- flashrom - mail.coreboot.org

Pegatron/Asus M2N68-LA: flashrom -V
by Kristian Rasmussen 07 May '14

07 May '14

Erase fails on this board: flashrom v0.9.6.1-r1564 on Linux 3.12.12-alt401-amd64 (x86_64) flashrom was built with libpci 3.2.1, GCC 4.4.7, little endian Command line (5 args): flashrom -p internal -V -o flashrom.log Calibrating delay loop... OS timer resolution is 2 usecs, 1349M loops per second, 10 myus = 11 us, 100 myus = 100 us, 1000 myus = 1003 us, 10000 myus = 10006 us, 8 myus = 9 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Hewlett-Packard" DMI string system-product-name: "HP Compaq dx2450 Microtower" DMI string system-version: " " DMI string baseboard-manufacturer: "PEGATRON CORPORATION" DMI string baseboard-product-name: "2A72h" DMI string baseboard-version: "3.02" DMI string chassis-type: "Desktop" Found chipset "NVIDIA MCP61" with PCI ID 10de:03e0. Enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Flash bus type is SPI SPI on this chipset is WIP. Please report any success or failure by mailing us the verbose output to flashrom(a)flashrom.org, thanks! Found SMBus device 10de:03eb at 00:01:1 MCP SPI BAR is at 0xfec80000 Mapping NVIDIA MCP6x SPI at 0xfec80000, unaligned size 0x544. SPI control is 0x0111, req=1, gnt=1 Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. The following protocols are supported: SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for GigaDevice GD25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Chip status register is 9e Chip status register: Status Register Write Disable (SRWD) is set Chip status register: Bit 6 is not set Chip status register: Block Protect 3 (BP3) is not set Chip status register: Block Protect 2 (BP2) is set Chip status register: Block Protect 1 (BP1) is set Chip status register: Block Protect 0 (BP0) is set Chip status register: Write Enable Latch (WEL) is set Chip status register: Write In Progress (WIP/BUSY) is not set Found Macronix flash chip "MX25L8005" (1024 kB, SPI) at physical address 0xfff00000. Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Numonyx N25Q064, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25LF080A, 1024 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xc2, id2 0x13 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Unknown SFDP-capable chip, 0 kB: Signature = 0xffffffff (should be 0x50444653) No SFDP signature found. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xc2, id2 0x2014 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xc2, id2 0x13 Found Macronix flash chip "MX25L8005" (1024 kB, SPI). No operations were specified.

2 5

Re: [flashrom] [patch] add SST25LF020A SPI flash chip support
by Stefan Tauner 07 May '14

07 May '14

On Tue, 6 May 2014 19:12:55 +0200 Idwer Vollering <vidwer(a)gmail.com> wrote: > See patch. > > Signed-off-by: Idwer Vollering <vidwer(a)gmail.com> Thanks. I had to change the comment for .read and also set the .tested flag according to Idwer's tests on top of this. Acked-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> and committed in r1787. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[commit] r1787 - trunk
by repository service 07 May '14

07 May '14

Author: stefanct Date: Wed May 7 17:25:04 2014 New Revision: 1787 URL: http://flashrom.org/trac/flashrom/changeset/1787 Log: Add support for SST25LF020A. Tested on hardware by Idwer too. Signed-off-by: Idwer Vollering <vidwer(a)gmail.com> Acked-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Modified: trunk/flashchips.c trunk/flashchips.h Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Sun May 4 23:44:13 2014 (r1786) +++ trunk/flashchips.c Wed May 7 17:25:04 2014 (r1787) @@ -9614,6 +9614,38 @@ { .vendor = "SST", + .name = "SST25LF020A", + .bustype = BUS_SPI, + .manufacture_id = SST_ID, + .model_id = SST_SST25VF020_REMS, + .total_size = 256, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EWSR, + .tested = TEST_OK_PREW, + .probe = probe_spi_rems, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 64} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 8} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, + }, + .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */ + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "SST", .name = "SST25LF040A", .bustype = BUS_SPI, .manufacture_id = SST_ID, Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Sun May 4 23:44:13 2014 (r1786) +++ trunk/flashchips.h Wed May 7 17:25:04 2014 (r1787) @@ -574,6 +574,7 @@ * byte of device ID is related to log(bitsize) at least for some chips. */ #define SST_ID 0xBF /* SST */ +#define SST_SST25LF020_REMS 0x43 /* REMS or RES opcode */ #define SST_SST25WF512 0x2501 #define SST_SST25WF010 0x2502 #define SST_SST25WF020 0x2503 @@ -581,7 +582,7 @@ #define SST_SST25WF080 0x2505 #define SST_SST25VF512A_REMS 0x48 /* REMS or RES opcode */ #define SST_SST25VF010_REMS 0x49 /* REMS or RES opcode */ -#define SST_SST25VF020_REMS 0x43 /* REMS or RES opcode */ +#define SST_SST25VF020_REMS 0x43 /* REMS or RES opcode, same as SST25LF020A */ #define SST_SST25VF020B 0x258C #define SST_SST25VF040_REMS 0x44 /* REMS or RES opcode, same as SST25LF040A */ #define SST_SST25VF040B 0x258D

1 0

Re: [flashrom] [PATCH] Add support for SST26VF064B
by Stefan Tauner 06 May '14

06 May '14

On Tue, 6 May 2014 14:24:43 -0700 Wei Hu <wei(a)arista.com> wrote: > Maybe you're right, but I was able to erase/write the chip with my patch. Interesting, thank you. IIRC the protection is on by default... you successful modification contradicts my hypothesis that your patch is not able to disable the protection. I'll re-read the datasheet before including the patch. Another write test with my version would be much appreciated, just to make sure my version is no regression to yours. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] [PATCH] Add support for SST26VF064B
by Stefan Tauner 06 May '14

06 May '14

On Mon, 5 May 2014 14:17:05 -0700 Wei Hu <wei(a)arista.com> wrote: > On Sun, May 4, 2014 at 1:06 PM, Stefan Tauner > <stefan.tauner(a)alumni.tuwien.ac.at> wrote: > > On Mon, 31 Mar 2014 22:18:48 -0700 > > Wei Hu <wei(a)aristanetworks.com> wrote: > > > >> Datasheet available at > >> http://ww1.microchip.com/downloads/en/DeviceDoc/20005119D.pdf > > > > Hi, > > > > thank you for your patch! I have reviewed it and I think you got a few > > things wrong: > > - Most importantly, I think the block erase sizes are non-uniform > > (for opcode 0xD8). See note 11 of Table 5.1 and Section 3.0 etc. > > Thanks for fixing the non-uniform layout! Learned something new today. This became rather uncommon with SPI chips but still there are even new chips with this feature. It was very common in older flash chips. We currently support over 100 chips with such a layout (look for ".eraseblocks = {\n" in flashchips.c). > > - Also, the ULBPR requires a WREN opcode sent before it. OTOH your > > spi_disable_blockprotect_generic() calls seems useless (all bits of > > the status register are read-only). > > I know spi_disable_blockprotect_generic() is useless here, but I > thought it was a good idea to call the generic function first in > general? As a side effect of calling this function I'm sending WREN, > so I didn't send on explicitly. There is no "generic" function that always should be called. The spi_disable_blockprotect_generic() function is just generic in the sense that most unprotect schemes can be implemented with it by supplying the respective parameters. Also, the WREN command is only active for one matching operation, and in this case this is the WRSR command that immediately follows it within spi_write_status_register_flag(). So your version would not do what you expect. > > - The spi_prettyprint_status_register_sst25 function is completely > > wrong for these chips. > > - The OTP memory, and other advanced features were not documented at > > all. > > What's OTP? I didn't see it in the datasheet. Why do you want that? One-time-programmable memory, it is noted on the front page of the datahsset and is explained in more detail in 5.27 "Program Security ID". If the flag FEATURE_OTP is set for a chip, we produce the following message: "This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details)." Most users seem to not understand that, but I think nevertheless that it is useful for those that do :) -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

[patch] add SST25LF020A SPI flash chip support
by Idwer Vollering 06 May '14

06 May '14

See patch. Signed-off-by: Idwer Vollering <vidwer(a)gmail.com>

1 0

Asus M2N-MX SE Plus: flashrom -V
by Antonio 06 May '14

06 May '14

flashrom v0.9.5.2-r1546 on Linux 3.13-0.bpo.1-amd64 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.7, GCC 4.6.2, little endian Command line (1 args): flashrom -V Calibrating delay loop... OS timer resolution is 1 usecs, 1406M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 1005 us, 10000 myus = 15528 us, 4 myus = 4 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "System manufacturer" DMI string system-product-name: "System Product Name" DMI string system-version: "System Version" DMI string baseboard-manufacturer: "ASUSTeK Computer INC." DMI string baseboard-product-name: "M2N-MX SE Plus" DMI string baseboard-version: "Rev x.xx" DMI string chassis-type: "Desktop" Found ITE Super I/O, ID 0x8712 on port 0x2e Found chipset "NVIDIA MCP61" with PCI ID 10de:03e0. Enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 Flash bus type is SPI SPI on this chipset is WIP. Please report any success or failure by mailing us the verbose output to flashrom(a)flashrom.org, thanks! Found SMBus device 10de:03eb at 00:01:1 MCP SPI BAR is at 0xfec80000 SPI control is 0x0002, req=0, gnt=0 Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. Super I/O ID 0x8712 is not on the list of flash capable controllers. The following protocols are supported: SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for AMIC A25LQ032, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for EMST F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for GigaDevice GD25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1005, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L2005, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L4005, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L8005, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3205, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L6405, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix MX25L12805, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Numonyx N25Q064, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV010, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC Pm25LV512, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Sanyo LF25FW203A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL032A, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Spansion S25FL064A, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25LF080A, 1024 kB: probe_spi_res2: id1 0x13, id2 0x13 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xef, id2 0x13 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Chip status register is 00 Found Winbond flash chip "W25X80" (1024 kB, SPI) at physical address 0xfff00000. Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Unknown SFDP-capable chip, 0 kB: No SFDP signature found. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xef, id2 0x3014 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xef, id2 0x13 Found Winbond flash chip "W25X80" (1024 kB, SPI). No operations were specified. (Failure to flash bios)

1 0

FM2A88X-ITX+
by Wesley Key 06 May '14

06 May '14

Hello, I just ran flashrom and it stated that SMBus revision number does not match known values. Per request, I'm e-mailing the results of the command: flashrom v0.9.7-r1711 on Linux 3.14.2-1-ARCH (x86_64) flashrom is free software, get the source code at http://www.flashrom.org *Calibrating delay loop... OK.Found chipset "AMD FCH". Enabling flash write... FCH device found but SMBus revision 0x16 does not match known values.Please report this to flashrom(a)flashrom.org <flashrom(a)flashrom.org> and include this log andthe output of lspci -nnvx, thanks!.OK.Found Winbond flash chip "W25Q64.V" (8192 kB, SPI) at physical address 0xff800000.No operations were specified.* Also, attached is the result from *lspci -nnvx. *Please let me know if you have any other questions! Thanks! Wes

1 0

Re: [flashrom] [PATCH] Add support for SST26VF064B
by Stefan Tauner 05 May '14

05 May '14

On Mon, 31 Mar 2014 22:18:48 -0700 Wei Hu <wei(a)aristanetworks.com> wrote: > Datasheet available at > http://ww1.microchip.com/downloads/en/DeviceDoc/20005119D.pdf Hi, thank you for your patch! I have reviewed it and I think you got a few things wrong: - Most importantly, I think the block erase sizes are non-uniform (for opcode 0xD8). See note 11 of Table 5.1 and Section 3.0 etc. - Also, the ULBPR requires a WREN opcode sent before it. OTOH your spi_disable_blockprotect_generic() calls seems useless (all bits of the status register are read-only). - The spi_prettyprint_status_register_sst25 function is completely wrong for these chips. - The OTP memory, and other advanced features were not documented at all. - Debatably the name of the chip should include the optional A that indicates the disable default state of the WP/Hold feature of this chip variant. I have attached my counterproposal that also adds support for the SST26VF032B(A). Please take a look and tell me if you disagree with anything I have changed, thanks. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

Re: [flashrom] [PATCH] Support for S25FL164K/S25FL132K
by Stefan Tauner 04 May '14

04 May '14

On Sat, 3 May 2014 12:59:16 -0400 Nikolay Martynov <mar.kolya(a)gmail.com> wrote: > Hi. > > Yes, I was able to flash that this chip on arduino. I was hesitant > to change value of .tested field because my setup was somewhat 'wacky' > - long wires and stuff, and flashing was not very stable. But this > instability was probably due to > my setup, not because of code/arduino/chip, so I guess you can change > it to TEST_OK_PREW. Ok, understood. There were a few minor error in your patch (unverified facts copied from S25FL116K/S25FL216K which are actually wrong for the S25FL116K too and should be fixed later). I hope I have changed things to the better. I made a few other minor refinements and committed it in r1786. Thanks again for the patch! -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[commit] r1786 - trunk
by repository service 04 May '14

04 May '14

Author: stefanct Date: Sun May 4 23:44:13 2014 New Revision: 1786 URL: http://flashrom.org/trac/flashrom/changeset/1786 Log: Support for Spansion S25FL132K and S25FL164K. Tested with actual S25FL164K via Arduino SPI. Signed-off-by: Nikolay Martynov <mar.kolya(a)gmail.com> Acked-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Modified: trunk/flashchips.c trunk/flashchips.h Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Sun May 4 02:55:24 2014 (r1785) +++ trunk/flashchips.c Sun May 4 23:44:13 2014 (r1786) @@ -9508,6 +9508,76 @@ { .vendor = "Spansion", + .name = "S25FL132K", + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL132K, + .total_size = 4096, + .page_size = 256, + /* OTP: 768B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 4096 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 4096 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp2, /* TODO: improve */ + .unlock = spi_disable_blockprotect_bp2_srwd, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL164K", + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL164K, + .total_size = 8192, + .page_size = 256, + /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 8192 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 8192 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp2, /* TODO: improve */ + .unlock = spi_disable_blockprotect_bp2_srwd, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", .name = "S25FL128S......0", /* uniform 256kB sectors */ .bustype = BUS_SPI, .manufacture_id = SPANSION_ID, Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Sun May 4 02:55:24 2014 (r1785) +++ trunk/flashchips.h Sun May 4 23:44:13 2014 (r1786) @@ -566,6 +566,9 @@ #define SPANSION_S25FL204 0x4013 #define SPANSION_S25FL208 0x4014 #define SPANSION_S25FL216 0x4015 /* Same as S25FL216K, but the latter supports OTP, 3 status regs, quad I/O, SFDP etc. */ +#define SPANSION_S25FL132K 0x4016 +#define SPANSION_S25FL164K 0x4017 + /* * SST25 chips are SPI, first byte of device ID is memory type, second * byte of device ID is related to log(bitsize) at least for some chips.

1 0

Flash access on ASUS F2A85 variants
by Stefan Tauner 04 May '14

04 May '14

Hello, I noticed that some F2A85 firmwares apparently block flashrom from accessing the flash correctly as noted here: http://www.coreboot.org/ASUS_F2A85-M#UEFI_builds_that_allow_flash_chip_acce… I could not find any details but the error message one receives: "ERROR: State of SpiAccessMacRomEn or SpiHostAccessRomEn prohibits full access." If I read the documentation of SpiHostAccessRomEn correctly then it should not bother us at all. It indicates it the ethernet firmware can access the host partition of the flash chip. If however the other bit (SpiAccessMacRomEn) is reset to 0 then we indeed have a problem. Can someone please send me the verbose output of flashrom to confirm which one it is? And I am also looking for testers with these boards, because I think the abort on SpiHostAccessRomEn is a bug in flashrom. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 2

[PATCH] Added SST25WF080
by jharper＠iseis.com 04 May '14

04 May '14

This patch adds support for the SST25WF080 1 Mbyte SPI flash chip. It has been very minimally tested (basically one each read/write/verify), on Windows XP with a USB Blaster as the programmer. It worked, although it was horribly slow (at least 15 minutes to program 1 MB) - but I have not otherwise used this hardware/software combination to program anything, so that might be normal. - Jason Harper ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

3 3

[commit] r1785 - trunk
by repository service 04 May '14

04 May '14

Author: stefanct Date: Sun May 4 02:55:24 2014 New Revision: 1785 URL: http://flashrom.org/trac/flashrom/changeset/1785 Log: Add support for SST25WF080. Also, refine status register prettyprinting and unlocking of the whole family. Signed-off-by: Jason Harper <jharper(a)iseis.com> Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Modified: trunk/flashchips.c trunk/flashchips.h Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Sun May 4 01:01:18 2014 (r1784) +++ trunk/flashchips.c Sun May 4 02:55:24 2014 (r1785) @@ -10040,7 +10040,8 @@ .block_erase = spi_block_erase_c7, }, }, - .unlock = spi_disable_blockprotect, + .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ + .unlock = spi_disable_blockprotect_bp2_srwd, .write = spi_aai_write, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {1650, 1950}, @@ -10074,7 +10075,8 @@ .block_erase = spi_block_erase_c7, }, }, - .unlock = spi_disable_blockprotect, + .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ + .unlock = spi_disable_blockprotect_bp2_srwd, .write = spi_aai_write, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {1650, 1950}, @@ -10111,7 +10113,8 @@ .block_erase = spi_block_erase_c7, }, }, - .unlock = spi_disable_blockprotect, + .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ + .unlock = spi_disable_blockprotect_bp2_srwd, .write = spi_aai_write, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {1650, 1950}, @@ -10148,7 +10151,46 @@ .block_erase = spi_block_erase_c7, }, }, - .unlock = spi_disable_blockprotect, + .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ + .unlock = spi_disable_blockprotect_bp2_srwd, + .write = spi_aai_write, + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {1650, 1950}, + }, + + { + .vendor = "SST", + .name = "SST25WF080", + .bustype = BUS_SPI, + .manufacture_id = SST_ID, + .model_id = SST_SST25WF080, + .total_size = 1024, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EITHER, + .tested = TEST_OK_PREW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 256} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 32} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 16} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_sst25, /* *does* have a BP3 but it is useless */ + .unlock = spi_disable_blockprotect_bp3_srwd, .write = spi_aai_write, .read = spi_chip_read, /* Fast read (0x0B) supported */ .voltage = {1650, 1950}, Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Sun May 4 01:01:18 2014 (r1784) +++ trunk/flashchips.h Sun May 4 02:55:24 2014 (r1785) @@ -575,6 +575,7 @@ #define SST_SST25WF010 0x2502 #define SST_SST25WF020 0x2503 #define SST_SST25WF040 0x2504 +#define SST_SST25WF080 0x2505 #define SST_SST25VF512A_REMS 0x48 /* REMS or RES opcode */ #define SST_SST25VF010_REMS 0x49 /* REMS or RES opcode */ #define SST_SST25VF020_REMS 0x43 /* REMS or RES opcode */

1 0

[PATCH] Added support for MX23L3254
by Michael Coppola 04 May '14

04 May '14

I've added a new definition for the Macronix MX23L3254 chip (4M). Since it is a mask ROM, it doesn't support write or erase. Let me know if the definition is incorrect in describing this. Here's the datasheet for reference: http://www.macronix.com/Lists/DataSheet/Attachments/1233/MX23L3254,%203.0-3… Probe and read works when tested on a real chip: $ ./flashrom -p buspirate_spi:dev=/dev/ttyUSB0 -r trying_again2.bin flashrom v0.9.7-r1767 on Linux 3.8.0-37-generic (x86_64) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found Macronix flash chip "MX23L3254" (4096 kB, SPI) on buspirate_spi. === This flash part has status UNTESTED for operations: ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -VE, -Vw), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Reading flash... done. Signed-off-by: Michael Coppola <michael.n.coppola(a)gmail.com>

2 3

[commit] r1784 - trunk
by repository service 04 May '14

04 May '14

Author: stefanct Date: Sun May 4 01:01:18 2014 New Revision: 1784 URL: http://flashrom.org/trac/flashrom/changeset/1784 Log: Add support for Macronix MX23L3254 mask ROM. Signed-off-by: Michael Coppola <michael.n.coppola(a)gmail.com> Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Modified: trunk/flash.h trunk/flashchips.c trunk/flashchips.h Modified: trunk/flash.h ============================================================================== --- trunk/flash.h Sat May 3 23:33:01 2014 (r1783) +++ trunk/flash.h Sun May 4 01:01:18 2014 (r1784) @@ -208,6 +208,7 @@ #define TEST_BAD_READ (1 << 5) #define TEST_BAD_ERASE (1 << 6) #define TEST_BAD_WRITE (1 << 7) +#define TEST_BAD_EW (TEST_BAD_ERASE | TEST_BAD_WRITE) #define TEST_BAD_REW (TEST_BAD_READ | TEST_BAD_ERASE | TEST_BAD_WRITE) #define TEST_BAD_PREW (TEST_BAD_PROBE | TEST_BAD_READ | TEST_BAD_ERASE | TEST_BAD_WRITE) #define TEST_BAD_MASK 0xf0 Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Sat May 3 23:33:01 2014 (r1783) +++ trunk/flashchips.c Sun May 4 01:01:18 2014 (r1784) @@ -5909,6 +5909,22 @@ { .vendor = "Macronix", + .name = "MX23L3254", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX23L3254, + .total_size = 4096, + .page_size = 256, + .tested = TEST_OK_PR | TEST_BAD_EW, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .write = NULL, /* MX23L3254 is a mask ROM, so it is read-only */ + .read = spi_chip_read, /* Fast read (0x0B) supported */ + .voltage = {3000, 3600}, + }, + + { + .vendor = "Macronix", .name = "MX25L512(E)/MX25V512(C)", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Sat May 3 23:33:01 2014 (r1783) +++ trunk/flashchips.h Sun May 4 01:01:18 2014 (r1784) @@ -423,13 +423,13 @@ #define ISSI_ID 0xD5 /* ISSI Integrated Silicon Solutions */ -/* - * MX25 chips are SPI, first byte of device ID is memory type, +#define MACRONIX_ID 0xC2 /* Macronix (MX) */ +/* Mask ROMs */ +#define MACRONIX_MX23L3254 0x0516 +/* MX25 chips are SPI, first byte of device ID is memory type, * second byte of device ID is log(bitsize)-9. * Generalplus SPI chips seem to be compatible with Macronix - * and use the same set of IDs. - */ -#define MACRONIX_ID 0xC2 /* Macronix (MX) */ + * and use the same set of IDs. */ #define MACRONIX_MX25L512 0x2010 /* Same as MX25L512E, MX25V512, MX25V512C */ #define MACRONIX_MX25L1005 0x2011 /* Same as MX25L1005C, MX25L1006E */ #define MACRONIX_MX25L2005 0x2012 /* Same as MX25L2005C */ @@ -448,6 +448,7 @@ #define MACRONIX_MX25U12835E 0x2538 /* Same as MX25U12835F */ #define MACRONIX_MX25U25635F 0x2539 #define MACRONIX_MX25L3235D 0x5E16 /* MX25L3225D/MX25L3235D/MX25L3237D */ + #define MACRONIX_MX29F001B 0x19 #define MACRONIX_MX29F001T 0x18 #define MACRONIX_MX29F002B 0x34 /* Same as MX29F002NB; N has reset pin n/c. */

1 0

[commit] r1783 - in trunk: . util
by repository service 03 May '14

03 May '14

Author: stefanct Date: Sat May 3 23:33:01 2014 New Revision: 1783 URL: http://flashrom.org/trac/flashrom/changeset/1783 Log: Add a bunch of new/tested stuff and various small changes 20. Tested mainboards: OK: - abit BX6 2.0 Reported by Stefan Tauner - Acer EM61SM/EM61PM (used in Acer Aspire T180) Reported by Benjamin Bellec - ADLINK Express-HR Reported by Obermair Thomas - ASUS M3N-H/HDMI Reported by Franc Serres - Attro G5G100-P Reported by Christoph Grenz - ASRock 960GM-GS3 FX Reported by Fuley Istvan - Elitegroup P6BAP-A+ (V2.2) Reported by Arnaldo Pirrone - Elitegroup GeForce7050M-M (V2.0) Reported by Leif Middelschulte - Fujitsu D3041-A1 (used in ESPRIMO P2560) Reported by Daggi Duck - GIGABYTE GA-8S648 Reported by TeslaBIOS - GIGABYTE GA-970A-D3P (rev. 1.0) Reported by Jean-Francois Pirus - GIGABYTE GA-B85M-D3H Reported by Mladen Milinković - GIGABYTE GA-X79-UD3 Reported by Jeff O'Neil - GIGABYTE GA-X79-UP4 (rev. 1.0) Reported by George Spelvin - GIGABYTE GA-Z68MA-D2H-B3 (rev. 1.3) Reported by Vangelis Skarmoutsos - GIGABYTE GA-Z87-HD3 Reported by virii5 - Lenovo Tilapia CRB Reported by jenkins56 on IRC - MSI GT60-2OD (notebook, only with layout patches) Reported by Vasiliy Vylegzhanin - MSI MS-6704 (845PE Max2 PCB 1.0) (Pure Version w/o raid) Reported by professorll - MSI MS-7399 1.1 (used in Acer Aspire M5640/M3640) Reported by Koen Rousseau - MSI MS-7125 (K8N Neo4(-F/FI/FX)) We had a board enable for that one for years, but it was not (and still is not) completely clear which boards are covered. - MSI MS-7522 (MSI X58 Pro-E) Reported by Gianluigi Tiesi - PCWARE APM80-D3 Reported by César Augusto Jakoby - Pegatron IPP7A-CP Reported by Илья Шипко - Supermicro H8QME-2 Reported by Greg Tippitt - Supermicro X7SPA-H Reported by Kyle Bentley - Supermicro X7SPE-HF-D525 Reported by Micah Anderson - Supermicro X8DTE Reported by Mark Nipper - Supermicro X8SIL-F Reported by Peter Samuelson - ZOTAC IONITX-A (-E) version Reported by Maciej Wroniecki NOT OK: - Supermicro X10SLM-F Reported by Micah Anderson Flash chips: - Atmel AT29C020 to PREW (+PREW) It was marked like that in the past, but I could not find the reason why the test bits were reset. Urja Rannikko tested it again and it still works. - Eon EN25F10 to PREW (+PREW) Reported by Stolmár Tamás - Eon EN25QH64 to PR (+PR) Reported by Vladimir 'φ-coder' Serbinenko - GigaDevice GD25Q32(B) to PREW (+PREW) Reported by mrnuke - Macronix MX25L512(E)/MX25V512(C) to PREW (+PREW) Reported by Jamie Nichol - Macronix MX25L2005(C) to PREW (+PREW) Reported by Давыдов Дмитрий - Micron/Numonyx/ST N25Q064..1E to PREW (+PREW) Reported by Paolo Zambotti - Pmc Pm25LD010(C) to PREW (+PREW) Reported by Vasile Ceteras - Micron/Numonyx/ST M25P16 to PREW (+EW) Reported by raven - Micron/Numonyx/ST M25PX64 to PREW (+W) Reported by Zaolin - SST SST25VF020B to PREW (+PREW) Reported by Michaël Zweers - SST SST49LF040 to PREW (+W) Reported by Oskar Enoksson - Add support for MX25L3273E (evil twin of MX25L3205 et al.) Also, add MX25L1673 and MX25L6473E to the names of their twins and add a note about MX25L8073E. - Winbond W25X32 to PREW (+REW) Reported by The Raven - Winbond W29C010 etc. to PREW (+W) Reported by san Chipsets tested OK: - Intel NM70 (8086:1e5f) Reported by mrnuke - Intel C204 (8086:1c54) Reported by Vasiliy Vylegzhanin - Intel QM67 (8086:1c4f) Reported by Obermair Thomas - Intel HM77 (8086:1e57) Reported by Vasiliy Vylegzhanin - Intel B85 (8086:8c50) Reported by Mladen Milinković - Intel HM87 (8086:8c4b) Reported by Vasiliy Vylegzhanin - Intel Z87 (8086:8c44) Reported by virii5 - NVIDIA MCP51 (10de:0261) Reported by Marcin Kościelnicki - SiS 648 (1039:0648) Reported by TeslaBIOS Miscellaneous: - Mark ARM-USB-TINY-H as tested in ft2232_spi (reported by _nanodev_). - getrevision.sh: Ignore failing date calls. - getrevision.sh: Fix -u and -l for older git versions which require = for the git log grep parameter. - Corrected K8T Neo2-F entries due to a report from Stelios Tsampas. - Add "-p internal" to output that requests users to send flashrom -V logs. - Add Macbook2,1, Thinkpad X230, EasyNote LM85 to laptop whitelist. - Tiny other stuff. Signed-off-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Acked-by: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Modified: trunk/board_enable.c trunk/chipset_enable.c trunk/cli_output.c trunk/dummyflasher.c trunk/flashchips.c trunk/flashchips.h trunk/flashrom.8.tmpl trunk/ft2232_spi.c trunk/it87spi.c trunk/print.c trunk/spi25_statusreg.c trunk/util/getrevision.sh Modified: trunk/board_enable.c ============================================================================== --- trunk/board_enable.c Fri May 2 17:41:42 2014 (r1782) +++ trunk/board_enable.c Sat May 3 23:33:01 2014 (r1783) @@ -334,7 +334,7 @@ } } msg_pinfo("Active config mode, unknown reg 0x20 ID: %02x.\n", model); - msg_pinfo("Please send the output of \"flashrom -V\" to \n" + msg_pinfo("Please send the output of \"flashrom -V -p internal\" to \n" "flashrom(a)flashrom.org with W836xx: your board name: flashrom -V\n" "as the subject to help us finish support for your Super I/O. Thanks.\n"); continue; @@ -489,7 +489,7 @@ * Winbond W83627THF: Raise GPIO 44. * * Suited for: - * - MSI K8T Neo2-F + * - MSI K8T Neo2-F V2.0 */ static int w83627thf_gpio44_raise_2e(void) { @@ -619,11 +619,9 @@ if (tmp & 0x02) { /* The data sheet contradicts itself about max size. */ max_rom_decode.parallel = 1024 * 1024; - msg_pinfo("IT8705F with very unusual settings. Please " - "send the output of \"flashrom -V\" to \n" - "flashrom(a)flashrom.org with " - "IT8705: your board name: flashrom -V\n" - "as the subject to help us finish " + msg_pinfo("IT8705F with very unusual settings.\n" + "Please send the output of \"flashrom -V -p internal\" to flashrom(a)flashrom.org\n" + "with \"IT8705: your board name: flashrom -V\" as the subject to help us finish\n" "support for your Super I/O. Thanks.\n"); ret = 1; } else if (tmp & 0x08) { @@ -1110,7 +1108,7 @@ /* * Suited for: * - Foxconn 6150K8MD-8EKRSH: Socket 939 + NVIDIA MCP51 - * - MSI K8N Neo4: NVIDIA CK804. TODO: Should probably be K8N Neo4 Platinum, see http://www.coreboot.org/pipermail/flashrom/2010-August/004362.html. + * - MSI K8N Neo4(-F/-FI/-FX/Platinum): NVIDIA CK804 * - MSI K8NGM2-L: NVIDIA MCP51 * - MSI K9N SLI: NVIDIA MCP55 */ @@ -2325,6 +2323,7 @@ {0x1022, 0x2090, 0, 0, 0x1022, 0x2080, 0, 0, NULL, "artecgroup", "dbe62", P3, "Artec Group", "DBE62", 0, OK, board_artecgroup_dbe6x}, {0x8086, 0x27b9, 0xa0a0, 0x0632, 0x8086, 0x27da, 0xa0a0, 0x0632, NULL, NULL, NULL, P3, "AOpen", "i945GMx-VFX", 0, OK, intel_ich_gpio38_raise}, {0x8086, 0x277c, 0xa0a0, 0x060b, 0x8086, 0x27da, 0xa0a0, 0x060b, NULL, NULL, NULL, P3, "AOpen", "i975Xa-YDG", 0, OK, board_aopen_i975xa_ydg}, + {0x8086, 0x27A0, 0x8086, 0x7270, 0x8086, 0x27B9, 0x8086, 0x7270, "^MacBook2,1$", NULL, NULL, P2, "Apple", "MacBook2,1", 0, OK, p2_whitelist_laptop}, {0x8086, 0x27b8, 0x1849, 0x27b8, 0x8086, 0x27da, 0x1849, 0x27da, "^ConRoeXFire-eSATA2", NULL, NULL, P3, "ASRock", "ConRoeXFire-eSATA2", 0, OK, intel_ich_gpio16_raise}, {0x1022, 0x1536, 0x1849, 0x1536, 0x1022, 0x780e, 0x1849, 0x780e, "^Kabini CRB$", NULL, NULL, P2, "ASRock", "IMB-A180(-H)", 0, OK, p2_not_a_laptop}, {0x1039, 0x0741, 0x1849, 0x0741, 0x1039, 0x5513, 0x1849, 0x5513, "^K7S41 $", NULL, NULL, P3, "ASRock", "K7S41", 0, OK, w836xx_memw_enable_2e}, @@ -2425,14 +2424,15 @@ {0x8086, 0x27a0, 0x17aa, 0x2017, 0x8086, 0x27b9, 0x17aa, 0x2009, "^ThinkPad T60", NULL, NULL, P2, "Lenovo", "T60(s)", 0, OK, p2_whitelist_laptop}, {0x8086, 0x27a0, 0x17aa, 0x2017, 0x8086, 0x27b9, 0x17aa, 0x2009, "^ThinkPad X60", NULL, NULL, P2, "Lenovo", "X60(s)", 0, OK, p2_whitelist_laptop}, {0x8086, 0x3B07, 0x17AA, 0x2166, 0x8086, 0x3B30, 0x17AA, 0x2167, "^Lenovo X201", NULL, NULL, P2, "Lenovo", "X201", 0, OK, p2_whitelist_laptop}, + {0x8086, 0x1E22, 0x17AA, 0x21FA, 0x8086, 0x1E55, 0x17AA, 0x21FA, "^ThinkPad X230", NULL, NULL, P2, "Lenovo", "X230", 0, OK, p2_whitelist_laptop}, {0x8086, 0x2411, 0x8086, 0x2411, 0x8086, 0x7125, 0x0e11, 0xb165, NULL, NULL, NULL, P3, "Mitac", "6513WU", 0, OK, board_mitac_6513wu}, {0x8086, 0x8186, 0x8086, 0x8186, 0x8086, 0x8800, 0, 0, "^MSC Vertriebs GmbH$", NULL, NULL, P2, "MSC", "Q7-TCTC", 0, OK, p2_not_a_laptop}, - {0x10DE, 0x005E, 0x1462, 0x7125, 0x10DE, 0x0052, 0x1462, 0x7125, NULL, NULL, NULL, P3, "MSI", "K8N Neo4-F", 0, OK, nvidia_mcp_gpio2_raise}, /* TODO: Should probably be K8N Neo4 Platinum, see http://www.coreboot.org/pipermail/flashrom/2010-August/004362.html. */ {0x8086, 0x7190, 0, 0, 0x8086, 0x7110, 0, 0, "^MS-6163 (i440BX)$", NULL, NULL, P3, "MSI", "MS-6163 (MS-6163 Pro)", 0, OK, intel_piix4_gpo14_raise}, + {0x8086, 0x244b, 0x1462, 0x3910, 0x8086, 0x2442, 0x1462, 0x3910, NULL, NULL, NULL, P3, "MSI", "MS-6391 (845 Pro4)", 0, OK, intel_ich_gpio23_raise}, {0x1039, 0x0745, 0, 0, 0x1039, 0x0018, 0, 0, "^MS-6561", NULL, NULL, P3, "MSI", "MS-6561 (745 Ultra)", 0, OK, w836xx_memw_enable_2e}, {0x8086, 0x2560, 0x1462, 0x5770, 0x8086, 0x2562, 0x1462, 0x5778, NULL, NULL, NULL, P3, "MSI", "MS-6577 (Xenon)", 0, OK, w83627hf_gpio25_raise_2e}, {0x13f6, 0x0111, 0x1462, 0x5900, 0x1106, 0x3177, 0x1106, 0, NULL, NULL, NULL, P3, "MSI", "MS-6590 (KT4 Ultra)", 0, OK, board_msi_kt4v}, - {0x1106, 0x3149, 0x1462, 0x7094, 0x10ec, 0x8167, 0x1462, 0x094c, NULL, NULL, NULL, P3, "MSI", "MS-6702E (K8T Neo2-F)", 0, OK, w83627thf_gpio44_raise_2e}, + {0x1106, 0x3149, 0x1462, 0x7094, 0x10ec, 0x8167, 0x1462, 0x094c, "^MS-7094$", NULL, NULL, P3, "MSI", "MS-7094 (K8T Neo2-F V2.0)", 0, OK, w83627thf_gpio44_raise_2e}, {0x1106, 0x0571, 0x1462, 0x7120, 0x1106, 0x3065, 0x1462, 0x7120, NULL, NULL, NULL, P3, "MSI", "MS-6712 (KT4V)", 0, OK, board_msi_kt4v}, {0x1106, 0x3148, 0 , 0 , 0x1106, 0x3177, 0 , 0 , NULL, "msi", "ms6787", P3, "MSI", "MS-6787 (P4MAM-V/P4MAM-L)", 0, OK, w836xx_memw_enable_2e}, {0x8086, 0x24d3, 0x1462, 0x7880, 0x8086, 0x2570, 0, 0, NULL, NULL, NULL, P3, "MSI", "MS-6788-040 (848P NeoV)", 0, OK, intel_ich_gpio32_raise}, @@ -2440,12 +2440,13 @@ {0x10DE, 0x00E0, 0x1462, 0x0250, 0x10DE, 0x00E1, 0x1462, 0x0250, NULL, NULL, NULL, P3, "MSI", "MS-7025 (K8N Neo2 Platinum)", 0, OK, nvidia_mcp_gpio0c_raise}, {0x10DE, 0x00E0, 0x1462, 0x0300, 0x10DE, 0x00E1, 0x1462, 0x0300, NULL, NULL, NULL, P3, "MSI", "MS-7030 (K8N Neo Platinum)", 0, OK, nvidia_mcp_gpio0c_raise}, {0x8086, 0x2658, 0x1462, 0x7046, 0x1106, 0x3044, 0x1462, 0x046d, NULL, NULL, NULL, P3, "MSI", "MS-7046", 0, OK, intel_ich_gpio19_raise}, - {0x8086, 0x244b, 0x1462, 0x3910, 0x8086, 0x2442, 0x1462, 0x3910, NULL, NULL, NULL, P3, "MSI", "MS-6391 (845 Pro4)", 0, OK, intel_ich_gpio23_raise}, {0x1106, 0x3149, 0x1462, 0x7061, 0x1106, 0x3227, 0, 0, NULL, NULL, NULL, P3, "MSI", "MS-7061 (KM4M-V/KM4AM-V)", 0, OK, w836xx_memw_enable_2e}, + {0x10DE, 0x005E, 0x1462, 0x7125, 0x10DE, 0x0052, 0x1462, 0x7125, NULL, NULL, NULL, P3, "MSI", "MS-7125 (K8N Neo4(-F/-FI/-FX/Platinum))", 0, OK, nvidia_mcp_gpio2_raise}, {0x10DE, 0x005E, 0x1462, 0x7135, 0x10DE, 0x0050, 0x1462, 0x7135, NULL, "msi", "k8n-neo3", P3, "MSI", "MS-7135 (K8N Neo3)", 0, OK, w83627thf_gpio44_raise_4e}, {0x10DE, 0x0270, 0x1462, 0x7207, 0x10DE, 0x0264, 0x1462, 0x7207, NULL, NULL, NULL, P3, "MSI", "MS-7207 (K8NGM2-L)", 0, NT, nvidia_mcp_gpio2_raise}, {0x10DE, 0x0360, 0x1462, 0x7250, 0x10DE, 0x0368, 0x1462, 0x7250, NULL, NULL, NULL, P3, "MSI", "MS-7250 (K9N SLI)", 0, OK, nvidia_mcp_gpio2_raise}, {0x1011, 0x0019, 0xaa55, 0xaa55, 0x8086, 0x7190, 0, 0, NULL, NULL, NULL, P3, "Nokia", "IP530", 0, OK, fdc37b787_gpio50_raise_3f0}, + {0x8086, 0x3B30, 0x1025, 0x0379, 0x8086, 0x3B09, 0x1025, 0x0379, "^EasyNote LM85$", NULL, NULL, P2, "Packard Bell","EasyNote LM85", 0, OK, p2_whitelist_laptop}, {0x8086, 0x24d3, 0x144d, 0xb025, 0x8086, 0x1050, 0x144d, 0xb025, NULL, NULL, NULL, P3, "Samsung", "Polaris 32", 0, OK, intel_ich_gpio21_raise}, {0x1106, 0x3099, 0, 0, 0x1106, 0x3074, 0, 0, NULL, "shuttle", "ak31", P3, "Shuttle", "AK31", 0, OK, w836xx_memw_enable_2e}, {0x1106, 0x3104, 0x1297, 0xa238, 0x1106, 0x3059, 0x1297, 0xc063, NULL, NULL, NULL, P3, "Shuttle", "AK38N", 256, OK, NULL}, Modified: trunk/chipset_enable.c ============================================================================== --- trunk/chipset_enable.c Fri May 2 17:41:42 2014 (r1782) +++ trunk/chipset_enable.c Sat May 3 23:33:01 2014 (r1783) @@ -982,7 +982,7 @@ /* Works for VT82C686A/B too. */ static int enable_flash_vt82c596(struct pci_dev *dev, const char *name) { - /* Enable decoding of 0xFFF80000 to 0xFFFFFFFF. (1 MB) */ + /* Enable decoding of 0xFFF00000 to 0xFFFFFFFF. (1 MB) */ max_rom_decode.parallel = 1024 * 1024; return enable_flash_amd_via(dev, name, 0xE0); } @@ -1288,11 +1288,9 @@ ret = 1; out_msg: - msg_pinfo("Please send the output of \"flashrom -V\" to " - "flashrom(a)flashrom.org with\n" - "your board name: flashrom -V as the subject to help us " - "finish support for your\n" - "chipset. Thanks.\n"); + msg_pinfo("Please send the output of \"flashrom -V -p internal\" to flashrom(a)flashrom.org\n" + "with \"your board name: flashrom -V\" as the subject to help us finish support\n" + "for your chipset. Thanks.\n"); return ret; } @@ -1388,7 +1386,7 @@ {0x1039, 0x0640, NT, "SiS", "640", enable_flash_sis540}, {0x1039, 0x0645, NT, "SiS", "645", enable_flash_sis540}, {0x1039, 0x0646, OK, "SiS", "645DX", enable_flash_sis540}, - {0x1039, 0x0648, NT, "SiS", "648", enable_flash_sis540}, + {0x1039, 0x0648, OK, "SiS", "648", enable_flash_sis540}, {0x1039, 0x0650, OK, "SiS", "650", enable_flash_sis540}, {0x1039, 0x0651, OK, "SiS", "651", enable_flash_sis540}, {0x1039, 0x0655, NT, "SiS", "655", enable_flash_sis540}, @@ -1418,7 +1416,7 @@ /* Slave, should not be here, to fix known bug for A01. */ {0x10de, 0x00d3, OK, "NVIDIA", "CK804", enable_flash_ck804}, {0x10de, 0x0260, OK, "NVIDIA", "MCP51", enable_flash_ck804}, - {0x10de, 0x0261, NT, "NVIDIA", "MCP51", enable_flash_ck804}, + {0x10de, 0x0261, OK, "NVIDIA", "MCP51", enable_flash_ck804}, {0x10de, 0x0262, NT, "NVIDIA", "MCP51", enable_flash_ck804}, {0x10de, 0x0263, NT, "NVIDIA", "MCP51", enable_flash_ck804}, {0x10de, 0x0360, OK, "NVIDIA", "MCP55", enable_flash_mcp55}, /* M57SLI*/ @@ -1490,14 +1488,14 @@ {0x8086, 0x1c4c, NT, "Intel", "Q65", enable_flash_pch6}, {0x8086, 0x1c4d, NT, "Intel", "QS67", enable_flash_pch6}, {0x8086, 0x1c4e, NT, "Intel", "Q67", enable_flash_pch6}, - {0x8086, 0x1c4f, NT, "Intel", "QM67", enable_flash_pch6}, + {0x8086, 0x1c4f, OK, "Intel", "QM67", enable_flash_pch6}, {0x8086, 0x1c50, NT, "Intel", "B65", enable_flash_pch6}, {0x8086, 0x1c52, NT, "Intel", "C202", enable_flash_pch6}, - {0x8086, 0x1c54, NT, "Intel", "C204", enable_flash_pch6}, + {0x8086, 0x1c54, OK, "Intel", "C204", enable_flash_pch6}, {0x8086, 0x1c56, NT, "Intel", "C206", enable_flash_pch6}, {0x8086, 0x1c5c, OK, "Intel", "H61", enable_flash_pch6}, - {0x8086, 0x1d40, OK, "Intel", "X79", enable_flash_pch6}, - {0x8086, 0x1d41, OK, "Intel", "X79", enable_flash_pch6}, + {0x8086, 0x1d40, OK, "Intel", "C60x/X79", enable_flash_pch6}, + {0x8086, 0x1d41, OK, "Intel", "C60x/X79", enable_flash_pch6}, {0x8086, 0x1e44, OK, "Intel", "Z77", enable_flash_pch7}, {0x8086, 0x1e46, NT, "Intel", "Z75", enable_flash_pch7}, {0x8086, 0x1e47, NT, "Intel", "Q77", enable_flash_pch7}, @@ -1507,12 +1505,12 @@ {0x8086, 0x1e53, NT, "Intel", "C216", enable_flash_pch7}, {0x8086, 0x1e55, OK, "Intel", "QM77", enable_flash_pch7}, {0x8086, 0x1e56, NT, "Intel", "QS77", enable_flash_pch7}, - {0x8086, 0x1e57, NT, "Intel", "HM77", enable_flash_pch7}, + {0x8086, 0x1e57, OK, "Intel", "HM77", enable_flash_pch7}, {0x8086, 0x1e58, NT, "Intel", "UM77", enable_flash_pch7}, {0x8086, 0x1e59, NT, "Intel", "HM76", enable_flash_pch7}, {0x8086, 0x1e5d, NT, "Intel", "HM75", enable_flash_pch7}, {0x8086, 0x1e5e, NT, "Intel", "HM70", enable_flash_pch7}, - {0x8086, 0x1e5f, NT, "Intel", "NM70", enable_flash_pch7}, + {0x8086, 0x1e5f, OK, "Intel", "NM70", enable_flash_pch7}, {0x8086, 0x2310, NT, "Intel", "DH89xxCC", enable_flash_pch7}, {0x8086, 0x2390, NT, "Intel", "Coleto Creek", enable_flash_pch7}, {0x8086, 0x2410, OK, "Intel", "ICH", enable_flash_ich0}, @@ -1580,19 +1578,19 @@ {0x8086, 0x8c41, NT, "Intel", "Lynx Point Mobile Engineering Sample", enable_flash_pch8}, {0x8086, 0x8c42, NT, "Intel", "Lynx Point Desktop Engineering Sample", enable_flash_pch8}, {0x8086, 0x8c43, NT, "Intel", "Lynx Point", enable_flash_pch8}, - {0x8086, 0x8c44, NT, "Intel", "Z87", enable_flash_pch8}, + {0x8086, 0x8c44, OK, "Intel", "Z87", enable_flash_pch8}, {0x8086, 0x8c45, NT, "Intel", "Lynx Point", enable_flash_pch8}, {0x8086, 0x8c46, NT, "Intel", "Z85", enable_flash_pch8}, {0x8086, 0x8c47, NT, "Intel", "Lynx Point", enable_flash_pch8}, {0x8086, 0x8c48, NT, "Intel", "Lynx Point", enable_flash_pch8}, {0x8086, 0x8c49, NT, "Intel", "HM86", enable_flash_pch8}, {0x8086, 0x8c4a, OK, "Intel", "H87", enable_flash_pch8}, - {0x8086, 0x8c4b, NT, "Intel", "HM87", enable_flash_pch8}, + {0x8086, 0x8c4b, OK, "Intel", "HM87", enable_flash_pch8}, {0x8086, 0x8c4c, NT, "Intel", "Q85", enable_flash_pch8}, {0x8086, 0x8c4d, NT, "Intel", "Lynx Point", enable_flash_pch8}, {0x8086, 0x8c4e, NT, "Intel", "Q87", enable_flash_pch8}, {0x8086, 0x8c4f, NT, "Intel", "QM87", enable_flash_pch8}, - {0x8086, 0x8c50, NT, "Intel", "B85", enable_flash_pch8}, + {0x8086, 0x8c50, OK, "Intel", "B85", enable_flash_pch8}, {0x8086, 0x8c51, NT, "Intel", "Lynx Point", enable_flash_pch8}, {0x8086, 0x8c52, NT, "Intel", "C222", enable_flash_pch8}, {0x8086, 0x8c53, NT, "Intel", "Lynx Point", enable_flash_pch8}, Modified: trunk/cli_output.c ============================================================================== --- trunk/cli_output.c Fri May 2 17:41:42 2014 (r1782) +++ trunk/cli_output.c Sat May 3 23:33:01 2014 (r1783) @@ -36,7 +36,7 @@ if (fclose(logfile)) { /* fclose returned an error. Stop writing to be safe. */ logfile = NULL; - msg_perr("Closing the log file returned error %s\n", strerror(errno)); + msg_gerr("Closing the log file returned error %s\n", strerror(errno)); return 1; } logfile = NULL; Modified: trunk/dummyflasher.c ============================================================================== --- trunk/dummyflasher.c Fri May 2 17:41:42 2014 (r1782) +++ trunk/dummyflasher.c Sat May 3 23:33:01 2014 (r1783) @@ -377,11 +377,14 @@ msg_pdbg("Filling fake flash chip with 0xff, size %i\n", emu_chip_size); memset(flashchip_contents, 0xff, emu_chip_size); + /* Will be freed by shutdown function if necessary. */ emu_persistent_image = extract_programmer_param("image"); if (!emu_persistent_image) { /* Nothing else to do. */ goto dummy_init_out; } + /* We will silently (in default verbosity) ignore the file if it does not exist (yet) or the size does + * not match the emulated chip. */ if (!stat(emu_persistent_image, &image_stat)) { msg_pdbg("Found persistent image %s, size %li ", emu_persistent_image, (long)image_stat.st_size); @@ -414,7 +417,7 @@ void *dummy_map(const char *descr, uintptr_t phys_addr, size_t len) { - msg_pspew("%s: Mapping %s, 0x%zx bytes at 0x%*" PRIxPTR "\n", + msg_pspew("%s: Mapping %s, 0x%zx bytes at 0x%0*" PRIxPTR "\n", __func__, descr, len, PRIxPTR_WIDTH, phys_addr); return (void *)phys_addr; } Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Fri May 2 17:41:42 2014 (r1782) +++ trunk/flashchips.c Sat May 3 23:33:01 2014 (r1783) @@ -2275,7 +2275,7 @@ .total_size = 256, .page_size = 256, .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 10000, /* 10ms */ .block_erasers = @@ -3228,7 +3228,7 @@ .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -4271,7 +4271,7 @@ /* OTP: 512B total; enter 0x3A */ /* QPI enable 0x38, disable 0xFF */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PR, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { @@ -5173,7 +5173,7 @@ .page_size = 256, /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -5917,7 +5917,7 @@ .page_size = 256, /* MX25L512E supports SFDP */ .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -5991,7 +5991,7 @@ .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -6172,7 +6172,7 @@ { .vendor = "Macronix", - .name = "MX25L1605D/MX25L1608D", + .name = "MX25L1605D/MX25L1608D/MX25L1673E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L1605, @@ -6389,6 +6389,45 @@ { .vendor = "Macronix", + .name = "MX25L3273E", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, + .model_id = MACRONIX_MX25L3205, + .total_size = 4096, + .page_size = 256, + /* OTP: 64B total; enter 0xB1, exit 0xC1 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {32 * 1024, 128} }, + .block_erase = spi_block_erase_52, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {4 * 1024 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + }, + }, + .printlock = spi_prettyprint_status_register_default_bp3, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B) and dual I/O supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Macronix", .name = "MX25L3235D", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, @@ -6497,7 +6536,7 @@ { .vendor = "Macronix", - .name = "MX25L6445E", + .name = "MX25L6445E/MX25L6473E", .bustype = BUS_SPI, .manufacture_id = MACRONIX_ID, .model_id = MACRONIX_MX25L6405, @@ -7155,7 +7194,7 @@ .total_size = 2048, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PR, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -7484,6 +7523,7 @@ .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, .read = spi_chip_read, + .voltage = {2300, 3600}, }, { @@ -7529,7 +7569,7 @@ .page_size = 256, /* OTP: 64B total; read 0x4B; write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PRE, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -7549,6 +7589,7 @@ .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: per 64kB sector lock registers */ .write = spi_chip_write_256, .read = spi_chip_read, + .voltage = {2700, 3600}, }, { @@ -7802,7 +7843,7 @@ /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -8394,7 +8435,7 @@ .total_size = 128, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -9666,7 +9707,7 @@ .total_size = 256, .page_size = 256, .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_UNTESTED, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -10766,7 +10807,7 @@ .total_size = 512, .page_size = 4096, .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PRE, + .tested = TEST_OK_PREW, .probe = probe_jedec, .probe_timing = 1, /* 150 ns */ .block_erasers = @@ -12298,7 +12339,7 @@ .total_size = 4096, .page_size = 256, .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PROBE, + .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = @@ -12374,7 +12415,7 @@ .total_size = 128, .page_size = 128, .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PRE, + .tested = TEST_OK_PREW, .probe = probe_w29ee011, .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (w29ee011.c) */ .block_erasers = Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Fri May 2 17:41:42 2014 (r1782) +++ trunk/flashchips.h Sat May 3 23:33:01 2014 (r1783) @@ -434,11 +434,11 @@ #define MACRONIX_MX25L1005 0x2011 /* Same as MX25L1005C, MX25L1006E */ #define MACRONIX_MX25L2005 0x2012 /* Same as MX25L2005C */ #define MACRONIX_MX25L4005 0x2013 /* Same as MX25L4005A, MX25L4005C */ -#define MACRONIX_MX25L8005 0x2014 /* Same as MX25V8005 */ -#define MACRONIX_MX25L1605 0x2015 /* MX25L1605 (64k 0x20); MX25L1605A/MX25L1606E (4k 0x20, 64k 0x52); MX25L1605D/MX25L1608D (4k 0x20) */ -#define MACRONIX_MX25L3205 0x2016 /* MX25L3205, MX25L3205A (64k 0x20); MX25L3205D/MX25L3208D (4k 0x20); MX25L3206E (4k 0x20, 64k 0x52) */ -#define MACRONIX_MX25L6405 0x2017 /* MX25L6405, MX25L6405D (64k 0x20); MX25L6406E/MX25L6436E (4k 0x20); MX25L6445E (4k 0x20, 64k 0x52) */ -#define MACRONIX_MX25L12805 0x2018 /* Same as MX25L12805D */ +#define MACRONIX_MX25L8005 0x2014 /* Same as MX25V8005; FIXME: MX25L8073E (4k 0x20) */ +#define MACRONIX_MX25L1605 0x2015 /* MX25L1605 (64k 0x20); MX25L1605A/MX25L1606E (4k 0x20, 64k 0x52); MX25L1605D/MX25L1608D/MX25L1673E (4k 0x20) */ +#define MACRONIX_MX25L3205 0x2016 /* MX25L3205, MX25L3205A (64k 0x20); MX25L3205D/MX25L3208D (4k 0x20); MX25L3206E (4k 0x20, 64k 0x52); MX25L3273E (4k 0x20, 32k 0x52) */ +#define MACRONIX_MX25L6405 0x2017 /* MX25L6405, MX25L6405D (64k 0x20); MX25L6406E/MX25L6436E (4k 0x20); MX25L6445E/MX25L6473E (4k 0x20, 32k 0x52) */ +#define MACRONIX_MX25L12805 0x2018 /* Same as MX25L12805D, MX25L12835F, MX25L12845E (the latter two support completely new ID commands) */ #define MACRONIX_MX25L25635F 0x2019 /* Same as MX25L25639F, but the latter seems to not support REMS */ #define MACRONIX_MX25L1635D 0x2415 #define MACRONIX_MX25L1635E 0x2515 /* MX25L1635{E} */ @@ -590,6 +590,7 @@ #define SST_SST25VF064C 0x254B #define SST_SST26VF016 0x2601 #define SST_SST26VF032 0x2602 +#define SST_SST26VF064B 0x2643 #define SST_SST27SF512 0xA4 #define SST_SST27SF010 0xA5 #define SST_SST27SF020 0xA6 Modified: trunk/flashrom.8.tmpl ============================================================================== --- trunk/flashrom.8.tmpl Fri May 2 17:41:42 2014 (r1782) +++ trunk/flashrom.8.tmpl Sat May 3 23:33:01 2014 (r1783) @@ -577,7 +577,7 @@ .sp where .B xxxx -is the name of the programmer +is the name of the programmer, .B bb is the PCI bus number, .B dd Modified: trunk/ft2232_spi.c ============================================================================== --- trunk/ft2232_spi.c Fri May 2 17:41:42 2014 (r1782) +++ trunk/ft2232_spi.c Sat May 3 23:33:01 2014 (r1783) @@ -70,7 +70,7 @@ {OLIMEX_VID, OLIMEX_ARM_OCD_PID, NT, "Olimex", "ARM-USB-OCD"}, {OLIMEX_VID, OLIMEX_ARM_TINY_PID, OK, "Olimex", "ARM-USB-TINY"}, {OLIMEX_VID, OLIMEX_ARM_OCD_H_PID, NT, "Olimex", "ARM-USB-OCD-H"}, - {OLIMEX_VID, OLIMEX_ARM_TINY_H_PID, NT, "Olimex", "ARM-USB-TINY-H"}, + {OLIMEX_VID, OLIMEX_ARM_TINY_H_PID, OK, "Olimex", "ARM-USB-TINY-H"}, {0}, }; Modified: trunk/it87spi.c ============================================================================== --- trunk/it87spi.c Fri May 2 17:41:42 2014 (r1782) +++ trunk/it87spi.c Sat May 3 23:33:01 2014 (r1783) @@ -264,9 +264,8 @@ ret |= it87spi_probe(superios[i].port); break; default: - msg_pdbg("Super I/O ID 0x%04hx is not on the list of " - "flash capable controllers.\n", - superios[i].model); + msg_pdbg2("Super I/O ID 0x%04hx is not on the list of flash-capable controllers.\n", + superios[i].model); } } return ret; Modified: trunk/print.c ============================================================================== --- trunk/print.c Fri May 2 17:41:42 2014 (r1782) +++ trunk/print.c Sat May 3 23:33:01 2014 (r1783) @@ -533,6 +533,7 @@ B("abit", "AX8", OK, NULL, NULL), B("abit", "BF6", OK, NULL, NULL), B("abit", "BM6", OK, NULL, NULL), + B("abit", "BX6 2.0", OK, NULL, NULL), B("abit", "Fatal1ty F-I90HD", OK, NULL, NULL), B("abit", "IC7", OK, NULL, NULL), B("abit", "IP35", OK, NULL, NULL), @@ -545,8 +546,10 @@ B("abit", "VA6", OK, NULL, NULL), B("abit", "VT6X4", OK, NULL, NULL), B("Acer", "V75-M", OK, NULL, "This is an OEM board used by IBM in e.g. Aptiva 2170-G"), + B("Acer", "EM61SM/EM61PM", OK, NULL, "Used in Acer Aspire T180."), B("Acorp", "6A815EPD", OK, "http://web.archive.org/web/20021206163652/www.acorp.com.tw/English/default.…", NULL), B("Acorp", "6M810C", OK, NULL, NULL), + B("ADLINK", "Express-HR", OK, "http://www.adlinktech.com/PD/web/PD_detail.php?pid=1012", NULL), B("Advantech", "PCM-5820", OK, "http://www.emacinc.com/sbc_pc_compatible/pcm_5820.htm", NULL), B("agami", "Aruma", OK, "http://web.archive.org/web/20080212111524/http://www.agami.com/site/ais-600…", NULL), B("Albatron", "PM266A Pro", OK, "http://www.albatron.com.tw/English/Product/MB/pro_detail.asp?rlink=Overview…", NULL), /* FIXME */ @@ -562,6 +565,7 @@ B("ASRock", "880G Pro3", OK, "http://www.asrock.com/mb/overview.asp?Model=880G%20Pro3", NULL), B("ASRock", "890GX Extreme3", OK, "http://www.asrock.com/mb/overview.asp?Model=890GX%20Extreme3", NULL), B("ASRock", "939A785GMH/128M", OK, "http://www.asrock.com/mb/overview.asp?Model=939A785GMH/128M", NULL), + B("ASRock", "960GM-GS3 FX", OK, "http://www.asrock.com/mb/overview.asp?Model=960GM-GS3%20FX", NULL), B("ASRock", "A330GC", OK, "http://www.asrock.com/mb/overview.asp?Model=A330GC", NULL), B("ASRock", "A770CrossFire", OK, "http://www.asrock.com/mb/overview.asp?Model=A770CrossFire", NULL), B("ASRock", "A780FullHD", OK, "http://www.asrock.com/mb/overview.asp?Model=A780FullHD", "While flashrom is working correctly, there might be problems with the firmware images themselves. Please see http://www.flashrom.org/pipermail/flashrom/2012-July/009600.html for details."), @@ -620,11 +624,11 @@ B("ASUS", "M2A-VM (HDMI)", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2AVM/", NULL), B("ASUS", "M2N32-SLI Deluxe", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2N32SLI_DeluxeWireless_Edition/", NULL), B("ASUS", "M2N68-VM", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M2N68VM/", NULL), + B("ASUS", "M2NBP-VM CSM", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NBPVM_CSM/", NULL), B("ASUS", "M2N-E", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NE/", "If the machine doesn't come up again after flashing, try resetting the NVRAM(CMOS). The MAC address of the onboard network card will change to the value stored in the new image, so backup the old address first. See http://www.flashrom.org/pipermail/flashrom/2009-November/000879.html"), B("ASUS", "M2N-E SLI", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NE_SLI/", NULL), - B("ASUS", "M2N-SLI Deluxe", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NSLI_Deluxe/", NULL), - B("ASUS", "M2NBP-VM CSM", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NBPVM_CSM/", NULL), B("ASUS", "M2NPV-VM", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NPVVM/", NULL), + B("ASUS", "M2N-SLI Deluxe", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2NSLI_Deluxe/", NULL), B("ASUS", "M2V", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2V/", NULL), B("ASUS", "M2V-MX", OK, "http://www.asus.com/Motherboards/AMD_AM2/M2VMX/", NULL), B("ASUS", "M3A", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A/", NULL), @@ -633,10 +637,11 @@ B("ASUS", "M3A78-EM", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3A78EM/", NULL), B("ASUS", "M3N78 PRO", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3N78_PRO/", NULL), B("ASUS", "M3N78-VM", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M3N78VM/", NULL), - B("ASUS", "M4A78-EM", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4A78EM/", NULL), - B("ASUS", "M4A785T-M", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TM/", NULL), + B("ASUS", "M3N-H/HDMI", OK, "http://www.asus.com/Motherboards/M3NHHDMI//", NULL), B("ASUS", "M4A785TD-M EVO", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDM_EVO/", NULL), B("ASUS", "M4A785TD-V EVO", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TDV_EVO/", NULL), + B("ASUS", "M4A785T-M", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A785TM/", NULL), + B("ASUS", "M4A78-EM", OK, "http://www.asus.com/Motherboards/AMD_AM2Plus/M4A78EM/", NULL), B("ASUS", "M4A78LT-M LE", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A78LTM_LE/", NULL), B("ASUS", "M4A79T Deluxe", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A79T_Deluxe/", NULL), B("ASUS", "M4A87TD/USB3", OK, "http://www.asus.com/Motherboards/AMD_AM3/M4A87TDUSB3/", NULL), @@ -720,7 +725,7 @@ B("ASUS", "P8B75-M LE", BAD, NULL, "Probing works (2x 8192 kB via hwseq), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8H61 PRO", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ASUS", "P8H61-M LE/USB3", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), - B("ASUS", "P8H67-M PRO", BAD, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ASUS", "P8H67-M PRO", BAD, NULL, "Probing works (Macronix MX25L3205, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), // some firmware versions apparently are not locked, see report by Marek Zakrzewski B("ASUS", "P8H77-I", OK, "http://www.asus.com/Motherboards/P8H77I/", NULL), B("ASUS", "P8H77-M", OK, "http://www.asus.com/Motherboards/P8H77M/", NULL), B("ASUS", "P8H77-V LE", OK, "http://www.asus.com/Motherboards/P8H77V_LE/", NULL), @@ -739,6 +744,7 @@ B("ASUS", "TUSL2-C", NT, "http://support.asus.com/download.aspx?SLanguage=en&p=1&s=4&m=TUSL2-C&os=&ha…", "Untested board enable."), B("ASUS", "Z8NA-D6C", OK, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8NAD6C/", NULL), B("ASUS", "Z8PE-D12", OK, "http://www.asus.com/Server_Workstation/Server_Motherboards/Z8PED12/", NULL), + B("Attro", "G5G100-P", OK, "http://www.attro.com/motherboard/G5G100-P.htm", NULL), B("Bachmann", "OT200", OK, "http://www.bachmann.info/produkte/bedien-und-beobachtungsgeraete/operator-t…", NULL), B("BCOM", "WinNET100", OK, "http://www.coreboot.org/BCOM_WINNET100", "Used in the IGEL-316 thin client."), B("Bifferos", "Bifferboard", OK, "http://bifferos.co.uk/", NULL), @@ -766,6 +772,7 @@ B("Elitegroup", "848P-A7", OK, NULL, NULL), B("Elitegroup", "GeForce6100PM-M2 (V3.0)", OK, NULL, NULL), B("Elitegroup", "GeForce6100SM-M", OK, NULL, NULL), + B("Elitegroup", "GeForce7050M-M (V2.0)", OK, "http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=865&M…", NULL), B("Elitegroup", "GF7100PVT-M3 (V1.0)", OK, NULL, NULL), B("Elitegroup", "GF8200A", OK, NULL, NULL), B("Elitegroup", "K7S5A", OK, NULL, NULL), @@ -774,6 +781,7 @@ B("Elitegroup", "K7VTA3", OK, NULL, NULL), B("Elitegroup", "P4M800PRO-M (V1.0A, V2.0)", OK, NULL, NULL), B("Elitegroup", "P4VXMS (V1.0A)", OK, NULL, NULL), + B("Elitegroup", "P6BAP-A+ (V2.2)", OK, NULL, NULL), B("Elitegroup", "P6IWP-Fe", OK, NULL, NULL), B("Elitegroup", "P6VAP-A+", OK, NULL, NULL), B("Elitegroup", "RS485M-M", OK, NULL, NULL), @@ -792,10 +800,11 @@ B("Foxconn", "A6VMX", OK, "http://www.foxconnchannel.com/ProductDetail.aspx?T=Motherboard&U=en-us00003…", NULL), B("Foxconn", "P4M800P7MA-RS2", OK, "http://www.foxconnchannel.com/ProductDetail.aspx?T=Motherboard&U=en-us00001…", NULL), B("Foxconn", "P55MX", OK, "http://www.foxconnchannel.com/ProductDetail.aspx?T=motherboard&U=en-us00004…", "Needs the MFG jumper to be set correctly before flashing to enable the Flash Descriptor Override Strap."), - B("Freetech", "P6F91i", OK, "http://web.archive.org/web/20010417035034/http://www.freetech.com/prod/P6F9…", NULL), B("Foxconn", "Q45M", BAD, "http://www.foxconnchannel.com/ProductDetail.aspx?T=Motherboard&U=en-us00005…", "Probing works (Hardware sequencing, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked."), - B("Fujitsu-Siemens", "ESPRIMO P5915", OK, "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/professionalpc/ESPRI…", "Mainboard model is D2312-A2."), + B("Freetech", "P6F91i", OK, "http://web.archive.org/web/20010417035034/http://www.freetech.com/prod/P6F9…", NULL), + B("Fujitsu", "D3041-A1", OK, NULL, "Used in ESPRIMO P2560, contains an Atmel AT26DF081A."), B("Fujitsu-Siemens", "CELSIUS W410", BAD, "ftp://ftp.ts.fujitsu.com/pub/mainboard-oem-sales/Products/Mainboards/Indust…", "Mainboard model is D3062-A1. Probing works (Macronix MX25L6405, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME is locked."), + B("Fujitsu-Siemens", "ESPRIMO P5915", OK, "http://uk.ts.fujitsu.com/rl/servicesupport/techsupport/professionalpc/ESPRI…", "Mainboard model is D2312-A2."), B("GIGABYTE", "GA-2761GXDK", OK, "http://www.computerbase.de/news/hardware/mainboards/amd-systeme/2007/mai/gi…", NULL), B("GIGABYTE", "GA-6BXC", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1445", NULL), B("GIGABYTE", "GA-6BXDU", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1429", NULL), @@ -811,22 +820,25 @@ B("GIGABYTE", "GA-8IP775", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1830", NULL), B("GIGABYTE", "GA-8IRML", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1343", NULL), B("GIGABYTE", "GA-8PE667 Ultra 2", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1607", NULL), + B("GIGABYTE", "GA-8S648", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1674", NULL), B("GIGABYTE", "GA-8SIMLH", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1399", NULL), B("GIGABYTE", "GA-945PL-S3P (rev. 6.6)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2541", NULL), B("GIGABYTE", "GA-965GM-S2 (rev. 2.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2617", NULL), B("GIGABYTE", "GA-965P-DS4", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2288", NULL), + B("GIGABYTE", "GA-970A-D3P (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=4642", NULL), B("GIGABYTE", "GA-A75M-UD2H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3928", NULL), + B("GIGABYTE", "GA-B85M-D3H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=4567", NULL), B("GIGABYTE", "GA-EP31-DS3L (rev. 2.1)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2964", NULL), B("GIGABYTE", "GA-EP35-DS3L", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2778", NULL), + B("GIGABYTE", "GA-EX58-UD4P", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2986", NULL), B("GIGABYTE", "GA-G41MT-S2PT", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3960", NULL), B("GIGABYTE", "GA-H61M-D2-B3", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3773", NULL), B("GIGABYTE", "GA-H61M-D2H-USB3", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=4004", NULL), B("GIGABYTE", "GA-H77-D3H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=4141", "Does only work with -p internal:ich_spi_mode=hwseq due to an evil twin of MX25L6405 and ICH SPI lockdown."), B("GIGABYTE", "GA-H77M-D3H", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=4388", NULL), - B("GIGABYTE", "GA-EX58-UD4P", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2986", NULL), - B("GIGABYTE", "GA-K8N-SLI", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1928", NULL), - B("GIGABYTE", "GA-K8N51GMF", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1950", NULL), B("GIGABYTE", "GA-K8N51GMF-9", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1939", NULL), + B("GIGABYTE", "GA-K8N51GMF", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1950", NULL), + B("GIGABYTE", "GA-K8N-SLI", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=1928", NULL), B("GIGABYTE", "GA-K8NS Pro-939", NT, "http://www.gigabyte.com/products/product-page.aspx?pid=1875", "Untested board enable."), B("GIGABYTE", "GA-M57SLI-S4", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2287", NULL), B("GIGABYTE", "GA-M61P-S3", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=2434", NULL), @@ -848,10 +860,14 @@ B("GIGABYTE", "GA-P67A-UD3P", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3649", NULL), B("GIGABYTE", "GA-X58A-UD3R (rev. 2.0)", OK, NULL, NULL), B("GIGABYTE", "GA-X58A-UD7 (rev. 2.0)", OK, NULL, NULL), - B("GIGABYTE", "GA-X79-UD5", OK, NULL, NULL), + B("GIGABYTE", "GA-X79-UD5", OK, NULL, NULL), + B("GIGABYTE", "GA-X79-UD3", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=4050", "Contains a Macronix MX25L6406E."), + B("GIGABYTE", "GA-X79-UP4 (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=4288", NULL), + B("GIGABYTE", "GA-Z68MA-D2H-B3 (rev. 1.3)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3975", NULL), B("GIGABYTE", "GA-Z68MX-UD2H-B (rev. 1.3)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3854", NULL), B("GIGABYTE", "GA-Z68XP-UD3 (rev. 1.0)", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=3892", NULL), B("GIGABYTE", "GA-Z77MX-D3H", BAD, "http://www.gigabyte.com/products/product-page.aspx?pid=4145", "Uses MX25L6436E and requires a small patch (but works flawlessly with that)."), + B("GIGABYTE", "GA-Z87-HD3", OK, "http://www.gigabyte.com/products/product-page.aspx?pid=4489", NULL), B("HP", "8100 Elite CMT PC (304Bh)", BAD, NULL, "SPI lock down, PR, read-only descriptor, locked ME region."), B("HP", "e-Vectra P2706T", OK, "http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&pro…", NULL), B("HP", "Evans-GL6 (Pegatron IPMEL-AE)", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c019…", "Found in HP Pavilion Slimline s5220f."), @@ -893,6 +909,7 @@ B("Jetway", "J7F4K1G5D-PB", OK, "http://www.jetway.com.tw/jw/ipcboard_view.asp?productid=282&proname=J7F4K1G…", NULL), B("Kontron", "986LCD-M", OK, "http://de.kontron.com/products/boards+and+mezzanines/embedded+motherboards/…", NULL), B("Lanner", "EM-8510C", OK, NULL, NULL), + B("Lenovo", "Tilapia CRB", OK, NULL, "Used in ThinkCentre M75e."), B("Lex", "CV700A", OK, "http://www.lex.com.tw/product/CV700A-spec.htm", NULL), B("Mitac", "6513WU", OK, "http://web.archive.org/web/20050313054828/http://www.mitac.com/micweb/produ…", NULL), B("MSC", "Q7-TCTC", OK, "http://www.msc-ge.com/en/produkte/com/moduls/overview/5779-www.html", NULL), @@ -907,7 +924,8 @@ B("MSI", "MS-6570 (K7N2)", OK, "http://www.msi.com/product/mb/K7N2.html", NULL), B("MSI", "MS-6577 (Xenon)", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?product=90390&lc=en&cc=us&dlc=e…", "This is an OEM board from HP, the HP name is Xenon."), B("MSI", "MS-6590 (KT4 Ultra)", OK, "http://www.msi.com/product/mb/KT4-Ultra.html", NULL), - B("MSI", "MS-6702E (K8T Neo2-F)",OK, "http://www.msi.com/product/mb/K8T-Neo2-F--FIR.html", NULL), + //B("MSI", "MS-6702E (K8T Neo2-F/FIR)",OK, "http://www.msi.com/product/mb/K8T-Neo2-F--FIR.html", NULL), This was wrongly attributed to the MS-7094 board enable. + B("MSI", "MS-6704 (845PE Max2 PCB 1.0)", OK, "http://www.msi.com/product/mb/845PE-Max2.html", "Write protection must be disabled in the BIOS setup."), B("MSI", "MS-6712 (KT4V)", OK, "http://www.msi.com/product/mb/KT4V---KT4V-L--v1-0-.html", NULL), B("MSI", "MS-6787 (P4MAM-V/P4MAM-L)", OK, "http://www.msi.com/service/search/?kw=6787&type=product", NULL), B("MSI", "MS-7005 (651M-L)", OK, "http://www.msi.com/product/mb/651M-L.html", NULL), @@ -916,6 +934,8 @@ B("MSI", "MS-7046", OK, "http://www.heimir.de/ms7046/", NULL), B("MSI", "MS-7061 (KM4M-V/KM4AM-V)", OK, "http://www.msi.com/service/search/?kw=7061&type=product", NULL), B("MSI", "MS-7065", OK, "http://browse.geekbench.ca/geekbench2/view/53114", NULL), + B("MSI", "MS-7094 (K8T Neo2-F V2.0)",OK, "http://www.msi.com/product/mb/K8T_Neo2F_V2.0.html", NULL), + B("MSI", "MS-7125 (K8N Neo4(-F/-FI/-FX/Platinum))", OK, "http://www.msi.com/product/mb/K8N_Neo4_Platinum_PCB_1.0.html", NULL), B("MSI", "MS-7135 (K8N Neo3)", OK, "http://www.msi.com/product/mb/K8N-Neo3.html", NULL), B("MSI", "MS-7142 (K8MM-V)", OK, "http://www.msi.com/product/mb/K8MM-V.html", NULL), B("MSI", "MS-7168 (Orion)", OK, "http://support.packardbell.co.uk/uk/item/index.php?i=spec_orion&pi=platform…", NULL), @@ -935,6 +955,8 @@ B("MSI", "MS-7369 (K9N Neo V2)", OK, "http://www.msi.com/product/mb/K9N-Neo-V2.html", NULL), B("MSI", "MS-7376 (K9A2 Platinum V1)", OK, "http://www.msi.com/product/mb/K9A2-Platinum.html", NULL), B("MSI", "MS-7379 (G31M)", OK, "http://www.msi.com/product/mb/G31M.html", NULL), + B("MSI", "MS-7399 1.1 (Persian)", OK, "http://acersupport.com/acerpanam/desktop/0000/Acer/AspireM5640/AspireM5640s…", "This is an OEM board used by Acer in e.g. Aspire M5640/M3640."), + B("MSI", "MS-7522 (MSI X58 Pro-E)", OK, "http://www.msi.com/product/mb/X58_ProE.html", NULL), B("MSI", "MS-7529 (G31M3-L(S) V2)", OK, "http://www.msi.com/product/mb/G31M3-L-V2---G31M3-LS-V2.html", NULL), B("MSI", "MS-7529 (G31TM-P21)", OK, "http://www.msi.com/product/mb/G31TM-P21.html", NULL), B("MSI", "MS-7548 (Aspen-GL8E)", OK, "http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01635688&lc=en&cc=us&d…", NULL), @@ -968,6 +990,8 @@ B("PC Engines", "Alix.3d3", OK, "http://pcengines.ch/alix3d3.htm", NULL), B("PC Engines", "Alix.6f2", OK, "http://pcengines.ch/alix6f2.htm", NULL), B("PC Engines", "WRAP.2E", OK, "http://pcengines.ch/wrap2e1.htm", NULL), + B("PCWARE", "APM80-D3", OK, "http://www.pcwarebr.com.br/produtos_mb_apm80-d3.php", "Probably manufactured by ASUS"), + B("Pegatron", "IPP7A-CP", OK, NULL, NULL), B("Portwell", "PEB-4700VLA", OK, "http://www.portwell.com/products/detail.asp?CUSTCHAR1=PEB-4700VLA", NULL), B("RCA", "RM4100", OK, "http://www.settoplinux.org/index.php?title=RCA_RM4100", NULL), B("Samsung", "Polaris 32", OK, NULL, NULL), @@ -992,10 +1016,14 @@ B("Sun", "Fire x4600", BAD, "http://www.sun.com/servers/x64/x4600/", "No public report found. May work now."), B("Sun", "Ultra 40 M2", OK, "http://download.oracle.com/docs/cd/E19127-01/ultra40.ws/820-0123-13/intro.h…", NULL), B("Supermicro", "H8QC8", OK, "http://www.supermicro.com/Aplus/motherboard/Opteron/nforce/H8QC8.cfm", NULL), + B("Supermicro", "H8QME-2", OK, "http://www.supermicro.com/Aplus/motherboard/Opteron8000/MCP55/H8QME-2.cfm", NULL), + B("Supermicro", "X10SLM-F", BAD, "http://www.supermicro.com/products/motherboard/Xeon/C220/X10SLM-F.cfm", "Probing works (Winbond W25Q128, 16384 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked; SMM protection enabled."), B("Supermicro", "X5DP8-G2", OK, "http://www.supermicro.com/products/motherboard/Xeon/E7501/X5DP8-G2.cfm", NULL), B("Supermicro", "X7DBT-INF", OK, "http://www.supermicro.com/products/motherboard/Xeon1333/5000P/X7DBT-INF.cfm", NULL), - B("Supermicro", "X7SPA-HF", OK, "http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPA.cfm?typ=H&IP…", NULL), + B("Supermicro", "X7SPA-H(F)", OK, "http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPA.cfm?typ=H", NULL), + B("Supermicro", "X7SPE-HF-D525", OK, "http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPE-HF-D525.cfm", NULL), B("Supermicro", "X8DT3", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT3.cfm", NULL), + B("Supermicro", "X8DT6-F", OK, "http://www.supermicro.nl/products/motherboard/QPI/5500/X8DT6-F.cfm?IPMI=Y&S…", NULL), B("Supermicro", "X8DTE-F", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DT6-F.cfm?IPMI=Y&…", NULL), B("Supermicro", "X8DTG-D", OK, "http://www.supermicro.com/products/motherboard/qpi/5500/x8dtg-df.cfm", NULL), B("Supermicro", "X8DTH-6F", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTH-6F.cfm", NULL), @@ -1005,6 +1033,7 @@ B("Supermicro", "X8DTU-F", OK, "http://www.supermicro.com/products/motherboard/QPI/5500/X8DTU-F.cfm", NULL), B("Supermicro", "X8SAX", OK, "http://www.supermicro.com/products/motherboard/xeon3000/x58/x8sax.cfm", NULL), B("Supermicro", "X8SIE(-F)", BAD, "http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIE.cfm?IPMI…", "Requires unlocking the ME although the registers are set up correctly by the descriptor/BIOS already (tested with swseq and hwseq)."), + B("Supermicro", "X8SIL-F", OK, "http://www.supermicro.com/products/motherboard/Xeon3000/3400/X8SIL.cfm", NULL), B("Supermicro", "X8STi", OK, "http://www.supermicro.com/products/motherboard/Xeon3000/X58/X8STi.cfm", NULL), B("Supermicro", "X9DR3-F", BAD, "http://www.supermicro.com/products/motherboard/xeon/c600/x9dr3-f.cfm", "Probing works (Numonyx N25Q128 (supported by SFDP only atm), 16384 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("Supermicro", "X9DRD-7LN4F", BAD, "http://www.supermicro.com/products/motherboard/xeon/c600/x9drd-7ln4f.cfm", "Probing works (Numonyx N25Q128 (supported by SFDP only atm), 16384 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), @@ -1070,6 +1099,7 @@ B("ZOTAC", "GeForce 8200", OK, NULL, NULL), B("ZOTAC", "H61-ITX WiFi (H61ITX-A-E)", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), B("ZOTAC", "H67-ITX WiFi (H67ITX-C-E)", BAD, NULL, "Probing works (Winbond W25Q32, 4096 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs), ME region is locked."), + B("ZOTAC", "IONITX-A", OK, NULL, NULL), B("ZOTAC", "nForce 630i Supreme (N73U-Supreme)", OK, NULL, NULL), B("ZOTAC", "ZBOX AD02 (PLUS)", OK, NULL, NULL), B("ZOTAC", "ZBOX HD-ID11", OK, NULL, NULL), @@ -1101,6 +1131,7 @@ B("IBM/Lenovo", "Thinkpad X1", BAD, "http://www.thinkwiki.org/wiki/Category:X1", "Probing works (ST M25PX64, 8192 kB, SPI), but parts of the flash are problematic: descriptor is r/o (conforming to ICH reqs) and ME is locked. Also, a Protected Range is locking the top range of the BIOS region (presumably the boot block)."), B("IBM/Lenovo", "240", BAD, "http://www.stanford.edu/~bresnan//tp240.html", "Seems to (partially) work at first, but one block/sector cannot be written which then leaves you with a bricked laptop. Maybe this can be investigated and fixed in software later."), B("Lenovo", "3000 V100 TF05Cxx", OK, "http://www5.pc.ibm.com/europe/products.nsf/products?openagent&brand=Lenovo3…", NULL), + //B("MSI", "GT60-2OD", OK, "http://www.msi.com/product/nb/GT60_2OD.html", NULL), requires layout patches #endif {0}, Modified: trunk/spi25_statusreg.c ============================================================================== --- trunk/spi25_statusreg.c Fri May 2 17:41:42 2014 (r1782) +++ trunk/spi25_statusreg.c Sat May 3 23:33:01 2014 (r1783) @@ -640,7 +640,7 @@ int spi_prettyprint_status_register_bp2_ep_srwd(struct flashctx *flash) { uint8_t status = spi_read_status_register(flash); - msg_cdbg("Chip status register is 0x%02x\n", status); + spi_prettyprint_status_register_hex(status); spi_prettyprint_status_register_srwd(status); msg_cdbg("Chip status register: Program Fail Flag (P_FAIL) is %sset\n", Modified: trunk/util/getrevision.sh ============================================================================== --- trunk/util/getrevision.sh Fri May 2 17:41:42 2014 (r1782) +++ trunk/util/getrevision.sh Sat May 3 23:33:01 2014 (r1783) @@ -173,7 +173,7 @@ elif git_is_file_tracked "$1" ; then r=$(git_last_commit "$1") - local svn_base=$(git log --grep git-svn-id -1 --format='%h') + local svn_base=$(git log --grep=git-svn-id -1 --format='%h') if [ "$svn_base" != "" ] ; then local diff_to_svn=$(git rev-list --count ${svn_base}..${r}) if [ "$diff_to_svn" -gt 0 ] ; then @@ -204,7 +204,7 @@ # If this is a "native" git-svn clone we could use git svn log: # git svn log --oneline -1 | sed 's/^r//;s/[[:blank:]].*//' or even git svn find-rev # but it is easier to just grep for the git-svn-id unconditionally - r=$(git log --grep git-svn-id -1 -- "$1" | \ + r=$(git log --grep=git-svn-id -1 -- "$1" | \ grep git-svn-id | \ sed 's/.*@/r/;s/[[:blank:]].*//') fi @@ -247,7 +247,7 @@ local query_path= local action= - # The is the main loop + # Argument parser loop while [ $# -gt 0 ]; do case ${1} in @@ -286,7 +286,7 @@ fi query_path=$1 else - echo "Warning: Ignoring over-abundant paramter: \"${1}\"">&2 + echo "Warning: Ignoring overabundant parameter: \"${1}\"">&2 fi shift;; esac;

1 0

Re: [flashrom] W836xx : HP Z820 : flashrom -V
by Stefan Tauner 03 May '14

03 May '14

On Sat, 3 May 2014 14:02:17 -0700 Roberto <roberto(a)godenis.com> wrote: > Timely email, succesfully used buspirate just two days ago. Still > struggling though because you lose the Intel ME/ATM functions. The code for > the ME co-resides with the BIOS code in the flash. But the rest works fine. > Those functions must be signed with the certificate being stored elsewhere. It does but probably in the 0x00005000-0x0050ffff range as written in the flash descriptor (and shown by flashrom). This is pretty much self-contained and should remain in a working condition if you leave it alone and just tamper with the BIOS region. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

2 1

Re: [flashrom] W836xx : HP Z820 : flashrom -V
by Roberto Denis 03 May '14

03 May '14

iwer, stefacnt: Thanks for your IRC help a couple days ago. I have been partially successful in using the ROM layout file (-l) feature in flashrom to segment the writes to the flash in my HP Z820 workstation. It evident the HP Z820 flash has two ‘regions’: that below 0x510000 and that 0x510000 and above. The lower portion contains the coding for the Intel AMT/ME features and other data. The attached lower.txt file is log of the successful write flash addresses below 0x510000. But writing to the space above 0x510000 is still a problem. In that space I tried writing just to the bootblock area (which is all I am seeking to update in this flash) and while flashrom tags it initially as read/write, the write fails. See the attached upper.txt logfile. I did attempt writing to the entire upper section (not just the bootblock) and got the same results. The flash is hardware write enabled or I could not have written to the area below 0x510000. It seems something else seems needs enabling. Any thoughts would be helpful. Thanks again ... Roberto

3 2

Sector unprotect@AT25DF081A
by Márton Miklós 03 May '14

03 May '14

Hello flashrom developers! I am currently hacking flashrom support for a National Instrments USB-8451 USB-SPI converter. I have found an AT25DF081A in the drawer to be used as a medical rabbit for my experiments. Probing, reading works fine, but the chip is sector protected. The flashrom tries to disable the protection with clearing the 7th bit (SPRL) in the status register, but as the datasheet states: / / /As a safeguard against accidental or erroneous locking or unlocking of sectors, the Sector Protection Registers can themselves be locked from updates by using the SPRL (Sector Protection Registers Locked) bit of the Status Register (refer to "Status Register Commands" on page 16 for more details). If the Sector Protection Registers are locked, then any attempts to issue the Unprotect Sector command will be ignored, and the device will reset the WEL bit in the Status////Register back to a logical "0" and return to the idle state once the CS pin has been deasserted.// / So to unlock my flash I would have to walk through the sectors and issue an Unprotect sector command with the sector's address. My problem is that the erase blocks addresses and the sector addresses are different things. In my case it has 64Kbyte block feature and the sectors are 64Kbyte, but it also has 4KByte block feature too. What would you recommend how to implement the sector unlocking mode? My proposal is the following: - Add a sector describing structure to the flashchip structure. It would contain the sector count and sector size. - Create a new unlock method: spi_disable_blockprotect_at2x_sector_unprotect for e.g. which clears the SPRL, then (if SWP is not 0) loops through the sectors and unlock them. - If we want to be nice after the write we can reprotect the device. Please let me know your opinion on this topic! Thanks! -- Üdvözlettel, Márton Miklós

2 1

Compatibility with ECS Socket AM2+
by Leif Middelschulte 03 May '14

03 May '14

Hi, firstofall thanks for your effort with flashrom. It’s really great to be able to flash a bios image independently of Windows. Sorry I didn’t catch the entire/verbose output. Nevertheless I could successfully flash a vendor bios for the following Motherboard: http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=865&M… Regards, Leif

3 2

Is there a sure-fire way to reset any BIOS flash image to its default, out-of-the-box state with no special equipment?
by linx255＠nym.hush.com 03 May '14

03 May '14

Hi, I am seeking an answer to an apparently obscure question. If I install coreboot on my BIOS (UEFI motherboard) and the computer fails to boot, can I reset the BIOS flash to its default image? I've read about possibly changing jumper positions or removing the BIOS battery, but I can't seem to establish if these are sure-fire ways of restoring the original BIOS flash image. I'd like to attempt to install coreboot on a motherboard that doesn't appear to be coreboot-supported, but only if I know I can completely undo this. Is the default BIOS flash image preserved somewhere on a ROM chip or can it only be restored with special equipment? I definitely do not want to end up with an unusable machine. Thanks! Jim

3 3

Erase/write Bios failed on my computer, need some help plz
by Alex Moracchini 03 May '14

03 May '14

Hello Flahsrom staff ! I have a problem with my stuff and flashrom. I want upgrade my Bios version but the erase/write function of flashrom has failed. I use “ASUS P5N32-SLI SE Deluxe” motherboard ( Bios version 0801 ) and i would install this new Bios version : http://fr.driverscollection.com/_440158660264bb85a1400351c90/T%C3%A9l%C3%A9… First operation : # flashrom -p internal flashrom v0.9.7-r1711 on FreeBSD 10.0-RELEASE (i386) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "NVIDIA CK804". Enabling flash write... OK. Found SST flash chip "SST49LF080A" (1024 kB, LPC) at physical address 0xfff00000 . No operations were specified. Second operation : # flashrom -p internal -w P5N32-SLI-SE-ASUS-Deluxe-0901.ROM flashrom v0.9.7-r1711 on FreeBSD 10.0-RELEASE (i386) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Found chipset "NVIDIA CK804". Enabling flash write... OK. Found SST flash chip "SST49LF080A" (1024 kB, LPC) at physical address 0xfff00000. Reading old flash chip contents... done. Erasing and writing flash chip... writing sector at 0x28c35200 failed! Reading current flash chip contents... done. FAILED at 0x0003c308! Expected=0xff, Found=0x48, failed byte count from 0x00030000-0x0003ffff: 0x3ca7 ERASE FAILED! FAILED! Have you an idea for fix this problem ? Thanks in advance ! Regards. Alex Johnson

3 3

[PATCH] Add support for nforce1 chipset flash enable
by Marcin Kościelnicki 03 May '14

03 May '14

Signed-Off-By: Marcin Kościelnicki <koriakin(a)0x04.net> Index: chipset_enable.c =================================================================== --- chipset_enable.c (revision 1764) +++ chipset_enable.c (working copy) @@ -1075,6 +1075,15 @@ return 0; } +static int enable_flash_nvidia_nforce(struct pci_dev *dev, const char *name) +{ + rpci_write_byte(dev, 0x7a, 0); + if (enable_flash_nvidia_common(dev, name)) + return ERROR_NONFATAL; + else + return 0; +} + static int enable_flash_nvidia_nforce2(struct pci_dev *dev, const char *name) { rpci_write_byte(dev, 0x92, 0); @@ -1417,6 +1426,7 @@ {0x10de, 0x00e0, OK, "NVIDIA", "NForce3", enable_flash_nvidia_nforce2}, /* Slave, should not be here, to fix known bug for A01. */ {0x10de, 0x00d3, OK, "NVIDIA", "CK804", enable_flash_ck804}, + {0x10de, 0x01b2, OK, "NVIDIA", "NForce", enable_flash_nvidia_nforce}, {0x10de, 0x0260, OK, "NVIDIA", "MCP51", enable_flash_ck804}, {0x10de, 0x0261, NT, "NVIDIA", "MCP51", enable_flash_ck804}, {0x10de, 0x0262, NT, "NVIDIA", "MCP51", enable_flash_ck804},

3 2

AN-M2HD(MCP68): flashrom -V
by Vinarz Balázs 03 May '14

03 May '14

Dear Developer! Heres the outputs of the Abit AN-M2HD board. I cant wrote the Winbod chip. xubuntu@xubuntu:~/Desktop$ sudo flashrom -p internal -Eflashrom v0.9.6.1-r1563 on Linux 3.13.0-8-generic (x86_64)flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK.Found chipset "NVIDIA MCP67". Enabling flash write... This chipset is not really supported yet. Guesswork...Please send the output of "flashrom -V" to flashrom(a)flashrom.org withyour board name: flashrom -V as the subject to help us finish support for yourchipset. Thanks.OK.Found Winbond flash chip "W39V040B" (512 kB, LPC) at physical address 0xfff80000.Erasing and writing flash chip... Erase/write done.xubuntu@xubuntu:~/Desktop$ sudo flashrom -p internal -w JN.BIN flashrom v0.9.6.1-r1563 on Linux 3.13.0-8-generic (x86_64)flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK.Found chipset "NVIDIA MCP67". Enabling flash write... This ch ipset is not really supported yet. Guesswork...Please send the output of "flashrom -V" to flashrom(a)flashrom.org withyour board name: flashrom -V as the subject to help us finish support for yourchipset. Thanks.OK.Found Winbond flash chip "W39V040B" (512 kB, LPC) at physical address 0xfff80000.Flash image seems to be a legacy BIOS. Disabling coreboot-related checks.Reading old flash chip contents... done.Erasing and writing flash chip... writing sector at 0x7fd89382a000 failed!Reading current flash chip contents... done. writing sector at 0x7fd89382a000 failed!FAILED!Uh oh. Erase/write failed. Checking if anything changed.Good. It seems nothing was changed.Writing to the flash chip apparently didn't do anything.This means we have to add special support for your board, programmer or flash chip.Please report this on IRC at irc.freenode.net (channel #flashrom) ormail flashrom@flashrom.org!-------------------------------------------------------------------------------You may now re boot or simply leave the machine running.xub! untu@xubuntu:~/Desktop$ sudo flashrom -p internal -Vflashrom v0.9.6.1-r1563 on Linux 3.13.0-8-generic (x86_64)flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.9, GCC 4.7.1, little endianCommand line (3 args): flashrom -p internal -VCalibrating delay loop... OS timer resolution is 1 usecs, 388M loops per second, delay more than 10% too short (got 65% of expected delay), recalculating... 494M loops per second, delay more than 10% too short (got 84% of expected delay), recalculating... 509M loops per second, delay more than 10% too short (got 86% of expected delay), recalculating... 457M loops per second, delay more than 10% too short (got 77% of expected delay), recalculating... 511M loops per second, delay loop is unreliable, trying to continue 10 myus = 9 us, 100 myus = 86 us, 1000 myus = 852 us, 10000 myus = 8542 us, 4 myus = 5 us, OK.Initializing internal programmerNo coreboot table found.DMI string system-manufacturer: " ."DMI string system-product-name: "."DMI string system-version: "Unknow"DMI string baseboard-manufacturer: "http://www.abit.com.tw/"DMI string baseboard-product-name: "AN-M2HD(MCP68)"DMI string baseboard-version: "1.x "DMI string chassis-type: "Desktop"Found chipset "NVIDIA MCP67" with PCI ID 10de:0548. Enabling flash write... This chipset is not really supported yet. Guesswork...ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0Flash bus type is LPCFound SMBus device 10de:0542 at 00:01:1MCP SPI BAR is at 0xfec80000Strange. MCP SPI BAR is valid, but chipset apparently doesn't have SPI enabled.Please send the output of "flashrom -V" to flashrom(a)flashrom.org withyour board name: flashrom -V as the subject to help us finish support for yourchipset. Thanks.OK.The following protocols are supported: LPC.Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xda, id2 0x54Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content! Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xda, id2 0x54Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xda, id2 0x54Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0xda, id2 0x54Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0xda, id2 0x54Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xda, id2 0x54Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xda, id2 0x54Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash contentProbing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash contentProbing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash contentProbing for ST M50FLW040B, 5 12 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash contentProbing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash contentProbing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash contentProbing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash contentProbing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xda, id2 0x54Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xda, id2 0x54Found Winbond flash chip "W39V040B" (512 kB, LPC) at physical address 0xfff80000.Lockout bits:Hardware bootblock locking (#TBL) is active.Hardware remaining chip locking (#WP) is active..Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xda, id2 0x54Probing for Winb ond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, ! id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash contentProbing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xda, id2 0x54Found Winbond flash chip "W39V040B" (512 kB, LPC).No operations were specified.Restoring PCI config space for 00:01:0 reg 0x6dRestoring PCI config space for 00:01:0 reg 0x90Restoring PCI config space for 00:01:0 reg 0x8cRestoring PCI config space for 00:01:0 reg 0x88xubuntu@xubuntu:~/Desktop$ Thans

2 1

Support for MX25L12835F
by Tony Li 03 May '14

03 May '14

Hi, Has anyone done support for an MX25L12835F? Thanks, Tony

2 5

Re: [flashrom] Flashrom work with motherboard ASUS M3N-H/HDMI
by Stefan Tauner 03 May '14

03 May '14

On Wed, 5 Mar 2014 13:57:17 +0100 Franc SERRES <sefran007(a)gmail.com> wrote: > Hi > > I'm correctly flashing my motherboard ASUS M3N-H/HDMI for upgrading to a > new official ASUS BIOS under Kubuntu 13.10. > > I join a tar.gz file with all results of manipulations how it's ask by this > software. > > Thank's for your great Jobs guy > Hello Franc, thanks for your report! I have added your board to our list of supported hardware and will commit that later together with other small changes. Please don't send firmware images to the list in the future. They are copyrighted... Also you might be interesting in the -o switch that creates a verbose log file (as alternative to redirecting stdout and stderr with > stuff). -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

[PATCH] Support for S25FL164K/S25FL132K
by Nikolay Martynov 03 May '14

03 May '14

* Updated according to manufacturers datasheet (to the best of my abilities to read it) * Tested with actual S25FL164K via arduino spi Signed-off-by: Nikolay Martynov <mar.kolya(a)gmail.com> --- flashchips.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ flashchips.h | 3 +++ 2 files changed, 75 insertions(+) diff --git a/flashchips.c b/flashchips.c index a6db11e..3347e4e 100644 --- a/flashchips.c +++ b/flashchips.c @@ -9451,6 +9451,78 @@ const struct flashchip flashchips[] = { { .vendor = "Spansion", + .name = "S25FL132K", + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL132K, + .total_size = 4096, + .page_size = 256, + /* OTP: 1024B total, 256B reserved; read 0x48; write + * 0x42, erase 0x44 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 1024} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 64} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 4096 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 4096 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp3, + .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", + .name = "S25FL164K", + .bustype = BUS_SPI, + .manufacture_id = SPANSION_ID, + .model_id = SPANSION_S25FL164K, + .total_size = 8192, + .page_size = 256, + /* OTP: 1024B total, 256B reserved; read 0x48; write + * 0x42, erase 0x44 */ + .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid, + .probe_timing = TIMING_ZERO, + .block_erasers = { + { + .eraseblocks = { {4 * 1024, 2048} }, + .block_erase = spi_block_erase_20, + }, { + .eraseblocks = { {64 * 1024, 128} }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { { 8192 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { { 8192 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .printlock = spi_prettyprint_status_register_default_bp3, + .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ + .write = spi_chip_write_256, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */ + .voltage = {2700, 3600}, + }, + + { + .vendor = "Spansion", .name = "S25FL128S......0", /* uniform 256kB sectors */ .bustype = BUS_SPI, .manufacture_id = SPANSION_ID, diff --git a/flashchips.h b/flashchips.h index e6e5e8a..b0d64be 100644 --- a/flashchips.h +++ b/flashchips.h @@ -565,6 +565,9 @@ #define SPANSION_S25FL204 0x4013 #define SPANSION_S25FL208 0x4014 #define SPANSION_S25FL216 0x4015 /* Same as S25FL216K, but the latter supports OTP, 3 status regs, quad I/O, SFDP etc. */ +#define SPANSION_S25FL132K 0x4016 +#define SPANSION_S25FL164K 0x4017 + /* * SST25 chips are SPI, first byte of device ID is memory type, second * byte of device ID is related to log(bitsize) at least for some chips. -- 1.8.3.2

2 2

raspberry pi as lpc programmer
by goran metlic 03 May '14

03 May '14

Hi I'm not proficient in programming and have used before available information about flashing bios chips. I have flashed SPI bios using flashrom and RPI. Now I need to flash LPC chip - SST49LF080A. I don't have access to programmer that can program this chip but i was wandering what needs to be done to enable raspberry pi to flash this type of chips. I have seen programmer using Atmel chip so i wanted to know if something can be changed on raspberry pi side to enable LPC flashing (or parallel for that matter). I'm willing to experiment with raspberry pi and LPC / parallel chips. Kind Regards Goran Metlic

2 1

Flashrom very slow to erase chip
by anthony enos 03 May '14

03 May '14

I am using Dediprog programmer and currently using 8192 kB SPI Winbond "W25Q64.W" chip. Currently my time to erase chip is in excess of 10 mins. On the programmer i can see it is working in 4 KB chunks at about 4 chunks per second. So very roughly 16 KB/s. Is this right? Is there any way to erase a chip faster. Any insight on this matter would be greatly appreciated. Regards, Anthony Enos

2 1

issue with Micron N25Q128
by Shih-Chieh Huang 03 May '14

03 May '14

Hi, I am having problem programing N25Q128 using flashrom0.9.7. I got the following errors from erasing address at 0x83f000. I have tried different boards and they failed at the same locations. There are three versions of N25Q128, uniform, top, and bottom. Only the 8 first/last sectors of top/bottom version supports subsector erase. But, from N25Q128 configuration in flashchip.c, it first tries SSE (0x20) for the entire chip. Could it be the problem? Is there a fix for this? Thank you very much. Found Micron/Numonyx/ST flash chip "N25Q128..3E" (16384 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). Block protection is disabled. Flash image seems to be a legacy BIOS. Disabling coreboot-related checks. Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0..... <skip some subsector erase messages..... > 0x774000-0x774fff:S, 0x775000-0x775fff:S, 0x776000-0x776fff:S, 0x777000-0x777fff:S, 0x778000-0x778fff:S, 0x779000-0x779fff:S, 0x77a000-0x77afff:S, 0x77b000-0x77bfff:S, 0x77c000-0x77cfff:S, 0x77d000-0x77dfff:S, 0x77e000-0x77efff:S, 0x77f000-0x77ffff:S, 0x780000-0x780fff:S, 0x781000-0x781fff:S, 0x782000-0x782fff:S, 0x783000-0x783fff:S, 0x784000-0x784fff:S, 0x785000-0x785fff:S, 0x786000-0x786fff:S, 0x787000-0x787fff:S, 0x788000-0x788fff:S, 0x789000-0x789fff:S, 0x78a000-0x78afff:S, 0x78b000-0x78bfff:S, 0x78c000-0x78cfff:S, 0x78d000-0x78dfff:S, 0x78e000-0x78efff:S, 0x78f000-0x78ffff:S, 0x790000-0x790fff:S, 0x791000-0x791fff:S, 0x792000-0x792fff:S, 0x793000-0x793fff:S, 0x794000-0x794fff:S, 0x795000-0x795fff:S, 0x796000-0x796fff:S, 0x797000-0x797fff:S, 0x798000-0x798fff:S, 0x799000-0x799fff:S, 0x79a000-0x79afff:S, 0x79b000-0x79bfff:S, 0x79c000-0x79cfff:S, 0x79d000-0x79dfff:S, 0x79e000-0x79efff:S, 0x79f000-0x79ffff:S, 0x7a0000-0x7a0fff:S, 0x7a1000-0x7a0 (payload length was 64). spi_nbyte_program failed during command execution at address 0x83f000 Reading current flash chip contents... done. Looking for another erase function. Trying erase function 1... 0x000000-0x00ffff:S, 0x010000-0x01ffff:S, 0x020000-0x02ffff:S, 0x030000-0x03ffff:S, 0x040000-0x04ffff:S, 0x050000-0x05ffff:S, 0x060000-0x06ffff:S, 0x070000-0x07ffff:S, 0x080000-0x08ffff:S, 0x090000-0x09ffff:S, 0x0a0000-0x0affff:S, 0x0b0000-0x0bffff:S, 0x0c0000-0x0cffff:S, 0x0d0000-0x0dffff:S, 0x0e0000-0x0effff:S, 0x0f0000-0x0fffff:S, 0x100000-0x10ffff:S, 0x110000-0x11ffff:S, 0x120000-0x12ffff:S, 0x130000-0x13ffff:S, 0x140000-0x14ffff:S, 0x150000-0x15ffff:S, 0x160000-0x16ffff:S, 0x170000-0x17ffff:S, 0x180000-0x18ffff:S, 0x190000-0x19ffff:S, 0x1a0000-0x1affff:S, 0x1b0000-0x1bffff:S, 0x1c0000-0x1cffff:S, 0x1d0000-0x1dffff:S, 0x1e0000-0x1effff:S, 0x1f0000-0x1fffff:S, 0x200000-0x20ffff:S, 0x210000-0x21ffff:S, 0x220000-0x22ffff:S, 0x230000-0x23ffff:S, 0x240000-0x24ffff:S, 0x250000-0x25ffff:S, 0x260000-0x26ffff:S, 0x270000-0x27ffff:S, 0x280000-0x28ffff:S, 0x290000-0x29ffff:S, 0x2a0000-0x2affff:S, 0x2b0000-0x2bffff:S, 0x2c0000-0x2cffff:S, 0x2d0000-0x2dffff:S, 0x2e0000-0x2effff:S, 0x2f0000-0x2fffff:S, 0x300000-0x30ffff:S, 0x310000-0x31ffff:S, 0x320000-0x32ffff:S, 0x330000-0x33ffff:S, 0x340000-0x34ffff:S, 0x350000-0x35ffff:S, 0x360000-0x36ffff:S, 0x370000-0x37ffff:S, 0x380000-0x38ffff:S, 0x390000-0x39ffff:S, 0x3a0000-0x3affff:S, 0x3b0000-0x3bffff:S, 0x3c0000-0x3cffff:S, 0x3d0000-0x3dffff:S, 0x3e0000-0x3effff:S, 0x3f0000-0x3fffff:S, 0x400000-0x40ffff:S, 0x410000-0x41ffff:S, 0x420000-0x42ffff:S, 0x430000-0x43ffff:S, 0x440000-0x44ffff:S, 0x450000-0x45ffff:S, 0x460000-0x46ffff:S, 0x470000-0x47ffff:S, 0x480000-0x48ffff:S, 0x490000-0x49ffff:S, 0x4a0000-0x4affff:S, 0x4b0000-0x4bffff:S, 0x4c0000-0x4cffff:S, 0x4d0000-0x4dffff:S, 0x4e0000-0x4effff:S, 0x4f0000-0x4fffff:S, 0x500000-0x50ffff:S, 0x510000-0x51ffff:S, 0x520000-0x52ffff:S, 0x530000-0x53ffff:S, 0x540000-0x54ffff:S, 0x550000-0x55ffff:S, 0x560000-0x56ffff:S, 0x570000-0x57ffff:S, 0x580000-0x58ffff:S, 0x590000-0x59ffff:S, 0x5a0000-0x5affff:S, 0x5b0000-0x5bffff:S, 0x5c0000-0x5cffff:S, 0x5d0000-0x5dffff:S, 0x5e0000-0x5effff:S, 0x5f0000-0x5fffff:S, 0x600000-0x60ffff:S, 0x610000-0x61ffff:S, 0x620000-0x62ffff:S, 0x630000-0x63ffff:S, 0x640000-0x64ffff:S, 0x650000-0x65ffff:S, 0x660000-0x66ffff:S, 0x670000-0x67ffff:S, 0x680000-0x68ffff:S, 0x690000-0x69ffff:S, 0x6a0000-0x6affff:S, 0x6b0000-0x6bffff:S, 0x6c0000-0x6cffff:S, 0x6d0000-0x6dffff:S, 0x6e0000-0x6effff:S, 0x6f0000-0x6fffff:S, 0x700000-0x70ffff:S, 0x710000-0x71ffff:S, 0x720000-0x72ffff:S, 0x730000-0x73ffff:S, 0x740000-0x74ffff:S, 0x750000-0x75ffff:S, 0x760000-0x76ffff:S, 0x770000-0x77ffff:S, 0x780000-0x78ffff:S, 0x790000-0x79ffff:S, 0x7a0000-0x7affff:S, 0x7b0000-0x7bffff:S, 0x7c0000-0x7cffff:S, 0x7d0000-0x7dffff:S, 0x7e0000-0x7effff:S, 0x7f0000-0x7fffff:S, 0x800000-0x80ffff:S, 0x810000-0x81ffff:S, 0x820000-0x82ffff:S, 0x830000-0x83ffff:WTransaction error! SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0 SSFC: SCGO=0, ACS=1, SPOP=0, COP=0, DBC=63, SME=0, SCF=0 Running OPCODE 0x02 failed at address 0x83f000 (payload length was 64). spi_nbyte_program failed during command execution at address 0x83f000 Reading current flash chip contents... done. Looking for another erase function. Trying erase function 2... 0x000000-0xffffff:WTransaction error! SSFS: SCIP=0, FDONE=1, FCERR=1, AEL=0 SSFC: SCGO=0, ACS=1, SPOP=0, COP=0, DBC=63, SME=0, SCF=0 Running OPCODE 0x02 failed at address 0x83f000 (payload length was 64). spi_nbyte_program failed during command execution at address 0x83f000 Looking for another erase function. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything changed. Good. It seems nothing was changed. Writing to the flash chip apparently didn't do anything. This means we have to add special support for your board, programmer or flash chip. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! ------------------------------------------------------------------------------- You may now reboot or simply leave the machine running. Restoring MMIO space at 0x7ff240f028a0 Restoring MMIO space at 0x7ff240f0289c Restoring MMIO space at 0x7ff240f02898 Restoring MMIO space at 0x7ff240f02896 Restoring MMIO space at 0x7ff240f02894 flashchips.c: { .vendor = "Micron/Numonyx/ST", .name = "N25Q128..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */ .bustype = BUS_SPI, .manufacture_id = ST_ID, .model_id = ST_N25Q128__3E, .total_size = 16384, .page_size = 256, /* supports SFDP */ /* OTP: 64B total; read 0x4B, write 0x42 */ .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, .tested = TEST_OK_PREW, .probe = probe_spi_rdid, .probe_timing = TIMING_ZERO, .block_erasers = { { .eraseblocks = { {4 * 1024, 4096 } }, .block_erase = spi_block_erase_20, }, { .eraseblocks = { {64 * 1024, 256} }, .block_erase = spi_block_erase_d8, }, { .eraseblocks = { {16384 * 1024, 1} }, .block_erase = spi_block_erase_c7, } }, Thanks, Cliff

2 3

Re: [flashrom] ZOTAC IONITX-A-E: flashrom -V
by Stefan Tauner 03 May '14

03 May '14

Hello Maciej, thanks for your report! I have added your board and your chipset to our list of supported hardware and will commit that later together with other small changes. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] N25Q064A13E
by Stefan Tauner 03 May '14

03 May '14

On Sat, 22 Feb 2014 01:36:00 -0500 Corey Osgood <corey.osgood(a)gmail.com> wrote: > It looks like the windows build of flashrom was broken at some point > so the latest version won't compile for windows (mingw doesn't like > gnu_printf). IIRC that depends on the version... and mingw was forked/reimplemented too. In general the builds are definitely not broken, i686-w64-mingw32-gcc works fine for me. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

FT4232H MiniModule: Micron/Numonyx/ST flash chip "N25Q064..1E" logs
by Paolo ZAMBOTTI 03 May '14

03 May '14

Hi, As requested by flashrom note, here are the logs for probe, erase, read and write operations I successfully performed on a Micron/Numonyx/ST flash chip "N25Q064A11E" through a FT4232H MiniModule. Thanks for the tool. Cheers, Paolo.

2 1

ECS P6BAP-A+ Rev 2.2 flashed correctly.
by Arnaldo Pirrone 03 May '14

03 May '14

Hi, i just flashed the bios on the aforesaid motherboard using flashrom, it worked well and the process of erasing/writing seemed to be a lot faster than the dos/(flashutil.exe) in a floppy that i used up by now. The flash is a EON EN29F002NT. I'm attaching the log as proof.

2 1

Flashroom - MS 7502 v1.2 BIOS
by CheVeyo20 03 May '14

03 May '14

Hello there :), is it possible to flash an BIOS Chip (Board: MS 7502 v 1.2 with the BIOS W7502IM710C) over the JSPI Port with a Raspberry Pi? My BIOS Update went wrong and the bootblock is not working.. I did not find the Board in the supported Hardware of flashrom :( greetings CheVeyo

2 1

Re: [flashrom] Foxconn NT-510: flashrom doesn't find anything
by Stefan Tauner 02 May '14

02 May '14

On Wed, 5 Feb 2014 22:59:41 -0800 Daniel Lenski <dlenski(a)gmail.com> wrote: > Hello, > I have a Flashrom NT-510 nettop (Intel Atom D510, ICH7/NM10 chipset). > Flashrom doesn't find any chip while probing. Complete output of > sensors-detect and flashrom -V here: > http://paste.flashrom.org/view.php?id=1966 > > When running sensors-detect to find thermal/fan/etc., it appears to find an > EEPROM chip while probing I2C/SMBus adapters, however I think this is just > an EEPROM that gives information about the RAM module, rather than a > BIOS/firmware Flash chip: > > SMBus I801 adapter at 0400 (i2c-6) > Probing for `SPD EEPROM'... Yes > (confidence 8, not a hardware monitoring chip) > > > Does anyone else have experience with this system and might know how to > probe and read the BIOS EEPROM? > It could be hidden behind another chip. Can you please send us the output of 'superiotool -deV'? Ah, sensors-detect even reports the suspect, an ITE 8502. Support for this is disabled currently due to safety reasons. Carl-Daniel, can you please take a look at this, you know that code way better than me. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Report SST25VF020B
by Michaël Zweers 02 May '14

02 May '14

user@ubuntu:/data/flashrom$ sudo flashrom -p ft2232_spi:type=2232H,port=A -Vw "lapdock.bin" flashrom v0.9.7-r1764 on Linux 3.11.0-13-generic (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.9, GCC 4.8.1, little endian Command line (4 args): flashrom -p ft2232_spi:type=2232H,port=A -Vw lapdock.bin Calibrating delay loop... OS timer resolution is 1 usecs, 981M loops per second, delay more than 10% too short (got 78% of expected delay), recalculating... 979M loops per second, delay more than 10% too short (got 77% of expected delay), recalculating... 1004M loops per second, delay more than 10% too short (got 79% of expected delay), recalculating... 1008M loops per second, delay more than 10% too short (got 87% of expected delay), recalculating... 982M loops per second, delay loop is unreliable, trying to continue 10 myus = 11 us, 100 myus = 106 us, 1000 myus = 867 us, 10000 myus = 7799 us, 4 myus = 8 us, OK. Initializing ft2232_spi programmer Using device type FTDI FT2232H channel A. Disable divide-by-5 front stage Set clock divisor MPSSE clock: 60.000000 MHz, divisor: 2, SPI clock: 30.000000 MHz No loopback of TDI/DO TDO/DI Set data bits The following protocols are supported: SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Atmel AT25F512, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512A, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Atmel AT25F1024(A), 128 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F2048, 256 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F4096, 512 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Atmel AT45DB321E, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Macronix MX25L1605D/MX25L1608D, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Macronix MX25L3206E, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Macronix MX25L6405(D), 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Macronix MX25L6445E, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Macronix MX25L12805(D), 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST M25PX80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST M45PE10, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST M45PE20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST M45PE40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST M45PE80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST M45PE16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Nantronics N25S10, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Nantronics N25S20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Nantronics N25S40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Nantronics N25S80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Nantronics N25S16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for PMC Pm25LV512(A), 64 kB: probe_spi_res3: id1 0xbf8c, id2 0xbf Probing for PMC Pm25LV010, 128 kB: probe_spi_res3: id1 0xbf8c, id2 0xbf Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Sanyo LE25FW203A, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Sanyo LE25FW403A, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Sanyo LE25FW418A, 512 kB: probe_spi_res2: id1 0xbf, id2 0x8c Probing for Sanyo LE25FW806, 1024 kB: probe_spi_res2: id1 0xbf, id2 0x8c Probing for Sanyo LE25FW808, 1024 kB: probe_spi_res2: id1 0xbf, id2 0x8c Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Spansion S25FL204K, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Spansion S25FL208K, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Spansion S25FL116K/S25FL216K, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Spansion S25FL128S......0, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0xbf, id2 0x8c Probing for SST SST25LF080(A), 1024 kB: probe_spi_res2: id1 0xbf, id2 0x8c Probing for SST SST25VF512A, 64 kB: probe_spi_rems: id1 0xbf, id2 0x8c Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0xbf, id2 0x8c Probing for SST SST25VF020, 256 kB: probe_spi_rems: id1 0xbf, id2 0x8c Probing for SST SST25VF020B, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Found SST flash chip "SST25VF020B" (256 kB, SPI) on ft2232_spi. Chip status register is 0x00. Chip status register: Block Protect Write Disable (BPL) is not set Chip status register: Auto Address Increment Programming (AAI) is not set Chip status register: Block Protect 3 (BP3) is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0xbf, id2 0x8c Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0xbf, id2 0x8c Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Winbond W25Q80.V, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Winbond W25Q16.V, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Winbond W25Q32.V, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Winbond W25Q64.V, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Winbond W25Q128.V, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Winbond W25Q20.W, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Winbond W25Q40.W, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Winbond W25Q80.W, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Winbond W25Q16.W, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Winbond W25Q32.W, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Winbond W25Q64.W, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Unknown SFDP-capable chip, 0 kB: No SFDP signature found. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258c Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0xbf, id2 0x8c Found SST flash chip "SST25VF020B" (256 kB, SPI). === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org <mailto:flashrom@flashrom.org> if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -VE, -Vw), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:EW, 0x001000-0x001fff:EW, 0x002000-0x002fff:EW, 0x003000-0x003fff:EW, 0x004000-0x004fff:EW, 0x005000-0x005fff:EW, 0x006000-0x006fff:EW, 0x007000-0x007fff:EW, 0x008000-0x008fff:EW, 0x009000-0x009fff:EW, 0x00a000-0x00afff:EW, 0x00b000-0x00bfff:EW, 0x00c000-0x00cfff:EW, 0x00d000-0x00dfff:EW, 0x00e000-0x00efff:EW, 0x00f000-0x00ffff:EW, 0x010000-0x010fff:EW, 0x011000-0x011fff:EW, 0x012000-0x012fff:EW, 0x013000-0x013fff:EW, 0x014000-0x014fff:EW, 0x015000-0x015fff:EW, 0x016000-0x016fff:EW, 0x017000-0x017fff:EW, 0x018000-0x018fff:EW, 0x019000-0x019fff:EW, 0x01a000-0x01afff:EW, 0x01b000-0x01bfff:EW, 0x01c000-0x01cfff:EW, 0x01d000-0x01dfff:EW, 0x01e000-0x01efff:EW, 0x01f000-0x01ffff:EW, 0x020000-0x020fff:EW, 0x021000-0x021fff:EW, 0x022000-0x022fff:EW, 0x023000-0x023fff:EW, 0x024000-0x024fff:EW, 0x025000-0x025fff:EW, 0x026000-0x026fff:EW, 0x027000-0x027fff:EW, 0x028000-0x028fff:EW, 0x029000-0x029fff:EW, 0x02a000-0x02afff:EW, 0x02b000-0x02bfff:EW, 0x02c000-0x02cfff:EW, 0x02d000-0x02dfff:EW, 0x02e000-0x02efff:EW, 0x02f000-0x02ffff:EW, 0x030000-0x030fff:EW, 0x031000-0x031fff:EW, 0x032000-0x032fff:EW, 0x033000-0x033fff:EW, 0x034000-0x034fff:EW, 0x035000-0x035fff:EW, 0x036000-0x036fff:EW, 0x037000-0x037fff:EW, 0x038000-0x038fff:EW, 0x039000-0x039fff:EW, 0x03a000-0x03afff:E, 0x03b000-0x03bfff:E, 0x03c000-0x03cfff:E, 0x03d000-0x03dfff:EW, 0x03e000-0x03efff:E, 0x03f000-0x03ffff:EW Erase/write done. Verifying flash... VERIFIED.

2 1

Support for SST26VF064B
by Elias Kesh 02 May '14

02 May '14

flashrom -p dediprog -VV flashrom v0.9.7-r1711 on Linux 3.8.0-32-lowlatency (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.1.9, GCC 4.8.1, little endian Command line (3 args): flashrom -p dediprog -VV Calibrating delay loop... OS timer resolution is 1 usecs, 459M loops per second, 10 myus = 9 us, 100 myus = 115 us, 1000 myus = 1021 us, 10000 myus = 10095 us, 4 myus = 5 us, OK. Initializing dediprog programmer Found USB device (0483:dada). Found a SF100 V:5.2.00 Selecting target chip 1 Setting SPI voltage to 0.000 V SPI speed is 12M Hz Found a SF100 V:5.2.00 Selecting target chip 1 Setting SPI voltage to 3.500 V The following protocols are supported: SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Atmel AT25F512, 64 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F512A, 64 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Atmel AT25F1024(A), 128 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F2048, 256 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25F4096, 512 kB: probe_spi_at25f: id1 0x00, id2 0x00 Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Macronix MX25L1605D/MX25L1608D, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Macronix MX25L3206E, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Macronix MX25L6405(D), 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Macronix MX25L6445E, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Macronix MX25L12805(D), 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST M25PE10, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST M25PE20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST M25PE40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST M25PX80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST M45PE10, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST M45PE20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST M45PE40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST M45PE80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST M45PE16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Nantronics N25S10, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Nantronics N25S20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Nantronics N25S40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Nantronics N25S80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Nantronics N25S16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for PMC Pm25LV512(A), 64 kB: probe_spi_res3: id1 0x0, id2 0x0 Probing for PMC Pm25LV010, 128 kB: probe_spi_res3: id1 0x0, id2 0x0 Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Sanyo LE25FW203A, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Sanyo LE25FW403A, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Sanyo LE25FW418A, 512 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for Sanyo LE25FW806, 1024 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for Sanyo LE25FW808, 1024 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Spansion S25FL204K, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Spansion S25FL208K, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Spansion S25FL116K/S25FL216K, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Spansion S25FL128S......0, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for SST SST25LF080(A), 1024 kB: probe_spi_res2: id1 0x0, id2 0x0 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Winbond W25Q80.V, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Winbond W25Q16.V, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Winbond W25Q32.V, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Winbond W25Q64.V, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Winbond W25Q128.V, 16384 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Winbond W25Q20.W, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Winbond W25Q40.W, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Winbond W25Q80.W, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Winbond W25Q16.W, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Winbond W25Q32.W, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Winbond W25Q64.W, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Unknown SFDP-capable chip, 0 kB: SFDP revision = 1.0 SFDP number of parameter headers is 3 (NPH = 2). SFDP parameter table header 0/2: ID 0x00, version 1.0 Length 36 B, Parameter Table Pointer 0x000030 Parsing JEDEC flash parameter table... 3-Byte only addressing. Status register is volatile and writes to the status register have to be enabled with WREN (0x06). Write chunk size is at least 64 B. Flash chip size is 8192 kB. Block eraser 0: 2048 x 4096 B with opcode 0x20 Block eraser 1: 1024 x 8192 B with opcode 0xd8 Block eraser 2: 256 x 32768 B with opcode 0xd8 Block eraser 3: 128 x 65536 B with opcode 0xd8 done. SFDP parameter table header 1/2: ID 0x00, version 255.255 Length 0 B, Parameter Table Pointer 0xffffff SFDP parameter table header 2/2: ID 0xbf, version 1.0 Length 96 B, Parameter Table Pointer 0x000200 === SFDP has autodetected a flash chip which is not natively supported by flashrom yet. All standard operations (read, verify, erase and write) should work, but to support all possible features we need to add them manually. You can help us by mailing us the output of the following command to flashrom(a)flashrom.org: 'flashrom -VV [plus the -p/--programmer parameter]' Thanks for your help! === Found Unknown flash chip "SFDP-capable chip" (8192 kB, SPI) on dediprog. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x2643 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0x0, id2 0x0 Found Unknown flash chip "SFDP-capable chip" (8192 kB, SPI). No operations were specified. Setting SPI voltage to 0.000 V

2 1

status report (write works!)
by Oskar Enoksson 02 May '14

02 May '14

I just wanted to report that all operations (read/erase/write) work fine on SST49LF040. I may run an old version, but I saw there is a "?" in the table on your website for "write" on this chip. # ../flashrom-0.9.2/flashrom -w build/coreboot.rom flashrom v0.9.2-r1001 on Linux 3.4.63-2.44-desktop (x86_64), built with libpci 2.2.3, GCC 4.1.2 20080704 (Red Hat 4.1.2-46) flashrom is free software, get the source code at http://www.flashrom.org coreboot table found at 0xbffee000. Found chipset "AMD AMD8111", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "SST SST49LF040" (512 KB, LPC) at physical address 0xfff80000. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === Writing flash chip... Erasing flash chip... SUCCESS. Programming page: DONE!ss: 0x0007f000 COMPLETE. Verifying flash... VERIFIED.

2 1

MX25L128 Support
by Brian Rak 02 May '14

02 May '14

So, after realizing that the MX25L256 was the wrong chip, I've obtained a few of the correct chips (MX25L12845EMI-10G). These are detected by flashrom, but writes are failing. Erase/write done. Verifying flash... FAILED at 0x00000002! Expected=0x55, Found=0x75, failed byte count from 0x00000000-0x00ffffff: 0x3e5cb3 Your flash chip is in an unknown state. Please report this on IRC at chat.freenode.net (channel #flashrom) or mail flashrom(a)flashrom.org, thanks! This is using a raspberry pi as a programmer, and: ./flashrom -p linux_spi:dev=/dev/spidev0.0,spispeed=32000 -w ../flashrom/ipmi/SMT_313.bin -o debug1 -rw-r--r-- 1 root root 16777216 Jan 2 19:10 ../flashrom/ipmi/SMT_313.bin Any suggestions here? -o debug1 is attached

2 2

Re: [flashrom] MX25L25635F support?
by Stefan Tauner 02 May '14

02 May '14

On Fri, 24 Jan 2014 14:05:17 +0100 Idwer Vollering <vidwer(a)gmail.com> wrote: > Which version or build of flashrom were you using? Chip support for > this MX25L25635F was committed a while ago: > http://flashrom.org/trac/flashrom/changeset/1702 That is not true. The only thing that was committed was the ID (for further reference). This chip requires 4-byte addressing because it is >16MB and hence wont be supported soonish. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

3 6

Re: [flashrom] flashrom serprog problem
by Juan Lucero 02 May '14

02 May '14

Thanks a lot for your reply. I could not found ch341 support in serprog help but i tried anyway. i offered myself to translate serprog to spanish for all those who can manage it in English. Best regards Juan Lucero Enviado desde Samsung Mobile -------- Mensaje original -------- De: Stefan Tauner <stefan.tauner(a)alumni.tuwien.ac.at> Fecha: 02/05/2014 17:24 (GMT-03:00) A: Juan Lucero <juan_lucero(a)hotmail.com> CC: flashrom(a)flashrom.org Asunto: Re: [flashrom] flashrom serprog problem On Wed, 8 Jan 2014 13:35:51 -0300 Juan Lucero <juan_lucero(a)hotmail.com> wrote: > Hi, i have installed flashrom 0.9.7 in my acer laptop with ubuntu 12.04 > 32 bits. I have a ch341a serial programmer and i am trying to flash a > windbond 25q64 memory. > I run this: > > sudo flashrom -V -f -w bravissimo.abs -p > serprog:dev=/dev/bus/usb/002/003:19200 > […] > Any ideas? That's wrong on many levels. The ch341a does not support the serprog protocol (probably), the serprog driver does not expect a usb device but a tty device as parameter, and -f should never be used. We would need to reverse engineer the ch341a protocol to add dedicated support for it to flashrom. It is currently not supported at all by flashrom AFAIK, sorry. > PS: would you like me to translate flashrom to spanish? I am pretty much against i18n of low-level software. How am I supposed to help someone that is not even able to work with an english flashrom UI? :) The manpage OTOH is quite detailed and may be more easily understood in the user's first language. Translating that is probably way more effort than flashrom itself but IMHO it would be way more useful and I would certainly include it in the repo. The main problem I see there is how to keep it updated? Thank you very much for your kind offer anyway. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] HP AAHD3-H8 Motherboard flashing with Uno
by Stefan Tauner 02 May '14

02 May '14

On Tue, 21 Jan 2014 17:30:11 -0500 Elvis Kit <elviskit(a)gmail.com> wrote: > Hello, > > I am getting this error message when i attempt to re-flash the bricked bios > of this motherboard. Any help would be greatly appreciated! > > > e6410 Test # flashrom -p serprog:dev=/dev/ttyACM0:2000000 -w HIB_716.ROM > flashrom v0.9.7-r1764 on Linux 3.2.0-4-486 (i686) > flashrom is free software, get the source code at http://www.flashrom.org > > Calibrating delay loop... OK. > serprog: Programmer name is "serprog-duino" > Found Winbond flash chip "W25Q16.V" (2048 kB, SPI) on serprog. > Reading old flash chip contents... done. > Erasing and writing flash chip... FAILED at 0x00000000! Expected=0xff, > Found=0x00, failed byte count from 0x00000000-0x00000fff: 0x1000 > ERASE FAILED! > Reading current flash chip contents... done. FAILED at 0x00000000! > Expected=0xff, Found=0x00, failed byte count from 0x00000000-0x00007fff: > 0x8000 > ERASE FAILED! > Reading current flash chip contents... Error: invalid response 0x00 from > device > Can't read anymore! Aborting. > FAILED! > Uh oh. Erase/write failed. Checking if anything changed. > Error: invalid response 0x00 from device > Your flash chip is in an unknown state. > Please report this on IRC at chat.freenode.net (channel #flashrom) or > mail flashrom(a)flashrom.org, thanks! > > Thanks in advance! Probably bad wiring. It is also important to connect *all* (input) pins of the flash chip. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

Re: [flashrom] Please support my laptop!
by Stefan Tauner 02 May '14

02 May '14

On Thu, 16 Jan 2014 16:39:00 -0800 Max Stevens <max(a)fishlick.com> wrote: > Here's the output of flashrom -V -p internal Hello Max, it is unlikely that flashrom will support your laptop soon-ish, but to preserve the chances we need the output of 'superiotool -deV'. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

flashrom serprog problem
by Juan Lucero 02 May '14

02 May '14

Hi, i have installed flashrom 0.9.7 in my acer laptop with ubuntu 12.04 32 bits. I have a ch341a serial programmer and i am trying to flash a windbond 25q64 memory. I run this: sudo flashrom -V -f -w bravissimo.abs -p serprog:dev=/dev/bus/usb/002/003:19200 and I get this: flashrom v0.9.7-r1711 on Linux 3.2.0-58-generic-pae (i686) flashrom is free software, get the source code athttp://www.flashrom.org <http://www.flashrom.org/>flashrom was built with libpci 3.1.8, GCC 4.6.3, little endian Command line (6 args): flashrom -V -f -w bravissimo.abs -p serprog:dev=/dev/bus/usb/002/003:19200 Calibrating delay loop... OS timer resolution is 1 usecs, 1995M loops per second, 10 myus = 11 us, 100 myus = 101 us, 1000 myus = 1007 us, 10000 myus = 10002 us, 4 Initializing serprog programmer Error: Could not fetch original serial port configuration: Inappropriate ioctl for device Error: Programmer initialization failed. Any ideas? Best Regards. Juan. Argentina.- PS: would you like me to translate flashrom to spanish?

2 1

M25PX64 write support
by Zaolin 02 May '14

02 May '14

Hi, the write operation seems to work very well ;). http://paste.flashrom.org/view.php?id=1878 Regards Zaolin

2 2

Success: READ EN25QH64 with buspirate
by Vladimir 'φ-coder/phcoder' Serbinenko 02 May '14

02 May '14

flashrom v0.9.7-r1764 on Linux 3.12-rc7-amd64 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.1, GCC 4.8.2, little endian Command line (6 args): ./flashrom -p buspirate_spi:dev=/dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A900fzbu-if00-port0,spispeed=1M -r /home/phcoder/x230/orig_bottom.rom -n -V Calibrating delay loop... OS timer resolution is 1 usecs, 929M loops per second, 10 myus = 11 us, 100 myus = 101 us, 1000 myus = 999 us, 10000 myus = 10043 us, 4 myus = 5 us, OK. Initializing buspirate_spi programmer Baud rate is 115200 now. Detected Bus Pirate hardware v3.b Detected Bus Pirate firmware 6.1 Using SPI command set v2. SPI speed is 1MHz Raw bitbang mode version 1 Raw SPI mode version 1 The following protocols are supported: SPI. Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L16PT, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L16PU, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L512, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L010, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L020, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L040, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L080, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L016, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25L032, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25LQ16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25LQ032/A25LQ32A, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for AMIC A25LQ64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT25DF021, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT25DF041A, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT25DF081, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT25DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT25DF161, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT25DF321, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT25DF321A, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT25DF641(A), 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT25DQ161, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT25F512, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512A, 64 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F512B, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT25F1024(A), 128 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F2048, 256 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25F4096, 512 kB: probe_spi_at25f: id1 0xff, id2 0xff Probing for Atmel AT25FS010, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT25FS040, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT26DF041, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT26DF081A, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT26DF161, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT26DF161A, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT26F004, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT45CS1282, 16896 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT45DB011D, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT45DB021D, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT45DB041D, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT45DB081D, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT45DB161D, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT45DB321C, 4224 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT45DB321D, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT45DB321E, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel AT45DB642D, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for ESMT F25L008A, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B05, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B05T, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B10, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B10T, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B20T, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B40T, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B80T, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B16T, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B32T, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25B64T, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25F05, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25F10, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25F20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25F40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25F80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25F16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25F32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25F64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25Q40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25Q80(A), 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25Q16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25Q32(A/B), 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25Q64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25Q128, 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25QH16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25QH32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25QH64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Found Eon flash chip "EN25QH64" (8192 kB, SPI) on buspirate_spi. Chip status register is 0x00. Chip status register: Status Register Write Disable (SRWD, SRP, ...) is not set Chip status register: Bit 6 is not set Chip status register: Block Protect 3 (BP3) is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is not set Chip status register: Write In Progress (WIP/BUSY) is not set Probing for Eon EN25QH128, 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25S10, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25S20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25S40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25S80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25S16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25S32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon EN25S64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for GigaDevice GD25LQ32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for GigaDevice GD25Q512, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for GigaDevice GD25Q10, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for GigaDevice GD25Q20(B), 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for GigaDevice GD25Q40(B), 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for GigaDevice GD25Q80(B), 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for GigaDevice GD25Q16(B), 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for GigaDevice GD25Q32(B), 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for GigaDevice GD25Q64(B), 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for GigaDevice GD25Q128B, 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for GigaDevice GD25T80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Intel 25F160S33B8, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Intel 25F160S33T8, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Intel 25F320S33B8, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Intel 25F320S33T8, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Intel 25F640S33B8, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Intel 25F640S33T8, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L2005(C), 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L4005(A/C), 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L8005/MX25V8005, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L1605, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L1605D/MX25L1608D, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L1635D, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L1635E, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L3205(A), 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L3206E, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L3235D, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L6405(D), 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L6445E, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25L12805(D), 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25U1635E, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25U3235E/F, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix MX25U6435E/F, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25P05-A, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25P05, 64 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P10-A, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25P10, 128 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25P20-old, 256 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25P40-old, 512 kB: Ignoring RES in favour of RDID. Probing for Micron/Numonyx/ST M25P80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25P16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25P32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25P64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25P128, 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25PE10, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25PE20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25PE40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25PE80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25PE16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25PX80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25PX16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25PX32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M25PX64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M45PE10, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M45PE20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M45PE40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M45PE80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST M45PE16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST N25Q016, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST N25Q032..1E, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST N25Q032..3E, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST N25Q064..1E, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST N25Q064..3E, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST N25Q128..1E, 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Micron/Numonyx/ST N25Q128..3E, 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Nantronics N25S10, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Nantronics N25S20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Nantronics N25S40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Nantronics N25S80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Nantronics N25S16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for PMC Pm25LD256C, 32 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for PMC Pm25LD512(C), 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for PMC Pm25LD010(C), 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for PMC Pm25LD020(C), 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for PMC Pm25LD040(C), 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for PMC Pm25LV512(A), 64 kB: probe_spi_res3: id1 0x1616, id2 0x16 Probing for PMC Pm25LV010, 128 kB: probe_spi_res3: id1 0x1616, id2 0x16 Probing for PMC Pm25LV010A, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for PMC Pm25LV020, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for PMC Pm25LV040, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for PMC Pm25LV080B, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for PMC Pm25LV016B, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Sanyo LE25FW203A, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Sanyo LE25FW403A, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Sanyo LE25FW418A, 512 kB: probe_spi_res2: id1 0x16, id2 0x16 Probing for Sanyo LE25FW806, 1024 kB: probe_spi_res2: id1 0x16, id2 0x16 Probing for Sanyo LE25FW808, 1024 kB: probe_spi_res2: id1 0x16, id2 0x16 Probing for Spansion S25FL004A, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Spansion S25FL008A, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Spansion S25FL016A, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Spansion S25FL032A/P, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Spansion S25FL064A/P, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Spansion S25FL204K, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Spansion S25FL208K, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Spansion S25FL116K/S25FL216K, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Spansion S25FL128S......0, 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x16, id2 0x16 Probing for SST SST25LF080(A), 1024 kB: probe_spi_res2: id1 0x16, id2 0x16 Probing for SST SST25VF512A, 64 kB: probe_spi_rems: id1 0x1c, id2 0x16 Probing for SST SST25VF010, 128 kB: probe_spi_rems: id1 0x1c, id2 0x16 Probing for SST SST25VF020, 256 kB: probe_spi_rems: id1 0x1c, id2 0x16 Probing for SST SST25VF020B, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for SST SST25VF040, 512 kB: probe_spi_rems: id1 0x1c, id2 0x16 Probing for SST SST25VF040B, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for SST SST25VF040B.REMS, 512 kB: probe_spi_rems: id1 0x1c, id2 0x16 Probing for SST SST25VF080B, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for SST SST25VF016B, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for SST SST25VF032B, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for SST SST25VF064C, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for SST SST25WF512, 64 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for SST SST25WF010, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for SST SST25WF020, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for SST SST25WF040, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25Q80.V, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25Q16.V, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25Q32.V, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25Q64.V, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25Q128.V, 16384 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25Q20.W, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25Q40.W, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25Q80.W, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25Q16.W, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25Q32.W, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25Q64.W, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25X10, 128 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25X20, 256 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25X40, 512 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25X80, 1024 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25X16, 2048 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25X32, 4096 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond W25X64, 8192 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Unknown SFDP-capable chip, 0 kB: Parsing JEDEC flash parameter table... done. Probing for AMIC unknown AMIC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Atmel unknown Atmel SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Eon unknown Eon SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Macronix unknown Macronix SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for PMC unknown PMC SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Sanyo unknown Sanyo SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Generic unknown SPI chip (RDID), 0 kB: probe_spi_rdid_generic: id1 0x1c, id2 0x7017 Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1 0x1c, id2 0x16 Found Eon flash chip "EN25QH64" (8192 kB, SPI). This chip may contain one-time programmable memory. flashrom cannot read and may never be able to write it, hence it may not be able to completely clone the contents of this chip (see man page for details). === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to flashrom(a)flashrom.org if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -VE, -Vw), and mention which mainboard or programmer you tested. Please mention your board in the subject line. Thanks for your help! Reading flash... done. Raw bitbang mode version 1 Bus Pirate shutdown completed.

2 1

Re: [flashrom] TYAN Computer Corp. S2721-533 Thunder i7501 Pro/S2721-533 Thunder i7501 Pro
by Bozhan Boiadzhiev 02 May '14

02 May '14

Hi, i can't remember exactly. I just remember that i didn't have any bad feelings, so i think i updated firmware successfully. PS. I don't have access to that motherboard anymore! Thanks Sorry >-------- Оригинално писмо -------- >От: Stefan Tauner stefan.tauner(a)alumni.tuwien.ac.at >Относно: Re: [flashrom] TYAN Computer Corp. S2721-533 Thunder i7501 Pro/S2721-533 Thunder i7501 Pro >До: Bozhan Boiadzhiev <bozhan(a)abv.bg> >Изпратено на: Петък, 2014, Май 2 21:57:15 EEST > Hello Bozhan, > > thanks for your report! I am just wondering what you want to tell us > with it. :) > Did you update the firmware successfully with flashrom on that board > or did you run into any problems? > -- > Kind regards/Mit freundlichen Grüßen, Stefan Tauner

1 0

flashrom -V of Acer EM61SM/EM61PM (Desktop)
by Benjamin Bellec 02 May '14

02 May '14

Hello, I succesfully flash the BIOS of an Acer Aspire T180 Desktop. Chipset seems to be Nvidia MCP61. At first reboot, motherboard doesn't boot and beep. I had to clear CMOS and then it's OK. As requested by flashrom, here is the flashrom -V : flashrom v0.9.6.1-r1705 on Linux 3.9.5-301.fc19.x86_64 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org flashrom was built with libpci 3.2.0, GCC 4.8.1 20130603 (Red Hat 4.8.1-1), little endian Command line (1 args): flashrom -V Using default programmer "internal". Calibrating delay loop... OS timer resolution is 1 usecs, 531M loops per second, 10 myus = 11 us, 100 myus = 107 us, 1000 myus = 999 us, 10000 myus = 9976 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Acer" DMI string system-product-name: "Aspire T180" DMI string system-version: "R01-A2" DMI string baseboard-manufacturer: "Acer" DMI string baseboard-product-name: "EM61SM/EM61PM " DMI string baseboard-version: " " DMI string chassis-type: "Desktop" Found ITE Super I/O, ID 0x8726 on port 0x2e Found chipset "NVIDIA MCP61" with PCI ID 10de:03e0. Enabling flash write... This chipset is not really supported yet. Guesswork... ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0 Flash bus type is LPC Found SMBus device 10de:03eb at 00:01:1 MCP SPI BAR is at 0x00000000 MCP SPI is not used. Please send the output of "flashrom -V" to flashrom(a)flashrom.org with your board name: flashrom -V as the subject to help us finish support for your chipset. Thanks. OK. Super I/O ID 0x8726 is not on the list of flash capable controllers. The following protocols are supported: LPC. Probing for AMIC A49LF040A, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x27, id2 0xa0, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST49LF020, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST49LF020A, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST49LF040, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for SST SST49LF040B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50 Found SST flash chip "SST49LF040B" (512 kB, LPC) at physical address 0xfff80000. Probing for SST SST49LF080A, 1024 kB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF160C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x49, id2 0x4d, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V040A, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Winbond W39V040B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Winbond W39V040C, 512 kB: probe_jedec_common: id1 0xbf, id2 0x50 Probing for Winbond W39V080A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W49V002A, 256 kB: probe_jedec_common: id1 0xbf, id2 0x50 Found SST flash chip "SST49LF040B" (512 kB, LPC). No operations were specified. Restoring PCI config space for 00:01:0 reg 0x6d Restoring PCI config space for 00:01:0 reg 0x90 Restoring PCI config space for 00:01:0 reg 0x8c Restoring PCI config space for 00:01:0 reg 0x88

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

flashrom