Re: [flashrom] [PATCH] Support for S25FL164K/S25FL132K

[Stefan Tauner]

On Sat, 3 May 2014 12:59:16 -0400
Nikolay Martynov  wrote:
> Hi.
>
> Yes, I was able to flash that this chip on arduino. I was hesitant
> to change value of .tested field because my setup was somewhat 'wacky'
> long wires and stuff, and flashing was not very stable. But this
>
> instability was probably due to
> my setup, not because of code/arduino/chip, so I guess you can change
> it to TEST_OK_PREW.

Ok, understood. There were a few minor error in your patch (unverified
facts copied from S25FL116K/S25FL216K which are actually wrong for the
S25FL116K too and should be fixed later). I hope I have changed things
to the better. I made a few other minor refinements and committed it in
r1786. Thanks again for the patch!