775fff:S, 0x776000-0x776fff:S, 0x777000-0x777fff:S, 0x778000-0x778fff:S, 0x779000-0x779fff:S, 0x77a000-0x77afff:S, 0x77b000-0x77bfff:S, 0x77c000-0x77cfff:S, 0x77d000-0x77dfff:S, 0x77e000-0x77efff:S, 0x77f000-0x77ffff:S, 0x780000-0x780fff:S, 0x781000-0x781fff:S, 0x782000-0x782fff:S, 0x783000-0x783fff:S, 0x784000-0x784fff:S, 0x785000-0x785fff:S, 0x786000-0x786fff:S, 0x787000-0x787fff:S, 0x788000-0x788fff:S, 0x789000-0x789fff:S, 0x78a000-0x78afff:S, 0x78b000-0x78bfff:S, 0x78c000-0x78cfff:S, 0x78d000-0x78dfff:S, 0x78e000-0x78efff:S, 0x78f000-0x78ffff:S, 0x790000-0x790fff:S, 0x791000-0x791fff:S, 0x792000-0x792fff:S, 0x793000-0x793fff:S, 0x794000-0x794fff:S, 0x795000-0x795fff:S, 0x796000-0x796fff:S, 0x797000-0x797fff:S, 0x798000-0x798fff:S, 0x799000-0x799fff:S, 0x79a000-0x79afff:S, 0x79b000-0x79bfff:S, 0x79c000-0x79cfff:S, 0x79d000-0x79dfff:S, 0x79e000-0x79efff:S, 0x79f000-0x79ffff:S, 0x7a0000-0x7a0fff:S, 0x7a1000-0x7a1fff:S, 0x7a2000-0x7a2fff:S, 0x7a3000-0x7a3fff:S, 0x7a4000-0x7a4fff:S, 0x7a5000-0x7a5fff:S, 0x7a6000-0x7a6fff:S, 0x7a7000-0x7a7fff:S, 0x7a8000-0x7a8fff:S, 0x7a9000-0x7a9fff:S, 0x7aa000-0x7aafff:S, 0x7ab000-0x7abfff:S, 0x7ac000-0x7acfff:S, 0x7ad000-0x7adfff:S, 0x7ae000-0x7aefff:S, 0x7af000-0x7affff:S, 0x7b0000-0x7b0fff:S, 0x7b1000-0x7b1fff:S, 0x7b2000-0x7b2fff:S, 0x7b3000-0x7b3fff:S, 0x7b4000-0x7b4fff:S, 0x7b5000-0x7b5fff:S, 0x7b6000-0x7b6fff:S, 0x7b7000-0x7b7fff:S, 0x7b8000-0x7b8fff:S, 0x7b9000-0x7b9fff:S, 0x7ba000-0x7bafff:S, 0x7bb000-0x7bbfff:S, 0x7bc000-0x7bcfff:S, 0x7bd000-0x7bdfff:S, 0x7be000-0x7befff:S, 0x7bf000-0x7bffff:S, 0x7c0000-0x7c0fff:S, 0x7c1000-0x7c1fff:S, 0x7c2000-0x7c2fff:S, 0x7c3000-0x7c3fff:S, 0x7c4000-0x7c4fff:S, 0x7c5000-0x7c5fff:S, 0x7c6000-0x7c6fff:S, 0x7c7000-0x7c7fff:S, 0x7c8000-0x7c8fff:S, 0x7c9000-0x7c9fff:S, 0x7ca000-0x7cafff:S, 0x7cb000-0x7cbfff:S, 0x7cc000-0x7ccfff:S, 0x7cd000-0x7cdfff:S, 0x7ce000-0x7cefff:S, 0x7cf000-0x7cffff:S, 0x7d0000-0x7d0fff:S, 0x7d1000-0x7d1fff:S, 0x7d2000-0x7d2fff:S, 0x7d3000-0x7d3fff:S, 0x7d4000-0x7d4fff:S, 0x7d5000-0x7d5fff:S, 0x7d6000-0x7d6fff:S, 0x7d7000-0x7d7fff:S, 0x7d8000-0x7d8fff:S, 0x7d9000-0x7d9fff:S, 0x7da000-0x7dafff:S, 0x7db000-0x7dbfff:S, 0x7dc000-0x7dcfff:S, 0x7dd000-0x7ddfff:S, 0x7de000-0x7defff:S, 0x7df000-0x7dffff:S, 0x7e0000-0x7e0fff:S, 0x7e1000-0x7e1fff:S, 0x7e2000-0x7e2fff:S, 0x7e3000-0x7e3fff:S, 0x7e4000-0x7e4fff:S, 0x7e5000-0x7e5fff:S, 0x7e6000-0x7e6fff:S, 0x7e7000-0x7e7fff:S, 0x7e8000-0x7e8fff:S, 0x7e9000-0x7e9fff:S, 0x7ea000-0x7eafff:S, 0x7eb000-0x7ebfff:S, 0x7ec000-0x7ecfff:S, 0x7ed000-0x7edfff:S, 0x7ee000-0x7eefff:S, 0x7ef000-0x7effff:S, 0x7f0000-0x7f0fff:S, 0x7f1000-0x7f1fff:S, 0x7f2000-0x7f2fff:S, 0x7f3000-0x7f3fff:S, 0x7f4000-0x7f4fff:S, 0x7f5000-0x7f5fff:S, 0x7f6000-0x7f6fff:S, 0x7f7000-0x7f7fff:S, 0x7f8000-0x7f8fff:S, 0x7f9000-0x7f9fff:S, 0x7fa000-0x7fafff:S, 0x7fb000-0x7fbfff:S, 0x7fc000-0x7fcfff:S, 0x7fd000-0x7fdfff:S, 0x7fe000-0x7fefff:S, 0x7ff000-0x7fffff:S Erase/write done. Verifying flash... VERIFIED. Restoring MMIO space at 0xf772f8a0 Restoring MMIO space at 0xf772f89c Restoring MMIO space at 0xf772f898 Restoring MMIO space at 0xf772f896 Restoring MMIO space at 0xf772f894 Restoring PCI config space for 00:1f:0 reg 0xdc

3 3

Re: [flashrom] [PATCH] Make delay values unsigned.
by Stefan Tauner 02 May '14

02 May '14

On Mon, 21 Oct 2013 23:55:44 +0200 Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> wrote: > There is no reason for negative delays in our use cases: > - We don't need it (to work around any quirks). > - sleep() (POSIX) uses an unsigned argument. > - usleep() (POSIX) uses an unsigned argument. > - Sleep() (Windows) uses an unsigned argument. > > Signed-off-by: Stefan Tauner <stefan.tauner(a)student.tuwien.ac.at> > --- > flash.h | 2 +- > flashrom.c | 2 +- > programmer.h | 10 +++++----- > serprog.c | 2 +- > udelay.c | 10 +++++----- > 5 files changed, 13 insertions(+), 13 deletions(-) > > diff --git a/flash.h b/flash.h > index e320ced..bfb0a49 100644 > --- a/flash.h > +++ b/flash.h > @@ -56,7 +56,7 @@ typedef uint32_t chipsize_t; /* Able to store the number of bytes of any support > int register_shutdown(int (*function) (void *data), void *data); > void *programmer_map_flash_region(const char *descr, uintptr_t phys_addr, size_t len); > void programmer_unmap_flash_region(void *virt_addr, size_t len); > -void programmer_delay(int usecs); > +void programmer_delay(unsigned int usecs); > > #define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0])) > > diff --git a/flashrom.c b/flashrom.c > index 092572e..23728f6 100644 > --- a/flashrom.c > +++ b/flashrom.c > @@ -485,7 +485,7 @@ void chip_readn(const struct flashctx *flash, uint8_t *buf, chipaddr addr, > flash->pgm->par.chip_readn(flash, buf, addr, len); > } > > -void programmer_delay(int usecs) > +void programmer_delay(unsigned int usecs) > { > if (usecs > 0) > programmer_table[programmer].delay(usecs); > diff --git a/programmer.h b/programmer.h > index ef96c9e..b3df981 100644 > --- a/programmer.h > +++ b/programmer.h > @@ -120,7 +120,7 @@ struct programmer_entry { > void *(*map_flash_region) (const char *descr, uintptr_t phys_addr, size_t len); > void (*unmap_flash_region) (void *virt_addr, size_t len); > > - void (*delay) (int usecs); > + void (*delay) (unsigned int usecs); > }; > > extern const struct programmer_entry programmer_table[]; > @@ -248,10 +248,10 @@ extern const struct board_info laptops_known[]; > #endif > > /* udelay.c */ > -void myusec_delay(int usecs); > +void myusec_delay(unsigned int usecs); > void myusec_calibrate_delay(void); > -void internal_sleep(int usecs); > -void internal_delay(int usecs); > +void internal_sleep(unsigned int usecs); > +void internal_delay(unsigned int usecs); > > #if CONFIG_INTERNAL == 1 > /* board_enable.c */ > @@ -654,7 +654,7 @@ int register_programmer(struct registered_programmer *pgm); > /* serprog.c */ > #if CONFIG_SERPROG == 1 > int serprog_init(void); > -void serprog_delay(int usecs); > +void serprog_delay(unsigned int usecs); > #endif > > /* serial.c */ > diff --git a/serprog.c b/serprog.c > index 237db7d..8a952d4 100644 > --- a/serprog.c > +++ b/serprog.c > @@ -865,7 +865,7 @@ static void serprog_chip_readn(const struct flashctx *flash, uint8_t * buf, > sp_do_read_n(&(buf[addrm-addr]), addrm, lenm); // FIXME: return error > } > > -void serprog_delay(int usecs) > +void serprog_delay(unsigned int usecs) > { > unsigned char buf[4]; > msg_pspew("%s usecs=%d\n", __func__, usecs); > diff --git a/udelay.c b/udelay.c > index e3cf3e3..ee858b8 100644 > --- a/udelay.c > +++ b/udelay.c > @@ -30,7 +30,7 @@ > /* loops per microsecond */ > static unsigned long micro = 1; > > -__attribute__ ((noinline)) void myusec_delay(int usecs) > +__attribute__ ((noinline)) void myusec_delay(unsigned int usecs) > { > unsigned long i; > for (i = 0; i < usecs * micro; i++) { > @@ -63,7 +63,7 @@ static unsigned long measure_os_delay_resolution(void) > return timeusec; > } > > -static unsigned long measure_delay(int usecs) > +static unsigned long measure_delay(unsigned int usecs) > { > unsigned long timeusec; > struct timeval start, end; > @@ -170,7 +170,7 @@ recalibrate: > } > > /* Not very precise sleep. */ > -void internal_sleep(int usecs) > +void internal_sleep(unsigned int usecs) > { > #ifdef _WIN32 > Sleep((usecs + 999) / 1000); > @@ -181,7 +181,7 @@ void internal_sleep(int usecs) > } > > /* Precise delay. */ > -void internal_delay(int usecs) > +void internal_delay(unsigned int usecs) > { > /* If the delay is >1 s, use internal_sleep because timing does not need to be so precise. */ > if (usecs > 1000000) { > @@ -199,7 +199,7 @@ void myusec_calibrate_delay(void) > get_cpu_speed(); > } > > -void internal_delay(int usecs) > +void internal_delay(unsigned int usecs) > { > udelay(usecs); > } I have also modified all callees which just required new local types but no other changes. Acked-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> and committed in r1782. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[commit] r1782 - trunk
by repository service 02 May '14

02 May '14

Author: stefanct Date: Fri May 2 17:41:42 2014 New Revision: 1782 URL: http://flashrom.org/trac/flashrom/changeset/1782 Log: Make delay values unsigned. There is no reason for negative delays in our use cases: - We don't need it (to work around any quirks). - sleep() (POSIX) uses an unsigned argument. - usleep() (POSIX) uses an unsigned argument. - Sleep() (Windows) uses an unsigned argument. Change all callees as well (without any complications). Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Modified: trunk/flash.h trunk/flashrom.c trunk/jedec.c trunk/programmer.h trunk/serprog.c trunk/udelay.c Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Sun Apr 27 07:07:35 2014 (r1781) +++ trunk/flash.h Fri May 2 17:41:42 2014 (r1782) @@ -56,7 +56,7 @@ int register_shutdown(int (*function) (void *data), void *data); void *programmer_map_flash_region(const char *descr, uintptr_t phys_addr, size_t len); void programmer_unmap_flash_region(void *virt_addr, size_t len); -void programmer_delay(int usecs); +void programmer_delay(unsigned int usecs); #define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0])) Modified: trunk/flashrom.c ============================================================================== --- trunk/flashrom.c Sun Apr 27 07:07:35 2014 (r1781) +++ trunk/flashrom.c Fri May 2 17:41:42 2014 (r1782) @@ -485,7 +485,7 @@ flash->pgm->par.chip_readn(flash, buf, addr, len); } -void programmer_delay(int usecs) +void programmer_delay(unsigned int usecs) { if (usecs > 0) programmer_table[programmer].delay(usecs); Modified: trunk/jedec.c ============================================================================== --- trunk/jedec.c Sun Apr 27 07:07:35 2014 (r1781) +++ trunk/jedec.c Fri May 2 17:41:42 2014 (r1782) @@ -37,8 +37,7 @@ return (val ^ (val >> 1)) & 0x1; } -static void toggle_ready_jedec_common(const struct flashctx *flash, - chipaddr dst, int delay) +static void toggle_ready_jedec_common(const struct flashctx *flash, chipaddr dst, unsigned int delay) { unsigned int i = 0; uint8_t tmp1, tmp2; @@ -128,7 +127,7 @@ uint8_t id1, id2; uint32_t largeid1, largeid2; uint32_t flashcontent1, flashcontent2; - int probe_timing_enter, probe_timing_exit; + unsigned int probe_timing_enter, probe_timing_exit; if (chip->probe_timing > 0) probe_timing_enter = probe_timing_exit = chip->probe_timing; @@ -245,9 +244,9 @@ unsigned int pagesize, unsigned int mask) { chipaddr bios = flash->virtual_memory; - int delay_us = 0; + unsigned int delay_us = 0; if(flash->chip->probe_timing != TIMING_ZERO) - delay_us = 10; + delay_us = 10; /* Issue the Sector Erase command */ chip_writeb(flash, 0xAA, bios + (0x5555 & mask)); @@ -275,9 +274,9 @@ unsigned int blocksize, unsigned int mask) { chipaddr bios = flash->virtual_memory; - int delay_us = 0; + unsigned int delay_us = 0; if(flash->chip->probe_timing != TIMING_ZERO) - delay_us = 10; + delay_us = 10; /* Issue the Sector Erase command */ chip_writeb(flash, 0xAA, bios + (0x5555 & mask)); @@ -304,9 +303,9 @@ static int erase_chip_jedec_common(struct flashctx *flash, unsigned int mask) { chipaddr bios = flash->virtual_memory; - int delay_us = 0; + unsigned int delay_us = 0; if(flash->chip->probe_timing != TIMING_ZERO) - delay_us = 10; + delay_us = 10; /* Issue the JEDEC Chip Erase command */ chip_writeb(flash, 0xAA, bios + (0x5555 & mask)); Modified: trunk/programmer.h ============================================================================== --- trunk/programmer.h Sun Apr 27 07:07:35 2014 (r1781) +++ trunk/programmer.h Fri May 2 17:41:42 2014 (r1782) @@ -120,7 +120,7 @@ void *(*map_flash_region) (const char *descr, uintptr_t phys_addr, size_t len); void (*unmap_flash_region) (void *virt_addr, size_t len); - void (*delay) (int usecs); + void (*delay) (unsigned int usecs); }; extern const struct programmer_entry programmer_table[]; @@ -248,10 +248,10 @@ #endif /* udelay.c */ -void myusec_delay(int usecs); +void myusec_delay(unsigned int usecs); void myusec_calibrate_delay(void); -void internal_sleep(int usecs); -void internal_delay(int usecs); +void internal_sleep(unsigned int usecs); +void internal_delay(unsigned int usecs); #if CONFIG_INTERNAL == 1 /* board_enable.c */ @@ -655,7 +655,7 @@ /* serprog.c */ #if CONFIG_SERPROG == 1 int serprog_init(void); -void serprog_delay(int usecs); +void serprog_delay(unsigned int usecs); #endif /* serial.c */ Modified: trunk/serprog.c ============================================================================== --- trunk/serprog.c Sun Apr 27 07:07:35 2014 (r1781) +++ trunk/serprog.c Fri May 2 17:41:42 2014 (r1782) @@ -870,7 +870,7 @@ sp_do_read_n(&(buf[addrm-addr]), addrm, lenm); // FIXME: return error } -void serprog_delay(int usecs) +void serprog_delay(unsigned int usecs) { unsigned char buf[4]; msg_pspew("%s usecs=%d\n", __func__, usecs); Modified: trunk/udelay.c ============================================================================== --- trunk/udelay.c Sun Apr 27 07:07:35 2014 (r1781) +++ trunk/udelay.c Fri May 2 17:41:42 2014 (r1782) @@ -30,7 +30,7 @@ /* loops per microsecond */ static unsigned long micro = 1; -__attribute__ ((noinline)) void myusec_delay(int usecs) +__attribute__ ((noinline)) void myusec_delay(unsigned int usecs) { unsigned long i; for (i = 0; i < usecs * micro; i++) { @@ -63,7 +63,7 @@ return timeusec; } -static unsigned long measure_delay(int usecs) +static unsigned long measure_delay(unsigned int usecs) { unsigned long timeusec; struct timeval start, end; @@ -170,7 +170,7 @@ } /* Not very precise sleep. */ -void internal_sleep(int usecs) +void internal_sleep(unsigned int usecs) { #ifdef _WIN32 Sleep((usecs + 999) / 1000); @@ -181,7 +181,7 @@ } /* Precise delay. */ -void internal_delay(int usecs) +void internal_delay(unsigned int usecs) { /* If the delay is >1 s, use internal_sleep because timing does not need to be so precise. */ if (usecs > 1000000) { @@ -199,7 +199,7 @@ get_cpu_speed(); } -void internal_delay(int usecs) +void internal_delay(unsigned int usecs) { udelay(usecs); }

1 0

Re: [flashrom] HM87 test report
by Stefan Tauner 02 May '14

02 May '14

On Fri, 2 May 2014 00:44:41 +0400 Vasiliy Vylegzhanin <6vasia(a)gmail.com> wrote: > On Fri, May 2, 2014 at 12:06 AM, Stefan Tauner > <stefan.tauner(a)alumni.tuwien.ac.at> wrote: > > Also interesting would be what board that is? > > MSI GT60 notebook. Also, I had some HM77 based notebooks, which I > could test, if any left. There are two versions of the GT60, which one is it? http://www.msi.com/product/nb/GT60_2OC.html#specification http://www.msi.com/product/nb/GT60_0NC.html#?div=Specification No need to test/risk additional boards, but if you do use flashrom on them successfully we would like to know ;) -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

W836xx: Supermicro X8DTT-F-SG007: flashrom -V
by Terry Greenlee 02 May '14

02 May '14

Attached is the output from "flashrom -V" as the output requested. I backed up the running BIOS with AFUDOS and flashrom getting different sum values under fedora 18. $ sum *.ROM 19558 4096 SGIBIOS.ROM $ sum *.rom 16753 4096 MX25L3205A.rom I'm getting ready to flash over the SGI BIOS with the latest Supermicro and I'm worried about using flashrom instead of AFUDOS. Let me know if anyone is interested in helping my efforts. Thanks,

2 1

Re: [flashrom] Macronix MX25L2005 log
by Stefan Tauner 02 May '14

02 May '14

Hello Давыдов, thanks for your report! I have marked the flash chip as fully tested and will commit that later together with other small changes. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Success: Attro G5G100-P read/write
by Christoph Grenz 01 May '14

01 May '14

Hello, I tested flashrom on an Attro G5G100-P industrial board. Reading and writing the original BIOS were successful, both with the original chip and a spare PLCC chip. The logs are attached. Christoph

2 1

Re: [flashrom] Riva TNT 2, What is max chip size
by Stefan Tauner 01 May '14

01 May '14

On Tue, 22 Oct 2013 23:48:42 +0200 san <san(a)plusnet.pl> wrote: > Both are OTP, but why they are not supported (for read)? Because no one has added support for them yet. Patches welcome... -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] (Un)documented devices
by Stefan Tauner 01 May '14

01 May '14

On Mon, 21 Oct 2013 23:52:14 +0200 san <san(a)plusnet.pl> wrote: > First thing: > Winbond W29EE011 (128k, parallel) works well, but not auto (needs to be > forced by '-c') - yes, i know why. > I'm not sure if it was while programming this one or Pm..., but it dropped > message about 'retrying to flash', and it worked well after all. I don't see a good reason to not mark them as write-tested, so... I have changed that to PREW. Thanks for testing. > Another suggestion of mine: meybe add to PCI-devices list maximal chip size > support? That is on my todo list, but at the very bottom. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] MS-7030 Mainboard won't program BIOS chip model other than oryginal
by Stefan Tauner 01 May '14

01 May '14

On Fri, 18 Oct 2013 14:43:36 +0200 san <san(a)plusnet.pl> wrote: > i was thinking about adding column about packing/type of bios memory ie: > > MSI MS-7030 OK (autodetect) PLCC32/LPC > > or even some comments about this one. or link to report (this should be > enought readable. > in my case, i was looking for motherboard to program exactly one type chip. > it is not easy to look for mobo photos on google to find out which type the > chip is. > > and in this case - i found plcc32 but wrong type. Would be fine with me, but I really can not sustain updating this information. I am already struggling with keeping the data we currently already collect up to date. Also, it is not exactly trivial to gather the correct information to begin with... if you really want that kind of information in flashrom you need to do it yourself. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] HM87 test report
by Stefan Tauner 01 May '14

01 May '14

On Tue, 4 Mar 2014 16:54:49 +0400 Vasiliy Vylegzhanin <6vasia(a)gmail.com> wrote: > read and write look ok Indeed, and I have marked the HM87 as tested therefore. Also interesting would be what board that is? -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

Report MSI X58 Pro-E (MS-7522) - Flash ok
by Gianluigi Tiesi 01 May '14

01 May '14

remotely flashed, rebooted and worked -- Gianluigi Tiesi <sherpya(a)netfarm.it> EDP Project Leader Netfarm S.r.l. - http://www.netfarm.it/ Free Software: http://oss.netfarm.it/ Q: Because it reverses the logical flow of conversation. A: Why is putting a reply at the top of the message frowned upon?

2 1

nansi n25s16
by koval vovan 01 May '14

01 May '14

time flashrom -p ft2232_spi:type=2232H -V flashrom v0.9.7-r1751 on Linux 3.8.0-30-generic (i686) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.9, GCC 4.7.3, little endian Command line (3 args): flashrom -p ft2232_spi:type=2232H -V Calibrating delay loop... OS timer resolution is 1 usecs, 2793M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 998 us, 10000 myus = 10000 us, 4 myus = 4 us, OK. Initializing ft2232_spi programmer Using device type FTDI FT2232H channel A. FTDI chip type 2 is not high-speed. Set clock divisor MPSSE clock: 12.000000 MHz, divisor: 2, SPI clock: 6.000000 MHz No loopback of TDI/DO TDO/DI Set data bits The following protocols are supported: SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25F512, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512A, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25F1024(A), 128 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F2048, 256 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F4096, 512 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT45DB321E, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L1605D/MX25L1608D, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L3206E, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L6405(D), 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L6445E, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25L12805(D), 16384 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST M25PX80, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST M45PE10, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST M45PE20, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST M45PE40, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST M45PE80, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST M45PE16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Nantronics N25S10, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Nantronics N25S20, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Nantronics N25S40, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Nantronics N25S80, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Nantronics N25S16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Found Nantronics flash chip "N25S16" (2048 kB, SPI) on ft2232_spi. Chip status register is 0x00. Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set Chip status register: Bit 6 is not set Chip status register: Block Protect 3 (BP3) is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LV512(A), 64 kB: probe_spi_res3: id1 0x1414, id2 0x14 Probing for PMC Pm25LV010, 128 kB: probe_spi_res3: id1 0x1414, id2 0x14 Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Sanyo LE25FW203A, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Sanyo LE25FW403A, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Sanyo LE25FW418A, 512 kB: probe_spi_res2: id1 0x14, id2 0x14 Probing for Sanyo LE25FW806, 1024 kB: probe_spi_res2: id1 0x14, id2 0x14 Probing for Sanyo LE25FW808, 1024 kB: probe_spi_res2: id1 0x14, id2 0x14 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Spansion S25FL204K, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Spansion S25FL208K, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Spansion S25FL116K/S25FL216K, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Spansion S25FL128S......0, 16384 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x14, id2 0x14 Probing for SST SST25LF080(A), 1024 kB: probe_spi_res2: id1 0x14, id2 0x14 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xd5, id2 0x14 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xd5, id2 0x14 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xd5, id2 0x14 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25Q80.V, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25Q16.V, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25Q32.V, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25Q64.V, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25Q128.V, 16384 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25Q20.W, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25Q40.W, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25Q80.W, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25Q16.W, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25Q32.W, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25Q64.W, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Unknown SFDP-capable chip, 0 kB: No SFDP signature found. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xd5, id2 0x3015 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xd5, id2 0x14 Found Nantronics flash chip "N25S16" (2048 kB, SPI). === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -VE, -Vw), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! No operations were specified. real 0m1.922s user 0m0.800s sys 0m0.008s

2 1

Successful flash of GIGABYTE GA-970A-D3P (rev. 1.0)
by Jean-Francois Pirus 01 May '14

01 May '14

Hi, Just to let you know I successfully flashed a GA-970A-D3P Motherbaord from Bios version F3 to F5 using flashrom v0.9.6.1-r1563 on Linux 3.11.0-17-generic (x86_64) In the attached file GA-970A-D3P.tgzis the output of: flashrom -p internal -V lspci -nnvvxxx superiotool -deV Thanks. -- Jean-Francois Pirus | Technical Manager francois(a)clearfield.com | Mob +64 21 640 779 | DDI +64 9 282 3401 Clearfield Software Ltd | Ph +64 9 358 2081 | www.clearfield.com

2 1

(no subject)
by césar augusto jakoby 01 May '14

01 May '14

[root@m8 m8]# flashrom -p internal flashrom v0.9.7-r1711 on Linux 3.12.13-1-ck (x86_64) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "AMD SB7x0/SB8x0/SB9x0". Enabling flash write... OK. Found Winbond flash chip "W25Q80.V" (1024 kB, SPI) at physical address 0xfff00000. No operations were specified. [root@m8 m8]# flashrom -p internal -r backup.bin flashrom v0.9.7-r1711 on Linux 3.12.13-1-ck (x86_64) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "AMD SB7x0/SB8x0/SB9x0". Enabling flash write... OK. Found Winbond flash chip "W25Q80.V" (1024 kB, SPI) at physical address 0xfff00000. Reading flash... done. [root@m8 m8]# flashrom -p internal -w APM80500.ROM flashrom v0.9.7-r1711 on Linux 3.12.13-1-ck (x86_64) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "AMD SB7x0/SB8x0/SB9x0". Enabling flash write... OK. Found Winbond flash chip "W25Q80.V" (1024 kB, SPI) at physical address 0xfff00000. Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... VERIFIED. [root@m8 m8]# lspci 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RS690 Host Bridge 00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RS690 PCI to PCI Bridge (PCI Express Graphics Port 0) 00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RS690 PCI to PCI Bridge (PCI Express Port 1) 00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller 00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.1 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller 00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 3c) 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller 00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge 00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 8400 GS Rev. 3] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03) [root@m8 m8]#

2 1

Donations
by Stefan Tauner 01 May '14

01 May '14

I have set up a donations page in the wiki that refers to organizations that should receive donations instead of "us" (e.g. FSF). Please review the page and list of organization if you care about that. http://flashrom.org/Donations The rationale is... we regularly get donation offers but don't want to take them as a group (because there is non - in a legal context), neither do individuals... yet, but channelling such money into a direction that all contributors agree on is/would be a good thing IMHO. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

x7spe-hf-d525 support
by Micah Anderson 01 May '14

01 May '14

Hello, You have listed as a supported mainboard the x7spa-hf, it turns out there is a very similar board that also works, the x7spe-hf-d525. I just wanted to write to you to let you know so you could update your supported mainboard page. micah

2 1

Re: [flashrom] Add PICkit2 as an SPI programmer
by Stefan Tauner 01 May '14

01 May '14

On Sun, 24 Mar 2013 11:10:19 -0400 Justin Chevrier <jchevrier(a)gmail.com> wrote: > From the 'You can never have enough programmers' file, comes support > for another programmer type. Supporting the internal one becomes more painful every day, so expanding the support for external programmers is very welcomed, thanks! > Specifically it's the PICkit2. This patch was inspired by the code in > AVRDude (open source Atmel AVR > programmer) to support the PICkit2 written by Doug Brown [1]. The > Dediprog code in Flashrom was used > as the template for this code with some reference to the ft2232 code > as well. I left Carl-Daniel in > the copyright assignment as I thought it made the most sense as I > basically copied and pasted then > modified the code as needed. Hopefully that was the right thing to do. Sure, the copyright does not vanish when you copy some code to a new file, so all previous copyright notices should be copied over too (if one thinks they are useful at all... :) > A few notes: > > 1) The code makes no provision for externally powered targets (where > VDD from the PICkit can be connected to > the device and an external power source and it will detect external > power and not apply its own). > I'm assuming that code needs to be written for this to work and that > the PICkit itself doesn't make it happen > automagically. Not sure on that one I have *no* idea about that programmer or the protocol... but maybe that's what the equivalent of voltage_selector = 0 is for? > > 2) I've tested with PICkit2 firmware version 2.32. I suspect that > there are earlier versions of the > firmware that are not capable of talking SPI, but I'm not sure. Should > we include a warning if we detect > that a user is running on older firmware and ask users to submit if > their firmware version works > for them? Maybe... other programmers use their devices struct for such things. I don't think dediprog is a good example in this regard. > 3) I've only tested with the one easily accessible SPI chip I have on > hand (GigaDevice GD25Q80) > > Connections are as follows: > > PICkit2 Pin 1 - VPP/MCLR -> CS > PICkit2 Pin 2 - VDD -> Vcc > PICkit2 Pin 3 - GND -> Vss > PICkit2 Pin 4 - PGD -> SO > PICkit2 Pin 5 - PDC -> SCLK > PICkit2 Pin 6 - AUX -> SI Creating a wiki page would be welcomed. If you want an account to do that, just ask. > Feedback welcomed! Hopefully this is useful to someone. > > Thanks for the great tools as always guys. Thanks for your patch! The following is not a full review, but I mention a few things I spotted while skimming through. Feel free to ignore them (for now :) if you don't agree. > Index: Makefile > =================================================================== > --- Makefile (revision 1657) > +++ Makefile (working copy) > @@ -117,7 +117,7 @@ > else > override CONFIG_PONY_SPI = no > endif > -# Dediprog and FT2232 are not supported under DOS (missing USB support). > +# Dediprog, FT2232 and PICkit2 are not supported under DOS (missing USB support). > ifeq ($(CONFIG_DEDIPROG), yes) > UNSUPPORTED_FEATURES += CONFIG_DEDIPROG=yes > else > @@ -128,7 +128,12 @@ > else > override CONFIG_FT2232_SPI = no > endif > +ifeq ($(CONFIG_PICKIT2_SPI), yes) > +UNSUPPORTED_FEATURES += CONFIG_PICKIT2_SPI=yes > +else > +override CONFIG_PICKIT2_SPI = no > endif > +endif > > # FIXME: Should we check for Cygwin/MSVC as well? > ifeq ($(TARGET_OS), MinGW) > @@ -229,7 +234,7 @@ > else > override CONFIG_SERPROG = no > endif > -# Dediprog and FT2232 are not supported with libpayload (missing libusb support) > +# Dediprog, FT2232 and PICkit2 are not supported with libpayload (missing libusb support) > ifeq ($(CONFIG_DEDIPROG), yes) > UNSUPPORTED_FEATURES += CONFIG_DEDIPROG=yes > else > @@ -240,7 +245,12 @@ > else > override CONFIG_FT2232_SPI = no > endif > +ifeq ($(CONFIG_PICKIT2_SPI), yes) > +UNSUPPORTED_FEATURES += CONFIG_PICKIT2_SPI=yes > +else > +override CONFIG_PICKIT2_SPI = no > endif > +endif > > ifneq ($(TARGET_OS), Linux) > ifeq ($(CONFIG_LINUX_SPI), yes) > @@ -382,6 +392,9 @@ > # Enable Linux spidev interface by default. We disable it on non-Linux targets. > CONFIG_LINUX_SPI ?= yes > > +# Always enable PICkit2 SPI dongles for now. > +CONFIG_PICKIT2_SPI ?= yes > + > # Disable wiki printing by default. It is only useful if you have wiki access. > CONFIG_PRINT_WIKI ?= no > > @@ -549,6 +562,12 @@ > PROGRAMMER_OBJS += linux_spi.o > endif > > +ifeq ($(CONFIG_PICKIT2_SPI), yes) > +FEATURE_CFLAGS += -D'CONFIG_PICKIT2_SPI=1' > +PROGRAMMER_OBJS += pickit2_spi.o > +NEED_USB := yes > +endif > + > ifeq ($(NEED_SERIAL), yes) > LIB_OBJS += serial.o > endif > Index: flashrom.8 > =================================================================== > --- flashrom.8 (revision 1657) > +++ flashrom.8 (working copy) > @@ -220,6 +220,8 @@ > .sp > .BR "* linux_spi" " (for SPI flash ROMs accessible via /dev/spidevX.Y on Linux)" > .sp > +.BR "* pickit2_spi" " (for SPI flash ROMs accessible via Microchip PICkit2 on Linux)" Linux only? I guess that's a copy & paste error and it will work whereever flashrom and libusb work. > +.sp > Some programmers have optional or mandatory parameters which are described > in detail in the > .B PROGRAMMER SPECIFIC INFO TODO: explanation of programmer parameters in an detailed section. > Index: flashrom.c > =================================================================== > --- flashrom.c (revision 1657) > +++ flashrom.c (working copy) > @@ -308,6 +308,19 @@ > }, > #endif > > +#if CONFIG_PICKIT2_SPI == 1 > + { > + .name = "pickit2_spi", > + .type = OTHER, > + /* FIXME */ > + .devs.note = "Microchip PICkit2\n", > + .init = pickit2_spi_init, > + .map_flash_region = fallback_map, > + .unmap_flash_region = fallback_unmap, > + .delay = internal_delay, > + }, > +#endif > + > {0}, /* This entry corresponds to PROGRAMMER_INVALID. */ > }; > > Index: pickit2_spi.c > =================================================================== > --- pickit2_spi.c (revision 0) > +++ pickit2_spi.c (working copy) > @@ -0,0 +1,519 @@ > +/* > + * This file is part of the flashrom project. > + * > + * Copyright (C) 2010 Carl-Daniel Hailfinger > + * Copyright (C) 2013 Justin Chevrier > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; version 2 of the License. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > + */ > + Links to or citations of relevant documentation should go here (or the to be written manpage section, if useful to users too), at least a reference to avrdude should be given IMHO, but feel free to be as verbose as the commit log. > +#include <stdio.h> > +#include <string.h> > +#include <limits.h> > +#include <errno.h> > +#include <usb.h> > +#include "flash.h" > +#include "chipdrivers.h" > +#include "programmer.h" > +#include "spi.h" > + > +static usb_dev_handle *pickit2_handle; > + > +#define DEFAULT_TIMEOUT 10000 which unit? when is it used? etc. > + > +#define CMD_LENGTH 64 > +#define ENDPOINT_OUT 0x01 > +#define ENDPOINT_IN 0x81 > + > +#define PICKIT2_VID 0x04D8 > +#define PICKIT2_PID 0x0033 > + > +#define CMD_GET_VERSION 0x76 > +#define CMD_SET_VDD 0xA0 > +#define CMD_SET_VPP 0xA1 > +#define CMD_READ_VDD_VPP 0xA3 > +#define CMD_EXEC_SCRIPT 0xA6 > +#define CMD_CLR_DLOAD_BUFF 0xA7 > +#define CMD_DOWNLOAD_DATA 0xA8 > +#define CMD_CLR_ULOAD_BUFF 0xA9 > +#define CMD_UPLOAD_DATA 0xAA > +#define CMD_END_OF_BUFFER 0xAD > + > +#define SCR_SPI_READ_BUF 0xC5 > +#define SCR_SPI_WRITE_BUF 0xC6 > +#define SCR_SET_AUX 0xCF > +#define SCR_LOOP 0xE9 > +#define SCR_SET_ICSP_CLK_PERIOD 0xEA > +#define SCR_SET_PINS 0xF3 > +#define SCR_BUSY_LED_OFF 0xF4 > +#define SCR_BUSY_LED_ON 0xF5 > +#define SCR_MCLR_GND_OFF 0xF6 > +#define SCR_MCLR_GND_ON 0xF7 > +#define SCR_VPP_PWM_OFF 0xF8 > +#define SCR_VPP_PWM_ON 0xF9 > +#define SCR_VPP_OFF 0xFA > +#define SCR_VPP_ON 0xFB > +#define SCR_VDD_OFF 0xFE > +#define SCR_VDD_ON 0xFF > + > +/* Might be useful for other USB devices as well. static for now. */ We need to sort stuff like this out, but that's not your problem. > +/* device parameter allows user to specify one device of multiple installed */ > +static struct usb_device *get_device_by_vid_pid(uint16_t vid, uint16_t pid, unsigned int device) > +{ > + struct usb_bus *bus; > + struct usb_device *dev; > + > + for (bus = usb_get_busses(); bus; bus = bus->next) > + for (dev = bus->devices; dev; dev = dev->next) > + if ((dev->descriptor.idVendor == vid) && > + (dev->descriptor.idProduct == pid)) { > + if (device == 0) > + return dev; > + device--; > + } > + > + return NULL; > +} > + > +static int pickit2_get_firmware_version(void) > +{ > + int ret; > + unsigned char command[CMD_LENGTH] = {CMD_GET_VERSION, CMD_END_OF_BUFFER}; > + > + ret = usb_interrupt_write(pickit2_handle, ENDPOINT_OUT, (char *)command, CMD_LENGTH, DEFAULT_TIMEOUT); > + ret = usb_interrupt_read(pickit2_handle, ENDPOINT_IN, (char *)command, CMD_LENGTH, DEFAULT_TIMEOUT); > + > + msg_pdbg("PICkit2 Firmware Version: %d.%d\n", (int)command[0], (int)command[1]); > + if (ret != CMD_LENGTH) { > + msg_perr("Command Get Firmware Version failed (%s)!\n", > + usb_strerror()); > + return 1; > + } > + > + return 0; > +} > + > +static int pickit2_set_spi_voltage(int millivolt) > +{ > + int ret; > + uint16_t voltage_selector; > […] > + voltage_selector = 1.8; that would be in the best case some "creative" usage of floating point constants. ;) > […] > + > + unsigned char command[CMD_LENGTH] = { I personally favor uint8_t instead of unsigned chars... > + CMD_SET_VDD, > + (uint8_t)(voltage_selector * 2048+672), ... especially if you cast to them anyway :) > + (uint8_t)((voltage_selector * 2048+672)/256), We normally add spaces around all binary ops. > + (uint8_t)(voltage_selector * 36), > + CMD_SET_VPP, > + 0x40, > + (uint8_t)(voltage_selector * 18.61), I am not sure I want to understand that protocol better, if this is correct. :) > + (uint8_t)(voltage_selector * 13), > + CMD_END_OF_BUFFER > + }; > + > + ret = usb_interrupt_write(pickit2_handle, ENDPOINT_OUT, (char *)command, CMD_LENGTH, DEFAULT_TIMEOUT); > + > + if (ret != CMD_LENGTH) { > + msg_perr("Command Set Voltage failed (%s)!\n", > + usb_strerror()); > + return 1; > + } > + > + return 0; > +} > + > + > +struct pickit2_spispeeds { > + const char *const name; > + const int speed; > +}; > + > +static const struct pickit2_spispeeds spispeeds[] = { > + { "1M", 0x1 }, > + { "500k", 0x2 }, > + { "333k", 0x3 }, > + { "250k", 0x4 }, > + { NULL, 0x0 }, > +}; > + > +static int pickit2_set_spi_speed(unsigned int spispeed_idx) > +{ > + int ret; > + > + msg_pdbg("SPI speed is %sHz\n", spispeeds[spispeed_idx].name); > + > + unsigned char command[CMD_LENGTH] = { > + CMD_EXEC_SCRIPT, > + 2, > + SCR_SET_ICSP_CLK_PERIOD, > + spispeed_idx, > + CMD_END_OF_BUFFER > + }; > + > + ret = usb_interrupt_write(pickit2_handle, ENDPOINT_OUT, (char *)command, CMD_LENGTH, DEFAULT_TIMEOUT); > + > + if (ret != CMD_LENGTH) { > + msg_perr("Command Set SPI Speed failed (%s)!\n", > + usb_strerror()); > + return 1; > + } > + > + return 0; > +} > + > +static int pickit2_spi_send_command(struct flashctx *flash, > + unsigned int writecnt, > + unsigned int readcnt, > + const unsigned char *writearr, > + unsigned char *readarr) > +{ > + int ret,i; > + > + unsigned char buf[CMD_LENGTH] = {CMD_DOWNLOAD_DATA, writecnt}; > + > + /* Maximum number of bytes per transaction (including command overhead) is 64. Lets play it safe > + * and always assume the worst case scenario of 20 bytes command overhead. > + */ > + msg_pspew("%s, writecnt=%i, readcnt=%i\n", __func__, writecnt, readcnt); > + if (writecnt + readcnt + 20 > CMD_LENGTH) { > + msg_perr("\nTotal packetsize (%i) is greater than 64 supported, aborting.\n", writecnt + readcnt + 20); > + return 1; > + } > + > + for (i = 2; i < writecnt + 2; i++) > + { The curly brace should be at the end of the "for line" according to our style. > + buf[i] = writearr[i - 2]; > + } > + > + buf[i++] = CMD_CLR_ULOAD_BUFF; > + buf[i++] = CMD_EXEC_SCRIPT; > + > + /* Determine script length based on number of bytes to be read or written */ > + if (writecnt == 1 && readcnt == 1) > + buf[i++] = 7; > + else if (writecnt == 1 || readcnt == 1) > + buf[i++] = 10; > + else > + buf[i++] = 13; > + > + /* Assert CS# */ > + buf[i++] = SCR_VPP_OFF; > + buf[i++] = SCR_MCLR_GND_ON; > + > + buf[i++] = SCR_SPI_WRITE_BUF; > + > + if (writecnt > 1) { > + buf[i++] = SCR_LOOP; > + buf[i++] = 1; /* Loop back one instruction */ > + buf[i++] = writecnt - 1; /* Number of times to loop */ > + } > + > + if (readcnt) > + buf[i++] = SCR_SPI_READ_BUF; > + > + if (readcnt > 1) { > + buf[i++] = SCR_LOOP; > + buf[i++] = 1; /* Loop back one instruction */ > + buf[i++] = readcnt - 1; /* Number of times to loop */ > + } > + > + /* De-assert CS# */ > + buf[i++] = SCR_MCLR_GND_OFF; > + buf[i++] = SCR_VPP_PWM_ON; > + buf[i++] = SCR_VPP_ON; > + > + buf[i++] = CMD_UPLOAD_DATA; > + buf[i++] = CMD_END_OF_BUFFER; > + > + ret = usb_interrupt_write(pickit2_handle, ENDPOINT_OUT, (char *)buf, CMD_LENGTH, DEFAULT_TIMEOUT); > + > + if (ret != CMD_LENGTH) { > + msg_perr("Send SPI failed, expected %i, got %i %s!\n", > + writecnt, ret, usb_strerror()); > + return 1; > + } > + > + if (readcnt) { > + memset(readarr, 0, readcnt); > + memset(buf, 0, sizeof(buf)); Is this really necessary? > + > + ret = usb_interrupt_read(pickit2_handle, ENDPOINT_IN, (char *)buf, CMD_LENGTH, DEFAULT_TIMEOUT); > + > + if (ret != CMD_LENGTH) { > + msg_perr("Receive SPI failed, expected %i, got %i %s!\n", > + readcnt, ret, usb_strerror()); > + return 1; > + } > + > + /* First byte indicates number of bytes transferred from upload buffer */ > + if (buf[0] != readcnt) { > + msg_perr("Unexpected number of bytes transferred, expected %i, got %i!\n", > + readcnt, ret); > + return 1; > + } > + > + /* Actual data starts at byte number two */ > + memcpy(readarr, &buf[1], readcnt); > + } > + > + return 0; > +} > + This is a candidate for a ultity "class" too, please add the "might be useful" comment here too: /* Might be useful for other USB devices as well. static for now. */ And maybe add a reference to dediprog (and likewise for other copied functions) so that we know immediately that they have been copied. > +static int parse_voltage(char *voltage) > +{ > + char *tmp = NULL; > + int i; > + int millivolt = 0, fraction = 0; > + > + if (!voltage || !strlen(voltage)) { > + msg_perr("Empty voltage= specified.\n"); > + return -1; > + } > + millivolt = (int)strtol(voltage, &tmp, 0); > + voltage = tmp; > + /* Handle "," and "." as decimal point. Everything after it is assumed > + * to be in decimal notation. > + */ > + if ((*voltage == '.') || (*voltage == ',')) { > + voltage++; > + for (i = 0; i < 3; i++) { > + fraction *= 10; > + /* Don't advance if the current character is invalid, > + * but continue multiplying. > + */ > + if ((*voltage < '0') || (*voltage > '9')) > + continue; > + fraction += *voltage - '0'; > + voltage++; > + } > + /* Throw away remaining digits. */ > + voltage += strspn(voltage, "0123456789"); > + } > + /* The remaining string must be empty or "mV" or "V". */ > + tolower_string(voltage); > + > + /* No unit or "V". */ > + if ((*voltage == '\0') || !strncmp(voltage, "v", 1)) { > + millivolt *= 1000; > + millivolt += fraction; > + } else if (!strncmp(voltage, "mv", 2) || > + !strncmp(voltage, "milliv", 6)) { > + /* No adjustment. fraction is discarded. */ > + } else { > + /* Garbage at the end of the string. */ > + msg_perr("Garbage voltage= specified.\n"); > + return -1; > + } > + return millivolt; > +} > + I think this function can be inlined without disadvantages. The comment is clear enough. OTOH it might be worth it if you can generify a pickit2_teardown or similar (the code in the shutdown function). > +static int pickit2_setup(void) > +{ > + int ret; > + /* Configure pins for correct directions and logic levels, > + * turn Vdd on, turn busy LED on and clear buffers > + */ > + unsigned char buf[CMD_LENGTH] = { > + CMD_EXEC_SCRIPT, > + 10, /* Script length */ > + SCR_SET_PINS, > + /* Bit-0=0(PDC Out), Bit-1=1(PGD In), Bit-2=0(PDC LL), Bit-3=0(PGD LL) */ > + 2, > + SCR_SET_AUX, > + /* Bit-0=0(Aux Out), Bit-1=0(Aux LL) */ > + 0, > + SCR_VDD_ON, > + SCR_MCLR_GND_OFF, /* Let CS# float */ > + SCR_VPP_PWM_ON, > + SCR_VPP_ON, /* Pull CS# high */ > + SCR_BUSY_LED_ON, > + CMD_CLR_DLOAD_BUFF, > + CMD_CLR_ULOAD_BUFF, > + CMD_END_OF_BUFFER > + }; > + > + ret = usb_interrupt_write(pickit2_handle, ENDPOINT_OUT, (char *)buf, CMD_LENGTH, DEFAULT_TIMEOUT); > + > + if (ret != CMD_LENGTH) { > + msg_perr("Command Setup failed (%s)!\n", > + usb_strerror()); > + return 1; > + } > + > + return 0; > +} > + > +[…] > + > +static int pickit2_shutdown(void *data) > +{ > + int ret; > + msg_pspew("%s\n", __func__); > + > + /* Set all pins to float and turn voltages off */ > + unsigned char command[CMD_LENGTH] = { > + CMD_EXEC_SCRIPT, > + 8, > + SCR_SET_PINS, > + /* Bit-0=1(PDC In), Bit-1=1(PGD In), Bit-2=0(PDC LL), Bit-3=0(PGD LL) */ > + 3, > + SCR_SET_AUX, > + /* Bit-0=1(Aux In), Bit-1=0(Aux LL) */ > + 1, > + SCR_MCLR_GND_OFF, > + SCR_VPP_OFF, > + SCR_VDD_OFF, > + SCR_BUSY_LED_OFF, > + CMD_END_OF_BUFFER > + }; > + > + ret = usb_interrupt_write(pickit2_handle, ENDPOINT_OUT, (char *)command, CMD_LENGTH, DEFAULT_TIMEOUT); > + > + if (ret != CMD_LENGTH) { > + msg_perr("Command Shutdown failed (%s)!\n", > + usb_strerror()); > + return 1; > + } > + > + if (usb_release_interface(pickit2_handle, 0)) { > + msg_perr("Could not release USB interface!\n"); > + return 1; > + } > + if (usb_close(pickit2_handle)) { > + msg_perr("Could not close USB device!\n"); > + return 1; > + } > + return 0; > […] -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

3 2

Supermicro X10SLM-F support
by Micah Anderson 01 May '14

01 May '14

Hello, I was trying to read out the flashrom from a Supermicro X10SLM-F and found it wasn't supported. So I compiled the latest svn HEAD and tried it with the -Vr option so I could send it to you. Unfortunately, I can only test the read option on this server, as it is a production machine. Please let me know if there is any additional information I can provide. Thank you! micah flashrom -Vr bios --programmer internal flashrom v0.9.5.2-r1546 on Linux 3.10-1-amd64 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.7, GCC 4.6.2, little endian Command line (4 args): flashrom -Vr bios --programmer internal Calibrating delay loop... OS timer resolution is 1 usecs, 3560M loops per second, 10 myus = 10 us, 100 myus = 102 us, 1000 myus = 1008 us, 10000 myus = 9703 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Supermicro" DMI string system-product-name: "X10SLM-F" DMI string system-version: "0123456789" DMI string baseboard-manufacturer: "Supermicro" DMI string baseboard-product-name: "X10SLM-F" DMI string baseboard-version: "0123456789" DMI string chassis-type: "Main Server Chassis" Found chipset "Intel Lynx Point" with PCI ID 8086:8c54. This chipset is marked as untested. If you are using an up-to-date version of flashrom *and* were (not) able to successfully update your firmware with it, then please email a report to flashrom(a)flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... enable_flash_ich_dc_spi: unknown ICH generation. Please report! 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode enabled 0xff600000/0xff200000 FWH decode enabled 0xff500000/0xff100000 FWH decode enabled 0xff400000/0xff000000 FWH decode enabled Maximum FWH chip size: 0x100000 bytes BIOS Lock Enable: enabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x2a WARNING: BIOS region SMM protection is enabled! WARNING: Setting 0xdc from 0x2a to 0x2b on Lynx Point failed. New value is 0x2a. Root Complex Register Block address = 0xfed1c000 GCS = 0xc61: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (unknown) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0xf008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, FLOCKDN=1 WARNING: SPI Configuration Lockdown activated. Reading OPCODES... done 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00020000 (FADDR) 0x50: 0x00005a5b (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0x5a, BRRA 0x5b 0x54: 0x000f0000 FREG0: WARNING: Flash Descriptor region (0x00000000-0x0000ffff) is read-only. 0x58: 0x0fff0500 FREG1: BIOS region (0x00500000-0x00ffffff) is read-write. 0x5C: 0x04ff0020 FREG2: WARNING: Management Engine region (0x00020000-0x004fffff) is locked. 0x60: 0x001f0010 FREG3: Gigabit Ethernet region (0x00010000-0x0001ffff) is read-write. Please send a verbose log to flashrom(a)flashrom.org if this board is not listed on http://flashrom.org/Supported_hardware#Supported_mainboards yet. Writes have been disabled. You can enforce write support with the ich_spi_force programmer option, but it will most likely harm your hardware! If you force flashrom you will get no support if something breaks. 0x90: 0x84 (SSFS) SSFS: SCIP=0, FDONE=1, FCERR=0, AEL=0 0x91: 0xf90000 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=0, SME=0, SCF=1 0x94: 0x0006 (PREOP) 0x96: 0x043b (OPTYPE) 0x98: 0x05200302 (OPMENU) 0x9C: 0x0000019f (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xC4: 0x80802025 (LVSCC) LVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=1 0xC8: 0x00002025 (UVSCC) UVSCC: BES=0x1, WG=1, WSR=0, WEWS=0, EO=0x20, VCL=0 0xD0: 0x50444653 (FPB) SPI Read Configuration: prefetching enabled, caching enabled, PROBLEMS, continuing anyway The following protocols are supported: FWH, SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for GigaDevice GD25Q20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for GigaDevice GD25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for GigaDevice GD25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for GigaDevice GD25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for GigaDevice GD25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for GigaDevice GD25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for GigaDevice GD25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Numonyx N25Q064, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for SST SST25LF040A, 512 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25LF080A, 1024 kB: Invalid OPCODE 0xab, will not execute. Probing for SST SST25VF010, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Chip status register is 00 Found Winbond flash chip "W25Q128" (16384 kB, SPI) at physical address 0xff000000. Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Unknown SFDP-capable chip, 0 kB: Invalid OPCODE 0x5a, will not execute. Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x4018 Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute. Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xf9, id2 0x3f, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x0f, id2 0xb6, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 1024 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0x0f, id2 0xb6, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Found Winbond flash chip "W25Q128" (16384 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). === This flash part has status UNTESTED for operations: READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -VE, -Vw), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Reading flash... Transaction error! SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0 SSFC: SCGO=0, ACS=0, SPOP=0, COP=1, DBC=63, SME=0, SCF=1 Running OPCODE 0x03 failed at address 0x020000 (payload length was 64). Read operation failed! FAILED. Restoring MMIO space at 0x7f77f10a08a0 Restoring PCI config space for 00:1f:0 reg 0xdc

2 1

Re: [flashrom] SuperMicro H8QME2 motherboards work great with Flashrom
by Stefan Tauner 01 May '14

01 May '14

On Fri, 21 Mar 2014 05:36:51 -0400 Greg Tippitt <gtippitt(a)gmail.com> wrote: > On the hardware section of the wiki the SuperMicro H8QME2 was not > mentioned, but several others from SM were supported. > > I needed to upgrade the BIOS on my motherboard before I could upgrade from > dual core to hex core Opteron CPUs. It worked dead simple. Hello Greg, thanks for your report! I have added your board to our list of supported hardware and will commit that later together with other small changes. I presumed that it is a H8QME-2 (http://www.supermicro.com/Aplus/motherboard/Opteron8000/MCP55/H8QME-2.cfm) and not a H8QME-2+ (http://www.supermicro.com/Aplus/motherboard/Opteron8000/MCP55/H8QME-2_.cfm). If possible please always send a (verbose) log with such reports so that we can verify it and also look for oddities that might be interesting for our future work. > I tried to do the -z option to send in, but it said that option wasn't > compiled for. The -z option is similar to -L. The latter produces human-readable output from the information stored in flashrom, while -z produces input for the wiki from the same information. We use it to generate the wiki input internally. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

BIOS flash test OK: Supermicro X8SIL
by Peter Samuelson 01 May '14

01 May '14

Successful BIOS flash on Supermicro X8SIL. -r and -w logs attached. Thanks for the great tool! Peter

2 2

Bus Pirate v4
by jan.hagedorn.1979＠t-online.de 01 May '14

01 May '14

Hi everybody, can it be that the new buspirate version 4 is not supported by flashrom? I get the error "programmer initialization failed". I just used the command "flashrom -p buspirate_spi" to test it but it fails. I'm using MS Windows dos box. Best regards Jan Hagedorn

4 9

Re: [flashrom] NVIDIA MCP73
by Stefan Tauner 01 May '14

01 May '14

On Sat, 22 Mar 2014 08:11:30 +0100 Koen Rousseau <koen(a)teutenhof.be> wrote: > Reading, writing an verifying the BIOS on my old Acer Aspire M5640 PC's > motherboard worked like a charm. Many thanks! Hello Koen, thanks for your report! I have added your board to our list of supported hardware and will commit that later together with other small changes. The board is actually manufactured by MSI, model MS-7399 version 1.1 according to my google foo. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

FAILED pl8820
by Владимир Пчелинцев 01 May '14

01 May '14

Hi i try to update BIOS on my PL8820 and see this error Extracting image Running install.sh BIOS upgrade from B272 to B282. *** IMPORTANT *** The upgrade will try and power cycle the system the next time a reboot is scheduled. It's highly recommended to reboot the system after the upgrade is done. Type 'yes' to proceed with BIOS upgrade, or 'no' to abort: yes flashrom v0.9.6.1-r1627 on Linux 3.4.18-pl-xeon-plos_64 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "Intel ICH10R". Enabling flash write... OK. Found SST flash chip "SST25VF016B" (2048 kB, SPI) at physical address 0xffe00000 . Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... FAILED at 0x00040030! Expected=0xc3, Found=0xcb, failed byte count from 0x00000000-0x001fffff: 0x1a3 Your flash chip is in an unknown state. Get help on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org with the subject "FAILED: <your board name>"! ------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF! install_firmware: Installation aborted Firmware upgrade failed How to fix it. And more sadly we are power cycle this machine, how to make his alive again. Thanks -- Thank you Vladimir Pchelintsev Jet Infosystems Moscow, Russia +7 495 411 7601 ext. 1957 mobile: +7 9169645467

2 1

Re: [flashrom] flashrom help
by Stefan Tauner 30 Apr '14

30 Apr '14

Hi, thanks for the report! I have marked the components as tested and will commit that later together with other small changes. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[PATCH] Initial support for Marvell 88SE94xx v1
by Amit Uttamchandani 30 Apr '14

30 Apr '14

Signed-off-by: Amit Uttamchandani <amit.uttam(a)gmail.com> --- programmer.h | 1 + satamv.c | 151 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 152 insertions(+) diff --git a/programmer.h b/programmer.h index d4d1f90..0259022 100644 --- a/programmer.h +++ b/programmer.h @@ -527,6 +527,7 @@ enum spi_controller { #if CONFIG_USBBLASTER_SPI == 1 SPI_CONTROLLER_USBBLASTER, #endif + SPI_CONTROLLER_SATAMV, }; #define MAX_DATA_UNSPECIFIED 0 diff --git a/satamv.c b/satamv.c index 3065f0c..16787b8 100644 --- a/satamv.c +++ b/satamv.c @@ -22,9 +22,15 @@ #if defined(__i386__) || defined(__x86_64__) #include <stdlib.h> +#include <string.h> +#include <sys/types.h> +#include <sys/stat.h> #include "flash.h" #include "programmer.h" +#include "chipdrivers.h" #include "hwaccess.h" +#include "spi.h" +#include <unistd.h> uint8_t *mv_bar; uint16_t mv_iobar; @@ -32,20 +38,46 @@ uint16_t mv_iobar; const struct dev_entry satas_mv[] = { /* 88SX6041 and 88SX6042 are the same according to the datasheet. */ {0x11ab, 0x7042, OK, "Marvell", "88SX7042 PCI-e 4-port SATA-II"}, + {0x1b4b, 0x9445, OK, "Marvell", "88SE9445 PCI-e 4-port SAS/SATA 6 Gbps"}, {0}, }; #define NVRAM_PARAM 0x1045c #define FLASH_PARAM 0x1046c +#define EXPANSION_ROM_WINDOW0_REMAP 0x004c8 +#define SPI_FLASH_CONTROL 0x0c800 +#define SPI_FLASH_ADDRESS 0x0c804 +#define SPI_FLASH_WRITE_DATA 0x0c808 +#define SPI_FLASH_READ_DATA 0x0c80c #define EXPANSION_ROM_BAR_CONTROL 0x00d2c #define PCI_BAR2_CONTROL 0x00c08 #define GPIO_PORT_CONTROL 0x104f0 +static unsigned int spi_write_256_chunksize = 256; + +static int satamv_spi_send_command(struct flashctx *flash, unsigned int writecnt, + unsigned int readcnt, + const unsigned char *writearr, + unsigned char *readarr); +static int satamv_spi_write_256(struct flashctx *flash, uint8_t *buf, + unsigned int start, unsigned int len); static void satamv_chip_writeb(const struct flashctx *flash, uint8_t val, chipaddr addr); static uint8_t satamv_chip_readb(const struct flashctx *flash, const chipaddr addr); + +static const struct spi_programmer spi_programmer_satamv = { + .type = SPI_CONTROLLER_SATAMV, + .max_data_read = MAX_DATA_READ_UNLIMITED, + .max_data_write = MAX_DATA_UNSPECIFIED, + .command = satamv_spi_send_command, + .multicommand = default_spi_send_multicommand, + .read = default_spi_read, + .write_256 = satamv_spi_write_256, + .write_aai = default_spi_write_aai, +}; + static const struct par_programmer par_programmer_satamv = { .chip_readb = satamv_chip_readb, .chip_readw = fallback_chip_readw, @@ -57,6 +89,44 @@ static const struct par_programmer par_programmer_satamv = { .chip_writen = fallback_chip_writen, }; +static int init_94xx(struct pci_dev *dev) +{ + uintptr_t addr; + uint32_t tmp; + + msg_pspew("Initializing 94xx\n"); + + addr = pcidev_readbar(dev, PCI_BASE_ADDRESS_2); + if (!addr) + return 1; + msg_pspew("addr=0x%08" PRIXPTR "\n", addr); + + mv_bar = rphysmap("Marvell 88SE94xx registers", addr, 0x40000); + if (mv_bar == ERROR_PTR) + return 1; + msg_pspew("mv_bar=%p\n", mv_bar); + + /* Read some registers for fun. + * TODO: Remove once everything is working + */ + tmp = pci_mmio_readl(mv_bar + EXPANSION_ROM_WINDOW0_REMAP); + msg_pspew("PCIe Expansion ROM Window Remap: 0x%04x\n", tmp); + + tmp = pci_mmio_readl(mv_bar + SPI_FLASH_CONTROL); + msg_pspew("SPI Flash Control: 0x%08x\n", tmp); + + tmp = pci_mmio_readl(mv_bar + SPI_FLASH_ADDRESS); + msg_pspew("SPI Flash Address: 0x%08x\n", tmp); + + tmp = pci_mmio_readl(mv_bar + SPI_FLASH_READ_DATA); + msg_pspew("SPI Flash Read Data: 0x%08x\n", tmp); + + /* Register SPI programmer */ + register_spi_programmer(&spi_programmer_satamv); + + return 0; +} + /* * Random notes: * FCE# Flash Chip Enable @@ -78,6 +148,7 @@ int satamv_init(void) struct pci_dev *dev = NULL; uintptr_t addr; uint32_t tmp; + uint16_t id; if (rget_io_perms()) return 1; @@ -87,6 +158,12 @@ int satamv_init(void) if (!dev) return 1; + id = dev->device_id; + + /* If 9445, do separate init */ + if (id == 0x9445) + return init_94xx(dev); + addr = pcidev_readbar(dev, PCI_BASE_ADDRESS_0); if (!addr) return 1; @@ -192,6 +269,80 @@ static uint8_t satamv_chip_readb(const struct flashctx *flash, return satamv_indirect_chip_readb(addr); } +static int satamv_spi_send_command(struct flashctx *flash, unsigned int writecnt, + unsigned int readcnt, + const unsigned char *writearr, + unsigned char *readarr) +{ + uint8_t busy; + int i; + + msg_pspew("%s:", __func__); + msg_pspew(" SPI Flash Control Start: 0x%04x", pci_mmio_readl(mv_bar + SPI_FLASH_CONTROL)); + msg_pspew(" writecnt=%d, readcnt=%d\n", writecnt, readcnt); + + for (i = 0; i < writecnt; i++) + msg_pspew("writearr[%d]=0x%x\n", i, writearr[i]); + + do { + busy = pci_mmio_readl(mv_bar + SPI_FLASH_CONTROL); + msg_pspew("SPI Flash Control during busy wait (while loop 1): 0x%04x\n", busy); + busy &= 0x1; + } while (busy); + + if (readcnt > 4) { + msg_pinfo("%s called with unsupported readcnt %i.\n", + __func__, readcnt); + return SPI_INVALID_LENGTH; + } + + /* Write FFs to WRITE_DATA and READ_DATA */ + pci_mmio_writel(0xffffffff, mv_bar + SPI_FLASH_WRITE_DATA); + pci_mmio_writel(0xffffffff, mv_bar + SPI_FLASH_READ_DATA); + + switch (writecnt) { + case 1: + pci_mmio_writel((0x00000005 | (writearr[0]<<8) | (readcnt<<4)), mv_bar + SPI_FLASH_CONTROL); + break; + case 2: + break; + case 4: + break; + case 5: + break; + default: + msg_pinfo("%s called with unsupported writecnt %i.\n", + __func__, writecnt); + return SPI_INVALID_LENGTH; + } + + if (readcnt > 0) { + do { + busy = pci_mmio_readl(mv_bar + SPI_FLASH_CONTROL); + msg_pspew("SPI Flash Control during busy wait (while loop 2): 0x%04x\n", busy); + busy &= 0x1; + } while (busy); + + /* Read from SPI Flash */ + pci_mmio_writel((0x00000005 | (readcnt<<4)), mv_bar + SPI_FLASH_CONTROL); + msg_pspew("SPI Return: 0x%04x\n", pci_mmio_readl(mv_bar + SPI_FLASH_READ_DATA)); + + for (i = 0; i < readcnt; i++) + readarr[i] = pci_mmio_readl(mv_bar + SPI_FLASH_READ_DATA); + } + + msg_pspew("SPI Flash Control End: 0x%04x\n", pci_mmio_readl(mv_bar + SPI_FLASH_CONTROL)); + + return 0; +} + +static int satamv_spi_write_256(struct flashctx *flash, uint8_t *buf, + unsigned int start, unsigned int len) +{ + return spi_write_chunked(flash, buf, start, len, + spi_write_256_chunksize); +} + #else #error PCI port I/O access is not supported on this architecture yet. #endif -- 1.9.2

3 6

[PATCH] Added support for automatic uploading of log files
by Michael Coppola 29 Apr '14

29 Apr '14

Picked off "Add automatic uploading of log files" from the easy projects wiki. Right now it requires the -o option to log to file, and then uploads the log file contents to the pastebin. It's possible to bypass this step and just maintain the log in memory, but it felt weird keeping a constantly reallocating heap buffer of possibly infinite size. Did some minimal testing and it seems to be working okay. Signed-off-by: Michael Coppola <michael.n.coppola(a)gmail.com>

2 2

Add timeout check to SPI bitbang bus request
by Carl-Daniel Hailfinger 29 Apr '14

29 Apr '14

Hi Iain, your Intel 82540EM which hangs on a flashrom run should spew "Timeout!" messages with this patch. It would be nice if you could tell us how long it waits for each chip probe so I can adjust the timeout value. Please note that this patch will _not_ fix the underlying issue, but I believe that an endless loop on possibly broken hardware is worse than aborting. Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006(a)gmx.net> Index: flashrom-bitbang_timeout/flash.h =================================================================== --- flashrom-bitbang_timeout/flash.h (Revision 1185) +++ flashrom-bitbang_timeout/flash.h (Arbeitskopie) @@ -35,6 +35,9 @@ #define ERROR_PTR ((void*)-1) +/* Error codes */ +#define TIMEOUT_ERROR -101 + typedef unsigned long chipaddr; int register_shutdown(void (*function) (void *data), void *data); Index: flashrom-bitbang_timeout/bitbang_spi.c =================================================================== --- flashrom-bitbang_timeout/bitbang_spi.c (Revision 1185) +++ flashrom-bitbang_timeout/bitbang_spi.c (Arbeitskopie) @@ -53,10 +53,11 @@ return bitbang_spi_master->get_miso(); } -static void bitbang_spi_request_bus(void) +static int bitbang_spi_request_bus(void) { if (bitbang_spi_master->request_bus) - bitbang_spi_master->request_bus(); + return bitbang_spi_master->request_bus(); + return 0; } static void bitbang_spi_release_bus(void) @@ -86,7 +87,7 @@ bitbang_spi_master = master; bitbang_spi_half_period = halfperiod; - /* FIXME: Run bitbang_spi_request_bus here or in programmer init? */ + /* FIXME: Run bitbang_spi_request_bus here or per command? */ bitbang_spi_set_cs(1); bitbang_spi_set_sck(0); bitbang_spi_set_mosi(0); @@ -131,13 +132,15 @@ int bitbang_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr) { - int i; + int i, ret; /* FIXME: Run bitbang_spi_request_bus here or in programmer init? * Requesting and releasing the SPI bus is handled in here to allow the * programmer to use its own SPI engine for native accesses. */ - bitbang_spi_request_bus(); + ret = bitbang_spi_request_bus(); + if (ret) + return ret; bitbang_spi_set_cs(0); for (i = 0; i < writecnt; i++) bitbang_spi_readwrite_byte(writearr[i]); Index: flashrom-bitbang_timeout/nicintel_spi.c =================================================================== --- flashrom-bitbang_timeout/nicintel_spi.c (Revision 1185) +++ flashrom-bitbang_timeout/nicintel_spi.c (Arbeitskopie) @@ -58,6 +58,8 @@ // #define FL_BUSY 30 // #define FL_ER 31 +#define MAX_REQUEST_LOOPS 10000 + uint8_t *nicintel_spibar; const struct pcidev_status nics_intel_spi[] = { @@ -68,16 +70,27 @@ {}, }; -static void nicintel_request_spibus(void) +static void nicintel_release_spibus(void); + +static int nicintel_request_spibus(void) { uint32_t tmp; + int i = 0; tmp = pci_mmio_readl(nicintel_spibar + FLA); tmp |= 1 << FL_REQ; pci_mmio_writel(tmp, nicintel_spibar + FLA); /* Wait until we are allowed to use the SPI bus. */ - while (!(pci_mmio_readl(nicintel_spibar + FLA) & (1 << FL_GNT))) ; + while (!(pci_mmio_readl(nicintel_spibar + FLA) & (1 << FL_GNT))) { + if (i++ > MAX_REQUEST_LOOPS) { + nicintel_release_spibus(); + msg_perr("%s: Timeout! Aborting.\n", __func__); + return TIMEOUT_ERROR; + } + } + + return 0; } static void nicintel_release_spibus(void) Index: flashrom-bitbang_timeout/mcp6x_spi.c =================================================================== --- flashrom-bitbang_timeout/mcp6x_spi.c (Revision 1185) +++ flashrom-bitbang_timeout/mcp6x_spi.c (Arbeitskopie) @@ -40,22 +40,37 @@ #define MCP6X_SPI_REQUEST 0 #define MCP6X_SPI_GRANT 8 +#define MAX_REQUEST_LOOPS 10000 + void *mcp6x_spibar = NULL; /* Cached value of last GPIO state. */ static uint8_t mcp_gpiostate; -static void mcp6x_request_spibus(void) +static void mcp6x_release_spibus(void); + +static int mcp6x_request_spibus(void) { + int i = 0; + mcp_gpiostate = mmio_readb(mcp6x_spibar + 0x530); mcp_gpiostate |= 1 << MCP6X_SPI_REQUEST; mmio_writeb(mcp_gpiostate, mcp6x_spibar + 0x530); /* Wait until we are allowed to use the SPI bus. */ - while (!(mmio_readw(mcp6x_spibar + 0x530) & (1 << MCP6X_SPI_GRANT))) ; + while (!(mmio_readw(mcp6x_spibar + 0x530) & (1 << MCP6X_SPI_GRANT))) { + if (i++ > MAX_REQUEST_LOOPS) { + /* Update the cache. */ + mcp_gpiostate = mmio_readb(mcp6x_spibar + 0x530); + mcp6x_release_spibus(); + msg_perr("%s: Timeout! Aborting.\n", __func__); + return TIMEOUT_ERROR; + } + } /* Update the cache. */ mcp_gpiostate = mmio_readb(mcp6x_spibar + 0x530); + return 0; } static void mcp6x_release_spibus(void) Index: flashrom-bitbang_timeout/programmer.h =================================================================== --- flashrom-bitbang_timeout/programmer.h (Revision 1185) +++ flashrom-bitbang_timeout/programmer.h (Arbeitskopie) @@ -131,7 +131,7 @@ void (*set_sck) (int val); void (*set_mosi) (int val); int (*get_miso) (void); - void (*request_bus) (void); + int (*request_bus) (void); void (*release_bus) (void); }; -- http://www.hailfinger.org/

4 15

Re: [flashrom] Flashrom stuck using 100% cpu while probing for a chip
by GatoLoko 29 Apr '14

29 Apr '14

El 28/04/14 21:02, David Hendricks escribió: > It's not too surprising... Flashrom does not trust OS timers and uses > its own delay mechanism > <http://tracker.coreboot.org/trac/flashrom/browser/trunk/udelay.c#L33> (a busy > loop). It can be argued whether or not it should, but this approach is > deemed more acceptable in the general case. This also has the > side-effect of pegging a CPU at 100%. To be fair, the problem isn't that flashrom uses 100% CPU, but that it does nothing while using 100% CPU. If it failed (with a proper fail message) or complete it's task I wouldn't care about the CPU usage. The real problem is that it gets stuck doing nothing. > More specifically, the timeout periods in the chips and host controllers > which flashrom is often used on tends to be very tight, and usleep() or > nanosleep() only guarantee will wait for a minimum amount of time but > make no guarantees about a maximum amount of time. Obviously it's very > bad if flashrom goes to sleep for too long and a transaction is aborted > because it took the OS a bit too long to wake flashrom up. I don't know how long of a delay this may impose, but I doubt this amounts to 15 minutes doing nothing. The logs attached in my previous message are from a 16 minutes runtime where only the first few seconds did something. The last 15 minutes the logs got nothing new, and the program did nothing. The same thing happens if I don't specify the chip, it just gets stuck on the first chip it tries. -- GatoLoko

1 1

Re: [flashrom] [PATCH] nicintel_eeprom: New programmer for Intel Nics eeproms
by Ricardo Ribalda Delgado 28 Apr '14

28 Apr '14

Hello Could you give a response? Thanks On Thu, Feb 6, 2014 at 10:42 PM, Ricardo Ribalda Delgado <ricardo.ribalda(a)gmail.com> wrote: > ping? > > > On Mon, Dec 2, 2013 at 4:45 PM, Ricardo Ribalda Delgado > <ricardo.ribalda(a)gmail.com> wrote: >> >> Hello >> >> Is there any status change here? There are other people using this patch. >> >> http://www.projectosx.com/forum/index.php?showtopic=2485&st=20&start=20 >> >> Thanks! >> >> >> On Thu, Sep 12, 2013 at 1:26 PM, Ricardo Ribalda Delgado >> <ricardo.ribalda(a)gmail.com> wrote: >> > Hello Stefan >> > >> > On Thu, Sep 12, 2013 at 12:08 PM, Stefan Tauner >> > <stefan.tauner(a)student.tuwien.ac.at> wrote: >> >> On Thu, 12 Sep 2013 11:25:39 +0200 >> >> Ricardo Ribalda Delgado <ricardo.ribalda(a)gmail.com> wrote: >> >> >> >>> ping? >> >> >> >> Hi Ricardo, >> >> >> >> I would have hoped for a more generic patch that adds some >> >> eeprom-specific infrastructure, but your approach seems to be legit >> >> when implementing this with the current infrastructure in flashrom. >> >> Sorry for not mentioning the opaque API before, that is of course the >> >> easiest way to get such things to work. >> > >> > I thought about it, but I soon realized that it was probably not the >> > best option. >> > >> > The intel cards supports a limited ammount of chips, and the >> > read/write is not very standard. They are read by the card firmware, >> > but written with something spi_alike, but no jedec or anything to find >> > out the model of the eeprom. >> > >> >> >> >> Would it be even possible to probe for IDs of the EEPROMs with the >> >> interface on the Intel NICs? What EEPROM model(s) do see on your >> >> boards? >> > >> > You can ask the network card for the size of the eeprom. That is done >> > in nicintel_ee_probe >> > >> > According to the doc this eeproms can be used: >> > >> > 128 AT25128AN-10SI-2.7 M95128WMN6T CAT25CS128-TE13 >> > 256 AT25256AN-10SI-2.7 M95256WMN6T >> > >> > All of them have the same instruction set. And unfortunately there is >> > no id instruction >> > >> > So, if the board is an intel card and it says that the size is 128 >> > kbits, then it is a chip from the first row, otherwise it is from the >> > second >> > >> >> >> >> I have not reviewed your patch in detail yet. There are probably a few >> >> coding style issues etc., but we can fix that ourselves if we have to. >> > >> > I could not find a coding style, so I tried to stick to the kernel one. >> > >> >> The bigger question is if we want to add something like it at all. I >> >> don't see good reason why we should not, but I need to discuss this >> >> with my colleague(s) (and that usually takes more time than one would >> >> expect). In any case your code is out there and can be used even if it >> >> does not get merged into vanilla flashrom eventually and your work is >> >> much appreciated, thank you. >> > >> > That was the whole point, that this could be reused by somebody else. >> > And the program more standard up to date is yours :) >> > >> > Thaks! >> > >> > >> >> -- >> >> Kind regards/Mit freundlichen Grüßen, Stefan Tauner >> > >> > >> > >> > -- >> > Ricardo Ribalda >> >> >> >> -- >> Ricardo Ribalda > > > > > -- > Ricardo Ribalda -- Ricardo Ribalda

1 0

Flashrom stuck using 100% cpu while probing for a chip
by GatoLoko 28 Apr '14

28 Apr '14

I've tried to run flashrom -V to see if it could identify the chip on my new board (AsRock M3A-GLAN), and it got stuck while probing for the first chip. I've tried commenting out that specific chip (AMIC A25L05PT) and then it gets stuck on the next one. Then commented out all AMIC chips, and it got stuck on the next one (the first ATMEL on the list) I've tried with an older flashrom (0.9.2-r1141). It skipped some AMD chips, then got stuck on AMIC again. Talked with "tlt" and "stefanct" on irc and they asked for a strace and a gdb backtrace. Strace produced no results. Gdb log is attached. "stefanct" tried and reproduced it on a machine with nicintel_spi, but warned it was with an unsupported nic: http://paste.flashrom.org/view.php?id=738 -- GatoLoko

4 11

PID ID for TUMPA Lite Edition in FT2232
by Jadran Puharic 28 Apr '14

28 Apr '14

I have a TUMPA Lite edition it is FTDI Based Board similar to TUMPA/FT232H, but single channel: http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_Lite_User's_Manual You can build one from upper link, or buy cheap on ebay. And I added this to ft2232_spi.c --- ../flashrom/ft2232_spi.c 2013-09-17 19:43:16.000000000 +0200 +++ ft2232_spi.c 2014-01-24 11:57:49.000000000 +0100 @@ -43,6 +43,7 @@ #define FTDI_FT4232H_PID 0x6011 #define FTDI_FT232H_PID 0x6014 #define TIAO_TUMPA_PID 0x8a98 +#define TIAO_TUMPA_LITE_PID 0x8a99 #define AMONTEC_JTAGKEY_PID 0xCFF8 #define GOEPEL_VID 0x096C @@ -62,6 +63,7 @@ {FTDI_VID, FTDI_FT4232H_PID, OK, "FTDI", "FT4232H"}, {FTDI_VID, FTDI_FT232H_PID, OK, "FTDI", "FT232H"}, {FTDI_VID, TIAO_TUMPA_PID, OK, "TIAO", "USB Multi-Protocol Adapter"}, + {FTDI_VID, TIAO_TUMPA_LITE_PID, OK, "TIAO", "USB Multi-Protocol Adapter Lite"}, {FTDI_VID, AMONTEC_JTAGKEY_PID, OK, "Amontec", "JTAGkey"}, {GOEPEL_VID, GOEPEL_PICOTAP_PID, OK, "GOEPEL", "PicoTAP"}, {FIC_VID, OPENMOKO_DBGBOARD_PID, OK, "FIC", "OpenMoko Neo1973 Debug board (V2+)"}, @@ -208,6 +210,10 @@ /* Interface A is SPI1, B is SPI2. */ ft2232_type = TIAO_TUMPA_PID; channel_count = 2; + } else if (!strcasecmp(arg, "tumpalite")) { + /* Only one channel is used on lite edition */ + ft2232_type = TIAO_TUMPA_LITE_PID; + channel_count = 1; } else if (!strcasecmp(arg, "busblaster")) { /* In its default configuration it is a jtagkey clone */ ft2232_type = FTDI_FT2232H_PID; works as advertised. BRGDS, Jadran Puharic

2 2

Winbond W25X32 Read, Erase and Write tested (with serprog Arduino-Programmer) and all works!
by The Raven 27 Apr '14

27 Apr '14

See the attached Logs for details. All Operations seems to work. I have done more than one "read" and the verify is always ok. If you need more tests or something else, let me know. Greetings Raven

2 2

Mark MCP51 variant 0x0261 as tested.
by Marcin Kościelnicki 27 Apr '14

27 Apr '14

Signed-off-by: Marcin Kościelnicki <koriakin(a)0x04.net> Index: chipset_enable.c =================================================================== --- chipset_enable.c (revision 1764) +++ chipset_enable.c (working copy) @@ -1418,7 +1418,7 @@ /* Slave, should not be here, to fix known bug for A01. */ {0x10de, 0x00d3, OK, "NVIDIA", "CK804", enable_flash_ck804}, {0x10de, 0x0260, OK, "NVIDIA", "MCP51", enable_flash_ck804}, - {0x10de, 0x0261, NT, "NVIDIA", "MCP51", enable_flash_ck804}, + {0x10de, 0x0261, OK, "NVIDIA", "MCP51", enable_flash_ck804}, {0x10de, 0x0262, NT, "NVIDIA", "MCP51", enable_flash_ck804}, {0x10de, 0x0263, NT, "NVIDIA", "MCP51", enable_flash_ck804}, {0x10de, 0x0360, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* M57SLI*/

2 1

[commit] r1781 - in trunk: . util
by repository service 27 Apr '14

27 Apr '14

Author: stefanct Date: Sun Apr 27 07:07:35 2014 New Revision: 1781 URL: http://flashrom.org/trac/flashrom/changeset/1781 Log: ft2232_spi: Add support for TUMPA Lite. http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_Lite_User's_Manual Initial patch from Jadran Puharic <jpuharic(a)gmail.com>. Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Modified: trunk/flashrom.8.tmpl trunk/ft2232_spi.c trunk/util/z60_flashrom.rules Modified: trunk/flashrom.8.tmpl ============================================================================== --- trunk/flashrom.8.tmpl Sat Apr 26 18:13:09 2014 (r1780) +++ trunk/flashrom.8.tmpl Sun Apr 27 07:07:35 2014 (r1781) @@ -197,7 +197,7 @@ FTDI FT2232H Mini-Module, FTDI FT4232H Mini-Module, openbiosprog-spi, Amontec \ JTAGkey/JTAGkey-tiny/JTAGkey-2, Dangerous Prototypes Bus Blaster, \ Olimex ARM-USB-TINY/-H, Olimex ARM-USB-OCD/-H, TIAO/DIYGADGET USB -Multi-Protocol Adapter (TUMPA), and GOEPEL PicoTAP. +Multi-Protocol Adapter (TUMPA), TUMPA Lite, and GOEPEL PicoTAP. .sp .BR "* serprog" " (for flash ROMs attached to a programmer speaking serprog), \ including AVR flasher by Urja Rannikko, AVR flasher by eightdot, \ @@ -599,7 +599,7 @@ can be .BR 2232H ", " 4232H ", " 232H ", " jtagkey ", " busblaster ", " openmoko ", " \ arm-usb-tiny ", " arm-usb-tiny-h ", " arm-usb-ocd ", " arm-usb-ocd-h \ -", " tumpa ", or " picotap +", " tumpa ", " tumpalite ", or " picotap and .B interface can be Modified: trunk/ft2232_spi.c ============================================================================== --- trunk/ft2232_spi.c Sat Apr 26 18:13:09 2014 (r1780) +++ trunk/ft2232_spi.c Sun Apr 27 07:07:35 2014 (r1781) @@ -43,6 +43,7 @@ #define FTDI_FT4232H_PID 0x6011 #define FTDI_FT232H_PID 0x6014 #define TIAO_TUMPA_PID 0x8a98 +#define TIAO_TUMPA_LITE_PID 0x8a99 #define AMONTEC_JTAGKEY_PID 0xCFF8 #define GOEPEL_VID 0x096C @@ -62,6 +63,7 @@ {FTDI_VID, FTDI_FT4232H_PID, OK, "FTDI", "FT4232H"}, {FTDI_VID, FTDI_FT232H_PID, OK, "FTDI", "FT232H"}, {FTDI_VID, TIAO_TUMPA_PID, OK, "TIAO", "USB Multi-Protocol Adapter"}, + {FTDI_VID, TIAO_TUMPA_LITE_PID, OK, "TIAO", "USB Multi-Protocol Adapter Lite"}, {FTDI_VID, AMONTEC_JTAGKEY_PID, OK, "Amontec", "JTAGkey"}, {GOEPEL_VID, GOEPEL_PICOTAP_PID, OK, "GOEPEL", "PicoTAP"}, {FIC_VID, OPENMOKO_DBGBOARD_PID, OK, "FIC", "OpenMoko Neo1973 Debug board (V2+)"}, @@ -208,6 +210,10 @@ /* Interface A is SPI1, B is SPI2. */ ft2232_type = TIAO_TUMPA_PID; channel_count = 2; + } else if (!strcasecmp(arg, "tumpalite")) { + /* Only one channel is used on lite edition */ + ft2232_type = TIAO_TUMPA_LITE_PID; + channel_count = 1; } else if (!strcasecmp(arg, "busblaster")) { /* In its default configuration it is a jtagkey clone */ ft2232_type = FTDI_FT2232H_PID; Modified: trunk/util/z60_flashrom.rules ============================================================================== --- trunk/util/z60_flashrom.rules Sat Apr 26 18:13:09 2014 (r1780) +++ trunk/util/z60_flashrom.rules Sun Apr 27 07:07:35 2014 (r1781) @@ -80,4 +80,8 @@ # http://www.diygadget.com/tiao-usb-multi-protocol-adapter-jtag-spi-i2c-seria… ATTRS{idVendor}=="0403", ATTRS{idProduct}=="8a98", MODE="664", GROUP="plugdev" +# TIAO/DIYGADGET USB Multi-Protocol Adapter (TUMPA) Lite +# http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_Lite_User's_Manual +ATTRS{idVendor}=="0403", ATTRS{idProduct}=="8a99", MODE="664", GROUP="plugdev" + LABEL="flashrom_rules_end"

1 0

Re: [flashrom] HM77 probe, read, write OK
by Stefan Tauner 27 Apr '14

27 Apr '14

On Thu, 27 Mar 2014 16:55:35 +0400 Vasiliy Vylegzhanin <6vasia(a)gmail.com> wrote: > flashrom code is slightly modified for region write and predefined ICH > descriptor regions, but chipset-related code is vanilla. In fact, only > flashrom.c and layout.c is patched. Hello Vasiliy, thanks for your report! I have added your chipset to our list of supported hardware and will commit that later together with other small changes. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] C204 write log
by Stefan Tauner 27 Apr '14

27 Apr '14

On Wed, 16 Apr 2014 14:19:21 +0400 Vasiliy Vylegzhanin <6vasia(a)gmail.com> wrote: > Works fine. flashrom r1711 + layout patches. Hello Vasiliy, thanks for your report! I have added the chipset to our list of supported hardware and will commit that later together with other small changes. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[PATCH] CID1130009: Resource leak
by Stefan Reinauer 26 Apr '14

26 Apr '14

CID1130009: Resource leak The system resource will not be reclaimed and reused, reducing the future availability of the resource. In sp_opensocket: Leak of memory or pointers to system resources Signed-off-by: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Index: serprog.c =================================================================== --- serprog.c (revision 1763) +++ serprog.c (working copy) @@ -100,6 +100,7 @@ if (NULL == hostPtr) { hostPtr = gethostbyaddr(ip, strlen(ip), AF_INET); if (NULL == hostPtr) { + close(sock); msg_perr("Error: cannot resolve %s\n", ip); return -1; }

2 1

[PATCH] CID1130008: Resource leak
by Stefan Reinauer 26 Apr '14

26 Apr '14

CID1130008: Resource leak The system resource will not be reclaimed and reused, reducing the future availability of the resource. In read_romlayout: Leak of memory or pointers to system resources Signed-off-by: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Index: layout.c =================================================================== --- layout.c (revision 1763) +++ layout.c (working copy) @@ -65,6 +65,7 @@ if (num_rom_entries >= MAX_ROMLAYOUT) { msg_gerr("Maximum number of ROM images (%i) in layout " "file reached.\n", MAX_ROMLAYOUT); + fclose(romlayout); return 1; } if (2 != fscanf(romlayout, "%s %s\n", tempstr, rom_entries[num_rom_entries].name))

2 1

[PATCH] CID1130007: Resource leak
by Stefan Reinauer 26 Apr '14

26 Apr '14

CID1130007: Resource leak The system resource will not be reclaimed and reused, reducing the future availability of the resource. In ogp_spi_init: Leak of memory or pointers to system resources Signed-off-by: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Index: ogp_spi.c =================================================================== --- ogp_spi.c (revision 1763) +++ ogp_spi.c (working copy) @@ -120,8 +120,10 @@ ogp_reg_sck = OGA1_XP10_CPROM_SCK; } else { msg_perr("Invalid or missing rom= parameter.\n"); + free(type); return 1; } + free(type); if (rget_io_perms()) return 1;

2 1

[PATCH] CID1130011: Use after free
by Stefan Reinauer 26 Apr '14

26 Apr '14

CID1130011: Use after free This could cause an immediate crash or incorrect values might be read subsequently resulting in incorrect computations. In dump_file: A pointer to freed memory is dereferenced, used as a function argument, or otherwise used Signed-off-by: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Index: util/ich_descriptors_tool/ich_descriptors_tool.c =================================================================== --- util/ich_descriptors_tool/ich_descriptors_tool.c (revision 1763) +++ util/ich_descriptors_tool/ich_descriptors_tool.c (working copy) @@ -77,12 +77,13 @@ printf("Dumping %u bytes of the %s region from 0x%08x-0x%08x to %s... ", file_len, region_names[i], base, limit, fn); int fh = open(fn, O_WRONLY | O_CREAT, S_IRUSR | S_IWUSR); - free(fn); if (fh < 0) { fprintf(stderr, "ERROR: couldn't open(%s): %s\n", fn, strerror(errno)); + free(fn); exit(1); } + free(fn); ret = write(fh, &dump[base >> 2], file_len); if (ret != file_len) {

2 1

[PATCH] CID1130012: Double free
by Stefan Reinauer 26 Apr '14

26 Apr '14

CID1130012: Double free Depending on the implementation of the deallocator function, the memory may by placed on the free list more than once. In pony_spi_init: Memory is deallocated more than once Signed-off-by: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Index: pony_spi.c =================================================================== --- pony_spi.c (revision 1763) +++ pony_spi.c (working copy) @@ -140,6 +140,7 @@ } else if (arg && !strlen(arg)) { msg_perr("Error: Missing argument for programmer type.\n"); free(arg); + return 1; } else if (arg){ msg_perr("Error: Invalid programmer type specified.\n"); free(arg);

2 1

[PATCH] CID1130004: Nesting level does not match indentation
by Stefan Reinauer 26 Apr '14

26 Apr '14

CID1130004: Nesting level does not match indentation Code that is meant to be executed conditionally may be executed unconditionally In print_supported_boards_helper: The indentation of this code suggests it is nested when it is not. Signed-off-by: Stefan Reinauer <stefan.reinauer(a)coreboot.org> Index: print.c =================================================================== --- print.c (revision 1763) +++ print.c (working copy) @@ -436,13 +436,14 @@ msg_ginfo("%s", b->name); for (i = 0; i < maxboardlen - strlen(b->name); i++) msg_ginfo(" "); - if (b->working == OK) - msg_ginfo("OK "); - else if (b->working == NT) - msg_ginfo("NT "); - else - msg_ginfo("BAD "); + if (b->working == OK) + msg_ginfo("OK "); + else if (b->working == NT) + msg_ginfo("NT "); + else + msg_ginfo("BAD "); + for (e = board_matches; e->vendor_name != NULL; e++) { if (strcmp(e->vendor_name, b->vendor) || strcmp(e->board_name, b->name))

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom